Repair and Maintenance of factory area related to various civil works like masonry fabrication plumbing carpentry sanitation water supply etc. in BHEL HEEP Haridwar

Carriage of materials by mechanical transport including loading, unloading and stacking: Lime, moorum, building rubbish:3 km Unit:cum

Carriage of materials by mechanical transport including loading, unloading and stacking: Cement, stone blocks, G.I., C.I., A.C. & C.C. pipes below 100 mm dia. and other heavy materials:3 km Unit:tonne

Carriage of materials by mechanical transport including loading, unloading and stacking: Earth:3 km Unit:cum

Carriage of materials by mechanical transport including loading, unloading and stacking: Steel:3 km Unit:tonne

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.: All kinds of soil Unit:cum

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil:Pipes, cables etc. exceeding 80 mm dia. but not exceeding 600 mm dia Unit:metre

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Unit:cum

Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m.:All kinds of soil Unit:100sqm

Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. Unit:100sqm

Centering and shuttering including strutting, propping etc. and removal of form work for ::Foundations, footings, bases for columns Unit:sqm

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in::Cement mortar 1:4 (1 cement : 4 coarse sand) Unit:cum

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : :With cement mortar 1:4 (1 cement : 4 fine sand). Unit:Sqm

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : :Door chowkhats Unit:No.

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : :Window chowkhats Unit:No.

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground. :For door/ window/ clerestory window. Unit:Sqm

Refixing old glass panes with putty and nails Unit:Sqm

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : :Of area 3 sq. metres and below Unit:No.

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : :75 to 80 mm dia pipe. Unit:m

Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (the good earth shall be paid for separately). Unit:100 sqm

Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. Unit:100 sqm

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge.. Unit:Cum

Uprooting rank vegetation and weeds by digging the area to a depth of 60cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. Unit:100 sqm

Lettering on the Mild Steel / concrete / wood / flax board surface with synthetic enamel paint of approved brand and manufacture. The board would be painted to give an even and smooth finish of uniform shade. After painting the base coat lettering should be done of uniform size and texture as directed by engineer incharge.

FIXING OF AVAILABLE PROFILED GALVALUME SHEETING AND FLASHING IN ROOFS/CLADDING FOR ALL HIGHT AS REQUIRED BY MEANS OF GALVANIZED SELF DRILLING SELF TAPPIING FASTENERS (12-14X55 WITH EPDM SEALS) AT RECOMMENDED SPACINGS FOR ALL HEIGHTS IN WORKSHOPS AND BUILDINGS INCLUDING ALL REPAIR/RECTIFICATION(CLOSING OF HOLES ETC.) REQUIRED WHEREVER AND CARTAGE OF ALL SHEETS TO SITE PROVIDED FREE OF COST AT DESIGNATED STORE COMPLETE AS PER DIRECTION OF ENGINEER IN CHARGE.

CLEANING OF AC/STEEL/GI ROOF SHEETING CRANE GIRDER TOP, PLATEFORMS, GUTTERS/DRAIN PIPES INCLUDING ALL TOOLS AND TACKLES REQUIRED FOR CLEARING AND DISPOSAL UP TO 2 KM OF DUST/RUBBISH ETC.GENERATED/COLLECTED DURING CLEARING PROCESS, COMPLETE IN ALL RESPECT AS PER DIRECTION OF ENGINEER INCHARGE.

UP KEEPING AND CLEANING OF ALL TYPE OF FLOOR AND WALL INCLUDING CERAMIC TILE/MARBLE, GRANITE, CARPETS ETC IN OFFICE SPACE WITH BROOMS AND FLOOR MOPPEDAS PER DIRECTION OF ENGINEER IN-CHARGE INCLUDING PICKING DEBRIS /GARBAGE TO DESIGNATED SPOT/DUSTBINS AS DIRECTED BY ENGINEER IN-CHARGE UP TO A LEAD OF 50 M. ALL DISINFECTANT (PHENYL) /BROOM/ MOP/ MATERIALS FOR PROPER CLEANING OF THE JOB SHALL BE PROVIDED BY BHEL.

