Karnataka

AOC

Works

Other Works

Providing Civil Works to Fountain Channels and Pathway tiles, upgradation of Water fountains with lights, Moving heads and Dynamic nozzles at S3 Tarrace in South Brindavan Garden.

Cauvery Neeravari Nigam Limited

CNNL KRS Div KR Sagar | Karnataka

Amount: ₹4.0 CrCloses: 27 Dec 2025Closed

Timeline

Published11 Dec 2025
Closed27 Dec 2025
Awarded—

Bids

1 Bid27 Dec 2025

#	Company	Amount	Status
1	Ms S NARAYANA REDDY ₹4.3 Craccepted-aoc	₹4.3 Cr	accepted-aoc

Tender Value

₹4.0 Cr

EMD Value

₹5.9 L

Closing Date

27 Dec 2025, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Cauvery Neeravari Nigam Limited

Contact Person

Shivu Kumar

Mobile Number

Work Description

Providing Civil Works to Fountain Channels and Pathway tiles, upgradation of Water fountains with lights, Moving heads and Dynamic nozzles at S3 Tarrace in South Brindavan Garden.

Tender Information

Tender ID

CNNL/2025-26/OW/WORK_INDENT4130

Reference Number

CNNL/2025-26/OW/WORK_INDENT4130

Tender Type

Open

Product Category

Other Works

Form of Contract

Two Tender Document System(Two Cover)

Location

CNNL KRS Div KR Sagar

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredGST Registration Certificate

RequiredContractor Registration Certificate

RequiredAnnual Financial Turnover Certificate from CA with UDIN AND ITR of last Five years

RequiredKey equipment details.

RequiredSimilar nature of work done Certificate

RequiredWork done certificate for execution of quantities

Requiredkey persons details.

RequiredIncome Tax details

RequiredLine of credit certificate in required format

RequiredBid capacity details

Eligibility Criteria

Tenders from Joint ventures are acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.-NOT APPLICABLE

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Conditional tenders will not be accepted.

The intending bidder should furnish the certificate of registration issued by state/ central Govt

The Tenderer should furnish the Name of the individual / firm/ Company/ Joint venture with address and telephone number with place of registration, year of incorporation etc.

The Intending bidder are advised to visit the site of work and access the tender documents well in advance.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs

The tender processing fee will not be refunded

The employer is not responsible for any delay in accessing Karnataka Public Procurement Portal.

The requisite Earnest Money Deposit (EMD) Through ONLINE only With validity from the date of opening of the tender. The tender schedule will be issued to the applicants who make payment through ONLINE only. Tenders received without valid EMD through e- payment will be rejected. Under this section of qualifying criteria the tenderer should furnish capacity details / format.

All the formats prescribed in the bid document shall be filled by the bidders in a complete manner. Incomplete formats may constitute sufficient reason at the discretion of CNNL for rejection of the bid

All scanned documents to be uploaded shall be in original and the Executive Engineer will verify the original documents at any stage before recommending for approval. Bidders should produce their original documents for verification during office hours related to uploaded documents in e-portal within 3 days of opening of technical Bid

Further particulars, if any, required by the bidders can be had from the office of the Executive Engineer, KRS Division, Krishnarajasagara, during office hours on all working days. It may be noted that if any of the calendar of any event mentioned above happen to be General Holiday / Declared holiday, the next working day will hold good for the respective events

Defect liability period is THREE YEARS from the date of completion of the entire work, after issuing of work completion certificate from CNNL.

Tenderers shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by the Government of Karnataka.

The tenderer should furnish the Name of the individual / firm/ Company/JV with address and telephone number with place of registration, year of incorporation etc

The application made by the firm / company/JV shall be signed by a person holding the power of attorney, in which case the Tenderer should furnish a copy of power of attorney shall be submitted

Necessary certificates should be signed by an officer not below the rank of the Executive Engineer or equivalent competent authority and should be countersigned by the superior officer not below the rank of Superintending Engineer or equivalent competent authority.

The intending Bidder/firm/company/JVshall provide accurate information on the related form about any litigation or Arbitration resulting from contracts completed or on going under its execution over the last five years. The consisting history of awards against the tenderer may result in failure of the application.

Tenderer should furnish a copy of the Income Tax Return for the last five financial year (2020-21 to 2024-25)

The intending Bidder/firm/company/JV shall provide the audited balance sheets or other financial statements acceptable to the employer for the last five years (2020-21 to 2024-25) and must demonstrate the current soundness of the applicants financial position and indicate its prospective long term profitability. If deemed necessary the employer shall have the authority to make enquiries with the applicants bankers.

The Tenderer should furnish a valid copy of GST Registration Certificate.

Employees provident fund registration certificate along with copy of recent paid challan is to be furnished.

Employees Provident fund Registration Certificate a)In respect of Contractors who are not registered with the EPF (Employees Provident Fund) authorities, the contractors should produce an undertaking that he shall within 7 days of the close of every month submit to the Executive Engineer, KRS Division, Krishnarajasagara, a statement showing the recoveries of contributions in respect of employees employed are through in and shall also furnish under the provision of the scheme to the commissioner, EPF b) However, having given an undertaking to this effect if the contractor does not furnish the information, the Nigama will deduct the necessary amount from the amount due from the contractor.Not withstanding the above, the contractor will be liable for any consequential penalty /damages levied by the EPF authorities.

The intending bidders are advised to visit the site of work before attending the pre- bid meeting and also before submitting the tenders.

Royalty Charges shall be recovered as per the prevailing rates by the Department of Mines and Geology.

The rates quoted by the contractor must be inclusive of all Taxes, etc., (including GST). The contractor is also required to pay quarry Fees, Royalties, Octroi Dues levied by the state Government or any Local body or an authority and ground rent, if any, charged by the Executive Engineer for stacking materials. No Extra Payment on this account will be made to the contractor.

GST will be deducted as per the prevailing Govt Orders from time to time in running bill

Increase in GST shall not be paid in extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time

Materials like steel, cement etc., required for the work shall be procured by the Contractor themselves and should get the same tested by the quality control authority of CNNL/ Karnataka Research station, if not by any NABL accredited labs before use in this work.

The work includes all lead and lift / delift and work shall be carried out as per instruction of engineer-in-charge of the work. And all the specification as per relevant Indian standard codes. The rate for the specifications in the Schedule-B includes all lead and lift, irrespective of distance and height.

Security Deposit Will be withheld till the expiry of the defect liability period.

Building and other construction workers welfare cess The contractor shall subscribe 1.00% of gross amount of each bill payable to him in respect of contract to the building and other construction workers welfare cess as per GO No: LD 300 LET 2006, Bangalore, dated: 18-01-2007. The amount of subscription will be recovered out of payable amount to him in each bill.This component is deemed to have been included in the quoted rate / Item rate.

The contractors should adhere to the accepted action plan submitted by him under any circumstances without linking to the pending payment of the work.

Sub leasing /subcontracting in any form is prohibited. Bids of bidders with track record of Subleasing/subcontracting are liable for rejection.

The quarries considered are for the estimate purpose only. The intending bidders shall visit the site, identify the quarries, ascertain availability for the quantity and quality of the materials required for the work and shall quote his rates accordingly. No extra claim whatsoever will be entertained in this regard.

On account of restrictions on sand mining and scarcity of availability of sand, as an alternative the use of manufactured sand (M-sand)confirming to relevant IS specifications may be allowed during the remodeling work

The rates includes all leads and lifts and work shall be carried out as per the instruction of Engineer-in-charge. All specifications are as per relevant IS codes in vogue and Indian Road Congress. The rates for the specification in the Schedule-B includes all lead and lifts irrespective of the distance and height, no extra claim will be entertained for additional lead and lifts.

The contractor should have capacity of deploying centralized batching plant along with The transit mixture during execution of concrete works for both structures and lining.

Successful Bidder should submit the PERT Chart at the time of Execution of Agreement.

