Electrical work and Electrical Low Voltage of Louis I Kahn buildings- Faculty block at Main Campus IIM Ahmedabad

Amount

A. SITC

MAIN PANEL LOCATION: (ELECTRICAL ROOM-WING 1)

HVAC PANEL LOCATION: (MAINTENANCE ROOM-WING 4)

LIGHTING PANEL LOCATION: (ELECTRICAL ROOM-WING 1)

RAW POWER PANEL LOCATION: (ELECTRICAL ROOM-WING 1)

UPS PANEL LOCATION: (MAINTENANCE ROOM-WING 4)

POINT WIRING

SITC of Primary Light Point with 1.5 sqmm FRLS wire (P+N+E) & 25mm PVC Pipe or 25mm Casing Caping Patti, 6A One Way Switch (Average Length-3 Mtr. Above length measure in Running Mains)

SITC of Two way Primary Light Point with 1.5 sqmm wire (P+N+E) & 25mm PVC Pipe or 25mm Casing Caping Patti , 6A Two Way Switch , Box , Plate (Average Length-5 Mtr Above length measure in Running Mains)

SITC of Secondary Light Point with 1.5 sqmm FRLS wire (P+N+E) & 25mm PVC Pipe or 25mm Casing Caping Patti (Average Length-2 Mtr. Above length measure in Running Mains)

SITC of 5A ON Board Point

SITC of DB controlled Primary Light Point with 2.5 sqmm FRLS wire (P+N) & 1.5 sqmm wire (E) & 25mm PVC Pipe or 25mm Casing Caping Patti, (Average Length-15 Mtr. Above length measure in Running Mains)

SITC of DB controlled Secondary Light Point with 1.5 sqmm FRLS wire (P+N+E) & 25mm PVC Pipe or 25mm Casing Caping Patti (Average Length-3 Mtr. Above length measure in Running Mains)

SITC of Fan Point with 1.5 sqmm FRLS wire (P+N+E) & 25mm PVC Pipe or 25mm Casing Caping Patti , Power Saver Regulator-1M with 6A Switch , Box , Plate (Average Length-4 Mtr. Above length measure in Running Mains)

Ceiling Fan - Supply, fixing and installing the 36 / 42 inch diameter, 3 blade, 230 VAC, 50 Hz ceiling fan complete with the motor, starting capacitor, fan assembly, hang pipe, domes,(top & bottom) Regulator, Rubber bush, required hardwares etc. The work involved the assembly testing, installation from ceiling, connecting & commissioning of the fan at site.

SITC of Exhaust Fan Point with 1.5 sqmm FRLS wire (P+N+E) & 25mm PVC Pipe or 25mm Casing Caping Patti, with 6A Switch, (Average Length-4 Mtr. Above length measure in Running Mains)

SITC of 1 No of 5A Power Point Including Switch, Socket, Box & Plate, With Mains Wire- 2.5 Sqmm (P+N+E) & 25mm PVC Pipe / Casing Caping Patti (Average Length-6 Mtr. Above length measure in Running Mains)

SITC of 2 Nos of 5A Power Point Including Switch, Socket, Box & Plate, With Mains Wire- 2.5 Sqmm (P+N+E) & 25mm PVC Pipe / Casing Caping Patti (Average Length-5 Mtr. Above length measure in Running Mains)

SITC of 3 Nos of 5A Power Point Including Switch, Socket, Box & Plate, With Mains Wire- 2.5 Sqmm (P+N+E) & 25mm PVC Pipe / Casing Caping Patti (Average Length-2 Mtr. Above length measure in Running Mains)

SITC of 1 No of 5A Power Point at ceiling level (for AC's IDU, inline fans) Including Switch, Socket, Box & Plate, With Mains Wire- 2.5 Sqmm (P+N+E) & 25mm PVC Pipe / Casing Caping Patti (Average Length-4 Mtr. Above length measure in Running Mains)

SITC of 1.Nos of 15A Power Point Including Switch, Socket , Box & Plate, With Mains Wire- 4.0 Sqmm (P+N) & 2.5 Sqmm (E) & 25mm PVC Pipe / Casing Caping Patti (Average Length-6 Mtr. Above length measure in Running Mains)

SITC of Primary Point for lighting switchboard (which includes wiring & conduiting from DB to switchboard and SB to SB looping) with 2.5 sqmm FRLS wire (P+N) & 1.5 sqmm wire (E) & 25mm PVC Pipe or 25mm Casing Caping Patti, (Average Length-12 Mtr. Above length measure in Running Mains)

SITC of Primary Point for power switchboard (which includes wiring from DB to switchboard) with 4 sqmm FRLS wire (P+N) & 2.5 sqmm wire (E) (Average Length-15 Mtr. Above length measure in Running Mains)

SITC of USB Point Including USB Socket, USB cable, Box & Plate (Item with USB cable & 25mm PVC Pipe / Casing Caping Patti. Average length - 8 Mtr. Above length measures in running length)

SITC of HDMI Point Including HDMI Socket, HDMI cable, Box & Plate (item with HDMI cable & 32mm PVC Pipe / Casing Caping Patti. Average length - 12 Mtr. Above length measures in running length)

SITC of audio Point Including Audio socket 3.5mm Jack, audio cable, Box & Plate (Item with audio cable & 25mm PVC Pipe / Casing Caping Patti. Average length - 8 Mtr. Above length measures in running length)

SITC of 10 module pop-up box with configuration of - 2 nos power, 2 nos data, 2 nos USB, 1 no HDMI, 1 no. Audio 3.5 mm jack.

Conduits Providing and fixing in position the following 2mm thick conduits exposed as called for including all accessories i.e. bends, junction boxes, outlet boxes with cover plates of ‘approved make and design’.(For External use or open locations)

20 mm dia conduit (Rate only)

25 mm dia conduit

32 mm dia conduit

SITC of PVC insulated copper conductor 1100 volts grade stranded flexible Fire Retardant Low smoke (FRLS) wired of approved make of following Sizes :-

LIFT ELECTRICAL WORK

Providing, fixing, Testing and commissioning 40 Amps TPN SDF in powder coated enclosure for lift power in Lift Machine Room / ground floor

Providing, fixing, Testing and commissioning 40 Amps TPN RCBO 300mA in powder coated enclosure for lift power in Lift Machine Room / ground floor

Providing, fixing, Testing and commissioning 32 Amps DP SDF in powder coated enclosure for lift power in Lift Machine Room (Rate only)

Providing of M.S. box duly painted incorporating 1No. of ceiling rose for Bulk head fitting ( 11 W CFL) & 1 No. 16 Amp 3 Pin socket on every floor .

Supply & Installation of bulk head fitting ( 11 W CFL) in Lift Shaft. Make as per client approval.

Wiring for following 250 volts single phase and neutral 16 amps socket outlet for lift shafts ( maintenance ) including Terminations with 2.5 sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires in concealed or surface mounted 25 mm dia MMS PVC conduit and earthing of third pin of socket outlet with 1.5 sq.mm PVC insulated copper conductor stranded flexible FRLS wire. (LIFT SHAFT). Note :- The item of switchboard on EVERY FLOOR has been covered elsewhere. (Contractor to check with Lift vendor before starting the work)

Note:- Lift Equipment /Switchgear shall be ordered after confirmation from Lift vendor.

Supply, installation, testing and 'commissioning of following UPS system.

60 KVA Three phase input, Three phase output , IGBT based, compact, low input and output THD < 4%, input pf >.95, with 42 AH, 12V. SMF batteries per inverter with battery racks for 20 minutes back up.

TELECOM & DATA SYSTEM

TELECOM SYSTEM BACKBONE CABLING

Supply, Installation, Testing and Commissioning of 20-Pair Telephone Cable from main data centre to faculty block.

Supply, Installation, Testing and Commissioning 20-Pair Krone Box in suitable M.S.Box complete.

Supply, installation of Telephone Jack Unit RJ-11 With shutter including concealed modular switchboard assembly including concealed hot-dipped GI box and front plates of poly carbonate material, necessary wiring etc. complete for Telephone Point. (Considered only for Wing-5)

Supply, Installation, Testing and Commissioning of 2-Pair Telephone Cable from Krone Box to Individual point through raceway/conduits with tagging and including with all termination and connections. (Considered only for Wing-5)

DATA SYSTEM BACKBONE CABLING

Supply, Installation, Testing & Commissioning of CAT-6a 48 Port loaded Patch panel with cable manager

Supply, Installation, Testing & Commissioning of Cat-6a UTP Patch Cord, 3ft

Supply, Installation, Testing & Commissioning of Cat-6a UTP Patch Cord, 7ft

Supply and laying of CAT6a Cable with PVC Conduites, feruule nos and all connections including LAN wiring.

Supplying, termination, testing of information outlet (RJ 45) with face plates & back boxes etc.

Supply, Installation, Testing & Commissioning of 16U Wall Mounted Closed Network rack with IP:55 and all Accessories, like vertical & horizontal cable manager, dual PDU etc. as per standard practice and having Glass Door with locking facility at the Front all complete as require.

Supply and laying of 12 core SM OS2, armoured optical fibre cable with all terminations and connections.

Supply, Installation, Testing & Commissioning of Single Mode LC 24U loaded LIU with cable manager

Supply, Installation, Testing & Commissioning of SM OS2 LC-LC Patch Cord, 15Mtr

Supply, Installation, Testing & Commissioning of SM OS2 LC-LC Patch Cord, 1Mtr

EARTHING INSTALLATION

Supply and fixing of following bare GI Strips / wires including all necessary fixing accessories and effecting connections as per specifications.

