NIQ-22- (EL) of 2025-2026(SL NO 08)

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Superintending Engineer(Elect) , NBDD

Name of Work: Construction of Community Hall at Sadipurhat Bangitola GP under Kaliachak-II Block in the District of Malda - Electrification work.

Contract No: NBDD/BS/SE /NIQ- 22 (SL NO 08) of 2025-2026

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE should be quoted including all taxes and charges in (%) of the cost of DPR (Excluding contingency charges as applicable) [Rate Quoted without percentage symbol] Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Supplying and fixing 240V, 63A Sheet steel Main Switches on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (MAKE- as per E.I.C) 1 00 SET 0.0000 Excess(+) Full Conversion INR

2 Supplying & fixing sheet metal (16 SWG) Iron Clad 240 V, 63 A 2 x 20x5 mm Busbar chambers of size 300x150mm on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991)-1mtr.length 2 00 SET 0.0000 Excess(+) Full Conversion INR

3 Supplying and fixing of double door 2+12 way IP-43 SPN MCB distribution board with 1 No. 40 A SP MCB as incomer and 13 nos. 6-32 A SP MCB as outgoing complete with Din Rail, Earth, Neutral & Phase Bars etc. to be partially recessed in wall with earthing attachment. (Make-as per E.I.C) 3 00 Nos. 0.0000 Excess(+) Full Conversion INR

4 Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire forECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed onModular GI / PVC switch board with top cover plate on wallincl. mending good damages to original finish. [PVC casingcapping and Switch board both on surface] Average run 8 mtr 4 00 Point 0.0000 Excess(+) Full Conversion INR

5 Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. with S & F 6A 5 pin Modular type plug socket and switch (Brand approved by EIC) fixed on 4 Module GI / PVC switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface] On Board 5 00 Point 0.0000 Excess(+) Full Conversion INR

6 Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI/ PVC Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 6 00 EACH 0.0000 Excess(+) Full Conversion INR

7 Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI/ PVC Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy.connections with PVC Cu wire and earth continuity wire etc. 7 00 each 0.0000 Excess(+) Full Conversion INR

8 Fixing only Single/twinfluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length. 8 00 each 0.0000 Excess(+) Full Conversion INR

9 Fixing only 300 mm dia exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection. 9 00 each 0.0000 Excess(+) Full Conversion INR

10 Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For Al 30 cm Exhaust fan (12") 10 00 each 0.0000 Excess(+) Full Conversion INR

11 Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length 11 00 Each 0.0000 Excess(+) Full Conversion INR

12 Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire 12 00 Each 0.0000 Excess(+) Full Conversion INR

13 Fixing only bulk head /ceiling fitting on wall /ceiling by screws etc. 13 00 Each 0.0000 Excess(+) Full Conversion INR

14 Supply of surface mounted12 watt slim LED panel with aesthetic finish powder coated in white housing luminaire (square/round) to be fixed on ceiling at in corridor, stair etc. with all arrangement and necessary connection. (Brand approved by EIC) 14 00 Set 0.0000 Excess(+) Full Conversion INR

15 Supply of 240V LED tube batten light with high efficacy for modern application made of extruded Alluminium housing and high quality defuser for better and uniform illumination with all necessary connection and earthing attachment . (MAKE- as per E.I.C) 15 00 Set 0.0000 Excess(+) Full Conversion INR

16 Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling with 10 W LED lamp. (as per E.I.C) 16 00 Set 0.0000 Excess(+) Full Conversion INR

17 Supply of 250 V 300 mm. sweep, 900 rpm industrial type heavy duty (ISI)high speed exhaust fan. (MAKE- as per E.I.C) 17 00 Nos. 0.0000 Excess(+) Full Conversion INR

18 Supply of 250 V 400mm sweep Wall fan complete fittings on wall , including Drilling, mending good damagesin all respect with an necessary connection.(MAKE- as per E.I.C) 18 00 Nos. 0.0000 Excess(+) Full Conversion INR

19 S & F 250 V 1200 mm sweep AC ceiling fan (ISI) complete with blades, canopy, down rod etc. having fixed with 2 nos ball bearing fixing the same, painting of down rod, connection by supplying 3×1.5 sq. mm stranded copper wire. (MAKE- as per E.I.C) 19 00 Each 0.0000 Excess(+) Full Conversion INR

20 Supplying & Fixing of Box type fan clamp of 150mm dia & 80mmdepth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box 20 00 Each 0.0000 Excess(+) Full Conversion INR

21 Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. 21 00 Each 0.0000 Excess(+) Full Conversion INR

22 Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. (a) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) 22 00 Mtr. 0.0000 Excess(+) Full Conversion INR

23 b) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) 23 00 Mtr. 0.0000 Excess(+) Full Conversion INR

24 c) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) 24 00 Mtr. 0.0000 Excess(+) Full Conversion INR

25 i) Earthing with 50 mm dia GI pipe (ISI-M) 3.64 mm thick × 3.04 mtr long and 1 × 4 SWG (Hot dip) wire 4 mtr long) 13 mm dia × 80 mm long GI bolts double washers incl. S & F 15 mm dia GI pipe protection (1 mtr long) to be filled with bitumen party under the ground level and partly above ground level driver to an average depth of 3.65 metre below the ground level & restoring the surface duly rammed. 25 00 Nos. 0.0000 Excess(+) Full Conversion INR

