HWPM/EU/LTG/AMC/2024-26/NIT , Dt.24/07/24

Amount

Trouble shooting & rectification including cleaning and replacement of defective components, if required for the following items as per Technical Specifications.

18 to 36W LED / Fluorescent Lamps & Tubelights

40 to 100W Incandescent lamps

up to 160W Flameproof LED fittings

40 to 500W all type of lamps (LED/HPMV/HPSV/Flouroscent etc) - roof/wall mounted and street light fittings

1000W Search lamps

All types MCBs / ELCBs / Plug top, switch and Socket up to 63 A /Fuse bases

Isolators up to 250A

Maintenance of Electrical DBs/ FPs/ JBs/ Panels as per Technical Specifications .

Distribution boards/Panels

Feeder Pillars

Street light JBs

Field Junction boxes / Welding sockets

Point wiring up to 25mtr with single core wire in PVC/GI conduit/casing capping or by laying the cable as per technical specifications.

Trouble shooting & rectification of Ceiling fans/ Exhaust fans/Pedastal fans/ Wall mounted fans / Power points or Power supply checking including cleaning and replacement of defective components, (if required) as per Technical Specifications .

Supplying and fixing suitable size PVC/wooden switch board with 3 no.s 3 dual pin 5/6A sockets outlets and 3 no.s 5/6A Piano type switches as per Technical Specifications .

Supplying and fixing suitable size PVC/wooden switch board with 5 no.s 3 dual pin 16A socket outlets and 5 no.s 5/16A piano type switches with 1 no. MCB, connections etc as required as per Technical Specifications .

Repair of damaged covers/doors made of GI sheet including supply & fabrication by cutting & welding to required size and fixing with suitable Screws, Hinges, gaskets and painting as per Technical Specifications .

Repair of Lighting JBs: Cleaning, Painting of JBs & Replacement of Connectors, 6A MCBs as per Technical Specifications .

New Installation or Replacement of Light fixture of various types of Light fittings with suitable brackets including wiring upto 25mtr & its termination with Lugging & Glanding, Fixing with Suitable MS channels with proper Welding if required as per Technical Specifications .

Installation of Tubular street light poles including fixing of new junction box as per Technical Specifications .

Excavation of cable trenches in all kinds of soils, depth upto 1.2m including dressing of sides lift upto 1.5m, including getting out the excavated soil, refilling with sand and or good soil after laying cable/pipe etc in layers, ramming, watering and disposal of surplus excavated soil as directed.

Removal of Cable from over head cable trays / ready trenches or on the wall as per Technical Specifications .

Up to 35 sq. mm (clamped with 1mm thick saddle)

above 35 sq. mm up to 95 sq.mm (clamped with 25/40x3 mm MS flat clamp)

above 95 sq. mm up to 185 sq.mm (clamped with 40x3 mm MS flat clamp)

above 185 sq. mm up to 400 sq.mm (clamped with 40x3 mm MS flat clamp)

Cable laying on over head cable trays / ready trenches / hume pipes or on the wall including shifting of material from stores/location to job location as per the Technical Specifications .

Up to 35 sq. mm (clamped with 1mm thick saddle)

above 35 sq. mm up to 95 sq.mm (clamped with 25/40x3 mm MS flat clamp)

above 95 sq. mm up to 185 sq.mm (clamped with 40x3 mm MS flat clamp)

above 185 sq. mm up to 400 sq.mm (clamped with 40x3 mm MS flat clamp)

Cable termination up to 3CX50 Sq.mm as per Technical Specifications .

Fixing or Removing of GI earth strip size 25 mm x 3mm or 50mm x 6mm and connecting to the grid in lighting System as per the Technical Specifications .

Cleaning & painting of street light poles with JBs above 7.5m height as per the Technical Specifications .

Providing / Removing 1-phase or 3-Phase Temporary power supply arrangement for Lighting, Cutting/Grinding/Welding Machines, Hydro Jet Machines, Cross ventillation etc. with wiring upto 50 mts as per the Technical Specifications .

Installation including supply of the New Junction Boxes in place of existing corroded/ damaged JBs at various locationsas per the Technical Specifications .

Shifting of useful / scrap material to required location, coiling/uncoiling of cables on to/from drums, segregation of material / cleaning of fixtures, assemblies etc. or any other work as per the Technical Specifications .

Supply & Installation of MS Swage Type Lighting Pole with Junction Box and M/s philips make 90W LED Street Light Luminaire and Complete Installation of Street Light Pole as per the Technical Specifications .

M/s K S EVEREST ENGINEERING WORKS