Annual contract at unit rate for the Electric Maintenance, New Electrification work and Street light works at various University buildings in the University campus for the year 2026-27.

Item Description Qty Rate Unit Amount

Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5

sq. mm & earthwire of 1.5 sq. mm (green) both are of ISI

marked 1.1 kv grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected

concealed in /flushed on wall/ceiling , complete with 6A

Tissino Type ISI marked flush type switch / bell push and

accessories erected on Metal / PVC Box covered with

mm thick PC(Polycarbonet) /Acrylic sheet. with necessary

Lamp holder/ceiling rose / H.D.Connector as directed.

(Max. length upto 10mtr.) Cat.III (A) with medium class

Rigid PVC pipe and accessories

2 (B) with oval conduit /pvc casing caping double lock type 1 300 Each

(C) partial pvc pipe and dropes in oval conduit / pvc casing

4 (D) in existing pipe 1 258 Each

Point wiring for independent PLUG with following size

mains earth wire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires upto 10 mt length, in following below of pipe

erected complete with ISI marked 3 / 5 Pin socket and

tissino type switch erected with earth continuity connection

erected on Metal / PVC / Wooden box covered with 3 mm

thick PC (Polycarbonate) / Acrylic / Laminated sheet. [A]

For 6 amp plug and 6 amp switch with 2-1.5 sq. mm Cu.

Mains from near by switchboard/db board upto 6 mt. Cat.III

(A) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete

6 (B) with oval conduit /pvc casing caping double lock type 1 269 Each

7 (C) partial pvc pipe and dropes in oval conduit / pvc casing 1 291 Each

8 (D) in existing pipe 1 225 Each

Point wiring for on board looped PLUG with tissino type

single pole ISI marked Switch and Socket erected with

necessary connections erected on wooden /Metal/ PVC

9 Box covered with 3 mm thick PC(Polycarbonate) /Acrylic 1 67 Each

sheet for open / concealed wiring for following size. Cat.III

10 (B) For 16 Amp. 1 164 Each

Item Description Qty Rate Unit Amount

Point wiring for Tissino / Modular secondary light point

with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires, in below type of pipe to be erected

complete with earth continuity and necessary connection

with primary light with accessories erected on Metal / PVC

11 / wooden box covered with 3 mm thick PC(Polycarbonate) / 1 143 Each

Acrylic sheet for open / concealed wiring. with necessary

Lamp holder / ceiling rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be

considered as Mains for Secondary Point. Cat.III (A) with

medium class Rigid PVC pipe and accessories

12 (B) with oval conduit /pvc casing caping double lock type 1 111 Each

13 (C) partial pvc pipe and dropes in oval conduit / pvc casing 1 121 Each

14 (D) in existing pipe 1 85 Each

Point wiring for Two Way Controlled Light Point with 2-1.5

sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in existing pipe duly erected complete with

6A Tissino Type ISI marked accessories with earth

continuity erected on Metal/ PVC box covered with 3 mm

thick PC (Polycarbonet) / Acrylic sheet. with necessary

Lamp holder/ceiling rose / H.D.Connector as directed.

(Max. length upto 10mtr.) Cat.III (A) with medium class

Rigid PVC pipe and accessories

16 (B) with oval conduit /pvc casing caping double lock type 1 369 Each

17 (C) partial pvc pipe and dropes in oval conduit / pvc casing 1 399 Each

18 (D) in existing pipe 1 309 Each

(A) labour charges for complete removal of existing point

wiring including Supply mains and associated circuit wiring

of battan/ GI and PVC pipe/ casing N caping and cables

including all accessories like siwitches/holders/ switch

boards and pipes and shifting and depositing the same from

site to store or faculty, free of cost, with due proceducer of

valuation as per instruction of engineer incharge.

(B) ...do...do...but single phase D.B. With switches / MCBs /

Fuse with supply mains from DB to Switch boards including

removal of connected switch boards...do...do... As per

instruction in charge

(C) ...do...do... But three phase D.B. with Main

switch/MCBs/ busbar with supply mains from DB to Switch

21 board / DB to DB etc including connected Fuses & switch 1 102 Each

boards. ...do...do... As per instruction of engineer in charge.

Item Description Qty Rate Unit Amount

Providing & Erecting following Shockproof tissino type

accessories on 3 mm thick PC (Polycarbonet) sheet in

PVC/ Metal Box. erected on wall/ ceiling. Cat.III (A) One

no Single pole 6 A Switch / Bell push

23 (B) One no 3 pin 6 A Socket 1 31 Each

24 (C) One no Single pole 16 A Switch 1 47 Each

25 (D) One no 6/16 A Universal Socket 1 47 Each

(E) One no Single pole 16 A Switch & One no 6/16 A

26 Universal Socket combined 1 95 Each

(F) One no Single pole 16 A Switch & One no 6A/16 Amp.

27 Universal Socket combined with indicator & fuse 1 125 Each

28 (G) Bakelite ceiling, rose 1 18 Each

29 (H) Bakelite lamp holder 1 22 Each

30 (I) Tissino type Neon ‘Indicator Lamp’ 1 22 Each

31 (J) Tissino type 10A/16A Kitkat fuse 1 31 Each

(K) Electronic Hum free EME Socket Type Steps Fan

32 Regulator 1 219 Each

33 (L) Bakelite adopter for Holder to be erected. 1 9 Each

(Q) Providing & erecting ISI marked 3 pin plug top for 5/6

(R) Providing & erecting ISI marked 3 pin plug top for

(S) Supplying & erecting Approved make call bell indicator

with buzzing sound and Red light indicating lamp with Red

light button to attend the call suitable for 240 v 50 c/s

supply to be erected.

37 (T) Call bell / Buzzer,250 volts, complete erected. 1 31 Each

(U) Call bell gong type suitable for 230 volts, 50 c/s. AC

38 supply complete Erected 1 42 Each

(V) Decorative call bell Ting-tong box type 250 volts

39 complete erected 1 72 Each

40 (W) Electronic Type Cordless Call Bell 1 250 Each

(X) Supplying electrical insulation L.T. Tape role with ISI

marked having nominal width 1.8 cms nominal length

mtr nominal thickness 0.125 mm and having self adhesive

Item Description Qty Rate Unit Amount

Point wiring for Light / Bell with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in/ on

surface on wall/celing complete with 6A Modular type

switch / bell push & accessories and earth continuity of

42 following type, erected on PVC / Metallic box, single 1 449 Each

mounting base frame covered with textured/metallic front

plate modules erected on / in wall / ceiling as per pipe

erected,with necessary Lamp holder/ceiling rose / H.D.

Connector as directed. for Cat.III (Max. length upto 10mtr.)

(A) with medium class Rigid PVC pipe and accessories

43 (B) with oval conduit /pvc casing caping double lock type 1 407 Each

(C) partial pvc pipe and dropes in oval conduit / pvc casing

44 caping 1 385 Each

45 (D) in existing pipe 1 376 Each

Point wiring for FAN with 2-1.5 sq.mm & earthwire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multistrand copper wires, in following type

of pipe to be erected concealed in / flushed on wall/celing

complete with 6A Modular type switch and hum free EME

four or more step type electronic fan regulator with

separately mounted and accessories with earth continuity of

following type erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front

plate modules erected on / in wall / ceiling as per pipe

erected.with necessary ceiling rose / H.D.Connector as

directed. For Cat. III (Max. length upto 10mtr. (A) with

medium class Rigid PVC pipe and accessories

47 (B) with oval conduit /pvc casing caping double lock type 1 596 Each

(C) partial pvc pipe and dropes in oval conduit / pvc casing

48 caping 1 574 Each

49 (D) in existing pipe 1 522 Each

Point wiring for Individual(seperate) Plug with & earthwire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in existing

pipe duly erected complete with Modular type switch &

pin Plug erected on PVC / Metallic box covered with

50 appropriate front plate modules erected on / in wall / ceiling 1 476 Each

as per pipe erected with following type of accessories. For

Cat. III (Max. length upto 10mtr.) [I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (A) with

medium class Rigid PVC pipe and accessories

Item Description Qty Rate Unit Amount

51 (B) with oval conduit /pvc casing caping double lock type 1 431 Each

(C) partial pvc pipe and dropes in oval conduit / pvc casing

52 caping 1 453 Each

53 (D) in existing pipe 1 389 Each

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected

with following type of accessories. [II] For 16A Plug and

16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db

board (for A.C and Gyser) Cat.III (a) with medium class

Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete

55 (B) in existing pipe erected flushed on wall/ceiling 1 614 Each

Point wiring for Looped Plug with 6A Modular type switch

& 5 pin socket erected on PVC / Metallic box, single

56 mounting base frame covered with textured / metallic front 1 258 Each

plate modules erected on / in wall / ceiling with following

type accssories Cat.III

Point wiring for Two Way Controlled Light Point with 2-1.5

sq.mm & earthwire of 1.5 sq.mm (green) both are of .ISI

marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling, complete with 6A

Modular type switches and following type of accessories

57 erected on PVC / Metallic box, single mounting base frame 1 568 Each

covered with textured / metallic front plate modules erected

on / in wall / ceiling as per pipe erected. with necessary

batten/angle holder or ceiling rose or H.D.Connector as

directed. (Max. length upto 10mtr.) Cat.III (A) with medium

class Rigid PVC pipe and accessories

58 (B) with oval conduit /pvc casing caping double lock type 1 522 Each

(C) partial pvc pipe and dropes in oval conduit / pvc casing

59 caping 1 491 Each

60 (D) in existing pipe 1 480 Each

Providing following type of Modular Type Accessories

mounted with pvc / metallic box, single mounting base

61 frame covered with textured / metallic front plate, modules 1 152 Each

erected with necessary connection. As desired by Engineer

Incharge. Cat.III (A) One No. SP 6 Amp.

