REPAIRS AND RECANNING OF CHAIRS AND OTHER STEEL FURNITURE INCL PAINTING TO OTM AND MD ACCN OF O/L, L/L AND HL BARODA

Amount

Almirah Large Steel (FD-67(M), FD-1031, FD-1033 M & L for Dismantling / Removing the following existing UNSV parts / components as specified and S&F new components, using 1mm thick MS Sheet duly painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Shelves

Locking device three way made out of 10mm MS bar round and 3mm MS plate.

Handle with bush

Cleats made out of 2mm thick sheet bent to shape

Two coat of synthetic enamal paint OG/Smoke Gray to internal / external surface & shelves completely through spray gun machine after preparation of old painted surface by filling with putty, cleaning with sand paper and applying primer where required to Almirah Large Steel.

Almirah Med Steel FD-1032 : M & L for Dismantling / Removing the following existing UNSV parts / components as specified and S&F new components, using 1mm thick MS Sheet duly painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Shelves

Locking device three way made out of 10mm MS bar round and 3mm MS plate.

Handle with bush

Two coat of synthetic enamal paint OG/Smoke Gray to internal / external surface & shelves completely through spray gun machine after preparation of old painted surface by filling with putty, cleaning with sand paper and applying primer where required to Almirah Med Steel

Book Case Steel (FD-1028): M & L for Dismantling / Removing the following existing UNSV parts / components as specified and S&F new components, using 1mm thick MS Sheet duly painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Shelves

Chromium Plated steel handle 100 mm l

Locks

Glass shutter

Glass panel 3mm thick

Two coat of synthetic enamal paint OG/Smoke Gray / same colour to internal / external surface & shelves completely through spray gun machine after preparation of old painted surface by filling with putty, cleaning with sand paper and applying primer where required to Book Case Steel.

Bed Hard steel with Ply Wood Top (FD/ E6/MAP/8®) M & L for Dismantling / Removing the following existing UNSV parts / components of Bed Hard Steel with Ply wood Top as specified and S&F new components of duly painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Headrest

Footrest

Long Rails

Stiifner

Ply wood of size 1980 x 900 mm x 12 mm thick of BWR grade all as specified in drg and directed.

One coat of synthetic enamal paint black after preparation of old painted surfaces by cleaning with sand paper and applying primer where ever required all as specified & directed.

Chair CB Steel With Arms & Cushion {CWE(B)/FD/0504} M & L for Dismantling / Removing the following existing UNSV parts / components of Chair CB Steel with Arms & Cushion as specified and S&F new components of duly painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

One coat of synthetic enamal paint OG/Smoke Gray/Black after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified & directed.

Chair CBA Spl with Hand Board (FD-260 & FD/E6/MAP/05) M & L for Dismantling / Removing the following existing UNSV parts / components of Chair CBA Spl with Hand Board as specified and S&F new components of duly painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

One piece Seat and back PVC

Hand board made out of 18mm thick prelaminated particle board teak face with hot pressed PVC beading all around

One coat of synthetic enamal paint black after preparation of old painted surfaces and necessary welding work if required, filling with putty, cleaning with sand paper and applying primer where ever required and all as specified and directed.

Chair CBA Steel with Arms (FD-75(M)) : M & L for Dismantling / Removing the following existing UNSV parts / components of Chair CBA Steel with Arms as specified and S&F new components of duly painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Flat iron 25 x 3mm of required length welded with seat of chair CBA steel with arms complete.

Factory made Seat made out of 2nd class hard wood teak (Well seasoned) duly black stove polished includng cane work 2mm plastic cane half rounded and 3.5/4mm for perimeter work godrej pattren.

Factory made Back rest made out of 2nd class hard wood teak (Well seasoned) duly black stove polished includng cane work 2mm plastic cane half rounded and 3.5/4mm for perimeter work godrej pattren.

Arm rest made out of 1st class hard wood teak (Well seasoned) duly black stove polished.

One coat of synthetic enamal paint OG/Smoke Grey after preparation of old painted surfaces and necessary welding work if required, filling with putty, cleaning with sand paper and applying primer where ever required and all as specified and directed.

