S R to Electrical, HVAC & P.A. System Work for Lecture Hall 1-2 & Conference Hall at Spine Campus, Asarwa, Ahmedabad

SR.No 2026- Item Description Qty Unit Rate Rate in Words

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 kV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of following

Rupees Five hundred

1 1-2-1. type, erected on PVC / Metallic/Wooden box, single mounting base frame 108 Pt. 534.00

Thirty Four Only

covered with textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed..(a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling completeCat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 kV Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator mounted and accessories

with earth continuity of following type erected on PVC / Metallic/Wooden box,

2 1-2-2. 52 Pt. 758.00 hundred Fifty Eight

single mounting base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic/Wooden box, single mounting base frame Rupees Three

covered with textured / metallic/white front plate modules erected on / in wall / hundred Six Only

ceiling with following type accessories Cat. III

Providing & erecting following type of Modular Type Accessories with

4 1-2-7. necessary connection. As desired by Engineer In charge(1) 6 Amp. SP one way 52 Ea 27.00

(2) 16 Amp. SP one way switch Rupees Fifty One

(3) 6/16Amp. Universal socket Rupees Eighty Two

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary PVC Rupees Twenty Four

fittings & Junction boxes fixed with adhesive solution & Clamps with following Only

dia of pipes, in approved manner as directed (a)20 mm

(b) 25 mm Rupees Thirty Three

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of

Rupees Seventeen

9 1-3-4. coupling, PVC bushes, Check-nuts etc. complete of following sizes.(1) 20 mm 10 Mtr. 17.00

(2) 25 mm Rupees Twenty One

Providing and erecting Mains with 1.1 kV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS Rupees Seventy

PVC insulated stranded wire of green colour for earth continuity of following Eight Only

size (A) With medium class Rigid PVC pipe and accessories (a) 2 wire 1.5 sq.

(b) 2 wire 2.5 sq. mm Rupees One hundred

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Rupees Five hundred

13 2-15-1. Luminaire efficacy> 85 lumens/watt ,LED 144 Ea. 530.00

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (v) 36-40 Watts, Surge-2

kV, IP-20, conventional 4 feet Cat-lll

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable

to operate on 240 V A.C. system and having breaking capacity 10 KA to be Rupees One hundred

erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III Twenty Two Only

Providing & erecting 240 V MCB double pole switch for motor & inductive load Rupees Three

15 3-10-2. (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing 5 Ea. 326.00 hundred Twenty Six

box having following capacity (A) 6 to 32 Amp. Cat.III Only

(B) 40 Amp. Cat.III Rupees Three

16 3 Ea. 359.00 hundred Fifty Nine

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

Rupees Eight hundred

17 3-10-5. Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box 3 Ea. 803.00

having following capacity (c)63 Amp. Cat.III

Sheets steel powder coated enclosure suitable for incorporating One/Two nos. Rupees One hundred

MCB. Seventy Five Only

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

19 3-11-5. 11 Ea. 352.00 hundred Fifty Two

appropriate nos. of MCBs.(The DBs should be used of same company of MCB

to be used) suitable for(A) single phase incoming and horizontal single phase

outgoing(a) single door (IP-30)(i)4 way

(B) three phase incoming and single phase horizontal type outgoing Per phase Rupees Three

isolation type (PPI)(b) sheet steel double door (IP-43)(iv)12 way Thousand Eight

hundred Thirty Six

Supplying & erecting approved make RCCB + MCB (Electro magnetic type

only) working on residual current device having 10 KA short circuit breaking

capacity and 30 mAmp. Sensitivity & 30 mili sec. tripping time conforming to Rupees Three

21 3-12-3 IS 12640 test knob facility trip free mechanism operating for rated leakage at 3 Ea. 3087.00 Thousand Eighty

nominal ten volt, complete erected including all materials lugs screws etc. Seven Only

completed.[f] 63A, 4 pole Three Phase

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 50 KA and above at 415 V having Normal Rupees Twenty Seven

current rating 400A. with variable Thermal & magnetic release suitable to work Thousand Four

on A.C.supply 50 Hz. With all internal connections, spreader tinned copper & hundred Seventy

complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Seven Only

Supplying and erecting triple pole & neutral 440V / 500V panel mounting

Copper Busbars with four equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly

23 3-8-2. wrapped with colour insulating tape for phase sequence of following current 3 Rn.Mtr 7247.00

hundred Forty Seven

carrying capacity, erected with necessary bus bar supports /insulators, main cable

socket to each bar, erected in existing cubical panel with necessary connections.