62 (B) One No 5 pin socket 1 152 Each

Item Description Qty Rate Unit Amount

(C) Two Pin/RJ-11 Telephone Socket - Two Pin Socket for

63 one gang 1 161 Each

(E) Electronic hum free four or more steps EME Fan

64 regulator 1 399 Each

65 (F) Blank Plate Single 1 25 Each

66 (G) 16 Amp. SP one way switch 1 181 Each

67 (H) 6/16Amp. Universal socket 1 200 Each

68 (I) 6 Amps. Bell Push 1 152 Each

69 (J) 6Amp. / 16 Amp. Two Way switch 1 171 Each

(K) 6A/10A/16A/20A/25A/32A Single pole Modular MCB

70 Switch 1 310 Each

71 (L) Modular Indicating Call Bell 1 329 Each

72 (M) Modular Buzzer 1 149 Each

(N) 32Amp. DP. Main swithch operating with energy key

73 tag. 1 361 Each

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction

74 boxes fixed with adhesive solution & Clamps with 1 24 Mtr.

following dia of pipes, in approved manner as directed.

Providing & Erecting heavy duty 3 way connector with

current carrying capacity of (A) 35 Amp

Providing & Erecting heavy duty 3 way connector with

current carrying capacity of (B) 70 Amp

Providing, Supplying & erecting Aluminum Channel strip

for Erecting MCB into Street light Pole junction box.

Supplying & erecting UPVC Mini trunking (PVC Casing-n-

Caping) having double-locking arrangement with grooves,

trunking of size not below 12.5 mm in height as per IS with

accessories of PVC/Resin polypropylene not below 1.8 mm

thick duly sealed in joint & erected on wall / ceiling of

following size . (A) 20 mm

Item Description Qty Rate Unit Amount

(A) Supplying and laying UPVC cable trunking system

comprising unplasticised polyvinyl, chloride rigid material

85 with ignition free & flame proof confirming BS .All 1 189 Mtr.

necessary accessories and measuring of following sizes. (i)

50 mm x 50 mm trunking

86 (ii) 75 mm x 50 mm trunking 1 278 Mtr.

87 (iii) 100 mm x 50 mm trunking 1 428 Mtr.

88 (B) UPVC COUPLER (i) For 50 mm x 50 mm trunking 1 35 Each

89 (ii) For 75 mm x 50 mm trunking 1 45 Each

90 (iii) For 100 mm x 50 mm trunking 1 66 Each

91 (C) UPVC ELBOW (i) For 50 mm x 50 mm trunking 1 55 Each

92 (ii) For 75 mm x 50 mm trunking 1 76 Each

93 (iii) For100 mm x 50 mm trunking 1 136 Each

Supplying & erecting M.S. Box having 16 Gauge painted

with red oxide or Heavy duty PVC box erected flushed on

94 wall or concealed in wall with necessary plastering & 1 47 Each

finishing as directed of following size. (A) 100 mm x

95 (B) 175 mm x 100 mm x 75 mm(d) 1 77 Each

96 (C) 200 mm x 250 mm x 75 mm(d) 1 89 Each

97 (D) 250 mm x 300 mm x 75 mm(d) 1 112 Each

Do….do….. but Anchor Roma sheet metal/PVC concealed/

98 open boxes with suitable frame …..do….do…. of following 1 112 Each

size. (A) 1/2 Module box

99 (B) 3 Module box 1 143 Each

100 (C) 4 Module box 1 164 Each

101 (D) 6 Module box 1 224 Each

102 (E) 8 Module box 1 298 Each

103 (F) 12 Module box 1 368 Each

104 (G) 16 Module box 1 406 Each

Providing and erecting wooden teakwood / PVC board with

laminated metal sheet (white) top cover board of teak wood

105 of good quality with requried fixing materials etc. complete 1 3 Sq. Inch

as per instructions of following size. (A) 25mm depth

Providing & Erecting 3mm thick Polycarbonate (PC) sheet / Sq.

acrylic Sheet with grooving as directed Inch.

Supplying and erecting nuwood 12mm thick on existing

107 angle iron frame or wooden patti. 1 386 Sq. Mtr.

Cutting of required size hole in False Ceiling for erection of

LED Indoor Lights with required tools/tackles and cutting

materials /machinery complete as per instructions incharge.

Item Description Qty Rate Unit Amount

Providing , erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles, flats, bars, channels, sections complete with cutting,

109 welding, grinding & finishing duly painted with one coat of 1 78 Kg.

redoxide with erection on site as per direction of engineer

in charge with necessary gouting, cementing, plastering &

finishing complete.

Painting by cleaning, the surface and applying one coat of

110 primer and two coats of enamel paint for meter cup-board or 1 146 Sq. Mtr.

base plate suitable to match the wall finish

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to

be erected concealed in /flushed with wall/ceiling, with

111 sq. mm copper conductor FRLS PVC insulated stranded 1 63 Mtr.

wire of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories. (a)

2 wire 1.5 sq. mm

112 (b) 2 wire 2.5 sq. mm 1 83 Mtr.

113 (c) 3 wire 1.5 sq. mm 1 83 Mtr.

114 (d) 3 wire 2.5 sq. mm 1 102 Mtr.

115 (e) 4 wire 1.5 sq. mm 1 91 Mtr.

116 (f) 4 wire 2.5 sq. mm 1 126 Mtr.

(B) with oval conduit /pvc casing caping double lock type

117 (a) 2 wire 1.5 sq. mm 1 57 Mtr.

118 (b) 2 wire 2.5 sq. mm 1 83 Mtr.

119 (c) 3 wire 1.5 sq. mm 1 77 Mtr.

120 (d) 3 wire 2.5 sq. mm 1 96 Mtr.

121 (e) 4 wire 1.5 sq. mm 1 87 Mtr.

122 (f) 4 wire 2.5 sq. mm 1 120 Mtr.

(C) partial pvc pipe and dropes in oval conduit / pvc casing

123 caping (a) 1 57 Mtr.

2 wire 1.5 sq. mm

124 (b) 2 wire 2.5 sq. mm 1 83 Mtr.

125 (c) 3 wire 1.5 sq. mm 1 77 Mtr.

126 (d) 3 wire 2.5 sq. mm 1 96 Mtr.

127 (e) 4 wire 1.5 sq. mm 1 87 Mtr.

128 (f) 4 wire 2.5 sq. mm 1 126 Mtr.

(D) in existing pipe

129 (a) 2 wire 1.5 sq. mm 1 46 Mtr.

130 (b) 2 wire 2.5 sq. mm 1 63 Mtr.

131 (c) 3 wire 1.5 sq. mm 1 63 Mtr.

132 (d) 3 wire 2.5 sq. mm 1 92 Mtr.

133 (e) 4 wire 1.5 sq. mm 1 82 Mtr.

134 (f) 4 wire 2.5 sq. mm 1 115 Mtr.

Item Description Qty Rate Unit Amount

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to

be erected on wall /ceiling with 2.5 sq. mm copper

135 conductor FRLS PVC insulated stranded wire of green 1 112 Mtr.

colour for earth continuity of following size. (A) with

medium class Rigid PVC pipe and accessories. (a) 2 wire

136 (b) 2 wire 6 sq. mm 1 147 Mtr.

137 (c) 2 wire 10 sq. mm 1 236 Mtr.

138 (d) 3 wire 4 sq. mm 1 142 Mtr.

139 (e) 3 wire 6 sq. mm 1 201 Mtr.

140 (f) 3 wire 10 sq. mm (use earth wire of 4 sqmm) 1 325 Mtr.

141 (g) 4 wire 4 sq. mm 1 181 Mtr.

142 (h) 4 wire 6 sq. mm 1 261 Mtr.

143 (i) 4 wire 10 sq. mm (use earth wire of 4 sqmm) 1 425 Mtr.

(B) with oval conduit /pvc casing caping double lock type

144 (a) 2 wire 4 sq. mm 1 96 Mtr.

145 (b) 2 wire 6 sq. mm 1 136 Mtr.

146 (c) 2 wire 10 sq. mm 1 225 Mtr.

147 (d) 3 wire 4 sq. mm 1 132 Mtr.

148 (e) 3 wire 6 sq. mm 1 196 Mtr.

149 (f) 3 wire 10 sq. mm (use earth wire of 4 sqmm) 1 320 Mtr.

150 (g) 4 wire 4 sq. mm 1 171 Mtr.

151 (h) 4 wire 6 sq. mm 1 256 Mtr.

152 (i) 4 wire 10 sq. mm 1 415 Mtr.

