Construction of 01(one) 3 (three) seated sanitary latrine with septic tank, soak pit, tiles flooring etc. at HQr 9th Bn TSR (IR-IV) (near main office)

Earth work in excavation by mechanical means (Hydraulic excavator)/ Manual means foundation trenches or drains (not exceeding 1.5 m in width or 10sqm on plan) including dressing of sites and ramming of bottoms, lift up to 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lade of 50 m, (all kinds of soil)

Earth work in excavation by mechanical means (Hydraulic excavator)/ Manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5 m , disposed earth to be levelled and neatly dressed, ( all kinds of soil)

Supplying and filling in plinth, under floor, foundations etc. sand (fine) from local quarry with lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete .

Providing and laying position cement concrete of specified grade excluding the cost of cantering and shuttering – All work up to plinth level : i) 1:3:6 (1 Cement : 3 fine sand : 6 graded wall burnt brick aggregate 20mm nominal size)

ii) 1: 4: 8 ((1 Cement : 4 fine sand : 8 graded wall burnt brick aggregate 40mm nominal size)

First class brick work in foundation and plinth including cost of all materials as required complete:- (i) in cement mortar 1 : 4 ((1 Cement : 4 fine sand.)

First class brick work in super structure in triangular, square and rectangular fillers above plinth level including cost of all materials as required complete :- (iii) In cement mortar 1 : 4 ((1 Cement : 4 fine sand.)

Half bricks masonry work with first class bricks in super structure up to floor five level including cost of all materials as required complete : (iii) In cement mortar 1 : 4 ((1 Cement : 4 fine sand.)

Reinforced cement concerted work in veams suspended floors, roofs having slope up to 15o landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases up to floor five level excluding the cost of centring, shuddering, finishing and reinforcement. i) 1:2:4 (1 cement : 2 fine sand : 4 graded well burnt brick aggregate 20mm nominal size).

Reinforcement for RCC work including straightening , cutting, bending , placing in position and binding all complete up to plinth level. i) Thermo- Mechanically treated bars of grade Fe- 500D of more

12mm cement plaster of mix (i) In cement mortar 1 : 4 (1 cement : 4 fine sand )

15mm cement plaster on the rough side of single or half brick wall of mix. (i) In cement mortar 1 : 4 (1 cement : 4 fine sand )

Neat cement punning.

Steel work in built up tubular (Round, square or rectangular hollow tubes etc) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 1) Hot finished welded type tubs

Supply and instollation of pre-painted Galvalume sheets for roofing / cleadding (size, shape and pitch of corrugation as approved by Engineer- In-Charge ) 550 MPA steel grade, made out of cold rolled steel coated with zinc-alumium alloy coating of 43.5% ZN, 55 % AI and 1.5% silicon confirming to ASTM a 792-A 792M and AS 1397, alloy coating AZ 150/ AZ 70 , Clolur coated with high quality polister coating top quated of modified polyester of 20 micron , Back side coat of 5 micron , having epoxy primer coat of 5 micron on both side . Sheet should have protective guard film of 25 micron minimum avoid scratches while transportation and should be supplied single length up to 12 mtr or as desired by Eng.In. Charge. The sheet shall be fixed using self drilling / self tapping screws of size ( 5.5 X 55 mm with EPDM washers filled with white lid complete up to any pitch in Horizontal/ Vertical or Curved surfaces excloding the cost of purlins , rafters and trusses and including cutting to size and shape. Wherever required and as per direction of Eng.-In-Charge. i) 0.50mm thickness .

Supply & installation of pre-painted Galvalume sheets roofing accessories in 550mpa steel steel grade, made out of Cold rolled steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to AASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated withhigh quality polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side etc. complete as per direction of Engineer-in-charge. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation. The sheet shall be fixed using self drilling /self tapping screws with EPDM washers complete for Ridges/Valley/Gutter/Flashing of width 610 mm: i) 0.50mm thickness

Centering shuttering including strutting, propping etc. and removal of form work for suspended floors, roofs, landings ,valconies and access platform with timber planks.

Steel work welded in built up section/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved primer using steel etc. complete as required :- i) In grating, frames, Guard bar railing, brackets, gats and similar works, all complete .

Providing and fixing white vitreous china water cosetsqatting pan( Indian type) i) Orissa pattern W.C. Pan of size 580 X 440 mm

Providing and fixing 1st class quality ceramic gl;azed wall tiles confurmining to IS 15622- 2017 (thickness to be specified by the manufactureerr ) of approved make in all colours , shads or any size approved by the Eng-In-Charge in skirting risers of steps and dados , laid over 12mm thick bd of cement morter 1:3 ( 1 cement : 3 fine sand) jointed with ordinary cement slurry oincluding pointing with white cement mixed with pigment of matching shade etc. all complete as per direction of Eng.-In- Charge ( i) 450mm X 350mm in all sheds and design.

Providing and laying 1st class quality ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 - 2017 of approved make in colours such as White, Ivory,Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement: 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. all complete as per direction of the Engineer in-charge. (a) Mat Finish Tiles/ Anti-skid Tiles/ Glossy Tiles (i) 300 mm x 300 mm in all shades and designs

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg / cm2)conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal xpansion: (1) Single socketed pipe - 110 mm OD.

Providing and fixing on wall face unplsticised -PMC moude fittings/ accessories for unplasticised Rigid PBC Rail water soil, wast and vent pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gape for thermal expansion :- i) Bend 87.5 degree (a) 110mm

ii) Single equal tee with door (a) 110 X 110 X 110 mm

Distempering with 1st quality acrylic distemper (Ready mixed )having VOC content less than 50 gm/ ltr , of approved band and manufacture to given and even shade . Payment shall be made after submission of test certificate issued by the manufacture : New work (2 or more course) over and including water thinnable priming code with cement primer.

Finishing walls with acrylic smooth exterior paint of required shade of approved band and manufacture (Payment shall be made after submission of Test Certificated issued by the Manufacturer : New work ( Two or more coats applied @167 ltr per 10 sqm over and including priming coat of exterior primer applied @ 2.20 Kg /10 sqm.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give and even shade ( Payment shall be made after submission of Test Certificate issued by the Manufacturer : Two or more coats on new work over an under coat of suitable shade with ordinary paint (Primer) of approved band and manufacture

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes heaving thermal stability for hot and cold water supply including all CPVC plain & brass threaded fitting including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complats as per direction of Engineer in Change (a) 25 mm nominal outer dia. Pipes internal works-exposed on wall

(b) 15mm nominal outer dia. Pipes

Providing and fixing CP brass Bibcock of approved quality conforming to IS : 8931 (a) 15mm nominal bore

Constructing soak pit 1.20 x 1.20 x 1.20 m filed with brickbats including S.W drain pipe 100mm dia meter and 120m long complete as per standard design