(D) Suitable for 400 Amp. capacity

Providing & erecting weather proof, dust & vermin proof, floor mounted front

operated indoor type cubical panel board necessary IP-42 and above protection

as per approval from engineer incharge made from 14 SWG thick CRC M.S.

sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal

partitions with necessary accesories , supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting with internal partitions & cable alley

as per requirements & instruction of engineer-in-charge with erection of supplied

switch gears, BUSBARS, suitable size of inter connecting PVC copper wire /

copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for Rupees Fourteen

measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Thousand Seven

24 3-16-1 Plates, sufficient nos. of hinged doors, handles with locking arrangement and 2.5 Sq.Mtr 14755.00

hundred Fifty Five

rubber gasket,heavy duty end terminal connection,danger notice board,necessary Only

ventilation,earthing strip complete. The Panel shall be painted with epoxy

powder coating. (The rates excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base beams) The panel shall be supplied

with following approved manufacturers with following size.(B) The standard

companies switch gear shall be used and only manufacturers at CPRI approved

factory (i) with 350mm depth

Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 kV. to be laid on wall with necessary Rupees Eight hundred

clamps or in existing trench / pipe of following size of cables (G) 3 1/2 core Sixty Eight Only

150 Sq. mm ( 70 Sq. mm 1/2 core)

Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 kV. to be laid on wall with necessary Rupees Two hundred

clamps or in existing trench / pipe of following size of cables (B) 4 core 25 Sq. Twenty Seven Only

Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 kV. to be laid on wall with necessary Rupees Eight hundred

clamps or in existing trench / pipe at road crossing or floor of following size Thirty Eight Only

of cables.(A) 4 core 10 Sq. mm

Supplying & erecting earth pit of minimum bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate including value of earth Rupees Four

resistance of installation duly stamped and signed by agency and officer Incharge Thousand Five

has to ensure the value of earthing resistane mentioned in test Certificate) & hundred Forty Six

having back filling compound of (B) Inner chemical (CCM Compound)- Only

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. (a) For Electrical

Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Providing and erecting HOT deep Galvanised iron strip/wire 4.064mm to Rupees Seventy

1.626mm. Seven Only

Providing , erecting , fabricating the M.S. structure as per requirement on site

incorporating proper size of M.S. angles,square,round, flats, bars, channels,

30 3-16-4-A sections complete with cutting, welding, grinding & finishing duly painted with 90 Kg. 77.00

one coat of red oxide with erection on site as per direction of engineer in charge

with necessary grouting, cementing, plastering & finishing complete.

Providing and fixing approved make Perforated C type cable tray. Made from

sheet steel. The cable tray should be single or double bended as per required and

as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS

31 .4-11-1 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI 50 Rmt. 302.00

hundred Two Only

hardware like nut - bolt and washers etc. erection with necessary support(

included) as per Specification and as per instruction of engineer in charge..(1)

50 X 50 X 1.6 mm Thick

(2) 100 X 50 X 1.6 mm Thick Rupees Three

32 350 Rmt. 357.00 hundred Fifty Seven

Providing and fixing approved make 'T' Junction for Perforated C type cable tray.

Made from sheet steel. The Junction should be bended as per IS 2062/1079 and

shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5%

Rupees One hundred

33 .4-11-2 perforation with coupler plate / Fish plate and GI hardware like nut - bolt and 5 Ea. 145.00

Forty Five Only

washers etc. erected on existing support as per Specification and as per

instruction of engineer in charge of following size(1) 50 X 50 X 1.6 mm Thick

(2) 100 X 50 X 1.6 mm Thick Rupees One hundred

Fifty Eight Only

Providing and fixing approved make '90° Elbow' for Perforated C type cable tray.

Made from sheet steel. The Junction should be bended as per IS 2062/1079 and

shall be coated with hot dip galvanizing as per IS 2629/4759. with coupler plate Rupees Ninety Eight

/ Fish plate and GI hardware like nut - bolt and washers etc. erected on existing Only

support as per Specification and as per instruction of engineer in charge..(1)

X 50 X 1.6 mm Thick 90° Elbow

(2)100 X 50 X 1.6 mm Thick 90° Elbow Rupees One hundred

Providing and erecting FRLS-XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 kV. to be laid on wall with necessary Rupees Two hundred

clamps or in existing trench / pipe at road crossing or floor of following size of Sixty Six Only

cable.(A) 3 core 2.5Sq. mm

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

38 3-11-5. appropriate nos. of MCBs.(The DBs should be used of same company of MCB 9 Ea. 1664.00

hundred Sixty Four

to be used) suitable for (B) three phase incoming and single phase horizontal

type outgoing Per phase isolation type (PPI) (a) single door (i)4 way

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Rupees Seven

39 3-10-5. Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box 27 Ea. 729.00 hundred Twenty Nine

having following capacity (b)40 Amp. Cat.III Only

Providing & erecting Approved make Ceiling Fan with double ball bearing ISI

mark with Condenser 230 volt A.C.50 Hz 1200 mm sweep complete having

40 5-1-3. blades aluminium body and blade sets having ornamental design shanks , canopy 52 Ea. 2289.00

hundred Eighty Nine

erected with earthing. [ Make shall be approved by Engineer in Charge]

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe

Rupees One hundred

41 5-2-1. down rod erected duly painted for fan complete with proper insulation without 52 Mtr. 107.00

leakage and earthing.

