Upgradation of old WTP Intake Well with replacement of mechanical arrangement under WATCO Section, Karanjia in Mayurbhanj District

Provision of Submersible Pumping (Pond) Machinary With External Electrification at Intake site Karanjia , Under WATCO Subdivision Rairangpur

82.50 KVA DG Sets at Intake Site

Design, engineering, procurement of materials and bought out components, manufacturing, assembly at shop, inspection, testing and painting at manufacturer’s works, packing, supply, unloading /transportation/ handling/storage at site, assembly at site, installation including touch-up painting, hook-up, pre-commissioning, commissioning, inspection and testing of the complete of the following capacity (Prime Power) DG sets along with AMF Panels, Acoustic enclosure, supply of all erection & commissioning spares, special tools and tackles (as required),instrumentation, all Auxiliaries, Exhaust system & silencer, Fuel Tank, Fuel piping , cable of required size , 4 nos earthing for DG set, required foundation, good quality (Make:- Mahindra Power/ Kirloskar/Ashok Leyland/Sterling/Jackson/ Cumin Powers/ Greaves Cotton/ Greaves/TMTL/Captiva/Equivalent make with approval of the authority) , change over,meetering panel, with CT Meter, including RCC Foundation shed for DG set Chamical Earthing 4 nos Aluminium power cable of required length control cable for AMF of required length,trial run with required amountb of Diesel change over commisioning etcall complete etc. with inspection certificate from electrical inspector and as as per site condition & direction of Engineer in charge.

Supply all labour T&P Provision for Cleaning & dewatering of Intakewell and lowering of Submerssible Pumpsets including all complete with testing & commissioning as per direction of EIC. (In slushy soil )

Supplying all labour T&P for Supplying of following 3coreCopper flat cable suitable to run S/S Pumpset etc. all complete.(Make:-Finolex/L&T /Anchor/ Havells /V Guard/Equivalent make with approval of the authority)

6 mm2 3Core flat copper Cable

10 mm2 3Core flat copper Cable

16 mm2 3Core flat copper Cable

Supplying all labour T&P for 3 phase Vertical Submersible Pump Sets with star delta running of following head & discharge all complete as per direction of EIC.without Control Panel

H=42 to 92 m D=300 to 800 Lpm

H=35 m D=1250 Lpm

Providing, erecting and giving test of induction motor conforming to IS /IEC 60034-1 half key balanced suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C.11 KW/15 HP PF:0.78 AMP-22OF 1480 RPM Supply. Motor shall be TEFC type. with suitable foundation bolts grouted in C.C. foundation block including EVEREST BLOWER PUMP ISO:9001-2015 of capacity -685 m3/hour of pressure 0.35 kg/cm2 of speed 1580 RPM . with suitable foundation bolts grouted in C.C.

Induction motor 15 HP with BLOWER 4 NOS

Supplying all labour,consumble, T&P and dewatering of Water using Diesel engine including cost of consumable, hire charges of disel Pump,conveyance to work site ,contractor profit & labour cess as per direction of Engineer-in-charge.(5HP Diesel Pump)

Provision for RCC frame structure Chemical Room all complete as Per direction of EIC.

Provision of Centrifugal Pumping Machinary With External Electrification with DG set & replacement of Filter media at WTP , Karanjia, Under WATCO Subdivision, Rairangpur

125 KVA DG Set at WTP Site

Design, engineering, procurement of materials and bought out components, manufacturing, assembly at shop, inspection, testing and painting at manufacturer’s works, packing, supply, unloading /transportation/ handling/storage at site, assembly at site, installation including touch-up painting, hook-up, pre-commissioning, commissioning, inspection and testing of the complete of the following capacity (Prime Power) DG sets along with AMF Panels, Acoustic enclosure, supply of all erection & commissioning spares, special tools and tackles (as required),instrumentation, all Auxiliaries, Exhaust system & silencer, Fuel Tank, Fuel piping , cable of required size , 4 nos earthing for DG set, required foundation, good quality (Make:- Mahindra Power/ Kirloskar/Ashok Leyland/Sterling/Jackson/ Cumin Powers/ Greaves Cotton/ Greaves/TMTL/Captiva/Equivalent make with approval of the authority) , change over,meetering panel, with CT Meter, including RCC Foundation shed for DG set Chamical Earthing 4 nos Aluminium power cable of required length control cable for AMF of required length,trial run with required amountb of Diesel change over commisioning etcall complete etc. with inspection certificate from electrical inspector and as as per site condition & direction of Engineer in charge.

