ARMO of Electrical and Mechanical Installations at Tezpur Airport (2022-24)

Amount

Operation & Maintenance of E&M installations at 11KV Substation as per the Inventory & Scope of Work by deploying man power in 3-shifts (each of 8 hrs.) and at Terminal Building, Apron, Taxiway, AAI Colony, CISF Units in 1-shift as detailed in General & Special Condition of Contract involving minor repairs, attending complaints / faults / breakdown and taking rectification action, ensuring serviceability / satisfactory working of the systems, preventive maintenance, maintaining of records / documentation etc. on all days including National Holidays and Sundays as required.

a) For First Year

b) For Second Year

SH-II: DSR ELECTRICAL - 2022

Carrying out work as per CPWD DSR 2022 Electrical as and when required. (the bidder shall quote the rate in INR only for the job corresponding to Rs. 1,00,000/- & percentage (%) above/ below shall be calculated by AAI and paid accordingly) Note:-The rate shall be quoted for this item at SL.No-2 as per example given below- Example: i.) If bidder wants to quote the rate at per with rate of CPWD-DSR 2022(E&M),then bidder has to quote 100000 in the rate colomn. Subsequently, the total amount will be Rs.100000/- against item at SL.No-2 ii.) If bidder wants to quote the rate 5% above on rate of CPWD-DSR 2022 (E&M),then bidder has to quote 105000 in the rate column. Subsequently, the total amount will be Rs. 105000/-(Rs.100000+ Rs 5000) against item at SL.No- 2. iii. If bidder wants to quote the rate 5% below on rate of CPWD-DSR 2022(E&M),then bidder has to quote 95000/- in the rate column. Subsequently, the total amount will be Rs. 95000/-(Rs.100000 - Rs.5000) against item No.2 The above example is only for guidance to bidder for item at SL.No-2 only.

a) For First & second Year

SH-III: Painting of Panels, Poles and Rewinding of fans etc.,

Painting of Indoor type Power Transformer of 500 KVA located in power house,with one or more coats of spray painting with synthatic Enamel paint of Approved brand and manufacturer to give an even shade, including cleaning of surface with detergent etc., of required color to give an even shade and writing lettering as per the direction of EIC complete as required.

a) For First Year

b) For Second Year

Painting of Outdoor type Power Transformer of 63 KVA located in power house,with one or more coats of spray painting with synthatic Enamel paint of Approved brand and manufacturer to give an even shade, including cleaning of surface with detergent etc., of required color to give an even shade and writing lettering as per the direction of EIC complete as required.

a) For First Year

b) For Second Year

Painting of Electrical LT indoor, Outdoor panels, pumps panel , earth pit covers etc located in power house, colony Terminal building, switch rooms,etc., with one or more coats of spray painting with synthatic Enamel paint of Approved brand and manufacturer to give an even shade, including cleaning of surface with detergent etc., of required color to give an even shade and writing lettering as per the direction of EIC complete as required.

a) For First Year

b) For Second Year

Painting of Street Light poles of upto 7.5- 8.0 mtr height i/c arms and approx with one or more coats of spray painting with synthatic Enamel paint of Approved brand and manufacturer to give an even shade, including cleaning of surface with detergent etc , of required color to give an even shade and writing lettering as per the direction of EIC complete as required.

a) For First Year

b) For Second Year

Labour charges on lifting of submersible pump pump motor set of the existing sizes of 10 HP ( Bore well pump set ) from the existing bore of upto 250 feet deep as & when required along with pipe lines, cable, wire rope etc. and reinstallation of the same after rectification of the defect (Spare parts charges of repairing for rectification of pump/motor will be paid separately).

a) First Year

b) Second Year

Labour charges on lifting of monoblock pump motor set of the existing sizes of upto 7.5HP ( open well pump set ) from the existing positioning of monoblock pump as & when required including removing all nuts & bolts, electrical connection etc. and reinstallation of the same after rectification of the defect (Spare parts charges of repairing for rectification of pump/motor will be paid separately).

a) First Year

b) Second Year

Repairing/rewinding of 3-phase submersible pump of capacity of 10.0HP by replacement of defective bronze bushes,bearings, impeller, water seal, gasket, shaft, impeller etc. complete as required (As & when required) of following capacity (Old dismantle material will retain by agency).