50 x 6 mm GI Strips

25 x 6 mm thick GI Strips

25 x 3 mm thick Cu Strips (Rate Only)

6.0 Sq. mm Green flexible wire upto Distribution Board in PVC conduit

50 x 6 mm Earth Bus with Sufficent Holes , Nut Bboalts connected on 2 Earthing Strip (Min Length 500 mm)

EARTHING PITS MAINTENANCE FREE EARTHING ELECTRODE / CHEMICAL EARTHING

Providing electrode earthing stations for neutral earthing consisting of Copper electrode a) Excavation in hard murram b) Dual pipe i) Length = 3000mm ii) Outer dia = 50mm iii) Inner dia = 25mm iv) Terminal hole = 14mm v) Outer wall thickness = 16 swg vi) Inner wall thickness = 12 swg vii) Galvanization = 80-100 microns outer electrodes viii) Space inside = Crystalline conductive mixture c) Back filling with special compound mixed with soil d) Brick masonry chamber with C.I frame and hinged covers. (Rate Only)

Providing electrode earthing stations for body and equipment earthing consisting of GI Electrode a) Excavation in hard murram b) Dual pipe i) Length = 3000mm ii) Outer dia = 80mm iii) Inner dia = 40mm iv) Terminal hole = 14mm v) Outer wall thickness = 16 swg vi) Inner wall thickness = 12 swg vii) Galvanization = 80-100 microns outer electrodes viii) Space inside = Crystalline conductive mixture c) Back filling with special compound mixed with soil d) Brick masonry chamber with C.I frame and hinged covers. (2 nos for Each Block, 2 nos for Lift, 2nos for UPS)

CLOSED CIRCUIT TELEVISION (CCTV) CAMERAS & ACCESSORIES

Supply, Installation, Testing and Commissioning of 4MP Indoor fixed dome, Day-Night, Low-Lux, IP based camera. Camera shall be UL Listed.

Supply, installation, testing & commissioning of 32-Channel Network Video recorder system. NVR should be capable of recording 32 cameras at D1 resolution @25 FPS 100% recording for 30 days, Required HDD for the same should be considered. Complete as per specifications.

HDD 4 TB

Supply, Installation, Testing and Commissioning of Monitoring Stations with LED monitors with 42" LED monitor in the Security Cabin/Reception Desk.

Supply, Installation, Testing and Commissioning of patch cords, patch panels, etc including enclosures and other accessories complete as required to setup the IP network of CCTV system and Suitable Rack.

Supply and laying of CAT6a Cable with PVC Conduites, feruule nos and all connections from switches to CCTV.

FIRE ALARM SYSTEM

Supply, installation, testing and commissioning of UL listed/ FM Approved microprocessor based analog addressable intelligent fire alarm control panel (4 loops) complete with central processing unit, Network communication card RS-485 port, printer port, 24 lines, with primary power supply at 230 V 50 Hz AC provided with 24/36 volts, sealed maintenance free (SMF) batteries backup (as per IS) complete with solid state boost/trickle automatic battery charger. Loop length capacity for fully loded SLC loop shall be more than 1800 meter (Twisted / non-twisted pair non-shielded wire). The panel shall have integral two way communication & voice evacuation facility address system with required number of 8 channel zoned switch amplifier and auto voice dialing facility.Panel shall have network alarm response from alarm input to signal activation less than 3 seconds. All required cards and accessories for BMS integration & Graphics shall be part of panel components and shall be supervised by panel CPU only. Fire Alarm Control Panel CPU shall communicate with all field devices (detectors and modules) which have their own on-board microprocessor communicating with the loop controller in a fully digital communication format. Syatem shall have capability of distributed intelligence & shall work in fail safe degradation mode at CPU, loop card & device level in case of failure of one out of it.

Supply, installation, testing and commissioning of UL listed/FM Approved microprocessor based analog addressable intelligent Active Repeater fire alarm control panel complete with all required necessery controls. (Rate Only)

Supply of UL listed /FM approved Intelligent Addressable Smoke detector with Fire Print Technology having responsivness of photoelectric, thermal, ionization technology and false alarm resistance along with base. The detector shall have facility to mount in different comprehensive environment like Hostile environment, Parking Garage,HVAC Ducts, Precious storage,Transformer rooms, Ware house, Dormitory and normal working environments.