Supply and installation of Horizontal Splitcase type Centrifugal ( HSCF ) Coupled 40 HP PumpSet to run on three phase A.C. power supply at wide range voltage variation 380 volt-420 volt.having following duty parameters. Having BRONZE IMPELLER (Having Suc- X Del- Nozzle Size : 100 mmX 80mm) Coupled with 1475 RPM, TEFC/NLFP Squirrel Cage Induction Motor, Energy Efficiency:IE2 EFFICIENCY,415 Volt,50Hz+/-5%,3 Phase Mounted on a Common base plate With Coupling Guard Suitable.

Material of Construction of Pump ( MOC): Casing: C.I.; IMPELLER: BRONZE,Shaft: Stainless Steeel; Shaft Sleeve:C.I.

Sealing Arrangement: Mechanical seal Packing.

Scope of Supply : pump,Motor, Base Plate, Coupling & Coupling Guard

Centrifugal Pump With Star Delta Control Pannel with APFC arrangement

Supply of PLC Compactible 75 KW VFD Panel made out of 2mm CR sheet duely powder coated, front and rear opearted, floor mounted complete with rated aluminum busbar and proper termination of all signal for PLC. 30KW VFD- 1 No, 125A MCCB with Auxiliary Contact for PLC , 63A MPCB with R,Y,B indication- 1set, Basic Multifunction mete- 1 Nos, MCB- 7 Nos, Interposing Relay4 CO- 4 Nos , Start, STOP, Reset, Speed Inc, Speed Decrease Push button - 1 Set, EMG PB- 1 Nos, Auto Manual wSitch- 1 No, ON, OFF, Trip LED- 1 Set, Cooling FAN- 1 Nos, Filter- 2 Nos, Power Terminal, Control Terminal as per requiredment, T&P and Labour etc. All Switch Gear and Control Gear Make: Schneider, Siemens, L&T, ABB all completed as per electrical specification & direction of EIC.Supply of PLC Compactible 75 KW VFD Panel made out of 2mm CR sheet duely powder coated, front and rear opearted, floor mounted complete with rated aluminum busbar and proper termination of all signal for PLC. 30KW VFD- 1 No, 125A MCCB with Auxiliary Contact for PLC , 63A MPCB with R,Y,B indication- 1set, Basic Multifunction mete- 1 Nos, MCB- 7 Nos, Interposing Relay4 CO- 4 Nos , Start, STOP, Reset, Speed Inc, Speed Decrease Push button - 1 Set, EMG PB- 1 Nos, Auto Manual wSitch- 1 No, ON, OFF, Trip LED- 1 Set, Cooling FAN- 1 Nos, Filter- 2 Nos, Power Terminal, Control Terminal as per requiredment, T&P and Labour etc. All Switch Gear and Control Gear Make: Schneider, Siemens, L&T, ABB all completed as per electrical specification & direction of EIC.

Supplying all labour T&P for Construction of the RCC framed structure lab room all complete as per direction of EIC .

Replacement of Filter Media

Supply of filter sand screened, washed,cleaned & graded free from clay & other impurities size 0.45mm to 0.70mm packed in HDPE / Polythene bag including stiching with transporation,loading & unloading,stacking at site as per the direction (Cost of flter sand screened, washed, cleaned & graded free from clay & other impurities size 0.45mm to 0.70mm packed in HDPE / Polythene bag)

Supplying all labour, de- watering, removeing the gravel & sand from filter bed and throwing the old sand to outside and stacking filter gravel at site & cleaning the old gravel and separateing into different sizes and cleaning 2 nos filter bed alongwith the lateral pipe of filter bed as per specification and direction of Engineer- in-Charge.

Supply all labour, T&P changing the new filter sand and gravel to the filter bed upto 1.30 mtr hight

Unskilled labour

Installation of Chlorination dosing System with fitting & fixing of online Chlorine Analyser at WTP Karanjia ,WATCO -Subdivision Rairangpur.

Provision for supply testing & commissioning of chemical Booster pump 7m3/hr, H-40 M, 0 to 100m³/Hr in proportion to 4 to 20 mA signal. 100 SPM @ 75 HZ and 67 SPM @ 50 HZ. Motor Frequency Range = 15 to 75 Hz Auto/Manual, Remote, while running or at rest, 5:1 Turn Down Ratio, Over & above there will be provision for manual stroke variation.The Disch piping & fittings starting from the pump flange upto the tank nozzle including VFD 3 Phase input and 415 V 3 Phase output . Inverter will receive a signal of 4 to 20 mA and will vary the RPM of the motor in proportion to the same, thus controlling the pump capacity. Pump will also have the provision for manual stroke adjustment. Connection between the Inverter & pump together with the Instrument for generating 4 to 20 mA signal witheletrical installation etc all complete.

Installation charges including all piping arrangement & hire charges of Hydra etc all complete

Supplying of control panel with VFD for running of the above chlorine dosing pump and motor etc all complete as per direction of Engineer-in-Charge.