Chair CB Steel Without Arms {FD-75 (M)}: M & L for Dismantling / Removing the following existing UNSV parts / components of Chair CB Steel without Arms as specified and S&F new components of duly painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Flat iron 25 x 3mm of required length welded with seat of chair CB steel without arms complete.

Factory made Seat made out of 2nd class hard wood teak (Well seasoned) duly black stove polished includng cane work 2mm plastic cane half rounded and 3.5/4mm for perimeter work godrej pattren.

Factory made Back rest made out of 2nd class hard wood teak (Well seasoned) duly black stove polished includng cane work 2mm plastic cane half rounded and 3.5/4mm for perimeter work godrej pattren.

One coat of synthetic enamal paint OG/Smoke Grey after preparation of old painted surfaces and necessary welding work if required, filling with putty, cleaning with sand paper and applying primer where ever required and all as specified and directed.

Chair Computer (FD/E6/MAP/01) : M & L for Dismantling / Removing the following existing UNSV parts / components of Chair Computer as specified and S&F new components of duly painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Side arms (PU Material) fixed to chair Computer.

Factory made Cushion seat made of 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round.

Factory made Cushion Back made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all around.

Base assembly to chair computer.

Hydraulic assembly to chair Computer.

Caster wheel.

Chair Varandah MAP (FD/E6/MAP/11) M & L for Dismantling / Removing the following existing UNSV parts / components of Chair Verandah MAP as specified and S&F new components of duly painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

M&L for removing of old/broken flat iron from existing Chair Verandah steel and S&F new flat iron 38 x 3 mm of required length welded with seat/Back of chair verandah Steel complete all as specified in drg and directed.

One coat of synthetic enamal paint Black after preparation of old painted surfaces and necessary welding work if required, filling with putty, cleaning with sand paper and applying primer where ever required and all as specified and directed.

Chair Verandah FD 256 : M & L for Dismantling / Removing the following existing UNSV parts / components of Chair Verandah as specified and S&F new components of duly painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Leg frame of size 20mm dia 16 gauge of MS conduit pipe fixed with run welding & duly painted and hard rubber shoe.

Plastic cane weaving 2mm wide border 3.5/4mm wide round side border cane of approval qty after applying one coat of synthetic enamel white paint complete. make of cane: Ajay / MPI / Shah / Garware

Hard rubber shoe.

Chair Writing (FD/E6/MAP/12) : M & L for Dismantling / Removing the following existing UNSV parts / components of Chair Writing as specified and S&F new components of duly painted to match with existing with size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Side Arms (PU Material) fixed to chair writing.

Factory made Cushion seat made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round.

Factory made Cushion Back with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all around.

Charpoy GI Pipe ply top (FD-220) : M & L for Dismantling / Removing the following existing UNSV parts / components of Charpoy GI Pipe Ply Top as specified and S&F new components of same size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Tightening / refitting of frame by removing plywood top from charpoy GI with all fittings complete.

Plytop of 12mm fit to size including 6mm dia 65mm long bolt round headed, with nut and washer maximum 10 Nos per charpoy.

Stiffener of size 25mm square pipe of 1.6mm thick welded at equal distance of GI charpoy frame and applying two coats of synthetic enamel black paint over a coat of red oxide primer to conduit pipe.

GI elbow (32mm dia) ISI marked three way medium grade.

GI checknut 32mm dia medium grade.

32mm dia medium grade GI long rail including cutting, threading for GI Charpoy (Note: Long Rails are screwed fully in the angle elbow)

Short rails for GI Charpoys 32mm dia made out of from broken long rails obtained from srl item No. 13.06 above including cutting & threading rails and fixing. (Note: Short Rails are screwed fully in the angle elbow)

Legs for GI Charpoys 32mm dia made out from broken short rails obtained from Srl item No. 13.07 above including cutting, threading and fixing.(Note: Legs are screwed fully in the angle elbow)

Charpoy IP Folding ply top {FD-388 (R) } M & L for Dismantling / Removing the following existing UNSV parts / components of Charpoy IP Folding ply top as specified and S&F new components of same size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Plywood of 1980 x 900, 12mm thick of BWR grade into two peaces and fixed with 10 Nos of nut & Bolt.