(C) partial pvc pipe and dropes in oval conduit / pvc casing

153 caping (a) 2 wire 4 sq. mm 1 107 Mtr.

154 (b) 2 wire 6 sq. mm 1 141 Mtr.

155 (c) 2 wire 10 sq. mm 1 231 Mtr.

156 (d) 3 wire 4 sq. mm 1 140 Mtr.

157 (e) 3 wire 6 sq. mm 1 211 Mtr.

158 (f) 3 wire 10 sq. mm (use earth wire of 4 sqmm) 1 330 Mtr.

159 (g) 4 wire 4 sq. mm 1 176 Mtr.

160 (h) 4 wire 6 sq. mm 1 266 Mtr.

161 (i) 4 wire 10 sq. mm 1 425 Mtr.

(D) in existing pipe (a)

162 2 wire 4 sq. mm 1 87 Mtr.

163 (b) 2 wire 6 sq. mm 1 121 Mtr.

164 (c) 2 wire 10 sq. mm 1 211 Mtr.

165 (d) 3 wire 4 sq. mm 1 120 Mtr.

166 (e) 3 wire 6 sq. mm 1 181 Mtr.

167 (f) 3 wire 10 sq. mm (use earth wire of 4 sqmm) 1 305 Mtr.

168 (g) 4 wire 4 sq. mm 1 156 Mtr.

169 (h) 4 wire 6 sq. mm 1 240 Mtr.

170 (i) 4 wire 10 sq. mm 1 399 Mtr.

Item Description Qty Rate Unit Amount

Mains with ISI marked ,1.5 kv grade electrolyte multi

stranded, annealed copper conductor with heat resistant

PVC insulated conforms to IS 694,IEC-227 erected in

171 existing pipe of following size ( specially for control panel, 1 12 Mtr.

relays, power switchgears, motor starters and control

wiring) with required size of copper lugs, nuts and bolts if

required. (a) One wire 1 sq. mm.

172 (b) One wire 1.5 sq. mm. 1 17 Mtr.

173 (c) One wire 2.5 sq. mm. 1 27 Mtr.

174 (d) One wire 4.00 sq. mm. 1 37 Mtr.

175 (e) One wire 6.00 sq. mm. 1 57 Mtr.

176 (f) One wire 10.00 sq. mm. 1 92 Mtr.

177 (g) One wire 16.00 sq. mm. 1 142 Mtr.

178 (h) One wire 25.00 sq. mm. 1 236 Mtr.

providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 25 KA.

at 415 V,having normal current rating up to 25 A to 100A.

179 with Fixed thermal & magnetic release suitable to work on 1 6173 Each

A.C. supply 50 c/s. with all internal connections & complete

erected in existing 16 G.M.S. housing. (ICS=100% of ICU

providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 35 KA.

at 415 V. having normal current rating 125A. with Fixed

180 thermal & magnetic release suitable to work on A.C.supply 1 8056 Each

50 c/s. with all internal connections & complete erected in

existing 16 G.M.S. housing. (ICS=100% of ICU only Cat

providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 35 KA.

at 415 V. having Normal current rating 200A.with variable

181 Thermal & magnetic release suitable to work on A.C.supply 1 16222 Each

50 c/s. with all internal connections & complete erected in

existing 16 G.M.S.housing (ICS=100% of ICU only Cat

providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 35 KA.

and above at 415 V . having normal current rating 250A.

182 with variable thermal & magnetic release suitable to work 1 20946 Each

on A.C.supply 50 c/s. with all internal connections &

complete erected in existing 16 G.M.S. housing. (ICS=100%

of ICU only Cat III)

Item Description Qty Rate Unit Amount

providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 50 KA

and above at 415 V having Normal current rating 400A.

183 with variable Thermal & magnetic release suitable to work 1 25229 Each

on A.C.supply 50 c/s. With all internal connections &

complete erected in existing 16 G.M.S. housing.

(ICS=100% of ICU only Cat III)

providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of

K.A. and above at 415 V having normal current rating up

184 to 630A. with variable thermal & magnetic release suitable 1 28174 Each

to work on A.C.supply 50 c/s. with all internal connections

& complete erected in existing 16 G.M.S. housing

(ICS=100% of ICU only Cat III)

Providing and erecting M.S. Sheet box using 16 SWG

M.S.sheet as per suitable design & size, to house the MCCB

etc. complete with locking arrangement and necessary

support with painting [One coat red oxide and two coat

enamel paint] complete as per instructions of engineer

Supplying, erecting and connecting four pole 415 volt

change over switch interior for panel mounting of approved

186 make for following Amp. Capacity etc. complete as per 1 2612 Each

instructions. Cat III

187 (B) 63Amp. 1 4785 Each

Providing and erecting busbar chamber confirming to IS-375

fabricated from 16 G.M.S. sheet, dust & vermin proof

having hinged door with rubber gasket and necessary busbar

supports with Aluminium busbar having current density not

more than 0.8 Amp. / sq.mm (Rated current / cross section

192 area) duly wraped with colour insulation tape for phase 1 2603 Rmt.

sequence, three phase & neutral each Suitable for following

current capacity with necessary painting mounted on wall or

pedestal frame of required size with necessary connections.

(A) Suitable for 63/ 100 Amp. Capacity

193 (B) Suitable for 200 Amp. Capacity 1 3061 Rmt.

194 (C) Suitable for 300 Amp. capacity 1 5141 Rmt.

195 (D) Suitable for 400 Amp. capacity 1 5753 Rmt.

Item Description Qty Rate Unit Amount

Providing and erecting busbar chamber confirming to IS-375

fabricated from 16 G.M.S. sheet, dust & vermin proof

having hinged door with rubber gasket and necessary busbar

supports with COPPER busbar having current density not

more than 1.6 Amp. / sq.mm (Rated current / cross section

196 area) duly wrapped with colour insulation tape for phase 1 4422 Rmt.

sequence, three phase & neutral each suitable for following

current capacity with necessary painting mounted on wall or

pedestal frame of required size with necessary connections.

(A) Suitable for 63/100 Amp. capacity

197 (B) Suitable for 200 Amp. capacity 1 5732 Rmt.

198 (C) Suitable for 300 Amp. capacity 1 8540 Rmt.

199 (D) Suitable for 400 Amp. capacity 1 10341 Rmt.

Supplying and erecting tripple pole & neutral 440V/ 500V

panel mounting Aluminium Busbars with four equal Nos. of

bus having current density not more than 0.8 Amp. / sq.mm

(Rated current / cross section area) duly wraped with colour

200 insulating tape for phase sequence of following current 1 661 Rmt.

carrying capacity, erected with necessary bus bar supports

/insulators, main cable socket to each busbar, erected in

existing cubical panel with necessary connections. (A)

Suitable for 100 Amp. Capacity

201 (B) Suitable for 200 Amp. Capacity 1 1037 Rmt.

202 (C) Suitable for 300 Amp. Capacity 1 1470 Rmt.

203 (D) Suitable for 400 Amp. Capacity 1 2205 Rmt.

204 (E) Suitable for 630 Amp. capacity 1 3061 Rmt.

Supplying and erecting tripple pole & neutral 440V / 500V

panel mounting Copper Busbars with four equal Nos. of

electrolyte bus having current density not more than

Amp. / sq.mm (Rated current / cross section area) duly

wraped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections. (A) Suitable for 100 Amp. Capacity

206 (B) Suitable for 200 Amp. capacity 1 3203 Rmt.

207 (C) Suitable for 300 Amp. capacity 1 4910 Rmt.

208 (D) Suitable for 400 Amp. capacity 1 7319 Rmt.

209 (E) Suitable for 630 Amp. capacity 1 10560 Rmt.

Item Description Qty Rate Unit Amount

Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated indoor type cubical panel

board having Necessary IP-42 protection and above as per

requirement made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary supporting angles, flats

including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of supplied

switch gears, busbars, with suitable size of inter connecting

210 PVC copper wire / copper-aluminum strips, rubber 1 10469 Sq. Mtr.

grommets, rib, bakelite control fuses for measuring

instruments, earth bus & earth bolts, foundation flange -

bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement, rubber gasket and heavy duty end

termination connection complete. The Panel shall be painted

with epoxy powder coating. Note:- The standard companies

switch gear shall be used and only manufacturers at CPRI

approved factory for beneficial use. (A) locally fabricated

panel board. (i) with 350 mm depth

211 (ii) With 550 mm. Depth 1 13576 Sq. Mtr.