Supply of On line Chlorine Analyser with following technical specification

i.e.Single Channel free Chlorine Analyser,Transmitter-Aqua4trans DualChannel,FRC sensor FMNSX5 with 10 feet cable(with manual PH compensetion),Complete system pre mounted on plate with FTCs foe sensors,Power supply110-240VAC,Trans 2" pipe/wall /Panel mount type,RangeFRC-0-5 ppm,Complete plate mounted system,(The Analyzer must be pre wired on plate,we will provide only power supply & pipe connection system)(ABB/E&H/Forbes Marshall/Equivalent make with approval of the authority)

Supply and Installation of Flow Meter level indicator with construction of the Sluice valve chamber at 1.00MLD WTP Karanjia Under WATCO Subdivision-, Rairangpur.

Installation of Bulk Water Meter system

Supply of electric powered electromagnetic full bore type IP 68 Fully welded Flanged type water flow meter of Pulse DC type of Flow tube SS304,coilhousing & electrodes SS316,SS RING TYPE grounding etc with IP 68 signal coverter remote mounting,input power supply 24V DC 4 - 20 mA,programable LCD display to show Actual flow rate,totalised flow, flow direction, flow velocity,conductivity with + or - 0.5% accuracy etc & provision to diagnostics empty pipe detection, coil tempreture, coil resitance etc & comptable to data communication modules with masibus & communicaton the data to remote SCADA station for live monitoning where ever required including providing data cable & power cable required as per site condition. The standard callbratation certificate & guaantee certificate for flow meter & electromagnetic signal coverter to be given for minumum one year from the date of installation. (Make- KROHNE MARSHALL/E&H/ABB/SIEMENS/Equivalent make with approval of authority) including cost material with all taxes transportation to Site/Storage with insurance.). All complete as per direction of Engineer in charge.

150mm dia Full bore type Electro Magnetic Water Flow meter

200mm dia Full bore type Electro Magnetic Water Flow meter

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately

Supplying all materials, labour, tools & plants for cutting of mettaled road for laying of pipeline including conveyance of all material at work, etc. all complete as per specification and direction of the

Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge.

Supplying all materials, labour, and T&P for providing mechanical joints to flange socket as per relevant IS with suitable flanged joints and fitting & fixing of following in pipe as per specifications including testing with cost of all jointing materials, transportation to site etc. all complete as per the specifications and directions of Engineer-in-charge.

150mm dia MJ Socket

200mm dia MJ Socket

Dismantle joint

150 mm dia

200 mm dia

Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.

114.30mm OD M.S.Pipe 4.50 mm thick

168.30mm OD M.S.Pipe 4.50 mm thick

219.10mm OD M.S.Pipe 6.30 mm thick

Supplying M.S.flange of following thick suitable for following dia of M.S./C.I pipes specials,valves with wastage including cost of materials, labour, T & P etc all complete.

100mm M.S. Flange.(10mm thick)

150mm dia M.S. Flange.(12mm thick)

200mm dia M.S. Flange.(12mm thick)

Supplying all labour and T&P for cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete

For Installation of Flow meter

Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld) to MS pipes upto 8mm thick and fittings at site by using welding generator including testing of joints, as per specification complete

For Installation of Flow meter

Supplying all materials, labour and T&P for making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification and direction of E.I.C.

100mm dia

150mm dia

200mm dia -

Cutting of C.I /DI pipe by eletric arc welding,at site including cost of materials,labour,T & P etc all complete

Supplying all materials, labour T&P for construction of Fly ash brick masonary Valve chamber of following internal sizes having earth work in excavation in all kinds of soil, 150mm sand filling ,150mm PCC (1:3:6), 200mm thick base, wall & cover slab with RCC 1:1½:3, foot step iron etc all complete.

(0.90m.x0.90mx 1.00mtr ) including RCC Cover Slab

(1.20m.x0.90mx 0.90mtr ) including RCC Cover Slab

Supply of Pressure transducer to be installed with following technical specification i.e Range up to 10 Kg/cm2 , Type -Sensor ,power Supply-24 DC , Out put-4 to 2 mA , (Make-E & H/ABB/VEGA/WIKA/Equivalent make with approval of authority) with SS 316 grade sensor niddle valve with bypass tube

Supply, Installation, testing , programming & Commissioning of PLC consol panel for filter bed etc all completed as per electrical specification and as per direction of EIC.

Supply, Installation, testing , programming & Commissioning of filter bed pipe gallery MOV (motor operated valve ) with actuator etc all completed as per electrical specification and as per direction of EIC.