Supply of UL listed/FM approved Intelligent Addressable microprocessor based, Multi detector with base

Supply,Installation,Testing & Commissioning of UL Listed/FM Approved Intelligent Addressable Manual Call Station

Supply,Installation,Testing & Commissioning of UL Listed/FM Approved Intelligent Addressable control relay modules for 3rd Party Integration such as AHU & stairs pressurization Fan, Access control integration etc. complete as required as per specifications

Supply,Installation,Testing & Commissioning of UL Listed/ FM Approved Intelligent Addressable monitor modules for 3rd Party Integration such as Sprinkler Flow Switch, Fire doors, magnetic contacts & WLD monitoring complete as required as per specifications

Supply,installation,Testing and commissioning of Responce Indicator Alarm status is indicated By Red colour LED, Operates on 12 VDC, Dual LED’s for 360deg visibility, Flush / Ceiling wall mount, Operating Voltage : 12 VD.C, Operating Current : 10mA, Alarm Indication : RED LED with required accessories (Rate Only)

Supply,Installation,Testing & Commissioning of UL Listed/FM Approved Intelligent Addressable Fault Isolator Module

Supply,Installation,Testing & Commissioning of UL Listed/ FM Approved Addressable Fire Fightrers Telephone Jack along with Control Module as per specifications (Rate Only)

Supply,Installation,Testing & Commissioning of UL Listed / FM Approved Fire Fighter Telephone System (Rate Only)

Supply,Installation,Testing & Commissioning of UL Listed / FM Approved Fire Fighters Telephone Receiver as per specifications (Rate Only)

Supply & Laying of 2 core 1.5 SQ.MM Sheilded,armoured Multistrain Copper Cable.

PUBLIC ADDRESS SYSTEM

Supply,Installation,Testing & Commissioning of Master Controller with 32 Zone voice alarm controller including all necessary control desk and microprocessor based control unit with microphone, BGM, Call Station & PC input along with complete Voice Evacuation system, Message Generator. And integration facility of broadcasting fire alarm & Voice Massages.

Supply,Installation,Testing & Commissioning of 6/8W Wall MountSpeakers with Line Matching Transformer

Supply,Installation,Testing & Commissioning of 12 W Wall Mount Speakers with Line Matching Transformer (Rate Only)

Supply,Installation,Testing & Commissioning of 480W Amplifier with following features -70 V / 100 V and 8/4 ohm outputs -Dual inputs with priority switching -19A at 230 VAC, 30A at 24 VDC -1600 VA power consumption

Supply,Installation,Testing & Commissioning of Volume controller with ON / OFF.

Supply,Installation,Testing & Commissioning of Integrated music source consisting of CD player, DVD Player, USB Port, FM etc for Voice Evacuation & Back Ground Music (should be capable of playing MP3,VCD,CD, DVD etc.).

Supply,Installation,Testing & Commissioning of Rack for mounting of all Amplifire and Player

Supply & Laying of 2c x 1.5 Sq.mm, twin parallel multi stranded copper FRLS Armoured cable.

CABLE TRAY Supply and fixing of 2mm thick GI Perforated type Vertical & Horizontal cable trays ( No Hot Dipping ) with GI suspenders and supports of the following sizes. The cable tray shall be fixed to the ceiling / wall with GI threaded rod support with 35mm x 2mm thick GI slotted "C" Channel patti at an interval of 1 meter / or the MS angle iron fabricated support depending upon the location ( for LT & LV system including space for fire alarm system cables )

1000 mm Width x 75 mm Height Perforated type cable tray with 2mm thickness in Meter room. (Rate Only)

750 mm Width x 75 mm Height Perforated type cable tray with 2mm thickness

600 mm Width x 75 mm Height Perforated type cable tray with 2mm thickness

450 mm Width x 50 mm Height Perforated type cable tray with 2mm thickness (Rate Only)

300 mm Width x 50 mm Height Perforated type cable tray with 2mm thickness

250 mm Width x 50 mm Height Perforated type cable tray with 2mm thickness

150 mm Width x 50 mm Height Perforated type cable tray with 2mm thickness

RACE WAYS Supply and instaliation of SS box type trunking of following sizes (2mm thick) with top cover including chiseling /cutting of floor & fixing.

100 x 40 mm (Rate Only)

JUNCTION BOX Supply & Fixing of following sizes of SS Junction boxes 16 gauge(304 grade) with top removable 16 gauge stainless steel. The Junction box shall have intermittent rib support. The Junction Boxes shall be powder coated.

Suitable for 50 x 40 SS box type trunking.

Suitable for 100 x 40 SS box type trunking. (Rate Only)

Suitable for 200 x 40 SS box type trunking.

Suitable for 300 x 40 SS box type trunking.

B. SUPPLY

DISTRIBUTION BOARDS -

Supply of the following way DB's fabricated out of 16G thick CRCA sheet steel, dust proof with IP:42 degree of protection, hinged lockable doors, double door design, powder coated with white shade and partitions to segregate phases, final distribution boards of the following description: Make - Legrand

6 Way VTPN MCB DB FOR LIGHTING / RAW POWER (Each Block) Cat. No. - 507726 Incomer 1No. - 63 / 40 A. TPN MCB 10 kA Cat. No. - 408683 / 408681 Outgoing 6 Nos. - 25 /32 A TP MCB - 10 KA Cat. No. - 408658