Supplying and erecting ISI approved make power capacitor

for 440volt 50c/s. per KVAR complete to be erected on

angle iron frame (A) Metalised polypropylene dry type upto

25KVAR heavy duty

providing and erecting Miniature circuit breaker single pole

system and having breaking capacity 10 KA to be erected in

213 existing box. confirming to IS 8828/1996 with ISI Mark Cat- 1 271 Each

III (A) 0.5 Amp. to 2 Amp. Single Pole MCB

providing and erecting Miniature circuit breaker single pole

suitable to operate on 240 V A.C. system and having

214 breaking capacity 10 KA to be erected in existing box. 1 112 Each

confirming to IS 8828/1996 with ISI Mark Cat-III(B)

Amp. to 32 Amp. Single Pole MCB

Do…do… but (C) 6Amp. to 32Amp. Double Pole MCB.(C

215 curve) 1 300 Each

216 Do…do… but (D) 40Amp. Double Pole MCB.(C curve) 1 330 Each

Do…do… but (E) 6Amp. to 32Amp. Four Pole MCB.( C

217 curve) 1 596 Each

218 Do…do… but (F) 40Amp. Four Pole MCB.(C curve) 1 669 Each

219 Do…do… but (G) 63Amp. Four Pole MCB.( C Curve) 1 737 Each

Do…do… but (H) 6Amp. to 32Amp. Three Pole MCB.(C

220 curve) 1 588 Each

Item Description Qty Rate Unit Amount

221 Do…do… but (I) 40 amp. Three pole (C curve) 1 647 Each

222 Do…do… but (J) 63 amp. Three pole (C curve) 1 716 Each

Supplying and erecting 20Amp. 10KA 'C' curve single pole

MCB with 20Amp. metal clad plug socket with metal clad

223 top company fabricated powder coated sheet steel enclosure 1 527 Each

of approved etc. complete as per instructions. Cat-III

Supplying & erecting approved make Digital time switch

having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating

224 contacts Minimum switching setup time 1 minimum & LCD 1 3168 Each

display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic

enclosure & transparent cover erected as required with

necessary connection erected as directed.

Supplying and erecting approved make Segment time switch

suitable for 230V+10%16A. floating contacts with 24 hour

dial having15/30 min. segments with early manual override

switching for on & off without influencing the program

sequence with quartz time switch With power reserve,

housed in fire proof thermoplastic enclosure & transparent

cover terminal covers erected as required wire necessary

connection erected as directed.

Supplying & erecting power contactor ,AC3 duty for time

226 switch complete erected as per direction Cat III [A] 2 Pole 1 798 Each

227 [B] 2 Pole 250V 32 Amp. 1 1889 Each

228 [C] 4 pole 440V / 250V 16 Amp. 1 858 Each

229 [D] 4 pole 440V / 250V 40 Amp. 1 2791 Each

Providing & erecting Medium Voltage / High Voltage

230 Danger Notice Board sticker as per language suggested by 1 35 Each

engineer incharge of standard size as per IS-2551

Providing and erecting approved make plastic enclosure

231 fitted DIN rail suitable for incorporating one/two nos. 1 53 Each

MCB's etc. complete as per instructions.

Do…..do…… but three/four nos. of MCBs. Etc complete as

232 per instructions. 1 108 Each

Do…..do…. but sheets steel power coated enclosure

233 suitbale for incorporating one or two nos. of 1 177 Each

Supplying & fixing box for housing RCCB + MCB

combination made of 18 SWG sheet steel duly powder

234 coated with gasket, dust & vermin proof bakelite shield two 1 275 Each

earthing terminals for following type of RCCB, RCCB +

MCB (A) For 2 pole

235 (B) For 4 pole 1 446 Each

Item Description Qty Rate Unit Amount

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

236 appropriate nos. of MCBs.(The DBs should be used of same 1 629 Each

company of MCB to be used) suitable for (A) single phase

incoming and horizontal single phase outgoing (a) sheet

steel double door (IP-43) (A) Single phase 4way SS Double

237 (B) Single phase 6way SS Double door. 1 886 Each

238 (C) Single phase 8way SS Double door. 1 1152 Each

239 (D) Single phase 12way SS Double door. 1 1493 Each

(E) Three phase 4way SS Double door PPI Type outgoing

240 Horizontal box. 1 2339 Each

(F) Three phase 6way SS Double door PPI Type outgoing

241 Horizontal box. 1 2914 Each

(G) Three phase 8way SS double door PPI Type outgoing

242 Horizontal box. 1 3413 Each

(H) Three phase 12way SS double door PPI Type outgoing

243 Horizontal box. 1 3874 Each

Providing and erecting Sheet Steel powder coated Vertical

MCB distribution board (VTPN) - flush / surface mounted

double door (IP54) fitted with copper insulated busbar,

isolated neutral bar, earth bar and DIN rail, Conforms to IS

244 8623-1 & 3, IEC 61439-1 & 3, suitable for 63/100 AMP 1 5818 Each

TPN MCCB + RCCB as incomer and three phase outgoing

as per following .(The DBs should be used of same

company of MCB to be used) (a) 4 way outgoing

245 (b) 6 way VTPN 1 6497 Each

246 (c) 8 way VTPN 1 8402 Each

247 (d)12 way VTPN 1 10966 Each

Providing, erecting and connecting ELCB's/ RCCB's of

approved make confirming to IS 12640 and having

sensitivity of 30MA. and short circuit with stand capacity of

10KA and suitable for operation on single phase having

charecteristic of quick action and tripping with all advance

feature and do not incorporate any electronic componant for

following maximum rating. Cat. III (A) 25Amp. Double

249 (B) 40Amp. Double pole. 1 2235 Each

Item Description Qty Rate Unit Amount

Providing and erecting Approved make RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

following Max. rating erected as directed. Cat. III (A)

25Amp. Four pole.

251 (B) 40Amp. Four pole. 1 2637 Each

252 (C) 63Amp. Four pole. 1 3040 Each

253 (D) 100Amp. Four pole. (100MA. Sensitivity.) 1 4315 Each

Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion

free hot dipped G.I.Pipes having Outer pipe dia of 48 /

50mm having 80-200 Micron galvanising, Inner pipe dia of

25 mm having 200-250 Micron galvanising, connection

terminal dia of 12mm with constant ohmic value surrounded

by highly conductive compound with high charge

dissipation suitable for following type of applications with

chamber and heavy duty cover.(approved make OEM has to

254 submit test certificate) & having back filling compound of 1 5760 Each

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 /

meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be capable to

retain moisture for long time Necessary test report must be

submitted. [A] For Electrical installation up to 11 KV in

Length of Pipe : 2.00 mtrs

Back filling Compound :1 no. Bag of 25 Kg.

[B] For Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation,

255 SCADA)i.e. independent Earthing located in other than 1 8637 Each

normal soil i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

Providing & erecting of 14.2mm dia, 3 mtr. Long,

250micron copper coated rod, earth enhancement

compound (10Kg. Bag X 2 = 20 Kg.) with 14.2mm

universal clamp (ss), digging of earth pit for earthing with

HDPE poly plastic heavy duty Earth chamber plastic cover.

Item Description Qty Rate Unit Amount

Providing & erecting of 14.2 mm dia, 1.25 mtr long,

250micron copper coated rod , earth enhancement

257 coumpound (5 Kg bag x 1 = 5 Kg) with 14.2 mm universal 1 3604 Each

clamp (ss) ,digging of earth pit for earthing with earth earth

Providing And Erecting Pipe type Earthing having 150cm

long & 2.5cm Dia. Galvanized iron pipe with Coupling and

258 buch Burried in specially prepaired Earth pit complete with 1 369 Each

necessary 8 S.W.G Earth wire etc complete as per

instructions incharge.

For using salt and charcoal / coke as required for pipe type

259 earthing. 1 172 Kg.

Supplying and erecting funnel type earthing haivng earth

plate of following size burried in specifically prepared earth

pit 3mtr. below the ground with 40Kg. charcoal and 40Kg.

salt with alternate layers of charcoal and salt, 20mm dia G.I.

pipe with funnel with a wiremesh for watering and brick

masonary block C.I. cover complete as per para 7.3 of IS

3043 with necessary length of double G.I./ copper earth wire

Nos. 6 SWG bolted with lug to the plate and covered in

12mm dia G.I. pipe 2.5mtr. long complete connected to the

nearest swtchgear with end socket as per direction and dully

tested by earth tester confirming to IS (As per drawing) with

following specification. (A) With 30cms. x 30cms. x

0.35cms. C.I. Earth plate.

261 (B) With 45cms. x 45cms. x 0.35cms. C.I. Earth plate. 1 2568 Each

(C) With 60cms. x 60cms. x 0.315cms. Copper Earth Plate.

Providing and erecting required size copper strip for

263 earthing of HT OCB/ ACB/ Transformer LT panel board 1 795 Kg.

etc. using copper clamp

Supplying Erecting and Connecting D C Clip Insulator for

Earthing Strip.

Providing, erecting required size hot deep galvanised strip

265 for earthing of H.T. OCB/ACB/ Transformer L T Panel 1 78 Kg.

board etc. using G.I. clamp

Labour charges for removing, re-fixing, reconnecting fan

266 regulator with required fixing materials etc. complete as per 1 34 Each

Labour charges for Removing or erecting and connecting

267 ceiling fan with required materials, including carting 1 51 Each

charges complete as per instructions.

Labour charges for removing, re-erecting and reconnecting

268 ceiling fans with required fixing materials etc. complete as 1 85 Each

per instructions.

Item Description Qty Rate Unit Amount

Supplying and erecting 19/20mm dia nominal bore Medium

class M.S. pipe down rod erected duly painted for fan

complete with necessary 24/0.20 flat 3core flexible wire

Removing by providing and connecting ceiling fan/ Exhaust

Fan / Pedestal Fan / Table Fan / Cabin Fan etc. condensor

270 of 2.5/3.5/4.00 MFD of Standard, Tipcon, Keltron make of 1 65 Each

good quality or approved make complete as per instructions.