Successful bidder should execute work agreement within 20 days from the date of issue of Letter of acceptance, failing which his tender will be cancelled on Risk & Cost basis & his EMD will be forfeited

Related to qualification condition No :2, Idle charges for men & machineries for non- progress period delayed due to any reasons will not be paid.

As per FD GO dated 26.03.2019, NSIC exemption for EMD is not accepted.

CNNL reserves the right of rejecting all or any of the tenders without assigning any reasons.

Typo graphical errors if any will not be the ground for any claims by the contractor.

The undersigned reserves the right to either postpone or to cancel the entire process of tender.

Conditions as per bid document.

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

The intending bidder/firm/company should have Executed in any one yearthe following minimum quantities of work in the last five years satisfactorily (2020-21 to 2024-25):Cement Concrete(cum)-390.00,glass mosaic tiles Outdoor vitrified Tiles(Sqm)-5335.00, SS pipe(Mtr)-280.00,submersible pumps(Nos)-45,DMX512-IP 68 rating LED under water lights(Nos)-210,submersible cables(Roll)-70 NOTE: The criteria above applies to the Individual bidder/Firm/ also. Certificate regarding the same duly signed by an officer not below the rank of the Executive Engineer should be submitted along with the technical bid

Work Done Certificate

The intending Bidder/Firm/comapny should have Satisfactorily completed (at least 90% of the contract value), as prime contractor at least one similar work such as Upgradation, Conceptualizing, Designing & Implementing water fountains with civil works of value not less than Rs. 197.65 Lakhs (usually not less 50% estimated value of contract during the last five financial years from 2020-21 to 2024-25). Note: The certificates should be obtained from the competent authority that is not below the rank of the Executive Engineer or equivalent rank officer, (The cost of completed works of previous years will be given a weightage of 10% per year based to bring them to 2025-26 level rupee price value).

Work Done Certificate

Capabilities of Vendor

List of key technical personnel required for the work is as under: 1) Site Engineer - Civil Engineer - BE Civil with Minimum 5 Years experience

Others -- Key Person

Each Tenderer should further demonstrate- Availability by owning at least 50% of the required / specified key and critical equipment for this work and the remaining 50% can be deployed on own / lease / hire basis for all works provided, the relevant documents (commitment agreements etc.) for availability for this work are furnished.1.Water Tanker 2Nos -1 Lease 2.Concrete mixer- 2 Nos-1 Lease

Others -- Machineries details with Rc copies/Agreement copies

Financial Status

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e, 2020-21, 2021-22, 2022-23, 2023-24 & 2024-25, achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.790.58 Lakhs (usually not less than the two times estimated annual payment under this contract during the last five financial years from 2020-21 to 2024-25). Note: Audited balance sheet certified by practicing Chartered Accountant shall be furnished. (Additional weight age at 10% for each year will be given for turnover to bring it to 2025-26 price level).

Audited CA Certificate of Annual Turnover

The intending bidder/ firm/ company shall furnish details of liquid assets and / or availability of credit facilities of not less than Rs.118.59 Lakhs(Credit lines/letter of credit/certificates from any Nationalized banks for meeting the fund requirement etc. i(usually the equivalent of the estimated cash flow for three months in the peak construction period)

Line of Credit

Tender Capacity calculation in prescribed format

Others -- ongoing and existing commitment details as per prescribed format

Work Locations

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹5.9 L

Important Dates

Last Activity

27 Dec 2025

Published

11 Dec 2025

Bid Opening

29 Dec 2025

Download Ends

17 Dec 2025

Pre-Bid Meeting

15 Dec 2025

BOQ Preview

•

Providing Civil Works to Fountain Channels and Pathway tiles, upgradation of Water fountains with lights, Moving heads and Dynamic nozzles at S3 Tarrace in South Brindavan Garden.

•

Dismantling tile work in floors and roofs laid in cement mortar include ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles 10 mm25 mm

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

•

Providing and fixing antiskid, thermo resistant, outdoor, vitrified Tiles of Approved make quality and color of size , 600mm x 1200mm and 16mm thick fixed on bed of 20mmthick cement mortar of 1:3 with...