6 Way VTPN MCB DB FOR UPS POWER (Each Block) Cat. No. - 507726 Incomer 1No. - 32 / 40 A. TPN MCB 10 kA Cat. No. - 408680 / 408681 Outgoing 6 Nos. - 25 /32 A TP MCB - 10 KA Cat. No. - 408658

6 Way VTPN MCCB DB FOR PLUMBING LOAD Cat. No. - 507726 Incomer 1No. - 40 A. TPN MCB 10 kA Cat. No. - 408681 Outgoing 6 Nos. - 20 /25 /32 A TP MCB - 10 KA Cat. No. - 408658

8 way ETPN DB with PPI Kit (Lighting DB for Each Wing) Cat. No. - 507672 + 507946 Incomer 1No. - 25A. FP MCB 10 kA Cat. No. - 408698 3Nos. - 25A. DP RCB0 30mA (Per Phase) Cat. No. - 411325 Outgoing 12 Nos. - 6 / 10 / 16 /20 A SP MCB - 10 KA Cat. No. - 408593

12 way ETPN DB with PPI Kit is quoted (Raw Power / UPS Power DB for Each Wing) Cat. No. - 507673 + 507947 Incomer 1No. - 25 / 32 A. FP MCB 10 kA Cat. No. - 408699 3Nos. - 25 / 32 A. DP RCB0 30mA (Per Phase) Cat. No. - 411326 Outgoing 18 Nos. - 6 / 10 / 16 /20 A SP MCB - 10 KA Cat. No. - 408593

4 way ETPN DB (Common Passage Lighting DB for Each Floor) Cat. No. - 507670 Incomer 1No. - 16A. FP RCB0 30mA Cat. No. - 411365 Outgoing 12 Nos. - 10 /20 A SP MCB - 10 KA Cat. No. - 408593

4 Way TPN MCB DB ( EXTERNAL, FAÇADE ) Cat. No. - 507705 Incomer 1No. - 25A. FP RCB0 30mA Cat. No. - 411366 Legrand make 24 x 7 Timer & Contactor for lighting control Cat. No. - 412551 + 412631 Outgoing 12 Nos. - 10 /20 A SP MCB - 10 KA Cat. No. - 408593

RECESSED FALSE CEILING ROUND DOWNLIGHTERS - SERVICE ROOMS

Supply of Recess light aluminium, steel die cast housing with dimming option, powder painted White / Black / Custom. Power :- 10W CCT :- 5700K Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client Basic Rate - Rs. 1320 / Unit

RECESSED FALSE CEILING ROUND DOWNLIGHTERS - FACULTY CABINS

Supply of Ceiling Recess aluminium die cast housing with dimming option, powder painted White. Power :- 15W CCT :- 4000K Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client Basic Rate - Rs. 1425 / Unit

RECESSED FALSE CEILING ROUND DOWNLIGHTERS - HIGH EXECUTIVE LIGHTING

Supply of Ceiling Recess Die cast aluminium housing with dimming option, powder painted white body finish, non adjustable beam direction. Power :- 18W CCT :- 4000K Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client Basic Rate - Rs. 2200 / Unit

TRACK LIGHTING (FIXED SPOT) - INTERNAL CORRIDOR AREAS

Supply of Spots and Accent Light. Can be mounted on a track. Aluminium die cast housing with dimming option,powder painted White/Black/Custom. Fixed beam direction. Power :- 12W CCT :- 3000K/4000K Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client Basic Rate - Rs. 4410 / Unit

SUSPENDED PENDANT LIGHTING - FACULTY INTERACTION CENTER

Supply of Ceiling Suspended extruded and sheet aluminium housing with dimming option, powder painted White/Black/Custom. Power :- 34W CCT :- 4000K Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client Basic Rate - Rs. 16675 / Unit

LINEAR STRIP LIGHTING

Supply & SPOTS & ACCENTS LIGHT aluminium extrusion housing with dimming option, powder painted White/Black. Power :- 26W CCT :- 3000K/4000K Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client Basic Rate with Connector - Rs. 6180 / Unit

DECORATIVE LIGHTING SURFACE MOUNTED

Supply of Ceiling Surface mounted aluminium housing with dimming option, powder painted White/Black/Custom, fixed beam direction. Power :- 22W CCT :- 3000K/4000K Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client Basic Rate - Rs. 3780 / Unit

TRACK ACCESSORIES

Supply & Installation of 3 circuit TRACK Black/silver/white 110-240V / 50-60Hz / 3F Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client

TRACK END CAP Black/silver/white Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client

TRACK END SUPPLY, IP20, Black/silver/white Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client

TRACK CORNER 90° OUT Black/silver/white Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client

WALL BRACKET LIGHT IN SHAFT

LED Wall light with Bracket, 12W Warm white 3000K, 230V Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client

CABLES MAINS

CABLES Supply of cables including unloading, shifting onto site. All cables shall be of FRLS XLPE category as per specs.