Supplying and erecting 'J' type fan hook of 8/10mm round

bar / Double Anchor Fastner with threaded check nuts of

good quality and approved quality etc. complete as per

Supplying and erecting Rubber mold for fan hook of good

272 quality and approved etc. complete as per instructions by 1 34 Each

Supplying & erecting fan hook box of 10 mm M.S. round

bar bounded to the RCC bars up to 50mm length each side

273 and pierced through a 16 Gauge M.S. box / Heavy Duty 1 108 Each

PVC box complete erected concealed in Ceiling with

necessary finishing.

Supplying & erecting approved make low noise decorative

exhaust fan having size 200mm with 1350 RPM with square

frame ABS body with inbuilt lowers & square frame.

Providing & erecting fresh air fan 250 mm dia with square

275 frame make of ABS body with louvers Cat.II 1 1559 Each

Supplying & erecting single phase approved make industrial

exhaust fan suitable for medium duty ring mounted low

276 noise operation suitable for medium duty having following 1 2054 Each

dia size and maximum speed in RPM. (A) 305 mm dia

277 (B) 380 mm dia 900 RPM 1 2740 Each

278 (C) 380 mm dia 1400 RPM 1 3083 Each

279 (D) 450 mm dia 900 RPM 1 3339 Each

Providing & erecting Power Saving white colour Ceiling

Fan with Energy Efficient star rating, double ball bearing

ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm

sweep complete having 3blades with aluminium blades with

, canopy & 30 cms. down rod erected with 24/ 0.2, 3 core

flexible wire with earthing.

Item Description Qty Rate Unit Amount

Supply, Installation, Testing and Commissioning of suitable

sweep, BEE 5 Star rated, Ceiling fan with Brush Less Direct

Current (BLDC) permanent ferrite magnet Motor, class of

insulation: B, Rust free 3 nos.Aluminium blades, 2 nos.

canopies, shackle kit with earthing provision, copper

winding, Power factor not < 0.9, Service Value (CMM/W)

minimum 6.85, Air delivery minimum 215 CMM,

RPM,230v (tolerance as per IS : 374-2019), THD < 10%,

with remote unit for Speed Control and all remaining

accessories including safety pin, nut bolts, washers,

temperature rise = 75 degree C (Max.), suitable for 140 to

285 Voltage and rectifier circuit with surge, over current

and overload protection , 50 Hz, Single phase AC Supply,

earthing etc. Complete as required.[ Make shall be approved

by Engineer in Charge] (A) 1200 mm Sweep (48")

Supply, Installation, Testing and Commissioning of suitable

sweep, BEE 5 Star rated, Ceiling fan with Brush Less Direct

Current (BLDC) permanent ferrite magnet Motor, class of

insulation: B, Rust free 3 nos.Aluminium blades, 2 nos.

canopies, shackle kit with earthing provision, copper

winding, Power factor not < 0.9, Service Value (CMM/W)

minimum 6.85, Air delivery minimum 215 CMM,

RPM,230v (tolerance as per IS : 374-2019), THD < 10%,

compitible with electronic regulator unit for Speed Control

and all remaining accessories including safety pin, nut bolts,

washers, temperature rise = 75 degree C (Max.), suitable

for 140 to 285 Voltage and rectifier circuit with surge, over

current and overload protection , 50 Hz, Single phase AC

Supply, earthing etc. Complete as required.[ Make shall be

approved by Engineer in Charge] (A) 1200 mm Sweep (48")

Providing and fixing good and approved quality with

283 required color Canopy for existing Ceiling fans complete as 1 68 Each

per instructions by EIC

Supplying and erecting approved make ocilating type

bracket fan A.C.230volt 50c/s 400/450mm sweep wall

mounted with height adjustment and rotary tilting devices

284 complete with guard 3core flexible copper wire and 3pin 1 2534 Each

plug top complete erected on polished wooden block on

wall/ celing with lead connection complete as per

instructions. Cat.II

Item Description Qty Rate Unit Amount

INDOOR LED lights:

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with body housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.9, THD < 15%, CCT 3000 K to

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates) (NOTE:

Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)(A) Tube light

with intergral driver Cat-III (A) 20 watts ,surge -2KV,IP

286 (B) 22-24 watts ,surge -2KV,IP -20, 4 feet 1 374 Each

287 (C)36 - 40 watts ,surge -2KV,IP -20, 4 feet 1 535 Each

Square/circular surface/recessed mounted Downlight wit

provision for spring loaded mounting clips complete either

with integarl or non integral driver. IP 20 CAT-III (A) 11-

15 watts ,surge -2 KV

289 (B) -----do--------but 22-24 watts ,surge -2KV 1 759 Each

Repairing of existing indoor LED light fixture(tube

light/panel light/spot light/strip light/decorative wall lights

290 etc as per sample )by suitable driver 2 kv according to LED 1 129 Each

PCB as per requirement of following rating wattage capacity

. (A) 8-15 watt capacity

291 (B)16-24 watt capacity 1 227 Each

292 (C)25-40 watt capacity 1 361 Each

Repairing of existing outdoor LED light fixture (flood

light/street light/bollard lights/decorative wall

lights/landscape light etc as per sample ) by suitable driver

4 kv,IP65 according to LED PCB as per requirement of

following rating wattage capacity . (A) 25-36 watt capacity

294 (B)38-48 watt capacity 1 566 Each

295 (C)50-80 watt capacity 1 887 Each

296 (D)90-100 watt capacity 1 1344 Each

LED Panel Light with provision for Plane front frame with

297 translucent cover fixed to housing complete IP-20. 36 watts, 1 1795 Each

600 x 600 mm, Surge- 4KV (cat III)

Providing, Supplying & erecting Motion Detector

Microwave based 15W LED Smart Light with Power saving

which automatically dim & high with detection of motion.

Item Description Qty Rate Unit Amount

Supplying and erecting LED indoor Track Light fittings

suitable to standard I, L or plus connectors in required

wattage & color temprature with metal body housing used as

a heat sink, rotates at different beam angle complete as per

Instructions of Engineer incharge. (A) 10 watts - 12 watts

300 Do…do… (B) 20 watts 1 1755 Each

301 Do…do… (C) 30 watts 1 2245 Each

Supplying and erecting Track for LED indoor light fittings

with required shapes & suitable to connect standard I, L or

302 plus connectors & LED fitting. including Supply end 1 722 Mtr.

connector complete as per Instructions of Engineer incharge.

Supplying and erecting supply standard I, L or plus

303 connectors of LED indoor track light fitting. complete as per 1 340 Each

Instructions of Engineer incharge.

Supplying, Erecting, Connecting 7.2W -240 LED per

meter(2 wire, IP-65) Strip light of required color, 17mm

304 concealed / surface Aluminum profile casing with suitable 1 552 Mtr.

current load carrying capacity driver (with 1 year warranty).

Supplying, Erecting, Connecting LED Strip Light / Rope

Light of Minimum 4.8W-120 LED per meter (2 wire, IP-65)

with non integral suitable Driver complete Cat-lll (with

year warranty).

Supplying, Erecting, Connecting LED Strip Light / Rope

Light of Minimum 7.2W -240 LED per meter,(2 wire, IP-65)

with non integral suitable Driver complete Cat-lll (with

year warranty).

Supplying Erecting and Commissioning 3 Watt LED Lamp

307 of good quality and approved make as per EIC 1 70 Each

Supplying Erecting and Commissioning 9 Watt LED Lamp

308 of good quality and approved make as per EIC 1 112 Each

Supplying Erecting and Commissioning 20 Watt LED Lamp

309 of good quality and approved make as per EIC 1 259 Each

Providing and fixing flourcent tube rod of Philips/

Osram/ Bajaj make 36watts x 120cms capacity.

Item Description Qty Rate Unit Amount

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with

company mark/name 160V to 270V,Power Factor more

than 0.95, THD < 15 %, CCT 3000 K to 6500K,

311 Luminaire efficacy> 85 lumens/watt , LED driver efficiency 1 860 Each

> 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges

of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.)

(I) Adjustable spot light with COB led having aluminium

reflector of following wattage (i) 8 Watts Cat-III

312 Do…Do.. (ii) 12 Watt Cat-III 1 967 Each

313 Do…Do.. (ii) 15 Watt Cat-III 1 1098 Each

LED OUTDOOR FITTINGS: Supplying

and erecting LED street light/Flood light fittings with high

power white LEDs of wattage of 1 watt and above

assembled on single MCPCB,efficacy more than 130 lm/w

and corrosion free high pressure die cast aluminum housing

with smooth finish powder coated and heat sinnk extruded

with diffuser and polycarbonate optics/lenses with company

mark name engraved or embossed.