UP KEEPING AND CLEANING OF TOILET FLOORS, WALL TILES, WASHBASINS, WC PANS, URINALS ALL CP FITTINGS ETC.AS PER DIRECTION OF ENGINEER IN-CHARGE INCLUDING PICKING DEBRIS /GARBAGE TO DESIGNATED SPOT/DUSTBINS AS DIRECTED BY ENGINEER IN-CHARGE UP TO A LEAD OF 50 M. ALL DISINFECTANT (PHENYL) / ACID / HARPIC / MATERIALS FOR PROPER CLEANING OF THE JOB SHALL BE PROVIDED BY BHEL

SWEEPING & CLEANING OF SPECIFIED AREA / BOTH SIDES OF ROAD / STREET / PATHWAYS AS PER DIRECTION OF ENGINEER IN-CHARGE INCLUDING PICKING/COLLECTION & DUMPING OF ALL DEBRIS/TRASH/GARBAGE TO DESIGNATED SPOT/DUSTBINS AS DIRECTED BY ENGINEER IN-CHARGE UP TO A LEAD OF 50 M. ALL TOOLS/ TACKLES/ MATERIALS FOR PROPER EXECUTION OF THE JOB SHALL BE PROVIDED BY BHEL

DEMOLISHING CEMENT CONCRETE/ R.C.C. WORK/ BRICK WORK MANUALLY/ BY MECHANICAL MEANS INCLUDING DISPOSAL OF MATERIAL WITHIN 50 METRES LEAD AS PER DIRECTION OF ENGINEER - IN - CHARGE.

CLEARING WILD GROWTH BY CUTTING PLANTS/ VEGETATION, GASHES/ GRASS ETC. OF GIRTH UPTO 30CM AT BASE (GROUND LEVEL) AND/ OR HEIGHT UPTO 4METERS REMOVAL OF JUNGLE AND DISPOSAL WITH IN 50METERS INCLUDING ALL LABOUR T&P ETC. REQUIRED FOR PROPER COMPLETION OF THE WORK AS PER DIRECTION OF ENGINEER INCHARGE.

CLEANING OF OPEN STORM WATER DRAINAGE OF 2 SQM TO 4 SQM CROSS SECTIONAL AREACLEANING OF OPEN STORM WATER DRAINAGE OF 2 SQM TO 4 SQM CROSS SECTIONAL AREA OR COVERED STORM WATER DRAIN, OPEN NALA, CULVERTS ETC. AT VARIOUS LOCATION (INSIDE/ OUTSIDE PLANT PREMISES) BY MANUAL OR MECHANICAL MEANS, INCLUDING LEVELING & DRESSING OF UPPER OUTER SURFACE UP TO 30 CM IN DEPTH WITHIN RANGE OF 01 MTR TOWARD OUTSIDE FROM THE EDGE OF DRAINAGE (BOTH SIDES). CLEANING INCLUDES EXCAVATING & REMOVING OF ALL MALBA, RUBBISH, DEPOSIT SILT ETC. AND CUTTING OF ALL WILD GROWTHS, GRASS, BUSHES ETC. BY DEPLOYING SKILL/ UNSKILLED LABOUR ALONG WITH DISPOSAL OF ALL THE WASTE/ RUBBISH UP TO 02 KM DISTANCE AS PER DIRECTION OF ENGINEER I/C, BY APPLYING PROPER T&P AND SAFETY MEASURES FOR PROPER COMPLETION OF WORK.

ATTENDING TO DAY TO DAY COMPLAINTS OF FACTORY BUILDINGS / BLOCKS PERTAINING TO MASONRY WORKSUCH AS PATCH REPAIR OF PLASTER (UPTO 1.00 SQM), CC FLOORING (UPTO 1.00 SQM) INCLUDING CUTTING IN SHAPE & MAKING GOOD IN RECTANGULAR SHAPE, DISMANTLING OF CC/ BRICK WORK (UPTO 0.3 CUM), MISC. BRICK WORK REPAIR (UPTO 0.3 CUM), TILES REPAIR WORK (UPTO 0.5 SQM), ROOF/ TERRACE RAIN WATER PIPE (EACH), FIXING FAN HOOK (EACH), CHOUKHAT (EACH), PALMATE (EACH) AND OTHER SIMILAR NATURE OF PETTY ACTIVITIES, INCLUDING DISPOSAL OF ALL DISMANTLED MATERIALS TO NEAREST DUST BIN. THE CONTRACTOR SHALL ENSURE THE AVAILABILITY OF MINIMUM ONE MASON AND ONE HELPER TO ATTEND ON AN AVERAGE FIVE COMPLAINTS EVERYDAY ON DIFFERENT LOCATIONS/ FLOORS/ BUILDINGS AS PER DAILY REQUIREMENT / DIRECTION OF ENGINEER-IN-CHARGE. ALL THE MATERIAL REQUIRED TO CARRYING OUT THE WORK SHALL BE ISSUED BY THE DEPARTMENT FREE OF COST AT CONCERNED MAINTENANCE STORE. ANY COMPLAINT WHICH CARRIES QUANTITY BEYOND THE ABOVE SPECIFIED LIMIT SHALL BE MEASURED AS 2 NOS. OF COMPLAINTS AND SO ON.