Supply, Installation ,testing & commissioning of WATER Quality Montier for Residual Chlorine in Distribution Network, the Input Power Supply should be internal battery (2 of LSH 20 3.6V High Discharge Lithium Battery with Communication and Data Logging through GPRS Modem, Website, RS232 link to PC,RS232 link to Bluetooth dongle to mobile Device ,Storage of up to 55000 data points in the device and having Electrical Connections 1X 9Way Fischer Socket Yellow (102)Style for RS 232/Bluetooth dongle, 1X 5Way Fischer Socket (103)Style for Chlorine Sensor, 1X 9Way Fischer Socket red (102)Style for External Device, 1X 7Way Fischer Socket Grey (102)Style for External Device having Environmental protection 1P68 to 1m is designed to fit within Standard Hydrant Chamber with Minimum of 300mm between the Hydrant outlet to the underside of the Chamber lid-150mm(w) x 164mm(h) Weight including laying of connecting uPVC pipe Sch-80 & power supply arrangements etc. complete as per requirement & direction of Engineer in Charge. (ABB/E&H/Forbes Marshall/Equivalent make with approval of the authority)

Supply & installation testing with technical specification-pH Sensor (DPC1R1A) Accuracy: Less than 0.1 pH under reference conditions Body Material: PPS,Electrode Material: General Purpose Glass pH Electrode,Flow: 0 2 m/s (0 - 6.6 ft./s); non-abrasive Operating temperature range: 0 - 105 °C,Pressure Range: 0 - 6.9 bar at 100ºC (0 - 100 psig at 212ºF)Range: Combination pH Sensors 0 - 14 pH,Sensor Cable: Integral coaxial cable (plus two conductors for temperature compensator option); 4.5 m (15 ft.) long Sensor Thread: 0.75",Temperature Compensation: Pt 1000 ohm RTD Includes: sensor with 15 ft cable, digital gateway, 3 ft digital extension cable and manual(ABB/E&H/Forbes Marshall/Equivalent make with approval of the authority)

Supply & installation testing with technical specificaton , Turbidity analyser (TU5300sc) Accuracy: ±2% or 0.01 NTU from 0 - 40 NTU ±10% of reading from 40 - 1000 NTU based on Formazin primary standard Calibration Method: For Formazin and Stablcal: 20 NTU from 0 to 40 NTU; at 20 FNU and 600 NTU for full range Certifications: CE compliant Dimensions (H x W x D): 249 mm x 268 mm x 190 mm Enclosure Rating: Electronic compartment IP55; all other functional units IP65 with process head/ACM attached to the TU5300sc/TU5400sc instrument Instrument: With Automatic Cleaning Module Light source: Class 2 laser product, with embedded 650 nm (EPA 0.43 mW) or Class 1 laser product, with embedded 850 nm (ISO), max. 0.55 mW (complies with IEC/EN 60825-1 and to 21 CFR 1040.10 in accordance with Laser Notice No. 50),Lower Limit of Detection (LOD): 0.002 NTU,Operating Humidity: Relative humidity: 5 - 95% at different temperatures, non-condensing, Operating temperature range: 0 - 50 °C, Range: EPA: 0 - 700 NTU / FNU / TE/F / FTU,0 - 175 EBC, Repeatability: Better than 1% of reading or ±0.002 NTU on Formazin at 25 °C (77 °F), whichever is greater Resolution: 0.0001 NTU / FNU / TE/F / FTU / EBC Response time: T90 <45 seconds at 100 mL/min Sample Flow Rate: 100 - 1000 mL/min; optimal flow rate: 200 - 500 mL/min Sample Pressure: 6 bar maximum, compared to air at sample temperature range from 2 - 40 °C Sample Temperature: 2 - 60 °C, Stray Light: <10 mNTU (ABB/E&H/Forbes Marshall/Equivalent make with approval of the authority)

Supply, installation of chemical earthing with crystalline conducting material for Back Fill Compound & installation of Maintenance Free Earthing Electrode with ISI mark G.I. Pipe dia 50mm as Secondary electrode with wall thickness of 2.6mm and the primary earthing electrode will be 25mm x 6mm hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the primary earthing & the secondary earthing. A solid G.I. Base plate of 300 x 300 mm seals the unit at the bottom. Ground filling compound will be provided in 25kg per bag - 2nos. Excavation of earth pit refilling, Precast RCC chamber with lid etc. all complete as per the site requirement.

Supply of Level indicator to be installed at clear water reservoir etc with following specification Range= 0 to 8 mtr Type =Radar Power Supply=24V DC Out Put=4-20mA (Make- Vega/Forbes Marshall/ABB/E&H/Equivalent make with approval of the authority)

Provision of FRP Dosing tank, type-cylindrical verticaltype, standard size, flat bottomend, 1000Ltr capacity, Qty-1NOS Raw water + Treated water tank, make-Storewell cylindrical type capacity-200Ltr each, Qty-2NOS, Application for Turbidity sensor. Dosing pump-2 number, emec make, electronic type servo motor controlled model DDC 15-4 AR-PPNIC-F-31/002FG, MOC-PP, Flow Rate-15 LPH, Discharge pressure 2 Kglem2, Motor-230V, Single phase, Qty-1NOS, BNA communication cable with PLC and STD. accessories' with Pump .Flanges & fittings transportation, installation and commissioning Five year service (PAC + Bleaching)

Supplying all materials,labour,T&P for fixing,testing & commissioning of Chemical dosing motor with agitator with 2 HP capacity each along with all necessary piping arrangements, all complete Electrical job such as main LT Panel along with starter panel, cabling job,earthing job in all respect as per approved technical specifications,scope of work and direction of Engineer-in-Charge.