120 V to 300 V, power factor more than 0.95,THD < 10 %

,CCT 5000K to 5700 K, Uniformity ratio >0.45, Luminaire

314 efficacy >85% lumens/watt. LED driver efficacy> 85 % 1 3345 Each

(each fitting shall require LM-79 and LM-80 certificates)

(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.) (A) Street

Light (IP-65), Surge protection -4KV integral and 10 kv non

integral ,Light must have 440VAC line supply protection. It

should withstand 48 hours for 440VAC line supply. Cat-III

(a) Street light (IP-65), surge 4KV (a) 36watt to 48 watts

315 (b) -------do------but above 48 watt to 60 watts 1 4997 Each

316 (c)---------do------but above 60 watt to 90 watts 1 5976 Each

317 (d)---------do------but above 90 watts to 120 watts 1 6566 Each

(B) Flood Light (IP-65), Surge -4KV,Light must have

440VAC line supply protection. It should withstand

hours for 440VAC line supply CAT-III (a) above 40 to

319 (b) ------do------but above 48 to 60 watts 1 5599 Each

Item Description Qty Rate Unit Amount

320 ( c) ------do------but above 60 to 90 watts 1 6088 Each

321 (d)---------do------but above 90 watts to 120 watts 1 7267 Each

322 (e)---------do------but above 120 watts to 160 watts 1 8454 Each

323 (f)---------do------but above 160 watts to 200 watts 1 9648 Each

324 (g)---------do------but above 200 watts to 250 watts 1 10818 Each

Labour charges for removing existing tube light fittings

325 from wall or ceiling refixing with required fixing materials 1 34 Each

as per instructions incharge.

Labour charges for removing existing tube light fittings

from wall or ceiling and shifting with Reerecting and

reconnecting existing tube light fitting with required fixing

materials as per instructions incharge.

Providing fixing and connecting 20Amp. reyrol metal socket

of approved make with required fixing materials in existing

sheet metal enclosure etc. complete as per isntructions.

Do…do…but 20Amp. Reyrol metal clad top of approved

328 make etc. make with required fixing materials in existing 1 239 Each

sheet metal enclosure etc. complete as per isntructions.

329 Do…do.. But 3 Phase TP 20 Amp Metal Plug 1 245 Each

330 Do…do.. But 3 Phase TP 20 Amp Metal Socket 1 245 Each

331 Do…do.. But 3 Phase 30 Amp Metal Plug 1 384 Each

332 Do…do.. But 3 Phase 30 Amp Metal Socket 1 384 Each

Providing fixing and connecting powder coated sheet metal

deep drawn DBs with 20 Amp. reyrol metal Plug & Socket

333 Including Insulated Neutral link, adjustable Din Railand 1 931 Each

connecting links with 20 amp SP MCB & required fixing

materials complete as per isntructions.

Providing fixing and connecting powder coated sheet metal

deep drawn DBs with 32 Amp. reyrol metal Plug & Socket

334 Including Insulated Neutral link, adjustable Din Railand 1 2002 Each

connecting links with 32 amp TPN MCB & required fixing

materials complete as per isntructions.

Labour charges for attending electric complaints such as

short circuit and restoring electric supply i.e. any type of

Electirc fault of Street lights/ in the buildings/residential

colonies and if required to coordinate with MGVCL with

due procedure. To attend such complaints in consultations

with engineer in charge during odd hours also. Complaints

to be attended by licenced holder wireman with own

tools/tackles and minor materials like insulating tape etc.

Complaints shall be ocassion based and subsequent

repairing shall not be counted as complaints..

Item Description Qty Rate Unit Amount

Hire charges for providing erecting and dismentalling

temporary ilumination consisting of LED flood light fittings

90 watts to 250 watts complete with lead wire, connection

336 etc.complete as per instructions. (NOTE: Above description 1 250 Per Day

have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between

the ranges shown.)

Labour charges for removing, refixing with shifting and

337 reconnecting the existing street light / Flood Light / LED out 1 200 Each

door Light fitting fittings with required fixing materials.

Labour charges for removing, shifting and refixing existing

338 G. I. Pipe brackets of street light fitting with required fixing 1 77 Each

materials etc. complete as per instructions.

Providing, fixing and connecting of 38/40mm dia of G. I.

Pipe of superior quality and approved quality of about

meter length with necessary bending charges of G. I. Pipe

339 bracket with required three numbers Nos.of clamps of 5mm 1 429 Each

thickness with necessary nuts, bolts, of superior quality etc.

complete as per instruction of Engineer incharge

Providing and erecting "B" class iron pipe 32 mm outside

dia and 45 cms long duly welded on 20 cms X 20 cms X

mm thick M.S. base plate, to be erected on wall or corner

for mountin street light luminaire with necessary hardware

material duly painted as per instruction of Engineer in

Providing street light pole bracket consisting of Light Class

MS.pipe of 4.2 cms. outside dia. complete with suitable

M.S. sleeve tubing of approximate 45 cms. and length

suitable for 76.5 mm / 80mm. / require size pole top having

sufficient fastners for fixing the brackets and having spread

341 of 1 mtr. length with suitable rise as per site condition & 1 562 Each

suitable welded stiffner reducer and nipple with check nut

complete painted with one coat of Red oxide / PU base

primer and two coats of Aluminium / PU paint. paint with

following nos of arms.

(A) Single Arm bracket 1Mtr.

342 (B) Double Arm Bracket 1Mtr. 1 759 Each

343 (C) Three Arm Bracket 1Mtr. 1 955 Each

344 (D) Four Arm Bracket 1Mtr. 1 1144 Each

Providing FRP/GRP arm bracket of having 15˚ arm with

345 mm OD pipe *5 mm thk,1000mm long from pole centre (A) 1 1901 Each

Single arm bracket

346 Do..do..(B) Double arm bracket 1 2414 Each

Item Description Qty Rate Unit Amount

Supplying steel tubular pole (swaged) confirming to IS-2713

(part-II) 1980. manufacturing process of steel tubular pole

should be as per IS specification. basic steel should be ISI

marked.ple should be painted by one coat of zinc comet

primer and two coats of aluminum/approved paint to be

erected on/in existing foundation. the length of pole are as

under. (A) 7.5 mtr long swaged steel tubular pole (i) Pole as

per IS code 410-SP-4 with 300 X 300 X 4 mm base plate.

(Approximate weight 67 Kg) For burial erection

(B) 8.5 mtr long swaged steel tubular pole

348 (i) Pole as per IS code 410-SP-16 with 300 X 300 X 4 mm 1 8149 Each

base plate. (Approximate weight 75 Kg) For burial erection

Supply of approved make frp/grp pole having followiing

specifications : FRP/GRP pole made by centrifugal

moulding process using thermoset resin polyester/epoxy

resin system having minimum glass content 45.0%.The pole

should be in one pieceand tapered round in shape,having

smooth outside surface finish and should be totally fre from

corrosion as well as non conductive and shock proof. Pole

should be provided with FRP/GRP base bracket dully

fabricated from metal(M.S) and dully claded with FRP/GRP

material to avoid any metal exposer and painted with PU

Pole should mechanical properties i.e 1. Specfic gravity

(ASTM D 792) 1.3‐1.8 Kg/m3, 2. Glass Content % by

weight (ASTM D 2584) 45.0 ‐55.0%, 3. Water absorption

(ASTM D 570) <0.5%, 4. Tensile Strength(ASTM D 638)

200+/‐50Mpa, 5. Flexural strength (ASTM D 790)

250+/‐50Mpa, 6.Compressive Strength (ASTM D 695)

200+/‐50MPa, 7. Yeild Strength(ASTM D638)

+/‐50MPa. Pole should be flame retardant as per IS

6746.Resin used shall be UV resistance and pigmented. Pole

should be painted with first coat of epoxy primer and then

two coat of highly weather resistance polyurethen paint to

ensure proper addhesion of the paint.Minimum thickness

shall be 80 to 100 micron.Defelection of the pole shall not

exceed more than 10.0 % of the length of the pole for the

given load.Pole should be generally made as per the

dimensional data, performance

Do..do..[B] Overall criteria

Length of 4.0 meter,and some thickness :

4mm, Top/Bottom Outside Dia. 76/143mm +/‐2.Weight of

Pole 10.0 Kg approx. (Burial depth 800 mm)

Item Description Qty Rate Unit Amount

Do..do..[C] Overall Length of 5.0 meter, Average thickness :

5mm, Top/Bottom Outside Dia. 76/160mm +/‐2.Weight of

Pole 17.0 Kg approx. ( Burial depth 800mm)

Do..do..[D] Overall Length of 6.0 meter, Average thickness

: 5mm, Top/Bottom Outside Dia. 76/176mm +/‐2.Weight of

Pole 19.0 Kg approx. (Burial depth 1000mm)

Do..do..[E] Overall Length of 7.0 meter, Average thickness :

6mm, Top/Bottom Outside Dia. 76/193mm +/‐2.Weight of

Pole 25.0 Kg approx. (Burial depth 1000mm)

Do..do..[F] Overall Length of 8.0 meter, Average thickness :

6mm, Top/Bottom Outside Dia. 76/210mm +/‐2.Weight of

Pole 39.0 Kg approx. (Burial depth 1000 mm)

Do..do..[G] Overall Length of 9.0 meter, Average thickness

: 7mm, Top/Bottom Outside Dia.76/228mm +/‐2.Weight of

Pole 40.0 Kg approx. (Burial depth 1200mm)

Do..do..[H] Overall Length of 10.0 meter, Average

thickness : 7mm, Top/Bottom Outside Dia. 76/244mm +/‐2.