ATTENDING OF DAY-TO-DAY COMPLAINTS OF FACTORY BUILDINGS/ BLOCK PERTAINING TO CARPENTRY WORKSUCH AS: EASING OF DOOR/ WINDOW SHUTTERS/SHELVES/DRAWERS, REPLACING OF REQUIRED FITTING IF NECESSARY; REMOVAL, CUTTING & RE-FIXING OF GLASS PANES; MISC. REPAIR WORKS IN FALSE CEILINGS, FIXING OF DISPLAY BOARDS, A.C.FRAMES, PELMETS & CURTAINS FITTINGS, FURNITURE ITEMS, WOODEN PARTITION ETC.SIMILAR MISC PETTY ACTIVITIES. THE CONTRACTOR SHALL ENSURE THE AVAILABILITY OF ALL REQUIRED TOOLS AND PLANTS, ONE CARPENTER AND ONE HELPER ON REGULAR BASIS TO ATTEND ON AN AVERAGE SEVEN COMPLAINT EVERYDAY FOR TIMELY COMPLETION. THE LABOURS ENGAGED SHALL ATTEND COMPLAINTS AT DIFFERENT LOCATIONS/ FLOORS/ BUILDINGS AS PER DAILY REQUIREMENT / DIRECTION OF ENGINEER-IN-CHARGE. ALL THE MATERIAL REQUIRED TO CARRYING OUT THE WORK SHALL BE ISSUED BY THE DEPARTMENT FREE OF COST AT CONCERNED MAINTENANCE STORE.

ATTENDING OF DAY-TO-DAY COMPLAINTS/PREVENTIVE MAINTENANCE OF FACTORY BUILDINGS/ BLOCK PERTAINING TO PLUMBING WORK. VIZ REPAIR OF LEAKAGE OF TAPS, STOP COCKS, PILLAR COCKS,BIB COCKS, DIFFERENT VALVES, ETC. ; REPAIR & STOPPAGE OF OVER FLOWING CISTERNS, OVERHEAD TANKS, DAMAGED GI PIPES OF ALL SIZES; REPLACEMENT OF ABOVE FITTINGS IF REQUIRED, SWG PIPES/FITTINGS, REPAIR/REPLACEMENT OF DAMAGED WC SEATS (INDIAN/EUROPEAN) ,URINALS, WASH BASINS/SINKS, S/ P/BOTTLE TRAPS ETC. AND OTHER SIMILAR MISC PETTY ACTIVITIES INCLUDING RELATED FITTINGS AS PER DIRECTION OF ENGINEER I/C. THE CONTRACTOR SHALL ENSURE THE AVAILABILITY OF ALL REQUIRED TOOLS AND PLANTS, MINIMUM OF ONE PLUMBER AND ONE HELPER ON REGULAR BASIS TO ATTEND ON AN AVERAGE EIGHT COMPLAINT EVERYDAY FOR TIMELY COMPLETION AND ALSO DO PREVENTIVE MAINTENANCE ACTIVITIES OF PLUMBING WORKS. THE LABOURS ENGAGED SHALL ATTEND COMPLAINTS AT DIFFERENT LOCATIONS/ FLOORS/ BUILDINGS AS PER DAILY REQUIREMENT / DIRECTION OF ENGINEER-IN-CHARGE. ALL THE MATERIAL REQUIRED TO CARRYING OUT THE WORK SHALL BE ISSUED BY THE DEPARTMENT FREE OF COST AT CONCERNED MAINTENANCE STORE.