Shifting of Split A.C. The Scope includes dismantling, shifting, re-installing &

re-commissioning of the units including topping up of Refrigerant gas, minor

42 12-5-7. 10 Ea. 1950.00 Thousand Nine

civil work wiring existing piping M S Stand electrical cabling with PVC drown

hundred Fifty Only

piping for 1.00, 1.5 & 2.0 TR capacity.

Supplying & installing MS standard type stand mounting for outdoor unit of Rupees Seven

43 8-3-5. Split A.C. up to 4 TR capacity erected with necessary hardware materials as 10 Ea. 739.00 hundred Thirty Nine

Supplying and erecting insulated pair of soft copper tubing open or concealed Rupees One

including power and control cable,necessary PVC drain pipes for Split/Cassette Thousand One

AC machine up to 4 TR capacity hundred Forty Seven

Supplying colourless, odourless, non-flammable gas R-22(CHF2CL) Rupees Five hundred

Providing and erecting approved make ductable split Air Conditioning unit

each consist of remote located condensing unit and an evaporating unit

complete with interconnecting insulated refrigerant piping up to 10 RMT. rigid

PVC, drain piping of 10 kg / cm2 dully insulated with nitrile rubber insulation Rupees Two Lakh

of 10 RMT with ECO Friendly Green gas. The condensing unit is complete Twelve thousand

with hermetically sealed scroll compressor & condenser unit which Eight hundred

effectively achieves heat rejection by utilizing air of fan and coil type Fourteen Only

condenser. The evaporating unit will be complete with DX evaporator

centrifugal blower, blower motor along with microprocessor biased remote

controller with memory backup etc. (B) For 8.5 Ton

Supply, Installation, testing and commissioning including vaccumiazation and

Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant

piping for VRV/VRF system, complete with fittings, with suitable adjustable

ring type hanger supports, jointing/brazing including accessories, insulated with Rupees One

47 8-6-5. XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile 175 Mtr. 1430.00 Thousand Four

rubber tubular sleeves sections of specified thickness as given below for Suction hundred Thirty Only

and Liquid lines, all accessories as per specifications etc with necessary

refrigerant joint as required : (H) 28.58 mm dia (OD) (Hard drawn) with tube

thickness 1.2 mm with 19 mm thick insulation

(E) 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick

Rupees Nine hundred

48 insulation 175 Mtr. 931.00

Thirty One Only

Central Control System(A) Cord type remote control with thermostat, LED Rupees One

Display and internal wiring for Cassette, FCU & CSU Thousand Eight

hundred Thirty Six

Supplying colourless non inflammable refrigerant Gas R-410 Rupees Nine hundred

Supplying & fixing 50mm thick TF quality expanded polystyrene for underdeck

Rupees Four hundred

51 8-9-1. insulation on slab/wall /shaft exposed to sun/atmosphere as per specifications. 350 Sq.Mtr 409

Supply, installation, balancing and commissioning of fabricated at site GSS

sheet metal rectangular/round ducting complete with neoprene rubber gaskets, Rupees One

elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings Thousand Four

and specifications of following sheet thickness complete as required.(B) hundred Fifty Three

Thickness 0.80 mm sheet Only

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with Rupees Ten

aluminium volume control dampers complete as per specifications and size & Thousand Three

shape as per site requirement and approved design. hundred Twenty Eight

Supplying & fixing of powder coated extruded aluminium Return Air Grills

54 8-11-6. with louvers but without volume control dampers complete as per specifications 13.5 Sq.Mtr 7003.00

Thousand Three Only

and size & shape as per site requirement and approved design.