•

DOLPHINE JET FOUNTAIN, H3M .Size DN25mm This Nozzles are Single Jet straight Nozzles made of Brass C360/C464

•

MULTI JET NOZZLE, DN 40mm.H-3MH-4-5M Made of SS 304 or Brass C360/C464 is a nozzle which has multi water coloumns and the water jet operates at different diameter outside in different levels.

•

MULTI VARIENT MUSHROOM H-2-3M .MOC is SS304 and the Nozzle performance feature of water column of multivarient sizes and width of spray gives a pattern for the water columnform a Mushroom shape.

•

THE OUTSIDE ARCH H=2M This Straight Jet nozzles are madeof Brass C360/C464 and is fitted to a circular SSPipe of 75mm to 100 dia .This circular arrangment when water comes out of this jets must form a...

•

MULTI VARIENT FOUNTAIN, H=4-5M Made of SS 304 or Brass C360/C464 is a nozzle which has multi water coloumns and the water jet operates at different water levels forming a pyramid or different stages o...

•

CASCADE H=1M . Size DN40mm Is made of Brass C306/C464 garde. The Nozzle is casted in Brass alloy , and fits into the Manifold and placed under water slightly submerged. When operates , it gives a larg...

•

FAN JET WATER FILM NOZZLE CENTRING FOUNTAIN H=6M

•

SS Pipe of DN80 ( THE SOUTH & NORTH PART) All Pipes are stainless steel must be of seamless quality as per ASTM A312/A304/304L/ASME SA 312 . Schedule 5S-10S . Pipe thinkness min 2-3 mm . The pipes are...

•

Materials of construction for all submersible pumps of Cost Iron, where in the impellers, diffusers and inbuilt check-in valves must be of thermoplastic. Multi stage pumps may be used where ever neces...

•

Variable frequency with V/F & Sensor less vector control. Voltage 360-480 V AC, 3 phase. Input Frequency 47-63 Hz Output Frequency 0-240 Hz , Temperature 0-50 degree , Acceleration time )-600 sec Effi...

•

All submersible cables, must be made out of outer sheath of special grade of abrasion resistant water proof, PVC/Rubber compound or produced keeping vagaries of field conditions and voltage fluctuatio...

•

Control Valve / Solenoid Valves-DN40

•

Control Valve / Solenoid Valves-DN25

•

All LED underwater lights must be made up of either Aluminium die cast alloy with SS 304 front cover and 4mm tempered glass cover durable to withstand any under water application. OR the whole body mu...

•

Interprocess communication (IPC) is a set of programming interface that allow a programmer to coordinate activities among different program process that can run concurrently in an operating system. ...

•

A controller card is a hardware component that works as an interface between the motherboard and other computer components. It is a built-in component found in most computers. A controller card is ins...

•

MORE COMPLEX TASKS REQUIRE THE PROCESSING OF ANALOG PROCESS SIGNALS. ANALOG ACTUATORS AND SENSORS CAN BE CONNECTED TO A ANALOG MODULES WITHOUT ADDITIONAL AMPLIFIERS. THE EXTENSIVE RANGE OF MODULES ALL...

•

PCI-1243U is a 4-axis stepping motor control card with universal PCI interface. Each axis can be controlled directly through the card's I/O registers. This board is economic solution for stepping moto...

•

DMX512 (Digital Multiplex) is a standard for digital communication networks that are commonly used to control stage lighting and effects. It was originally intended as a standardized method for contro...

•

Fountian programme is wiriting of software and loading up in the hardware meant for the same. It involves in selection of songs, with royality , and programmeing the movement of the different Nozzles ...

•

OUNTAIN SOFTWARE FOR FOUNTAIN NOZZLES AS PER DESIGN AND CONCEPT

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath

•

Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip

•

thickness and resistivity as per IS-3975- 35 Sq...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

4130 S3 TERACCE JV.docx

Tender Document • 5.06 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

Ms S NARAYANA REDDY

₹4.3 Craccepted-aoc