E Tender No 20/EDC(K)/2021-22

Amount

Supply Item

Supply of Aluminium Lug Size 400 sq mm made of best Quality Pore Line and Without Defeets ISI Standerd. (As Per Specification & Drawing of UPCL)

Supply of Aluminium Lug Size 150 sq mm made of best Quality Pore Line and Without Defeets ISI Standerd. (As Per Specification & Drawing of UPCL)

Supply of Aluminium Lug Size 95 sq mm made of best Quality Pore Line and Without Defeets ISI Standerd. (As Per Specification & Drawing of UPCL)

Supply of Aluminium Lug Size 70 sq mm made of best Quality Pore Line and Without Defeets ISI Standerd. (As Per Specification & Drawing of UPCL)

Supply of Cross arm Holding Clamp for PCC Pole made of M.S. Flate Size 50x6 mm duly Red Oxide Painted with Fitted 18m dia hole for 65x16 mm nut and bolts and washer without cracks & burrs for Dead End Clamp. (As Per Specification & Drawing of UPCL)

Supply of Stay Clamp for PCC Pole made of M.S. Flate Size 50x6 mm duly Red Oxide Painted with Fitted 18m dia hole for 65x16 mm nut and bolts and washer without cracks & burrs. (As Per Specification & Drawing of UPCL)

Supply of Earth wire Clamp for PCC Pole made of M.S. Flate Size 50x6 mm duly Red Oxide Painted with Fitted 18m dia hole for 65x16 mm nut and bolts and washer without cracks & burrs. (As Per Specification & Drawing of UPCL)

Supply of F Clamp made of M. S. Flat for P.C.C Pole of size 65x6 mm duly Red Oxide Painted with Fitted 18m dia hole for 65x16 mm nut and bolts and washer without cracks & burrs.(As Per Specification & Drawing of UPCL)

Supply of HT Fuses Set with Fuse Wire. (As Per Specification & Drawing of UPCL)

Supply of LT Fuses Set with Fuse Wire. (As Per Specification & Drawing of UPCL)

Supply of Stone Pad as Per Specification of UPCL.

Supply of Aluminimun Binding Wire as per Norms.

Supply of all Type of Nut Bolts as per Specification of UPCL.

Supply of MCCB 150 A with MCCB Box/ Pannel 3 phase/ 4 poles. MAKE- (IS Complied Reputed Company)

Pole/HT/LT Line & TF Installation Work

Cartage of the following material by private truck from store centre Rudrapur /Haldwani/ Kashipur to work site dump store approx. distance 10 to 80 Km. including loading into truck and unloading at work site. Dump store and carriage from dump store to pit site.

PCC Pole 8.5 Meter Long

63 KVA T/F

100 KVA T/F

250 KVA T/F

Small Line Material including Conductor & other

Excavation of Earth for Pole Pit of Size (.9x.6x1/6) of pole length in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and diposal of surplus soil as directed complete work.

Erection of PCC Pole after digging of pit size 0.6×0.6 mtrs & 1/6 length of support on 300×300×75 mm stone pad including fixing with all accessories complete in all respect as per Specification of UPCL.

Single support of PCC Pole 8.5 Meter Long

Double support of PCC Pole 8.5 Meter Long

Muffering of PCC Pole in size (.45cmx.6cm) radious with CC ratio 1:3:6 (1Cement :3core sand:6 graded stone 10mm nomial size) Block size 45cm height from ground level Including cost of material in all respect.

Grouting of Pcc pole in size (.45x.45x1/9) length of support in CC ratio 1:4:8 (1Cement:4Graded Stone:20mm nomial size:8 coarse sand) Block Including cost of material in all respect.

Excavation of earth for Stay set pit of size .6x.6x1.2 Mtr Length in all type of soil including proper dressing of sides and ramming of bottom including getting out soil and disposal of surplus excavation soil as directed complete work in all respect.

Fixing and tightening of stay set with pole and stay rod on required tension as per respo for 11KV Line

Grouting of Stay set in size (.6x.6x.3) in CC ratio 1:4:8 (1Cement:4Graded Stone:20mm nomial size:8 coarse sand) Block Including cost of material in all respect.