Supplying, fixing testing commissioning of supply air diffuser of powder Rupees Thirteen

coated aluminium with aluminium volume control dampers with anti smudge Thousand Five

ring & removable core and size & shape as per site requirement and approved hundred Fifty Three

Supplying, fixing testing commissioning of Return air diffuser of powder coated

aluminium without volume control dampers with anti smudge ring &

56 8-11-8. 13.5 Sq.Mtr 9301.00 Thousand Three

removable core and size & shape as per site requirement and approved design..

hundred One Only

Supplying, fixing acoustic lining on wall and ceiling of AHU rooms with 50mm

thick, density 32 kg/cu.m resin bonded glass fiber insulation friction fixed in Rupees One

610mm x 610 mm frame work made of 25X50X50X50X25 mm made out of Thousand Four

0.6mm thick GI sheet U shaped channel and covered with reinforced fiber glass hundred Fifty Two

tissue and finished with 0.80 mm perforated aluminium sheet etc. Only

complete as required and as per specifications.

carry out RCC Core cutting- up to 100 mm dia./300mm thick Wall/beam/slab Rupees One

with providing PVC pipe of 3 mm thick inside and necessary finishing on both Thousand Five

ends of wall . hundred Thirty Four

Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber Rupees One hundred

insulation.(B) 40 mm dia. Twenty Nine Only

(C.) 32mm dia. Rupees One hundred

Supplying and fixing of following thickness duly laminated aluminum

foil of mat finish closed cell Nitrile rubber (Class "O") insulation on existing

duct after applying suitable adhesive for Nitrile rubber. The joints shall be

61 8-11-13. 350 Sq.Mtr. 1092.00 Thousand Ninety Two

sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape

insulation complete as per specifications and as required.

B1 /85 Expansion Valve & Dryer Filter Set for copper Piping.

/2024- Rupees Fifteen

25 MR Thousand Only

Supply Installation Testing & Commissioning of 9U Indoor

Rupees Six Thousand

Wallmount Rack with required accessories like 6 socket PDU,

Two hundred Twenty

63 Fan, 2 Hardware Mounting Packet, 1 Equipment Tray 3 Nos. 6227.57

Seven Paise Fifty

SITC of CAT6 UTP 23AWG Solid: Per Meter

Rupees Thirty Five

Paise Sixty One Only

SITC of Mixer amplifier, 240W

Rupees Eighteen

65 3 Ea. 18040.68 Thousand Forty Paise

Sixty Eight Only

SITC of Cabinet loudspeaker, 30W, black

High-fidelity music and speech reproduction

Selectable 8 ohm, 70 V and 100 V inputs

66 20 Ea. 10987.73 hundred Eighty Seven

Compact yet robust ABS enclosure

Paise Seventy Three

Supplied with adjustable mounting bracket

Complies with international installation and safety regulations

SITC of Handheld Wireless Mic with Cardiod polar pattern,Dynamic

Rupees Forty Eight

microphone ,frequency response 80Hz-18kHz,RF sensitivity < 1.0 Uv,Image

rejection>55dB,Dyanmic range >95dB and receiver having 30 or more channels

67 6 Ea. 48937.68 hundred Thirty Seven

possible,S/N ratio >100dB A,dynamic range >95db B,distortion <1 %,frequency

Paise Sixty Eight

band:618-634MHz,more than 12hrs battery life with AA battery.The transmitter

& receiver should be of metal body

Supply, Installation, Testing and Commissioning of Speaker Rupees Eighty Four

68 Cable 1.5 Sq.mm 2 Core twin Twisted cable with tin copper 285 MTR 84.89 Paise Eighty Nine

PVC Sheathed Only

Supply, Installation Testing & Commissioning 5 Mtr. HDMI Interface Cable as Rupees Six hundred

69 per the detailed Specifications supports transmission of 4K Signals as per the 6 Ea. 679.12 Seventy Nine Paise

detailed Specifications Twelve Only

Estimate Amount

Dismental Material

SR.No SOR No Item Description Qty Unit Rate

Rupees Thirty Seven

All types of Point Wiring With Accessories

46 8-13-1. 108 Pt. 37.38 Paise Thirty Eight

Lamp & Fittings (Indoor/ Outdoor)(C) LED Light With Driver Rupees Twenty One

Paise Twenty Only

Rupees One hundred

All Types of Fan

48 5-1-1. 52 Ea. 158.1 Fifty Eight Paise Ten

Total DM Amount

Note –1 All work shall be carried out as per specification attached and relevant I.S. standards or as directed.

Note –2 All the columns in schedule should be filled in by ball pan or ink and the total of the entries in the last column should be stated by

the contractor under his signature.

Note –3 Rates quoted include clearance of site (Prior to commencement of work and at its closure) in all respects and held good for the

work under all conditions, site, moisture, weather etc.

Note –4 Tenderer must be Follow make list

Note –5 To be continued on additional sheets, if found necessary.

Note –6 Dismental Material Rs. 15735.04 Will be Deducted From First R.A. Bill OR First and Final Bill.

Asst. Eng ( Elect ) Dy. Executive Engineer ( Elect ) Executive Engineer ( Elect )

Piu, Ahmedabad Piu, Ahmedabad Piu, Ahmedabad