Supplying all labour T&P materials for fitting & Fxing of pressure meter Non comtact dipharma type with snubber, pipeing & needle valve at ESR as well as diferent lane & sub-lane to know the water pressure including the cost of pressre meter with drilling holes in pipe line & making good to the damages at including cost all labours T&P etc all complete as per the direction of Engieer-in-charges. 0 to 6kg/sqm pressure meter.

Construction of Compound wall & RCC drain at 1.0 MLD WTP

Single under reamed pile foundation with RCC (1:1.5:3) using 12 mm bhg CB chipse including cost of boring and excluding cost of M.S/Tor steel and labour charges for cutting, bending and binding of steel. Etc complete and as per direction of EIC.

250 mm dia and 2.5 mtr long single under reamed pile

Earth work in all kinds of soil in excavation of foundation treanches within 50mtr initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30 in depth as per direction of Engineer-in-charge.

Initial lift upto 1.50m

Supplying all materials, labour T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to worksite payment of royalty, taxes etc. all complete as per direction of Engineer-in-charge.

Suplying all materials, labour, T & P and providing C.C.( 1:3:6) using 40mm h.g. metal including holsting, laying, watering, curing, conveyance of all materials to worksite, curing, conveyance of all materials to worksite, payment of royalty taxes etc all complete as per specification and direction of Engineer-in-Charge

Drain

Supplying all materials, labour, T&P and providing brick work with F.A bricks having c.s. not less than 75kg/cm2 with dimensional tolerance ± 2% including watering curing conveyance of all materials to worksite, payment of royalty, taxes ect.all complete as per specification and direction of Engineer-in-Charge.

In Super Structure (1:6)

Supplying all materials, labour, T&P and providing 2.5 cm thick Damp proof course with (1:2:4) using 12mm size bhg CB chipse including curing etc. all complete as per specification and direction of Engineer-in-Charge

Suplying all materials, labour, T & P and providing R.C.C. works(1:1.5:3) using 12mm h.g. chlps including holsting, laying, watering, curing, conveyance of all materials to worksite, curing, conveyance of all materials to worksite, payment of royalty taxes etc all complete as per specification and direction of Engineer-in-Charge,

Compound wall

Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. works including cutting, bending, binding and tuing the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance as per specification and direction of Engineer-in-Charge.

Supplying all materials, labour, T&P and providing rigid & smooth centering & shuttering for R.C.C.works including false work and dismantling them after casting including conveyance of all material, to worksite, payment of royalty, taxes etc. all complete as per specification and direction of Engineer-in-Charge.

Foundation & Plinth

Column

G.Beam

Drain wall

Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering curing, conveyance of all materials to worksite, payment of royalty taxes etc. all complete as per specification and direction of Engineer-in-Charge.

12 mm thick C.P in (1:6)

12 mm thick C.P in (1:3) with punning

Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of Engineer-in-Charge

Supplying all materials, labour, T&P and providing and fixing M.S. Grill gate with M.S. framed over all size including frame 1830 mm height X 910mm width made out of the following materials confirming to relavent I.S. specification, Hinges size: 100 mm - 6 Nos including conveyance of all materials to worksite, payment spacification and direction of Engineer-in-Charge.

Supplying all materials, labour, T&P and providing and painting two coats with enamel paint over a coat of primer to iron works etc. complete as per direction of Engineer-in-Charge.

Supplying all materials, labour T&P and priming 1 coat with any approaved primer including cost of primer & labour etc. all complete as per specification and drication of Engineer-in-Charge.

Supplying all labour T&P, materials and finishing wall with weather paint of approve shade on new work two coats to give an even shade including cost of brushes and putty with cost of paint and direction of Enginner-in-Charge.

Provision for Shifting & Installation of 200 KVA Transformer including Construction of RCC base Sturectue etc all complete.at WTP Site under WATCO Subdivision Rairangpur.