Fabrication of Single Pole, Double pole Straight Cross arm T off Top and Dropper, Brecing Channel of M.S. Channel100x500 mm & M S Angle 65x65x6 mm Cutting and Holling Complete Work as per Specification of UPCL.

Construction of Transformer Plinth with size 2x2x1.1 meter above ground level and 0.6 mtr below level including the cost of material such as cement brick, ballast, sand etc. complete work and tests as per standard.

Excavation of earth of size 3.1x2.1x0.6 meter

Cement concreting work in ratio 1:4:8

Brick work in 1:4 ratio

RR massonary work 1:6 ratio

RCC work of 1:2:4 ratio 15 cm thickness

Cement Plaster on side walls in 1:4 ratio

Construction of 11/0.4 KV Sub Station floor, toe wll for fencing with size 4x2.5 meter and 0.3 meter below ground level including the cost of material such as cement brick, ballast, sand etc. complete work and tests as per standard.

Excavation of earth of size 2.5x4x0.3 meter

Cement concreting work in ratio 1:4:8

Brick work in 1:4 ratio (as steping 450x225 mm, 225x225 mm for toe wall (2.5 Mx4.0 M)

RCC work of 1:2:4 ratio 15 cm thickness

Cement Plaster on toe walls in 1:4 ratio

Dismentling of the Following Transformer Form Various work Site of Site to safe place on JE Store by Private truck within average lead distance of approx 1 to 40 Km including loading & unloading proper stacking at store complete in all respect.

25 KVA T/F

63 KVA T/F

100 KVA T/F

Mounting of following Capacity Transformer/Plinth/Double Pole Structure with the help of Chain Pulley/Crain Depending upon the nature of Job at work complete in all respect and Energisation of Transformer

63 KVA T/F

100 KVA T/F

250 KVA T/F

Back Cartage of the Following Transformer Form Various work Site of Site to safe place on JE Store by Private truck within average lead distance of approx 1 to 40 Km including loading & unloading proper stacking at store complete in all respect.

25 KVA T/F

63 KVA T/F

100 KVA T/F

Laying and stringing of HT/LT New line on following conductor after hoisting disc-fitting and disc insulators (Supplied by the department) Fixing with all accessories proper sag including binding etc. in all respect including earth wire as per Specification of UPCL.

11 KV Line in ACSR Rabbit Conductor

Earthing of DTR/Metering/Cubical/Neutral/Body/ Lightning with M.S. earthing rod 20×2500 mm for earthing of support as per RESPO drawing No. RES-12 including digging earth rod 2.5 m deep below ground level connected to support with earth wire 7/16 swg fixing of all accessories complete in all respect as per Specification of UPCL.

Chemical Earthing of Distribution Transformer including digging of pit of size 2.5 mtr depth and make hole of size 150 mm. Placing of Earthing Electroded (to be supplied by contractor) connecting the same with G.I Strip (to be supplied by contractor) of Size 35x6 mm for a minimum lengh 6 m treatment of soil with highly condctive substance as per IS 30343 Complete in all respect.

Providing Erection and Fixing of wire mesh fencing of size 50x35 mm around plinth and toe wall duly welded with frame of M.S.Angle iron 35x35x6 mm strip of size 35x6 mm in mid of each side along with wire mesh (width of wire mesh 1.5 meter) with the height of 0.5 meter above the plinth and 2 meter above the toe wall with 1 no gate and locking arrangement in the toe wall size including grouting of 6 no legs in the ratio in block of size 0.25x0.25x0.45 meter including gravlling of shigle of size 20 to 40 mm and complete painting of wire mesh with aluminium paint with two coat (including the cost of cement and all material)

Fixing of HT Fuse Set with all accessories as per specification of UPCL

Fixing of LT Fuse Set with all accessories as per specification of UPCL

Installation of MCCB 150 A with all accessories ar per specification of UPCL

SHIKHAR ENTERPRISES