3.5C x 400 sq. mm Al XLPE Arm Cable

3.5C x 300 sq. mm Al XLPE Arm Cable

3.5C x 240 sq. mm Al XLPE Arm Cable (Rate Only)

3.5C x 185 sq. mm Al XLPE Arm Cable

3.5C x 150 sq. mm Al XLPE Arm Cable (Rate Only)

3.5C x 120 sq. mm Al XLPE Arm Cable

3.5C x 95 sq. mm Al XLPE Arm Cable (Rate Only)

3.5C x 70 sq. mm Al XLPE Arm Cable

3.5C x 50 sq. mm Al XLPE Arm Cable (Rate Only)

3.5C x 35 sq. mm Al XLPE Arm Cable

3.5C x 25 sq. mm Al XLPE Arm Cable

4C x 16 sq. mm Al XLPE Arm Cable (Rate Only)

4C x 10 sq. mm Cu. XLPE Arm Cable

4C x 6 sq. mm Cu XLPE Arm Cable

4C x 4 sq. mm Cu XLPE Arm Cable

Supplying of double compression type Brass glands above 150 sq mm and single compression below and including 150 sq mm cable & making joint with necessary AL./CU. crimping socket as per cable mol of long neck type connecting the same to various equipment like pillar,DB , Panels,Isolators, starter, motor etc. for the following sizes:

3.5C x 400 sq. mm Al XLPE Arm Cable

3.5C x 300 sq. mm Al XLPE Arm Cable

3.5C x 240 sq. mm Al XLPE Arm Cable (Rate Only)

3.5C x 185 sq. mm Al XLPE Arm Cable

3.5C x 150 sq. mm Al XLPE Arm Cable (Rate Only)

3.5C x 120 sq. mm Al XLPE Arm Cable

3.5C x 95 sq. mm Al XLPE Arm Cable (Rate Only)

3.5C x 70 sq. mm Al XLPE Arm Cable

3.5C x 50 sq. mm Al XLPE Arm Cable (Rate Only)

3.5C x 35 sq. mm Al XLPE Arm Cable

3.5C x 25 sq. mm Al XLPE Arm Cable

4C x 16 sq. mm Al XLPE Arm Cable (Rate Only)

4C x 10 sq. mm Cu. XLPE Arm Cable

4C x 6 sq. mm Cu XLPE Arm Cable

4C x 4 sq. mm Cu XLPE Arm Cable

Supply of Hand Dryer of approved make as per Conservation Architect and Consultant. Approved Makes : Uronics XJD3B, DOLPHY DAHD0054/53,Aadit AD-145 (Rate only)

C. INSTALLATION

DISTRIBUTION BOARDS -

Installation, testing and commissioning of the following way DB's fabricated out of 16G thick CRCA sheet steel, dust proof with IP:42 degree of protection, hinged lockable doors, double door design, powder coated with white shade and partitions to segregate phases, recessed in wall or surface mounted, all wiring should be terminated with proper ferruling, with copper lugs for termination. Contractor should verify 40% workmanship space available inside distribution board. final distribution boards of the following description: Make - Legrand

6 Way VTPN MCB DB FOR LIGHTING / RAW POWER (Each Block) Cat. No. - 507726 Incomer 1No. - 63 / 40 A. TPN MCB 10 kA Cat. No. - 408683 / 408681 Outgoing 6 Nos. - 25 /32 A TP MCB - 10 KA Cat. No. - 408658

6 Way VTPN MCB DB FOR UPS POWER (Each Block) Cat. No. - 507726 Incomer 1No. - 32 / 40 A. TPN MCB 10 kA Cat. No. - 408680 / 408681 Outgoing 6 Nos. - 25 /32 A TP MCB - 10 KA Cat. No. - 408658

6 Way VTPN MCCB DB FOR PLUMBING LOAD Cat. No. - 507726 Incomer 1No. - 40 A. TPN MCB 10 kA Cat. No. - 408681 Outgoing 6 Nos. - 20 /25 /32 A TP MCB - 10 KA Cat. No. - 408658

8 way ETPN DB with PPI Kit (Lighting DB for Each Wing) Cat. No. - 507672 + 507946 Incomer 1No. - 25A. FP MCB 10 kA Cat. No. - 408698 3Nos. - 25A. DP RCB0 30mA (Per Phase) Cat. No. - 411325 Outgoing 12 Nos. - 6 / 10 / 16 /20 A SP MCB - 10 KA Cat. No. - 408593

12 way ETPN DB with PPI Kit is quoted (Raw Power / UPS Power DB for Each Wing) Cat. No. - 507673 + 507947 Incomer 1No. - 25 / 32 A. FP MCB 10 kA Cat. No. - 408699 3Nos. - 25 / 32 A. DP RCB0 30mA (Per Phase) Cat. No. - 411326 Outgoing 18 Nos. - 6 / 10 / 16 /20 A SP MCB - 10 KA Cat. No. - 408593