One coat of synthetic enamal paint Black to all steel surface after preparation of old painted surfaces and necessary welding work if required, filling with putty, cleaning with sand paper and applying primer where ever required to Charpoy IP folding ply top all as specified in Drg & directed.

Desk Stand Lacture (FD-1022) M & L for Dismantling / Removing the following existing UNSV parts / components of Desk Stand Lacture as specified and S&F new components of same size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Wall pannel Left side/Right side of 18 mm thick Pre-lamited board all as specified & shown in drg.

Wall pannel Front side 18 mm thick Pre-lamited board all as specified & shown in drg.

Shelf of 18 mm thick Pre-lamited board all as specified & shown in drg.

One coat of synthetic enamal paint black to steel portion of Desk Stand Lacture after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified & directed.

Locker bed side steel (FD-1029) : M & L for Dismantling / Removing the following existing UNSV parts / components of Locker bed side steel as specified and S&F new components of same size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Socket for hanging CP rod 20mm dia

Hasp & staple of 75mm x 40mm x 3mm

Shutter duly painted.

Shelves duly painted.

Legs duly painted.

CP pipe 20mm dia CP steel conduit pipe of 1.6mm thickness as per required reach

One coat of synthetic enamal paint OG/Smoke Grey to all steel surface after preparation of old painted surfaces and necessary welding work if required, filling with putty, cleaning with sand paper and applying primer where ever required to Locker Bed Side Steel all as specified in Drg & directed.

Table 3' x 2' Steel without Drawer (FD-1007) : M & L for Dismantling / Removing the following existing UNSV parts / components of Table 3' x 2' Steel without Drawer as specified and S&F new components of same size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Top made out of Particle Board Prelaminated both side18mm thick exterior grade (ISI Marked) PVC beading fixed all around the top of same colour.

One coat of synthetic enamal paint OG/Smoke Grey to all steel surface after preparation of old painted surfaces by welding wk as reqd, filling with putty, cleaning with sand paper and applying primer where ever required to Table 3' x 2' Steel without Drawer all as specified in Drg & directed.

Table 3' x 2' Steel with Drawer (FD-1008) : M & L for Dismantling / Removing the following existing UNSV parts / components of Table 3' x 2' Steel with Drawer as specified and S&F new components of same size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Top made out of Particle Board Prelaminated both side 18mm thick exterior grade (ISI Marked) PVC beading fixed all around the top of same colour.

Drawer made out of 1mm thick MS Sheet bent to shape & cut to size.

One coat of synthetic enamal paint OG/Smoke Grey to all steel surface after preparation of old painted surfaces and necessary welding work if required, filling with putty, cleaning with sand paper and applying primer where ever required to Table 3' x 2' Steel with Drawer all as specified in Drg & directed.

Table 3' x 3' Steel (FD-1009) : M & L for Dismantling / Removing the following existing UNSV parts / components of Table 3' x 3' Steel as specified and S&F new components of same size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Top made out of Particle Board Prelaminated both side 18mm thick exterior grade (ISI Marked) PVC beading fixed all around the top of same colour.

One coat of synthetic enamal paint OG/Smoke Grey to all steel surface after preparation of old painted surfaces by welding wk as reqd, filling with putty, cleaning with sand paper and applying primer where ever required to Table 3' x 3' Steel all as specified in Drg & directed.

Table Bed Side MAP(FD-E6/MAP/15® : M & L for Dismantling / Removing the following existing UNSV parts / components of Table Bed Side MAP as specified and S&F new components of same size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Side of table with Particle Board Prelaminated both side 18mm thick exterior grade (ISI Marked) with hot pressed PVC beading.

Top of table made out of particle Board Prelaminated both side 18mm thick exterior grade (ISI Marked) with hot pressed PVC beading.

Upper drawer of Table made out of Particle Board Prelaminated both side 18mm thick exterior grade (ISI) Marked duly fixed with hot pressed PVC beading.

Lower Drawer of Table made out of Particle Board Prelaminated both side 18mm thick duly fixed with hot pressed PVC beadin.

Back side of Table made out of 12mm thick Ply Wood BWR Grade (ISI Marked).

MS Tube frame of Table made out of 18 x 18 mm, 18 Gauge MS Square Pipe duly painted.

Stainless Steel handle for Table Bed Side MAP.

Table Office Officer Steel (FD54(M) & FD-1003) : M & L for Dismantling / Removing the following existing UNSV parts / components of Table Office Officer Steel as specified and S&F new components of same size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Top made out of particle Board Prelaminated both side 18mm Thick (ISI Marked) with hot pressed PVC beading all around of same colour.

Drawers made out 1mm thick MS Sheet bend to shape & cut to size.

Shutter of side unit made out 1 mm thick MS Sheet bend to shape & cut to size.

Lock for existing table office officer steel.

One coat of synthetic enamal paint OG/Smoke Grey to all steel surface after preparation of old painted surfaces and necessary welding work if required, filling with putty, cleaning with sand paper and applying primer where ever required to Table Office Officer Steel all as specified in Drg & directed.

Table office Clerk Steel (FD-84(M) & FD-1004) : M & L for Dismantling / Removing the following existing UNSV parts / components of Table office Clerk Steelas specified and S&F new components of same size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Top made out of Particle Board Prelaminated 18mm thick (ISI Marked) with hot pressed PVC beading all around the top of same colour.

Drawers made out 1mm thick MS Sheet bend to shape & cut to shape duly painted.

Lock to Table

One coat of synthetic enamal paint OG/Smoke Grey to all steel surface after preparation of old painted surfaces and necessary welding work it required, filling with putty, cleaning with sand paper and applying primer where ever required to Table Office Clerk Steel all as specified in Drg & directed.

Table Dining ORs {FD-165(M)} M & L for Dismantling / Removing the following existing UNSV parts / components of Table Dining ORs as specified and S&F new components of same size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Top made out of Particle Board Prelaminated 18mm thick (ISI Marked) with hot pressed PVC beading all around the top of same colour.

One coat of synthetic enamal paint OG/Smoke Grey to all steel surface after preparation of old painted surfaces and necessary welding work if required, filling with putty, cleaning with sand paper and applying primer where ever required to Table Dining ORs all as specified in Drg & directed.

Teapoy Varandah (FD/E6/MAP/17 & FD-255, FD-383) : M & L for Dismantling / Removing the following existing UNSV parts / components of Teapoy Varandah as specified and S&F new components of same size & shape all as per drg and stacking of furniture inside the godown after repairs etc. complete as under:-

Top made out of Particle Board Prelaminated both side 18mm thick (ISI marked) with hot pressed PVC beading all around the top , of same color.

One coat of synthetic enamal paint Black / White to Teapoy Varandah after preparation of old painted surface after filling with putty, cleaning with sand paper and applying primer where required.

M&L for preparation of old Painted surface of steel furniture by removing dirt, spots, dots etc filling putty where required and painting with synthetic enamel paint as required shade of paint shall be as directed for the following items of furniture Note: All Painting work shall be done with spray machine.

Almirah Med Steel FD-1032

Almirah Large Steel (FD-67(M), FD-1031, FD-1033, FD/E6/MAP/18

Locker Bed Side Steel FD-1029

Table Office Officer Steel (FD54(M) & FD-1003)

Table office Clerk Steel (FD-84(M) & FD-1004)

Table Steel without drawer 900 x 600 x 760mm (FD-1007)

Table Steel with drawer 900 x 600 x 760mm (FD-1008)

Table Steel 900 x 900 x 760mm (FD-1009)

Teapoy Varandah (FD/E6/MAP/17 & FD-255, FD-383)

Rack Shoe Steel (FD/E6/MAP-II/02 ®)

Bed Hard Steel MAP (FD/E6/MAP/08 ®)

Stool Steel (FD-81(M)

Side Rack with 3/4 Tray Steel (FD-1023)

Book Case steel (FD-1028)

Vinayak Distributors

shreekalyanwoodworks