26 S & F earth bus bar of GI (Hot Dip) MS flat of 50 mm × 6 mm on wall is having clearance of 8 mm from wall including providing drilled holes on the bus bar complete with GI bolts, nuts, washers spacing insulators tc. As required. 26 00 Set 0.0000 Excess(+) Full Conversion INR

27 Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe including Extra for treatment of soil by using salt & charcoal or coke for plate electrode 27 00 set 0.0000 Excess(+) Full Conversion INR

28 Supply of 1.1 KV grade PVC/A Al cable : 2 core X 10 sq mm (Make -as per E.I.C) 28 00 mtr. 0.0000 Excess(+) Full Conversion INR

29 Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting 29 00 mtr. 0.0000 Excess(+) Full Conversion INR

30 S & F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture -proof entry of XLPE/PVC armoured cables as bellow. (2 core X 10 sq mm) 30 00 Nos. 0.0000 Excess(+) Full Conversion INR

31 Finishing the end of following XLPE/PVC armoured cable by crimping method incl.S & F solderless socket (Dowels make,) tapes,anticorrosive paste & joining materials. (2 core X 10 sq mm) 31 00 Set 0.0000 Excess(+) Full Conversion INR

32 Supply & laying of 3 X 2.50 sq. mm PVC insulated copper conductor FR wire from loop box to fittings in 15 mm dia polythene pipe including connection as required. 32 00 Mtr. 0.0000 Excess(+) Full Conversion INR

33 Supplying and fixing 4 WAY MCB SS enclosure with IP-20/30 protection, powder coated including 2 NOS 6-32A two pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment (Havells/Legrand/L&T) 33 00 SET 0.0000 Excess(+) Full Conversion INR

34 Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting 34 00 Nos. 0.0000 Excess(+) Full Conversion INR

35 Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint 35 00 Nos. 0.0000 Excess(+) Full Conversion INR

36 Supply of LED Street light luminaire with high power LED (Make Crompton/HPL/Havells) 36 00 Nos. 0.0000 Excess(+) Full Conversion INR

37 Sinking of Deep Tube well: Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the onnection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. (a) For depth upto 150 metre (i) 80 mm dia. boring etc. 37 00 MTR 0.0000 Excess(+) Full Conversion INR

38 Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (i) 80 mm dia. (internal) 38 00 MTR 0.0000 Excess(+) Full Conversion INR

39 Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications. (i)80 mm dia. 39 00 MTR 0.0000 Excess(+) Full Conversion INR

40 Labour for jointing and lowering pipes including strainer within the tube well bore vertically with necessary sockets, special fittings and welding as required including cost of all jointing materials, hire charges of tools and plants, cutting pipes to required sizes, making threads, welding pieces together etc. as necessary as per direction of the Engineer-in-charge. Upto 100 mm dia. pipe 40 00 MTR 0.0000 Excess(+) Full Conversion INR

41 Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required. 41 00 DAY 0.0000 Excess(+) Full Conversion INR

42 Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete. 42 00 CU. M 0.0000 Excess(+) Full Conversion INR

43 Labour for making arrangement for showing verticality test including the cost for hire charges of tools and plants, scafolding, labour etc. all complete. 43 00 LS 0.0000 Excess(+) Full Conversion INR

44 Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction. 44 00 LS 0.0000 Excess(+) Full Conversion INR

45 Supply, fitting, fixing and lowering the following with fabrication as required: (a)80 mm dia bottom cap. 45 00 NOS 0.0000 Excess(+) Full Conversion INR

46 (b)80 mm dia Top cap with hole. 46 00 NOS 0.0000 Excess(+) Full Conversion INR

47 (c) Threaded Adopter ( 80 mm Dia). 47 00 NOS 0.0000 Excess(+) Full Conversion INR

48 Supplying & fixing medium gauge 50 mm dia GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required 48 00 MTR 0.0000 Excess(+) Full Conversion INR

49 Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (i) CPVC Pipes Class-1, SDR-11 (32 mm Dia) 49 00 MTR 0.0000 Excess(+) Full Conversion INR

50 S & F suitable size of M.S. Flat clamp for holding the column pipe, pump motor in the tube well with necessary nuts, bolts, washer as per direction of EIC. 50 00 Sets. 0.0000 Excess(+) Full Conversion INR

51 S & F 20 mm dia G.I. Pipe (ISI-M) for protection of cable. 51 00 Mtr. 0.0000 Excess(+) Full Conversion INR

52 Supply and Installation of 1 HP Submersible pump motor set suitable for 80 mm dia deep tube well capable for discharging 2.4 M'/h of Clear water at a total head of 42 mtr having a discharging outlet of 32 mm dia with 4 sqmm 2 core PVC flat copper cable of 50 mtr including connection with DOL starter as per EIC. 52 00 Sets. 0.0000 Excess(+) Full Conversion INR

53 Supply and delivery of direct on line ( DOL) strater panel board conforming to ISl3947 and IEC 947 of suitable HP rating for operation in 230V (+10%) AC, single phase, 50HZ(+5yo) comprising of ammeter, voltmeter, thermal overload relay,2 pole magnetic contactor, under voltage protection, indicating lamp, capacitors, on/off push buttons including 5 way connector, wiring with l/1.5 sq. mm PVC insulated copper wire, powder coated vermin proof box of following capacities:- (i) I H.P. (Relay Range 6-10 Amp.) 53 00 set 0.0000 Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information