WPB (GI) Pole 160x152mm 11mtr Long (30.4kg/mtr) (SAIL/JINDAL/ TATA make)

11KV V cross arm (10.2 K.g. each )

BACK CLAMP GIF/11KV V CROSS ARM

Top bracket 100x50x6 mm GI channel (2kg)

99 SQ.MM. AAAC XLPE Covered Conductor

PG Clamp for 100 sq.mm AAA conductor

11KV Pin Insulator polymer

H W fitting(B&S) 70KN, 3Bolt

Disc insulator (B&S) 70 KN polymer

Earthing of Support ( Coil Type )

Top Channel 100X50X6mm, 9.56 KG/Mtr

Double Pole Belting Channel 75x40x4.8mm

50x50x6mm. GI Bracing Angle, 4.5Kg./mtr.,

Fish Plate 50x6 mm., 2.36 kg/Mtr., each

Danger Plate, 2 no's.

Back Clamp for danger Plate 25X3 mm. fla

H.T. Stay set (Complete )

H.T. Stay Insulator Type-C (2 No's.)

H.T. Stay clamp, 50x8 mm. flat, 3.14Kg/M

7/10 SWG Stay Wire 15kg /stay

GI barbed wire anticlimbing device 3 Kg.

Back Clamp for anticlimbing device 25X3

GI Nut , Bolt & Washer of different size

Black Paint

Yellow Colour Paint for Background

Erection Charges of all items except sl.No.114

Erection Charges of Sl. No. 114

Fixing of complete 11KV line Complete st

Concreting ratio 1:1.5:3 (500mmX500mmX18

Couping ration 1:1,5:3 with dimension (50

WPB (GI) Pole 160x152mm 11mtr Long (30.4kg/mtr) (SAIL/JINDAL/ TATA make)

Top Channel GI 100 X 50 X 6 MM (3000 mm

Fish Plate 50x6 mm., 2.36 kg/Mtr., each

M.U Channel GI 75x40x4.8 mm (3000 mm lon

Cantilever Support Angle 50 X 50 X 6MM G

50x6mm GI Flat for earthing, 2.36kg/mtr.

200 KVA, 11/0.4 KV (AL) Transformer BIS Energy level-II

LT Distribution Box with MCCB, Aluminum Busbar for 3 Bay with kit kat fuse for 200 KVA S/S

99 SQ.MM. AAAC XLPE Covered Conductor

3.5 Cx 300mm2 LT PVC Cable (Armoured)

AB Switch(11KV,400A.3Pole,50 Hz)

H.G. Fuse( 11KV.400A.3Pole) with PI

PG Clamp for 55 sq.mm AAA conductor

Lightning Arrester (12KV,10KA) (Station C)

11KV Pin Insulator polymer

HT stay set complete

HT Stay Clamp (1.9Kg/pair)

HT stay Insulator TYPE-C

7/10 SWG GI stay wire, Grade -2 (15kg./

40 mm Nominal bore GI pipe (medium gauge

GI Nuts & Bolts of Assorted size (25 Kg/

GI barbed wire anticlimbing device (3Kg

Back Clamp for anticlimbing device 25X3

Danger plate 11kv

Back Clamp for danger Plate 25X3 mm. fla

Name plate

Yellow Colour Paint for Background

Black Colour Paint for numbering

Erection Charges except Item No.144 & 150

Erection Charges of Item No.144 & 150

Concreting ratio 1:1.5:3 (500mmX500mmX15

Fixing of stay set with 0.5Cum cement c

Construction Earthing chamber including

Laying of 3.5 Cx 300 mm2 LT PVC Cable

Plinth for DTR

Supply and Erection of GI Fencing with G

3.5 C x 185mm2 LT PVC Cable (From Sub-Station to Main Panel) (Double Circuit)

Erection Charges

Electrical inspection fees

Provision for Supplying & Installation of 3 tone Capacity crane etc all complete.at Karanjia WTP Site under WATCO Subdivision Rairangpur.(For WTP & Intake well)

Supplying of MS structure including all taxes & transportation etc complete.

Supplying all labour, T&P and providing painting 2 coats with synthetic enamel coat of approved shade including one coat primer to inside and outside etc. All complete as per specification and direction of E.I.C

Supervision charges for installation of electrically Operated (3 way) single girder EOT crane.

Yard Lighting and Approch Road Lighting at Intake well & WTP Site ,Karanjia.

Supplying all labour and T & P etc. and earthwork in excavation for foundation trenches in all kinds of soil within initial lead and lift including rough dressing and breaking clods to maximum 5 to 7 cm. in size etc. and laying in layers not exceeding 30 cm. in depth and as directed by the Engineer-in-charge, all complete.

Construction of foundation with supply of all material such as steel, reinforcement, metal chips, cement, sand, cable entry, shuttering for RCC work (1:1.5:3) with labour charges for construction including erection and commissiong of pole with arm to proper alignment including fitting of the lamp.