Weight of Pole 46.0 Kg approx.(Burial depth 1200mm)

Providing M-20 / 1:2:4 cement concrete foundation & 70 %

PCC from bottom including excavation for the pole of size

60 x 60 x 120 cms. Deep in below ground level with plinth

of 45 cms x 45 cms(or 45 cms dia x 45 cms) high upper

ground level with necessary curing and finishing in

approved manner. ( for 7.5 & 8/8.5 mtr pole)

Painting of street light pole with bracket complete with two

358 coats of Aluminium paint for following size of pole. [A] up 1 266 Each

359 [B] up to 9 mtr. 1 335 Each

Supplying & erecting approved make SMC press moulded

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

360 having locking arrangements with mounting clamp with 1 899 Each

nuts, bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box. (A)

300mm x 200mm x 100mm [deep]

361 (B) 250mm x 200mm x 100mm [deep] 1 515 Each

362 (C)150mm x 125mm x 100mm [deep] 1 477 Each

363 (D) 140mm x 140mm x 100mm [deep] 1 298 Each

364 (E) 200mm x 140mm x 125mm [deep] 1 524 Each

365 (F) 200mm x 180mm x 100mm [deep] 1 543 Each

Item Description Qty Rate Unit Amount

366 (G) 250mm x 220mm x 135mm [deep] 1 1122 Each

367 (H) 300mm x 200mm x 135mm [deep] 1 1216 Each

368 (I) 400mm x 300mm x 190mm [deep] 1 3421 Each

369 (J) 505mm x 240mm x 160mm [deep] 1 2905 Each

370 (K) 700mm x 480mm x 210mm [deep] 1 6180 Each

371 (L) 1000mm x 690mm x 280mm [deep] 1 7945 Each

Supplying rubber matting of following thickness as per

Labour charges for removing the existing pole by making

excavation work etc. and also depositing the same at

Construction store or facutly including carting charges etc.

complete as per instructions..

Labour charges for repairing of catenary/ cables by

removing, re-erecting and re-connecting existing catenary/

cables with providing and erecting 14nos. SWG G.I. wire

374 supporting catenary/ cables and PVC reel insulators of 1 15 Rmt.

required size or binding G.I. wire of required size for fixing

the hanging cables/ catenary to the supporting 14Nos. of

G.I. wires etc. complete as per instructions.

Labour charges for Removing of catenary/ cables from

Walls or poles etc. complete as per instructions.

Providing and erecting 14Nos. G.I. wire for supporting

cables/catenary and PVC reel insulator of required size or

376 binding G.I. wire of required size for fixing hanging 1 10 Rmt.

catenary/cable to the supporting 14nos. SWG wire etc.

complete as per instructions.

Supplying and erecting Flexible PVC insulated multi strand

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed. (A)

Sq.mm 2 core round/ flat PVC sheathed

378 (B) 1.50 Sq.mm 2 core round PVC sheathed 1 31 Mtr.

379 (C) 1.50 Sq.mm 3 core round PVC sheathed 1 46 Mtr.

380 D) 2.50 Sq.mm 2 core round PVC sheathed 1 57 Mtr.

381 E) 2.50 Sq.mm 3 core round PVC sheathed 1 78 Mtr.

382 F) 2.50 Sq.mm 4 core round PVC sheathed 1 107 Mtr.

383 G) 4.00 Sq.mm 3 core round PVC sheathed 1 127 Mtr.

384 H) 4.00Sq.mm 4 core round PVC sheathed 1 177 Mtr.

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmored copper cable 1.1 KV grade to be erected as directed of fo

386 (B) 3core 6 sq.mm. 1 293 Mtr.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand / solid Copper conductor for 1.1 KV. to

387 be laid on wall with necessary clamps or in existing trench 1 209 Mtr.

/ pipe of following size of cables (A) 2core 4.00sq.mm.

388 (B) 3core 2.5sq.mm. 1 215 Mtr.

Item Description Qty Rate Unit Amount

389 (C) 3core 4.00sq.mm. 1 288 Mtr.

390 (D) 3core 6.00sq.mm. 1 396 Mtr.

391 (E) 4core 2.5sq.mm. 1 272 Mtr.

392 (F) 4core 4.00sq.mm. 1 365 Mtr.

393 (G) 4core 6.00sq.mm. 1 510 Mtr.

394 (H) 4core 10.00sq.mm. 1 677 Mtr.

395 (I) 4core 16.00sq.mm. 1 988 Mtr.

396 (J) 3 1/2 core 25 Sq. mm ( 10 Sq. mm 1/2 core) 1 1410 Mtr.

397 (K) 4 core 25 Sq. mm ( 10 Sq. mm 1/2 core) 1 1505 Mtr.

398 (L) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) 1 1867 Mtr.

399 (M) 3 1/2 core 50 Sq. mm ( 25 Sq. mm 1/2 core) 1 2438 Mtr.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of

following size of cables. (A) 4core 4sq.mm.

401 (B) 4core 6sq.mm. 1 126 Mtr.

402 (C) 4core 10sq.mm. 1 140 Mtr.

403 (D) 4core 16sq.mm. 1 154 Mtr.

404 (E) 3.5 core 25 Sq. mm ( 16 Sq. mm 1/2 core) 1 184 Mtr.

405 (F) 3.5core 35sq.mm (16 Sq. mm 1/2 core) 1 220 Mtr.

406 (G) 3.5core 50sq.mm. (25 Sq. mm 1/2 core) 1 285 Mtr.

407 (H) 3.5core 70sq.mm. (35 Sq. mm 1/2 core) 1 379 Mtr.

408 (I) 3.5core 95sq.mm. (50 Sq. mm 1/2 core) 1 491 Mtr.

409 (J) 3.5core 120sq.mm. (70 Sq. mm 1/2 core) 1 540 Mtr.

410 (K) 3.5core 150sq.mm. (70 Sq. mm 1/2 core) 1 731 Mtr.

411 (L) 3.5core 185sq.mm. (95 Sq. mm 1/2 core) 1 905 Mtr.

412 (M) 3.5core 240 Sq. mm(120 Sq. mm 1/2 core) 1 1169 Mtr.

413 (N) 3.5core 300 Sq.mm (150 Sq. mm 1/2 core) 1 1408 Mtr.

Making trench in soft soil of suitable width and 90cms Deep

for laying cable or locating the fault all over the run and

back filling the same and making the ground proper etc.

complete as per instructions.

Making trench in Hard Murrum / RCC Surface/ Tar Road of

suitable width and 90cms depth for laying any size of cable

or locating the fault all over the run and back filling the

same and making the surface as normal ground.

(B) If additional machineries like hammer driller or JCB use

416 [Add] 1 358 Mtr.

Drilling the road without breaking the road surface

(Asphalt) for laying of cable for feeding power supply by

making up to following size of holes at both ends

complete..(A) Up to 100 mm bore dia

418 (B) Up to 150 mm bore dia 1 616 Rmt.

Providing and fixing good and approved quality suitable

419 size heavy duty flange type MS ring to cover gland holes 1 29 Each

with cable for giving proper Earthing from panel or DB

Item Description Qty Rate Unit Amount

Providing and fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with outgoing tails insilating tape etc. following

size of cables. (A) 2 to 4core 2.5/4sq.mm.

421 (B) 2 to 4core 6/10 sq.mm. 1 38 Each

422 (C) 2 to 4core 16 sq.mm. 1 47 Each

423 (D) 2 to 4core 25 sq.mm. 1 52 Each

424 (E) 3.5core 35/50sq.mm. 1 76 Each

425 (F) 3.5core 70sq.mm. 1 103 Each

426 (G) 3.5core 95sq.mm. 1 131 Each

427 (H) 3.5core 120sq.mm. 1 140 Each

428 (I) 3.5core 150sq.mm. 1 191 Each

429 (J) 3.5core 185 Sq. mm 1 238 Each

430 (J) 3.5core 240 Sq. mm 1 247 Each

431 (K) 3.5core 300 Sq. mm 1 281 Each

Solder less crimping type aluminium lugs confirming to IS

suitable for cable of following size evenly crimped with

432 high pressure tools an connected to switchgear terminal with 1 6 Each

brass/ cadmium plated nut-bolts in approved manner.