4 way ETPN DB (Common Passage Lighting DB for Each Floor) Cat. No. - 507670 Incomer 1No. - 16A. FP RCB0 30mA Cat. No. - 411365 Outgoing 12 Nos. - 10 /20 A SP MCB - 10 KA Cat. No. - 408593

4 Way TPN MCB DB ( EXTERNAL, FAÇADE ) Cat. No. - 507705 Incomer 1No. - 25A. FP RCB0 30mA Cat. No. - 411366 Legrand make 24 x 7 Timer & Contactor for lighting control Cat. No. - 412551 + 412631 Outgoing 12 Nos. - 10 /20 A SP MCB - 10 KA Cat. No. - 408593

RECESSED FALSE CEILING ROUND DOWNLIGHTERS - SERVICE ROOMS

ITC of Recess light aluminium, steel die cast housing with dimming option, powder painted White / Black / Custom. Power :- 10W CCT :- 5700K Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client Basic Rate - Rs. 1320 / Unit

RECESSED FALSE CEILING ROUND DOWNLIGHTERS - FACULTY CABINS

ITC of Ceiling Recess aluminium die cast housing with dimming option, powder painted White. Power :- 15W CCT :- 4000K Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client Basic Rate - Rs. 1425 / Unit

RECESSED FALSE CEILING ROUND DOWNLIGHTERS - HIGH EXECUTIVE LIGHTING

ITC of Ceiling Recess Die cast aluminium housing with dimming option, powder painted white body finish, non adjustable beam direction. Power :- 18W CCT :- 4000K Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client Basic Rate - Rs. 2200 / Unit

TRACK LIGHTING (FIXED SPOT) - INTERNAL CORRIDOR AREAS

ITC of Spots and Accent Light. Can be mounted on a track. Aluminium die cast housing with dimming option,powder painted White/Black/Custom. Fixed beam direction. Power :- 12W CCT :- 3000K/4000K Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client Basic Rate - Rs. 4410 / Unit

SUSPENDED PENDANT LIGHTING - FACULTY INTERACTION CENTER

ITC of Ceiling Suspended extruded and sheet aluminium housing with dimming option, powder painted White/Black/Custom. Power :- 34W CCT :- 4000K Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client Basic Rate - Rs. 16675 / Unit

LINEAR STRIP LIGHTING

ITC & SPOTS & ACCENTS LIGHT aluminium extrusion housing with dimming option, powder painted White/Black. Power :- 26W CCT :- 3000K/4000K Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client Basic Rate with Connector - Rs. 6180 / Unit

DECORATIVE LIGHTING SURFACE MOUNTED

ITC of Ceiling Surface mounted aluminium housing with dimming option, powder painted White/Black/Custom, fixed beam direction. Power :- 22W CCT :- 3000K/4000K Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client Basic Rate - Rs. 3780 / Unit

TRACK ACCESSORIES

Installation of 3 circuit TRACK Black/silver/white 110-240V / 50-60Hz / 3F Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client

TRACK END CAP Black/silver/white Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client

TRACK END ITC, IP20, Black/silver/white Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client

TRACK CORNER 90° OUT Black/silver/white Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client

WALL BRACKET LIGHT IN SHAFT

LED Wall light with Bracket, 12W Warm white 3000K, 230V Make :- Havells / Wipro / Abby / Jaguar or any other equivalent brand as approved by Conservation Architect or Client

CABLES

ITC, Laying of cables on cable trays, structural supports and cable supports provided, include unloading, shifting unto site. The scope includes clamping of cables by ready made G.I. spacers, saddles or clamps fabricated out of M.S. strip 3 mm thick, Treasing and Clamping of cable on cable tray, ITC of all clamping materials and hardware etc., providing cable tags made out of aluminum strip and 75x20 mm in size with cable number and size punched on it. cable tags shall be tied to cables at every 10 meter interval and at both the ends.

3.5C x 400 sq. mm Al XLPE Arm Cable

3.5C x 300 sq. mm Al XLPE Arm Cable

3.5C x 240 sq. mm Al XLPE Arm Cable (Rate Only)

3.5C x 185 sq. mm Al XLPE Arm Cable

3.5C x 150 sq. mm Al XLPE Arm Cable (Rate Only)

3.5C x 120 sq. mm Al XLPE Arm Cable

3.5C x 95 sq. mm Al XLPE Arm Cable (Rate Only)

3.5C x 70 sq. mm Al XLPE Arm Cable

3.5C x 50 sq. mm Al XLPE Arm Cable (Rate Only)

3.5C x 35 sq. mm Al XLPE Arm Cable

3.5C x 25 sq. mm Al XLPE Arm Cable

4C x 16 sq. mm Al XLPE Arm Cable (Rate Only)

4C x 10 sq. mm Cu. XLPE Arm Cable

4C x 6 sq. mm Cu XLPE Arm Cable

4C x 4 sq. mm Cu XLPE Arm Cable

ITC of double compression type Brass glands above 150 sq mm and single compression below and including 150 sq mm cable & making joint with necessary AL./CU. crimping socket as per cable mol of long neck type connecting the same to various equipment like pillar,DB , Panels,Isolators, starter, motor etc. for the following sizes:

3.5C x 400 sq. mm Al XLPE Arm Cable

3.5C x 300 sq. mm Al XLPE Arm Cable

3.5C x 240 sq. mm Al XLPE Arm Cable (Rate Only)

3.5C x 185 sq. mm Al XLPE Arm Cable

3.5C x 150 sq. mm Al XLPE Arm Cable (Rate Only)

3.5C x 120 sq. mm Al XLPE Arm Cable

3.5C x 95 sq. mm Al XLPE Arm Cable (Rate Only)

3.5C x 70 sq. mm Al XLPE Arm Cable

3.5C x 50 sq. mm Al XLPE Arm Cable (Rate Only)

3.5C x 35 sq. mm Al XLPE Arm Cable

3.5C x 25 sq. mm Al XLPE Arm Cable

4C x 16 sq. mm Al XLPE Arm Cable (Rate Only)

4C x 10 sq. mm Cu. XLPE Arm Cable

4C x 6 sq. mm Cu XLPE Arm Cable

4C x 4 sq. mm Cu XLPE Arm Cable

Fixing of Hand Dryer of approved make (Rate only)

D. MISCELLANEOUS WORK

Carefully and Safely disconnecting all electrical supply connections as directed by the PMC. Carefully removing existing Electrical wiring, AC Wiring, Cabling(open/concealed), telephone wiring(open/concealed) including conduits(open/concealed) with saddles,brackets etc., existing DB panels, Switch socket boxes(open/concealed), Panels, Control Boards of any type size etc. as directed by the PMC. Handing over all re-usable materials to PMC/Client as directed by the PMC. Shifting all usable materials at location as directed by the PMC. Carting away all debris and clean the area. Contractor to see the site before quoting.

Carefully removing existing Electrical fittings (Tube lights, spot lights/recess lights, fans of any type including hangers,rods etc., Exhaust fans etc. ....) as directed by the PMC. Handing over all fittings/ materials to PMC/Client as directed by the PMC. Shifting all fittings/ materials at location as directed by the PMC. Carting away all debris and clean the area. - Contractor to see the site before quoting.

Contractor to quote for the rebate for taking out above items as mentioned above in item no.2 and as directed by the PMC/Client. - Contractor to see the site before quoting.

Contractor to quote for the rebate for taking out above items as mentioned above in item no.2a and as directed by the PMC/Client. - Contractor to see the site before quoting.

Re-fixing of existing floor (paver blocks/Dholpur Stone) including necessary bedding of required thickness. - Contractor to see the site before quoting.

Providing & Fixing of paver block / Dholpur Stone to match with existing paver block / Dholpur Stone including necessary bedding/mortar material of required thickness, laid in existing pattern and as directed. - Contractor to see the site before quoting.

Providing & Fixing approx.12mm thk, 100mm wide wooden flat/band, fixed on wall (after laying conduits) as per design and as directed by the Conservation Architect. All exposed surfaces of wooden band are scrapped, and preapred to receive the polish. Exposed wooden flats/bands surfaces provided with required nos. of hand polishing coats of approved make as per manufacturers specifications (polish), including preparing surface as directed & to the satisfaction of the Conservsation Architect.

Refurbishing & cleaning of existing light fixture, and replacing existing lamp with new LED lamp of suitable rating. Making necessary electrical connection with safety as directed by PMC.

Rewiring of exixting light fixtures with 1.5 sq.mm FRLS wire and 20/25 mm conduit or casing caping as directed by PMC.

Providing & Fixing Band/ cove of size, made using 12mm thk Bison board/cement board as per drawing, fixed/hanged from structural ceiling using adjustable hanging M.S. Powder coated(approved shade) rods of required dia.(min. 8mm thk dia.), spaced 1000mm c/c or as required (both sides of cove), as per drawings and to the satisfaction of Conservation Architect. Cove to have provision to house strip light as per drawing or as directed by the Conservation Architect.

Corridor along South wall

Pasage between Cabins (wings passages)

Carefully Removing all existing AC Ducts (of any size, shape, exposed/unexposed, at any level) including insulation, grills, suspenders, dampers, collars, connections etc. at any level, any location etc. as directed by the PMC/Project Manager, without damaging anything, clearing the area etc. complete. Carting away the debris. Shifting and Handing over the materials to PMC / Client as directed.- It is advisable Contractor to visit and inspect the site/locations before quoting.

Contractor to quote for the rebate for taking out the scrap from above item no.1512 as directed by the PMC/Client. It is advisable Contractor to visit and inspect the site /locations before quoting.

DIGITAL ENGINEERING PROJECTS PRIVATE LIMITED

Patel Electricals

ADISHWARAM CORPORATION