Supply fitting fixing & errection of Hot dip octagonal smart pole for mounting and installation of the LED street light Luminaries as per following technical specifications - (i) Height - 6.00 mtr (ii) Top dis - 70 mm (iii) Bottom dia -130mm (iv) Sheet thichness - 3 mm (v) Base plate dimension - 200 mm x 200mm x 12mm with required bolt & fittings

Supplying fitting & fixing of Single arm Bracket of 1.0 mtr length suitable for fixing in 70mm top yard lighting octagonal smart pole

Supply, delivery and laying of 40mm HDPE pipe inside ground and cable inside the HDPE pipe as per construction standard specification.

S/F 2.5 sq.mm 3 Core, round Cu cable for wiring from junction box to light fitting including the labour charges towards connection make-finolex/ Polycab/ havells

S/F of 1 x 70 W LED street light made up of pressure die cast aluminium housing with toughned glassindividual high powered LEDs with secondary optics, IP66 protection impact resistance of IK 07 (Endura OMNI Plus) with connection as per the direction of Engineer-in-Charge.

Construction of Approach Road at WTP Site

Supplying all materials, labour, T&P and filling of road surface with borrow earth (1.0 mtr.) from the approved quarry and compacting to the required density with testing including cost of royalty, lead & transportation & labour cess etc all complete as per the direction of Engineer-in-charge.

Supplying all materials, labour T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to worksite payment of royalty, taxes etc. all complete as per direction of Engineer-in-charge.

P.C.C.(1:3:6) in foundation & plith using 40 mm size b.h.g.c.b metal including mixing of materials and laying in well prepared surface & compacting, watering curing with cost, conveyance, royalities of all materials, T&P and Labour charges etc. complete in all respecte as per Scope & Technical Specification & direction of Engineer-in-Charge.

R.C.C. (1:1.5:3)Grade using 20mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers compacting by vibrator with proper cambering and filling berm by excavated earth and all leads and lifts including frame works etc. complete

Rigid & smooth centering & shuttering for R.C.C. works including false work & dismantling them after casting including cost of materials, etc. complete in all respecte as per Scope & Technical Specification given at Section 8 & 9 of DTCN & direction of Engineer-in-Charge. (RCC Foundation)

Providing skin reinforcement for road work using HYSD reinforcement including bending, binding & placing in position as per Drawing including cost, conveyance of all materials, all labour and T&P, etc. complete in all respecte as per Scope & Technical Specification given at Section 8 & 9 of DTCN & direction of Engineer-in-Charge. [8mm tor @ 300 mm x 300 mm]

Improvement of water supply with laying of pipe line in uncovered areas under Karanjia NAC,Mayurbhanj.

Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge.

Supplying of materials, labour and T&P for excavation of foundation in laterite rock or any hard rock(other than granite or disintegrated rock)removed by chiselling including dressing and leveling the bed not exceeding 1.5mtr depth and depositing the soil within 50mtr initial lead as per specification approved by the Deptt.as per direction of Engineer-in-charge.

Cutting asphalt or bituminous road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately

Supplying all, labour, tools and plants for dismantling the existing paver block flooring on road and removing the sand base course for laying of pipe line/ fixing of valves/flow meters etc and relaying the paver blocks again in position inlcuding preaparing the base course with sand well watterred and rammed with strong vibraatory compaction of approved size design and shape compacted bed of sand etc complete coarse sand , filling the joints with the sand etc all complete as directed by Engineer in charge, cost exclusive of paver blocks.

Providing and laying of 80mm thick factory made cement concrete interlocking paver block of M 35 grade and approved make varoety colour and size made by block making machine block making machine with strong vibraatory compaction of approved size design and shape laid in required colour and pattern over and including 50mm thick compacted bed of sand etc complete coarse sand , filling the joints with the sand etc all complete including cost conveyance, royalties and taxes of all materials and cost of all labour, etc. complete as directed by Engineer in charge.

Relaying dismantaled pavor block

Laying new Pavor block

Supply & Laying in trenches Centrifugally cast (SPUN) DUCTILE IRON Pressure Socket & spigot pipe of Class - K7 or K9 without cement mortar lining conforming to I.S. 8329 of the following nominal diameter as per specification, complete for push on rubber gasket jointing.., as per the specification, all complete as per direction of engineer-in-charge ( Earth work in trenches jointing of pipes specials and fitting to be meausred separately)

150 mm Pipe line K7

100 mm Pipe line K7

Supply all materials, labour and T&P for Providing Push-on-joints confirming to IS:3114 to centrifugally (Spun) Cast Iron Pipes or Ductile Iron pipes using rubber gasket conforming to IS:5382 of Styrene Butadene Rubber (S.B.R) quality , testing of joints,etc. all complete as per specification and direction of Engineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work.(Excluding cost of rubber gasket)

150 mm Pipe line

100 mm Pipe line

Laying in trenches C.I./D.I & specials conforming to conforming to relevant IS specification of the following diameter as per P.H. specifications including carriage of materials from store to work site etc complete.(excluding earth work in excavation,jointing and cost of specials)

Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410/ GI Pipe (Medium ) confirming to specification of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.

