Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 LAccepted-Finance | L1 | Accepted-Finance L1 | |
| 2 | L2₹1.7 L+₹1,271.21 (0.75%)Accepted-Finance VAIKOM BLOCK THALAVADICHIRA VAIKOM | KOTTAYAM | KERALA | 686143 | L2 | Accepted-Finance L2 |
| Sl No | Description | Qty | Unit | Krishnakumar.g L1 | RAVIKUMAR K K L2 |
|---|---|---|---|---|---|
| 1.00Renovation of CDS Hall | |||||
| 1.00 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 44.4 | kg | 541 ₹24,020.4 Lowest | 546 ₹24,242.4 |
| 1.00 | 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | 14.91 | sqm | 1,186 ₹17,683.26 Lowest | 1,195 ₹17,817.45 |
| 1.00 | 14.5.1:Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :Float glass panes of thickness 4 mm (weight not less than 10kg/sqm) | 4.26 | sqm | 1,175 ₹5,010.2 Lowest | 1,185 ₹5,052.84 |
| 1.00 | 50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | 3.36 | sqm | 3,214 ₹10,799.04 Lowest | 3,232 ₹10,859.52 |
| 1.00 | 50.9.4.1:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood | 2.18 | sqm | 2,865 ₹6,257.16 Lowest | 2,880 ₹6,289.92 |
| 1.01 | OD161683/2026-2027:Labour | 2 | Day | 1,076 ₹2,152 Lowest | 1,085 ₹2,170 |
| 1.01 | OD161685/2026-2027:Supplying and fabricating PVC door with frame in locally available best quality including cost
of all fitting ,labour charge etc complete | 3.2 | sqm | 2,905 ₹9,296 Lowest | 2,925 ₹9,360 |
| 1.01 | OD161699/2026-2027:Carpenter for Repairing Doors and Windows | 1 | no | 1,191 ₹1,191 Lowest | 1,198 ₹1,198 |
| 1.01 | OD161721/2026-2027:Engaging Labour for Plumbing work | 1 | no | 1,191 ₹1,191 Lowest | 1,198 ₹1,198 |
Tender Value
₹1.7 L
EMD Value
₹4,234
Closing Date
14 Sept 2026, 6:00 pmClosed
AE
lid@ew kodamthuruth gp
Annual Plan Kodamthuruth GP 2026 27 Renovation of CDS Hall in Ward 9 Proj No 309 General Civil Work
2026_LSGD_867485_10
05/TENDER/AE/LIDEW/KDM/26-27
Open Tender
Civil Works - Others
Item Rate
AE
Please refer Tender documents.
6 documents required · 6 mandatory
₹555
Yes
₹4,234
Yes
1 Oct 2026
3 Sept 2026
16 Sept 2026
3 Sept 2026
14 Sept 2026
3 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Renovation of CDS Hall | |||||
| 1.001 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 44.4 | kg | - | - |
| 1.002 | 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | 14.91 | sqm | - | - |
| 1.003 | 14.5.1:Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :Float glass panes of thickness 4 mm (weight not less than 10kg/sqm) | 4.26 | sqm | - | - |
| 1.004 | 50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | 3.36 | sqm | - | - |
| 1.005 | 50.9.4.1:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood | 2.18 | sqm | - | - |
| 1.006 | OD161683/2026-2027:Labour | 2 | Day | - | - |
| 1.007 | OD161685/2026-2027:Supplying and fabricating PVC door with frame in locally available best quality including cost
of all fitting ,labour charge etc complete | 3.2 | sqm | - | - |
| 1.008 | OD161699/2026-2027:Carpenter for Repairing Doors and Windows | 1 | no | - | - |
| 1.009 | OD161721/2026-2027:Engaging Labour for Plumbing work | 1 | no | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_1469230.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.29 MB
epayment.pdf
Tender Documents • 0.24 MB
affidavit.pdf
Tender Documents • 0.24 MB
integritypact.pdf
Tender Documents • 0.24 MB
preliminaryagmnt.pdf
Tender Documents • 0.26 MB
formoftender.pdf
Tender Documents • 0.26 MB
BOQ_1469230.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .