PROVN OF CERTAIN MINOR WORKS AND REVENUE WORKS AT BARAMULLA UNDER GE 969 EWS

Excavation in trenches in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil, Complete all as specified and as directed.

Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm, Complete all as specified and as directed.

Removing of excavated soil not exceeding 50m and depositing where directed at a level not exc 1.5 M above the starting point, Complete all as specified and as directed.

M&L for cement concrete type C-2 1:3:6 (using 40mm graded aggregate) as in foundations, filling and mass concrete, Complete all as specified and as directed.

M & L pre-cast cement concrete block masonry Type C-1, 1:3:6 (20mm graded aggregate) with solid blocks, exc 10cm in width and seting in cement mortar (1:6), Complete all as specified and as directed.

M & L precast cement concrete trpe C-1 1:3:6 (using 20mm graded aggreagate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar (1:4) , complete, in walls, Complete all as specified and as directed.

M & L Rendering 15 mm thick in cement and sand mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing with using integral waterproofing compound @ 3% by weight of cement including finishing the surface even and smooth without using extra cement complete all as specified. (Note - W P C shall be measured and paid separately).

M & L Rendering 10 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement, Complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint, Complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper, Complete all as specified and as directed.

M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, Complete all as specified and as directed.

M&L 75 mm thick Cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring, Complete all as specified and as directed.

M & L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and smooth, Complete all as specified and as directed.

M & L Machine cut kota stone slab flooring 20-25mm thick over and including 15mm thick cement screed base in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to get mirror finishes, Complete all as specified and as directed.

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement and sand mortar 1:4, Complete all as specified and as directed.

M & L Glazed ceramic tile 450 x 300 x 8 mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick plaster in cement and sand mortar (1:4), Complete all as specified and as directed.

M&L for 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design& pattern as in footpath, parks, ;awn, drive ways or light traffice parking etc., of required strengthe, thickness & size / shape made by table vibratory method using PU mould, laid in required olour & pattern over and including 50mm thick compacted bed of coarse sand , compacting and proper embedding laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine and and cutting pf paver block as per required sixe and pattern , finishing and sweeping extra sand, Complete all as specified and as directed.

S & Frolled mild steel in roof trusses (Framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to grade Fe-410W -(Gde E-250 Quality A), Complete all as specified and as directed.

S&F steel wotk in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240, Complete all as specified and as directed.

M & L 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement , Complete all as specified and as directed.

S& F Welded steel wire mesh febric fixed complete to steel members. Weight per sqm n.exc 4..00 Kg all as specified and as directed

M & L Preparation of new steel surfaces of any description over 10 cm width or girth and priming with red oxide zinc chrome and painting with two coats of synthetic enamel paint complete all as directed.

M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as etc, Complete all as specified and as directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws, Complete all as specified and as directed.

M&L pre-cast cement concrete Type B-1, 1:2;4, (20 mm graded aggregate) in lintels upto 1.5m clear span, cills, copings, steps, seismic and other similar bands etc, Complete all as specified and as directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in any type of hard/dense soil, Complete all as specified and as directed.

S & F Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors including screed bed 15mm thick comple in CM 1:4, Complete all as specified and as directed.

M & L cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, Complete all as specified and as directed.

Excavaton in post holes (or similar holes) each n.exc 0.5 cm, getting out, returning filling in and ramming earth or broken rubble mixd with earth aound in layers n.exc 25cm in hard/dense soil, Complete all as specified and as directed.

S&F mild steel framed work such as grills (Ventilators for secuerity post) & frame work of water taks or posts of FE 290 Gde E-165, Complete all as specified and as directed.

S&F Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded , Complete all as specified and as directed.

Use & waste of formwork to rough finished surfaces of concrete, form work to sides of plinth beam, footings, bases of columns etc, Complete all as specified and as directed.

M&L for RCC Nominal mix type B1 1:2:4 using 20mm graded aggregate as in fdn, footing, plinth beam, bases for columns etc, Complete all as specified and as directed.

Use & waste of formwork to square or rectangle shape and fair finished surfaces of concrete, to sides of pillars, post , struts etc, Complete all as specified and as directed.

M&L for RCC Nominal mix type B1 1:2:4 using 20mm graded aggregate as in columns etc, Complete all as specified and as directed.

Use & waste of Formwork finished fair to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc , Complete all as specified and as directed.

M &L for RCC Nominal mix type B1 1:2:4(20mm grade aggregate in beam bressummers, lintels over 1.5m span etc, Complete all as specified and as directed.

Formwork to soffits of fair finished suspended slabs such as roof slabs, floor slabs, landings and similar work; n.exc 200mm thick (Horizontal or sloping) etc, Complete all as specified and as directed.

M&L for reinforced cement concrete type B1 1:2:4 ( 20mm graded stone aggregate as in slabs supported on walls, beams and columns and the complete all as specified and directed.

S & F Mild steel TMT bars 10 mm dia and over, quality conforming to Grade 415 MPA cut to length , bent to shape required incl cranking, bending and binding with mild steel wire (annealed) not less than 0.9mm dia, Complete all as specified and as directed.

All as per item No 40 above but 5mm dia and above including 10mm dia in stirrups, Complete all as specified and as directed.

S&F second class softwood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 13 Sqcm and n.exc 25 Sqcm, Complete all as specified and as directed.

S&F second class softwood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 3 Sqcm and n.exc 6 Sqcm, Complete all as specified and as directed.

M&L for 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work in ceiling etc, Complete all as specified and as directed.

Supply only integral water proofing compound, Complete all as specified and as directed.

Please Enable Macros to View BoQ information