CA NO. CWE/HILLS/RKT/153 OF 2025-2026 REPAIR/ RESURFACING TO ROAD, ROAD SIDE BERMS NEAR KUMAON OFFRS MESS TO JHULA DEVI TCP (IN CERTAIN PATCHES) OF RANIKHET UNDER GE (MES) RANIKHET

M&L for Prepration of existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning and cleaning surface with gunny bags to remove all loose dirt etc

Applying evenly a priming tack coat using paving bitumen VG-10 @ 5Kg/10 Sqm, all as specified and directed.

M&L for Bituminous premixed carpet 3cm consolidated thickness using paving bitumen with 0.405 cum of stone chippings mixed with 21.90 kg of binder, rolled and compacted to required camber and gradient

M&L for Premixed sand seal coat using paving bitumen with 0.06 cum of sand mixed with 6.8 kg of bitumen, applied and rolled to a uniform smooth surface

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm , thickness exc 50 mm and n exc 100 mm deep

M&L for Prepration of water bound macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning and cleaning surface with gunny bags to remove all loose dirt etc

Applying evenly a priming/tack coat with paving bitumenbituminous primer VG-10 @ 10kg/10Sqm

M& L for Premix Bituminous macadam of paving bitumen VG-30 any penetration with binder content of 4.00% by weight of total mix, any penetration laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less).

Demolition of hard core in ground floors and berms, all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level)

M & L for 200mm thick (spread thickness) soling (or sub base) with broken boulders or quarried stones (granite or trap or basalt stones ) of size rang 100 mm to 150 mm, deposited, spread, levelled in one layer, interstices filled, surface formed, rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller, complete all as specified

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.

M&L for 75mm thick plain cement concrete 1:4:8, type D2 (using 40 mm graded stone aggregate) as in sub base to flooring, complete all as specified & directed by Engr-in-charge.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.

Demolition brick work or stone/ boulder masonery built in cement mortar including all quoins , pillars etc complete all as specified and directed.

M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:6)

M&L for rendering 15 mm thick on concrete masonry surface in cement mortar 1:4 and finished even & smooth without using extra cement, complete all as spd and directed.

S & F Cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions, in repairs.

S & F in repair, metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1, complete all as specified and directed.

M&L for laying hot applied thermoplastic compound (paint) 2.5mm thick including reflecting glass beads incl cost of all materials, labour, machinery, T&P etc. required for proper completion of work incl all other charges. The finished surfaces to be level, uniform and free from streaks and holes as per MORTH specification No. 803 as per IRC. Painting lines, dashes, arrows, letters etc. on roads, pavements and the like n exc. 10 cm wide with road marking paint, white or golden yellow complete all as specified and directed.

Please Enable Macros to View BoQ information