ATTENDING DAY TO DAY COMPLAINTS OF FACTORY BUILDINGS / BLOCKS PERTAINING TO WATER LEAKAGE, SEEPAGE, CHOCKING, OVERFLOWING ETC. THROUGHOUT THE ROOF DRAINAGE SYSTEM. SUCH COMPLAINTS SHALL BE RESOLVED BY REMOVAL OF OLD TAR FELT (UPTO 2 SQM), REMOVAL OF COMPOUND (UPTO 1 SQM), REMOVAL OF DEPOSITED MALBA/ RUBBISH (UPTO 10 SQM), REPLACING/ REPAIRING OF DEFECTIVE SHEET (UPTO 5 SQM), REPLACING/ REPAIRING OF DOWN TAKE PIPE (UPTO 1 METER), REPLACING/ REPAIRING OF ROOF GUTTER (UPTO 1 METER), RENEWING OF GUTTER JOINTS (UPTO 10 NOS.), REFIXING OF SHEET/ DOWN TAKE PIPE (UPTO 5 SQM/ 1 METER), APPLICATION TARFELT (UPTO 1 SQM), APPLICATION OF PANIROK (UPTO 1 SQM OR 10 NOS. OF JOINTS) AND OTHER SIMILAR NATURE OF PETTY ACTIVITIES, INCLUDING DISPOSAL OF ALL REMOVED MATERIALS TO NEAREST DUST BIN UP TO 1 KM LEAD. THE CONTRACTOR SHALL ENSURE THE AVAILABILITY OF MINIMUM ONE SKILLED, ONE SEMI-SKILLED AND TWO UNSKILLED WORKMEN TO ATTEND ON AN AVERAGE 2 NOS. COMPLAINTS EVERYDAY. CONTRACTOR WILL ENSURE THE AVAILABILITY OF ALL REQUIRED SAFETY PPES TO WORK UPON DIFFERENT LOCATIONS & HEIGHT AT AC SHEET ROOFS/ GUTTERS/ DOWN TAKE PIPES AS PER DIRECTION OF ENGINEER-IN-CHARGE. ALL THE MATERIAL REQUIRED TO CARRYING OUT THE WORK SHALL BE ISSUED BY THE DEPARTMENT FREE OF COST AT CONCERNED MAINTENANCE STORE. ANY COMPLAINT WHICH CARRIES QUANTITY BEYOND THE ABOVE SPECIFIED LIMIT SHALL BE MEASURED AS 2 NOS. OF COMPLAINTS AND SO ON.

DISPOSAL/ REMOVAL OF GARBAGE/ CHIPS/ SWARF OR OTHER SCARP ETC. THROUGH TRACTOR TROLLY/ TRUCK/ DUMPER FROM DIFFERENT LOCATIONS/ BUILDINGS/ SHOPS TO VARIOUS SCARP YARD OR OTHER AREAS AS PER DIRECTION OF ENGINEER-IN-CHARGE AND BASIS ON DAILY REQUIREMENT.TRACTOR TROLLY/ TRUCK/ DUMPER WILL BE PROVIDED BY BHEL INCLUDING ITS FUEL, MAINTENANCE & OTHER RUNNING EXPENDITURES. CRANE, LIFTER, LOADER ETC, IF REQUIRED FOR LOADING/ UNLOADING, SHALL ALSO BE ARRANGE BY CONCERNING DEPARTMENT ITSELF. THIS ACTIVITY SHALL BE MEASURED BY 'NUMBERS OF TRIP' LIMIT UPTO 2 KM FOR EACH TRIP, WITH COMPLETE TO & FRO MOVEMENT.

MAINTENANCE OF EARTHEN POTTED PLANTS DISPLAYED AT GROUND FLOOR ONLY IN , OFFICE/ PLANT AREA INCLUDING APPLICATION OF GOOD EARTH, MANURE, INSECTICIDE, PESTICIDE AND FERTILIZER, REMOVINGOF DRY PARTS BY PRUNING, CLEANING DRY LEAVES AND DISPLAYING IN APPROPRIATE PLACE AND REPLACEMENT OF BROKEN POTS COLORING OF POTS AND CHANGE OF LOCATION OF POTS AND REPLACING WITH FRESH PLANTS AS AND WHEN REQUIRED (MATERIALS PROVIDED BY BHEL) AS PER DIRECTION OF OFFICER IN CHARGE

CUTTING OF DESIGNER HEDGE/EDGE REMOVING OF CUT MATERIALS, CLEANING, HOEING OF HEDGE/EDGE BED WATERING MANURE AND APPLYING INSECTICIDES AND FUNGICIDES ETC(EXCLUDING THE COST OF MATERIAL WHICH SHALL BE SUPPLIED BY BHEL) AND AS PER DIRECTION OF OFFICER IN CHARGE

ATTENDING DAY TO DAY COMPLAINTS OF FACTORY BUILDINGS /BLOCKS PERTAINING TO FRESH WATER AND REUSED INDUSTRIAL WATER LINE REPAIR WORK OF VARIOUS SIZES GI &MS LINE UPTO 2 METER HEIGHT.ARRESTING LEAKAGE IMMEDIATELY ,CLAMPING ,LINE REPLACEMENT ,FIRE HYDRANT REPAIR,LANDING VALVE REPLACEMENT ,GLOBE VALVE ,GATE VALVE REPLACEMENT.CONTRACTOR SHALL ENSURE THE AVAILABILITY OF MINIMUM ONE PLUMBER,WELDER ,HELPER ON REGULAR BASIS TO ATTEND ON AN AVERAGE FOUR COMPLAINTS DAILY UPTO 2 METER HEIGHT AS PER DIRECTION OF ENGINEER INCHARGE (ALL THE REQUIRED MATERIAL USED IN REPAIRING SHALL BE SUPPLIED BY BHEL FREE OF COST)

ATTENDING DAY TO DAY COMPLAINTS OF FACTORY BUILDINGS /BLOCKS PERTAINING TO FRESH WATER AND REUSED INDUSTRIAL WATER LINE REPAIR WORK OF VARIOUS SIZES ,GI AND MS LINE ABOVE 2 METER HEIGHT.ARRESTING LEAKAGES IMMEDIATELY ,CLAMPING ,LINE REPLACEMENT ,VARIOUS VALVE RTEPLACEMENT ,NEW CONNECTION ETC.CONTRACTOR SHALL ENSURE THE AVAILABILITY OF ONE PLUMBER,ONE WELDER , 2 HELPERS TO ATTEND ON AN AVERAGE TWO COMPLAINTS DAILY ABOVE 2 METER HEIGHT AS PER DIRECTION OF ENGINEER IN CHARGE (ALL THE REQUIRED MATERIAL USED IN REPAIRING SHALL BE SUPPLIED BY BHEL FREE OF COST).

OPERATION OF TUBEWELLS AND GRV MOTORS (ROUND THE CLOCK) OPERATION OF TUBEWELL AND GRV MOTORS MANUALLY ,VALVE OPENING CLOSE ,ON /OFF MOTORS).OPEATION OF TUBE WELLS GRV MOTORS /VALVE OPENING CLOSE /ON /OFF MOTORS .NOTE DOWN THE PARAMETERS VOLTAGE ,CURRENT , FLOW RATE AS PER OPERATIONAL SCHEDULE ,DEPLOYMENT OF PUMP OPERATOR (ROUND THE CLOCK) FOR GRV PUMPS AND TUBEWELLS AS PER OPERATION SCHEDULE AND DIRECTION OF ENGINEER INCHARGE .

MOTOR TESTING /DISMANTLE/ASSEMBLY (INDUCTION ,SUBMERSIBLE ,POLDER )MAINTENANCE PERTAINING TO WATER SUPPLY ACTIVITES PERFORMED AT GRV-1 &GRV-5 .MOTOR TESTING /DISMANTLE /ASSEMBLY (INDUCTION ,SUBMERSIBLE,POLDER UPTO 100 HP) /REPLACEMENT OF NON WORKING PARTS /FAULTY ITEMS.THE CONTRACTOR SHALL ENSURE ONE ELECTRICIAN ,ONE FITTER ,TWO HELPERS ON REGULAR BASIS TO ATTEND TIMELY COMPLETION OF MAINTENANCE SERVICES.ALL THE MATERIAL REQUIRED TO CARRY OUT THE WORK SHALL BE ISSUED BY BHEL FREE OF COST AT CONCERENED MAINTENANCE STORE AS DIRECTED BY ENGINEER INCHARGE.

GLAND FITTING /GLAND REPLACEMENT /GREASING/OILING TO VARIOUS PUMPS /MOTORS /VALVESMAINTENANCE PERTAINING TO WATER SUPPLY ACTIVITIES PERFORMED AT GRV-1&GRV-5.MAINTENANCE ACTIVITES COVERING GLAND FITTING /GLAND REPLACEMENT /GREASING /OILING TO VARIOUS PUMPS /MOTORS /VALVES .THE CONTRACTOR SHALL ENSURE THE AVAILABILITY OF MINIMUM ONE FITTER HAVING KNOWLEDGE OF ALL PUMPING MACHINERY,ONE HELPER ON REGULAR BASIS TO ATTEND TIMELY COMPLETION OF MAINTENANCE SERVICES .ALL THE MATERIAL REQUIRED TO CARRYING OUT THE WORK SHALL BE ISSUED BY THE BHEL FREE OF COST AT CONCERNED MAINTENANCE STORE AS PER DIRECTION OF ENGINEER INCHARGE.

SHAFT /COUPLING REPLACEMENT /BEARING AND BUSH FITTING /IMPELLER FITTING/PUMP TO MOTOR FITTING THROUGH GRV SLOTS/CENTRIFUGAL/SUBMERSIBLE /MONOBLOCK/BOOSTER/POLDER PUMP UPTO 100 HP.MAINTENANCE PERTAINING TO WATER SUPPLY ACTIVITIES PERFORMED AT GRV-1&GRV-5. SHAFT REPLACEMENT/COUPLING REPLACEMENT/BEARING AND BUSH FITTING /IMPELLER FITTING/PUMP TO MOTOR FITTING THROUGH GRV SLOT /CENTERFUGUAL /SUBMERSIBLE /MONOBLOCK/BOOSTER /POLDER PUMPS UPTO 100 HP PUMP FITTING/INCLUDING REPLACEMENT OF NON -WORKING PARTS /FAULTY ITEMS .THE CONTRACTOR SHALL ENSURE THE AVAILABILITY OF MINIMUM ONE FITTER,HAVING KNOWLEDGE OF ALL PUMPING MACHINERY,ONE WELDER,ONE HELPER ON REGULAR BASIS TO ATTEND TIMELY COMPLETION OF MAINTENANCE SERVICES .ALL THE MATERIAL REQUIRED TO CARRYING OUT THE WORK SHALL BE ISSUED BY THE BHEL FREE OF COST AT CONCERNED MAINTENANCE STORE AS PER DIRECTION OF ENGINEER INCHARGE.

MAINTENANCE PERTAINING TO WATER SUPPLY ACTIVITES PERFORMED AT GRV'S AND TUBEWELLS . MINOR /PANALS RELATED FAULT IDENTIFICATION /RECTIFICATION/ PANALS CLEANING /NEW CONNECTIONS /REPLACEMENT OF NON WORKING PARTS /FAULTY ITEMS.THE CONTRACTOR SHALL ENSURE THE AVAILABILTY OF MINIMUM ONEONE ELECTRICAN ,ONE HELPER ON REGULAR BASIS TO ATTEND TIMELY COMPLETION OF MAINTENANCE SERVICES.ALL THE MATERIAL/CONSUMABLES REQUIRED TO CARRY OUT THE WORK SHALL BE ISSUED BY BHEL FREE OF COST AT CONCERNED MAINTENANCE STORE AS DIRECTED BY ENGINEER INCHARGE.

WATER PROOF CABLE JOINTING /MAJOR FAULTSMAINTENANCE PERTAINING TO WATER SUPPLY ACTIVITES PERFORMED AT GRV'S AND TUBEWELLS .WATER PROOF CABLE JOINTING /NEW CONNECTIONS/ MAJOR FAULTS /REPLACEMENT OF NON WORKING PARTS /FAULTY ITEMS.THE CONTRACTOR SHALL ENSURE ONE ELECTRICIAN TWO HELPERS ON REGULAR BASIS TO ATTEND TIMELY COMPLETION OF MAINTENANCE SERVICES .ALL THE MATERIAL/CONSUMABLES REQUIRED TO CARRY OUT THE WORK SHALL BE ISSUED BY BHEL FREE OF COST AT CONCERNED MAINTENANCE STORE AS DIRECTED BY ENGINEER IN CHARGE .

