For Installation of 100 KVA Transformer and related electrical work in deposit scheme in the area of EUDD (Thakurganj) Lucknow.

Amount

Safe loading at ESC Daliganj, carriage upto JE dump store/site of work, its unloading and proper stacking of following materials

a) STP 11 Mtr Long

b) 11 Kv 3x70 mm² XLPE Cable

c) LT PVC Cable 3.5x70Sqmm

d) 11 KV Pin Insolater with pin

e) 11 KV CJ kit O/D,

f) 100 KVA T/F

Laying of 11 Kv 3x70 mm² XLPE Cable laid by digging of trench of size 900 mm deep 500 mm wide after spreading of local sand 3" on the surface of trench in between two nos consecutive rows of first class bricks and covered with brick filling of sand in hollow space and filling of trench with mud and its proper ramming in double circit ( All the materials except cable will be arranged by the contractor)

Fabrication, erection, grouting, plinthing of Sub Station type double pole structure on 11 Mtr STP pole providing top of channel MS 100x50x2240mm, MS dropper channel 100x50x2000 mm concerting of support, number plate, danger board with clamp, Al type, stone pad 300x300 x 75 mm, clamp with nuts and bolts (Only STP Will be arranged by the department)

Hosting of 11 KV 3x70 mm², XLPE cable with pole, proper clamping and jumphering. The cable will be passed through MS pipe of size 150 mm dia3 Mtr long( All the materials and T&P arranged by the contractor)

High pressure testing of 11 KV 3x70 mm² XLPE cable with DC voltage at 18 KV with hold up to 5 minutes ( All the material will be provided by contractor)

Boring type earthing of 11/0.4 Kv 100KVA Substation by boring and lowering of 20 M deep or up to water lavel 1.5" dia B Class jindal make GI pipe its connection in between T/F Body and Neutral with GI strip of size 50x6 mm ( All the materials will be arranged by the Contractor)

Construction of Masonry type Transformer plinth of size 2x2x1.5 M with brick, cement coarse sand, sand &brick ballast, filling of sand in the hollow space, plastering outer surface in ratio 1:4:6 top of the plinth 4" thickness grouting of 2 no MS channel of size 100x50x2000mm on the top of the plinth for placement of T/F. ( All the materials will be arranged by the contractor)

Construction of retaining wall, fabrication erection of wire mesh fencing of size 5+3 & 2.0 M height around T/F and distribution pillar Box with retaining wall & 1 no gate with locking arrangement made of MS angles iron of size 50x50x6 mm jointed with nuts and bolts. The panel must be supported with MS Flat of size 50x6mm. Wire Mesh of size10 SWG rectangle type its painting as per norms of RESSPO. ( All the materials will be arranged by the contractor )

Installing, commissioning of 100 Kva Transformer including its connection in between 11 Kv line and LT line mounting of copper L-Piece 300x65x6 mm providing Al crimping lugs of size 250 mm²( All the materials except T/f will be arranged by the contractor)

Fabrication, erection and grouting of cable stand with MS angle of size 65x65x6 mm upto the height of 3 M from the ground level with two no support MS angle of same size (All the material will be arranged by the contractor)

Laying of LT PVC cable size 3.5x70 Sqmm laid by digging of trench of size 900 mm deep 500 mm wide after spreading of local sand 3" on the surface of trench in between two no consecutive rows of first class bricks and covered with bricks filling of sand in hollow space in double circuit ( All the materials will be arranged by the contractor)

Painting of all structure ( Double pole and wirmesh fencing )

Taping of 11 KV and LT line

M/S R P ENTERPRISES

Sidhi Enterprises