433 (B) 10sq.mm. 1 13 Each

436 (E) 70sq.mm. 1 25 Each

437 (F) 95sq.mm. 1 40 Each

438 (G) 120sq.mm. 1 45 Each

439 (H) 150sq.mm. 1 62 Each

440 (I) 185sq.mm. 1 81 Each

441 (J) 240 sq.mm. 1 86 Each

442 (K) 300 sq.mm. 1 99 Each

Solder less crimping type Copper lugs confirming to IS

suitable for cable of following size evenly crimped with

443 high pressure tools an connected to switchgear terminal with 1 8 Each

brass/ cadmium plated nut-bolts in approved manner. (A)

444 (B) 10 sq .mm 1 10 Each

445 (C)16 sq. mm 1 12 Each

446 (D) 25 sq. mm 1 15 Each

447 (E) 35/50 sq. mm 1 22 Each

Disconnecting the cable connection and Providing straight

joint with PVC mould using heat shrink /cast resin type

epoxy compound Insulating material and making the joint

complete using necessary in line connectors, hardener, earth

448 continuity connection, spacers etc. and reconnecting the 1 1084 Each

same & ensure the joint resistance within the limits as per IS

etc. complete with providing due procedure to MGVCL etc.

complete as per instructions. (A) Up to 25sq.mm. Cable

Item Description Qty Rate Unit Amount

449 (B) 35 to 95sq.mm. Cable 1 1550 Each

450 (C) 120 to 300sq.mm. Cable 1 2654 Each

Providing and laying Double walled corrugated pipes

(DWC) of polyethylene (confirming to IS- 1493011) with

necessary connecting accessories of same material at

required depth for laying cable below ground/road surface

for enclosing cable and backfiling the same to make the

ground as per original. (A)50 mm outer dia

452 (B)63mm outer dia 1 74 Mtr.

453 (C)90 mm outer dia 1 96 Mtr.

454 (D)120 mm outer dia. 1 137 Mtr.

To supply skilled Electrician having minimum 05 years

practical experience for working on HT/LT system and valid

electrical licence as applicable ,issued by local authorized

electrical inspectorate. It shall be for minimum 08 hours and

only for special ocassion and to work as per instruction of

Engineer in charge.

To supply semi-skilled helper to Electrician having

minimum 02 years practical experience of working with

electrician and should be 8th pass and capable of reading

/writing in local language.It shall be for minimum 08 hours

and only for special ocassion and to work as per instruction

of Engineer in charge.

Providing Due Procedures for yearly inspection / liaising of

457 HT Connections with the IMP Department etc as per the 1 5000 Each

complete instructuctions.

Transformer oil having good resistance to high electrical

stress, high di-electric strength (50KV) low viscosity, low

458 pour point, high flash point and excellent thermal properties 1 91 Ltr

for efficient heat transfer and cooling as per I.S.335 -1972.

Filtration of transformer oil as per I. S.S. for removal of

moisture, carbon. slurry etc.by means of circulating oil

459 through vacuum pump from heating elements and filters to 1 8 Ltr

with stand the breaking strength of the oil above 40KV

beyond one minute tested in oil testing Kit. (A) on site.

Routine maintenance of Transformer in operating covering

Insulation Resistance oil breakdown strength, reconditioning

460 /replacement of silica gel, cleaning of transformer & topping 1 2568 Job

up to of oil if required .(Oil will be provided departmentally

or at extra cost.)

Testing of transformer oil by calibrated instrument for

461 dielectric breakdown strength with test report 1 428 Job

Measurement of earthing resistance by loop test with before

462 and after authorized test report after isolating & cleaning 1 250

Item Description Qty Rate Unit Amount

To carry out the routine maintenance and servicing of L.T.

cubical panel board having approximately 15 to 22 nos. of

switches/ compartments cleaning and servicing the

contacts, tightening the connections of incoming and

outgoing cables and checking the operating mechanism for

smooth functioning of the switches/MCBs/MCCBs etc and

putting them in smooth working order. Job includes minor

hardwares like washers/nut bolts etc.

Supplying Erectring & Connecting Lightning Arrestor (Set

of 3 Nos.) suitable for 11KV HT line setup.

Providing and fixing approved make Perforated C type cable

tray. Made from sheet steel. The cable tray should be

single or double bended as per required and as per IS

2062/1079 and shall be coated with hot dip galvanizing as

465 per IS 2629/4759. with max 17.5% perforation with coupler 1 305 Rmt.

plate / Fish plate and GI hardware like nut - bolt and

washers etc. erection with necessary support( included) as

per Specification and as per instruction of engineer in

charge.(A) 50 x 50 x 1.6 mm thick

466 (B) 100 x 50 x 1.6 mm thick 1 361 Rmt.

467 (C) 150 x 50 x 1.6 mm thick 1 424 Rmt.

Providing and erecting and connecting RYB LED indicator

468 lamp of good and approved quality etc as per EIC 1 386 Set

Providing, Supplying & erecting ON - Off / Trip Lamp / R /

Y / B Lamp with cover of good and approved quality etc as

per EIC to indicate Motor / panel / machine operational

Providing, Supplying & erecting of good and approved

470 quality with suitable capacity START & STOP Push button 1 215 Each

to operate Motor / Machine / Panel operations.

Providing, Supplying & erecting of good and approved

471 quality with suitable capacity EMERGENCY STOP Push 1 215 Each

button to operate Motor / Machine / Panel operations.

Supplying and erecting approved make panel mounting type

Digital Ammeter having 3 digits LED display, external CT

472 operated, calibrated for 0 to 1000 Amps suitable to operate 1 1558 Each

on 500 Volt AC , erected on existing panel board with all

connection, wiring etc complete.

Supplying and erecting approved make panel mounting type

Digital Voltmeter having 3 digits LED display, 0 to 750 AC

Volts range erected on existing panel board with all

connection, wiring etc complete .

Providing & erecting electronic overload relay with single

474 phasing preventer [ (L&T, Alstom, BCH,T.C., Siemens, 1 5753 Each

C&S make). [A] for 30 to 50 Amp.

Item Description Qty Rate Unit Amount

Providing and erecting operating coil for power contactors

475 (A) for 32A/40A 1 506 Each

Providing and wet drilling accurate and clean holes of

specified diameter in RCC walls, slabs, beam or any other

RCC memberwithout vibration by core cutting (diamond

drilling) machine of HILTI or equivalent including

476 scaffolding, safety majors, disposing the debris, cleaning for 1 679 Each

all levels/ all height as per structural consultant's drawing,

after approval of engineer in charge etc compete. Holes shall

made by authorized approved agency. a) Holes Up to 75 mm

Providing and wet drilling accurate and clean holes of

specified diameter in RCC walls, slabs, beam or any other

RCC memberwithout vibration by core cutting (diamond

drilling) machine of HILTI or equivalent including

477 scaffolding, safety majors, disposing the debris, cleaning for 1 764 Each

all levels/ all height as per structural consultant's drawing,

after approval of engineer in charge etc compete. Holes shall

made by authorized approved agency. b) Holes 100 mm dia

University Engineer

List of the Approved Products Make for Electrical Work

(A) Electrical Accessories/Modular Accessories

1. Anchor Delux/Penta, (for regular wiring)

2. Havells Crabtree

4. great white Fiana

5. C & S Primo plus

(B) PVC Casing N Caping / Trunking

2. Tirupati (Gemini)

Item Description Qty Rate Unit Amount

(E) Flourcent Tube Fittings, Tube Rod, Ballast (including T-5/CFL)

MCB, RCCB, RCBO, VTPN and MCB Distribution

(H) Change Over Switch / ATS

1. H. H. Elecon

6. Apar Anushakti

(J) XLPE Cables

(K) power saving Ceiling Fan

1. Crompton - HS / HS Plus (BEE 1 star rating)

2. Havells ES / ES PLUS (BEE 2 star rating)

3. Orient Smart Saver 50 (BEE 1 star rating)

4. USHA Appolo LX (BEE1 star rating)

(L) BLDC Fans (With Remote)

1. Orient Hector 500 (BEE 5 star rating)

2. Crompton Groove (BEE 5 star rating)

3. USHA Technix (BEE 5 star rating)

(M) BLDC Fans (Without Remote)

1. Orient Hector 500 (BEE 5 star rating)

Item Description Qty Rate Unit Amount

2. Crompton Rivera (BEE 5 star rating)

3. USHA Technix (BEE 5 star rating)

(N) Wall Fan & Padestal Fan

(O) Exhaust Fan

(P) Junction Boxes

(Q) LED lights (Indoor) / LED Bulbs

(R) LED lights (Outdoor)

(S) LED Track lights

(T) Time Switch

(U) Reyrol metal clad top / Socket

(V) FRP Street Light Poles

Creative Composite

ARC Terms and Conditions:

1. Jobs under ARC shall be carried out as per instruction of Engineer in charge and in approved manner.

2. Each material with perticular Make and model shall be approved by the Engineer in charge.

3. Contractor shall depute the qualified electrical engineer to supervise the assigned job.

4. Contractor to maintain the crue of engineer, electricians and helper to carry out the emergency maintenance

5. Contractor to use their own tools and tackles, ladders etc. required to carry out various jobs described in the

6. Engineers and electricians employed by the contractor shall have valid electrical licence as applicable, issued

Item Description Qty Rate Unit Amount

7. Contractor shall provide appropriate Personal protective equipments (PPE) (i.e. safety helmet, safety belt,

8. Contractor shall provide the daily report, particularly for maintenance jobs, in the prescribed format to

9. Contractor shall submit the duly signed completion certificate within 02 (two) days after attending the

10. Contractor to adhere the time limit prescribed for the particular job.

11. Contractor shall have to give the Guarantee of Indoor & Outdoor LED Fittings of Two Years from the date of

12. Contractor shall have to give the Guarantee of Ceilling fans for Two Years and Wall fan / Exhaust fan for one

13. Contractor shall have to give the Guarantee of Led Drivers in Street light & profile lights for one year from the