a) First year

b) Second year

Repairing/rewinding of 3-phase monoblock pump set of capacity upto 5.0HP to 7.5 HP by replacement of defective bronze bushes,bearings, impeller, water seal, gasket, shaft, impeller etc. complete as required (As & when required) of following capacity (Old dismantle material will retain by agency).

a) First year

b) Second year

Repairing/rewinding of 1-phase Water lifting pump set of capacity upto 1.0 HP by replacement of defective bearings, impeller, water seal, gasket, shaft, capaitors etc. complete as required and including transportation etc. (As & when required) of following capacity (Old dismantle material will retain by agency).

a) First year

b) Second year

Rewinding of the following ceiling/ exhaust/ wall mounted/ pedestal fan motors including dismantling, transportation to workshop & bring back to the site and reinstallation, testing & commissioning as required (Dismantled material shall be the property of tenderer). a) Light weight Ceiling fan/ Exhaust fan upto 300mm/ Wall bracket fan upto 300mm/ Pedestal fan upto 300mm

a) First year

b) Second year

Rewinding of the following ceiling/ exhaust/ wall mounted/ pedestal fan motors including dismantling, transportation to workshop & bring back to the site and reinstallation, testing & commissioning as required (Dismantled material shall be the property of tenderer). a) Medium weight ceiling fan/ More than 300mm but less than 450mm Exhaust fan/ More than 300mm but less than 450mm wall mounted fan/ More than 300mm but less than 450mm pedestal fan

a) First year

b) Second year

Rewinding of the following ceiling/ exhaust/ wall mounted/ pedestal fan motors including dismantling, transportation to workshop & bring back to the site and reinstallation, testing & commissioning as required (Dismantled material shall be the property of tenderer). a) Heavy weight ceiling fan/ More than 450mm but less than 600mm Exhaust fan/ More than 450mm but less than 600mm wall mounted fan/ More than 450mm but less than 600mm pedestal fan

a) First year

b) Second year

Repair and maintenance of Hand drier i/c replacement of necessary spares by required new spares, dismantling, transportation to workshop & bring back to the site and reinstallation, testing & commissioning as required (Dismantled material shall be the property of tenderer).

a) First year

b) Second year

SH-IV: Transformer oil filtration ,Relay callibration etc.,

Supply of Insulating Transformer Oil confirming to IS 335:1993 with latest amendments

a) For First year

b) For Second year

Dehydration/filtration of transformer oil by heat treatment method till attains the specified BDV as per IS including conducting BDV test before and after filtration complete as required i/c submission of test report.(500KVA Transformer=02.

a) For First year

b) For Second year

Supplying of silica gel ( tel tel type ) for transformer breather.

a) For First year

b) For Second year

Servicing, Overhauling and cleaning of following 11KV 400 Amps HT OCB, 11KV PT including filtration and dehydration of oil up to required dielectric strength etc as required. Make -Alstom a)OCB's-04 b)P.T. 11KV/110V - 02 Nos.

a) For First year

b) For Second year

Servicing and cleaning of LT Air circuit breaker (ACB) of 1.1 KV grade and upto 800 Amps. Rating by OEM or their authorized service representative including submission of test reports as per the standard practice of OEM and direction of Engineer -in- Charge complete as per actual site requirements. Make- L & T

a) For First year

b) For Second year

Servicing, Testing and Calibration of over load and earth fault relay, type CDG make Alstom through secondary injection kit including testing of CT / PT etc as per OEM's standard and as per special conditions of contract complete as required. (1set =2no.O/L, 1 no-E/F, 1- auxiliary relay ) i/c submission of test report..

a) For First year

b) For Second year

Servicing, Testing and Calibration of 500 KVA transformer protection alarm and trip relays of out going transformers etc as per OEM's standard and as per special conditions of contract complete as required i/c submission of test report.

a) For First year

b) For Second year

Decorative city side area of Tezpur Airport with minimum 200 sets LED Rice lights (Each riser of approx.12 mtrs length) giving tri colour effects or as per theme decided by EI-C during national holidays or festivals etc. as required. (The rate shall be quoted for hiring charges of the assorted decorative lights on three days basis including installation and dismantlling).Note:Please refer front area( Height of building-12 mtrs x 56 mtrs in width) image/photo of city side area of Tezpur Airport is attached).

a) For First year

b) For Second year

M K ENTERPRISES

ABHISHEK INTEGRATIONS LIMITED

sudarshnacoolingcentre andelectricals

RD INFRATECH ENGINEERS PRIVATE LIMITED