PERFORMING THE BLEACHING /DOZING ACTIVITY AT GROUND WATER RESERVIOR(GRV)INCLUDING HANDLING OF BLEACHING POWDER FROM THE DEPARTMENT STORE TO GRV AND DISPOSAL OF SLUDGE FROM BLEACHING MIXING TANK TO SPECIFIED LOCATION AS PER DIRECTION OF ENGINEER IN CHARGE..THE CONTRACTOR SHALL ENSURE AVAILABILITY OF MINIMUM 1 SKILLED HELPERS AND 1 UNSKILLED HELPERS ON REGULAR BASIS TO ATTENT TIMELY COMPLETION OF SERVICES .ALL THE MATERIAL/CONSUMABLES REQUIRED TO CARRYING OUT THE WORK SHALL BE ISSUED BY BHEL FREE OF COST FROM CONCERENED STORE AS DIRECTED BY ENGINEER IN CHARGE.

ATTENDING TO DAY TO DAY COMPLAINTS OF FACTORY AREA PERTAINING TO STEEL CUTING, REPAIRING WORKS LIKE FABRICATION/ ERECTION OF VARIOUS STEEL STRUCTURAL FRAMEWORK, GATES, POSTS, LADDERS, CHEQUERED PLATFORMS, COLUMNS, BEAMS, RAILINGS, BRACINGS, FRAMES ETC IN ROLLED ORBUILT-UP SECTIONS (LIMITED TO 25 KG AGAINST EACH COMPLAINT), AND OTHER SIMILAR NATURE OF PETTY ACTIVITIES UPTO THE HEIGHT OF 5 METERS , INCLUDING CUTTING, DRILLING, FIXING, ALIGNING, WELDING, BOLTING, CARRIAGE OF STRUCTURAL STEEL, SHIFTING OF BUILDING/STURUCTURAL MATERIAL FROM ONE PLACE TO ANOTHER PALCE WHENEVER REQUIRED AS PER DIRECTION OF ENGINEER I/CHARGE. WHEREVER HEIGHT OF THE WORKS EXCEEDS FROM 5 METER, IT WILL BE MEASURED AS AN ADDITIONAL COMPLAINT FOR EVERY ADDITIONAL HEIGHT OF 5 METER. THE CONTRACTOR SHALL ENSURE THE AVAILABILITY OF MINIMUM ONE FITTER/ WELDER AND ONE HELPER TO ATTEND ON AN AVERAGE FOUR COMPLAINTS EVERYDAY ON DIFFERENT LOCATIONS/ FLOORS/ BUILDINGS/ SHOPS AS PER DAILY REQUIREMENT / DIRECTION OF ENGINEER-IN-CHARGE. ALL THE MATERIAL REQUIRED TO CARRYING OUT THE WORK SHALL BE ISSUED BY THE DEPARTMENT FREE OF COST AT CONCERNED MAINTENANCE STORE.

STEEL WORK, RIVETED, BOLTED OR WELDED IN BUILT UP/ ROLLED SECTIONS/ FRAMED WORK SUCH AS COLUMN, TRUSSES, PLATEFORM, GRATINGS, FRAMES, GUARD BAR, LADDER, RAILINGS, BRACKETS, GATES AND SIMILAR WORKS INCLUDING FABRICATION, ERECTION, HOISTING, ALIGNMENT, BOLTING, PRIMER, CARRIAGE/ SHIFTING OF MATERIALS/ EQUIPMENTS, T&P ETC AS PER DIRECTION OF ENGINEER I/CHARGE. SUPPLY OF ALL REQUIRED STEEL MEMBERS/ SECTIONS, ELECTRIC CUTTER M/C, DRILL M/C AND OTHER EQUIPMENTS, T&P, WELDING ELECTRODES, GASES ETC. WILL BE FREE OF COST AT CONCERNED MAINTENANCE STORE.

Please Enable Macros to View BoQ information