MS Pipe

150mm dia M.S.Pipe (5.40 mm thick)

100mm dia M.S.Pipe (4.50 mm thick)

150mm dia M.S flange 12mm thick

100mm dia M.S flange 10mm thick

150mm dia x 45° M.S. Bend

100mm dia x 45° M.S. Bend

150mm dia x 90° M.S. Bend

100mm dia x90° M.S. Bend

Cutting of C.I /DI pipe by eletric arc welding, at site including cost of materials,labour,T & P etc all complete

Supplying all labour and T&P for cutting MS pipe 8.00 mm thick following dia MS pipe in treanches by gas cutter set of pocket etc all complete

Supplying all labour and T&P for jointing following dia MS pipe in treanches by electric arc welding & genetator set of pocket etc all complete

Supplying all materials, labour, and T&P for providing mechanical joints to flange socket as per relevant IS with suitable flanged joints and fitting & fixing of following in pipe as per specifications including testing with cost of all jointing materials, transportation to site etc. all complete as per the specifications and directions of Engineer-in-charge.

150mm dia MJ Socketed Tail Piece -

100mm dia MJ Socketed Tail Piece -

Supplying all materials Labour & T & P for Fixing Ductile Iron Resilient seated Sluice Valve / NR Valve/ B.F valve with double flanged ends for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Sluice valve/ B.F valve etc . (Make:VAG/ Talis/ AVK/IVC/ Kirloskar/Hawle/Equivalent make with approval of the authority)

150mm dia DI Resilient Seated Glandless Sluice Valve with double flanged ends (PN1.6)

100mm dia DI Resilient Seated Glandless Sluice Valve with double flanged ends (PN1.6)

150 mm dia NRV

100 mm dia NRV

Supplying all materials Labour & T & P for Fixing of Tamper proof Air Valve for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Air valve .(Make:VAG/ Talis/ AVK/IVC/ Kirloskar/Hawle/Equivalent make with approval of the authority)

25 mm dia Tamper proof Air Valve

Supplying all materials, labour and T&P for making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification and direction of E.I.C.

150 mm Flanged joints

100 mm Flnged Joints

Supplying all materials , Labour & T & P for Repair of House connection ferrule point including concrete cutting ,earth work excavation,dewatering , drilling water main, providing Saddle with ferrule ,MDPE Pipe with compresion fittings & replacement of service pipe of 20mm /25mm up to 0.30 mtr with fixing of a Brass MTA/ FTA / uPVC Socket etc. complete to make the connection leak proof .

Supplying all materials, labour T&P for providing house connection to beneificiaries from PHD Dept./watco CI/DI property of the beneificiaries including earth work excavation, concrete cutting,/Metal/BT Road ,refilling the trenches & making good to the damages road with CC(1:2:4) after completion of the work, lifting excess excavated materials/ debrises from work site & disposed within 5 km radius by mechanical transport fixing 1/8" dia brass / GM ferrule with following dia composite strap saddle in the CI/DI pipe line cutting holes in brick/ stone/ RCC masonary work repair the broken holes cost of upvc Schdule -80 pipe (25mm/20mm dia up to 7.0mtr / 10mtr respectively)& fittings 1 No of PVC Tap of approved make etc. complete as per technical &PH specification and direction of EIC.

House Service Connection

Supplying all labour, T&P materials etc. and the construction of brick masonry sluice valve chamber of over all of following internal ; earth work in excavation in all kinds of soil; laying of 150mm thick CC (1:3:6) with crusher broken hard granite metal up to 4 cm size metal; 250mm thick brick masonry workin C.M (1:4) with fly ash bricks having crushing strength betgween 75 Kg/cmsq. 12mm thick cement plastering with CM(1:3) with punning for inside surfaces & out side plastering above GL & cement pointing below GL etc. all complete including precast Factory made Heavy duty RCC cover slab with Frame ( SD-20) made out of M30 concrete to with stand against 20 MT vehicular load as per the approved drawing if any and the direction of Engineer-in-charge.

[0.90mx0.90mx1.00 m] for 150mm. to 100mm. dia. S/V.

Supplying filling in foundation & plinth with sand well watered & rammed including cost, conveyance, royalties, taxes all labour, T & P etc all complete as per specification and direction of Engineer-in-charge.

Supplying all labour , T&P and removing surplus earth by mechanical means within 5 K.M radious etc all complete and only to be dumped/ disposed off at designated site as per direction of Engineer in charge.

Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour ,materials with all taxes, lead ,T & P etc all complete .

Cement concrete (1:2:4) with 12cm. Size crusher broken hard Granite chips including cost of all labour ,materials with all taxes, lead ,T & P etc all complete .

Supplying all materials T&P for filling the Excavated earth all complete as per direction of EIC.

Please Enable Macros to View BoQ information