PWD/SE/KEC/NIT11/19-20

Amount

Supply, installation, testing and commissioning of 10 passenger elevator/lift, with V3F control panel with the following (make: OTIS/Schindler/KONE) (i) Capacity:- 680 kg (10 passengers) (ii) Travel:- 21.6 mtr approx (iii) Speed:- mps:- 1.5 (iv) Stops & Openings:- 6 stops 6 openings (all on same side), (G+5) (v) Power supply:- 415 volts, 3 phase, 50 Hz., Alternating Current, Variation as per I.S. (vi) Control:- Microprocessor based AC with V3F control (with close loop). (vii) Operation:- Simplex full collective (with Auto / attendant mode) (viii) Machine:- Energy efficient machine unit suitable for 10 passenger lift without gear and without M/C room (machine room less operation) (ix) Clear shaft dimension (Available):- 2000mm x 1900 mm. (x) Pit Depth:- 1600 mm (existing) (xi)Car enclosure & False ceiling:- Stainless Steel hairline finish. (xii) Indicator:- Up & Down indication arrows with standard digital display car, floor position and call registration LED indicator (xiii) Car inside area:- 2200 mm height and area as per IS code for 10 passanger. (xiv) Car door:- SS centre opening automatic door provided without vision panel with V3F controlled door drive system. Doors should be minimum 1 hr fire rated. (xv) Landing doors:- SS hairline finish centre opening automatic door provided without vision panel with V3F controlled door drive system. (xvi) Clear door opening:- Minimum 700 mm x 2000 mm height (xvii) Door detector systems:- Full length photocell assembly light curtain sensor. (xviii) Overload protection:- On overloading the lift car will not start with door remaining open and audio & display indication. (xviv) Emergency light & alarm:- Rechargeable battery operated alarm bell and emergency light. (xx) Leveling accuracy:- ± 5 mm. (xxi) Automatic rescue device:- Battery operated ARD for automatic evacuation to the nearest floor in case of power failure / single phasing. (xxii) Belt:- as per manufacturer's standard. (xxiii) Car fan:- Lift car provided with fan with provision of getting automatic switched off in case of having no call. (xxiv) Car flooring:- Decorative granite flooring of approved colour (in lift company's scope). (xxv) Fire Man’s switch:- To be provided at ground floor landing/lobby. (xxvi) Home landing:- Car will automatically come to the preset home landing when there is no call. (xxvii) COP & LOP:- 1 no. COP (with start / Floor button) and 6 nos. LOP suitable for (G+5) floors with luminious push up / down, call registration indicator, digital position indicator, SS face plate etc. (xxviii) Voice Anounciator:- Automatic floor position announcement system. (xxix) Intercommunication System:- 2 way intercom system to be provided. (xxx) Buttons on car and landing should be braille encoded.

Supply, installation, testing and commissioning of 6 passenger elevator/lift, with V3F control panel with the following (make: OTIS/Schindler/KONE) (i) Capacity:- 408 kg (6 passengers) (ii) Travel:- 18 mtr approx (iii) Speed:- mps:- 1.5 (iv) Stops & Openings:- 6 stops 6 openings (all on same side), (G+5) (v) Power supply:- 415 volts, 3 phase, 50 Hz., Alternating Current, Variation as per I.S. (vi) Control:- Microprocessor based AC with V3F control (with close loop). (vii) Operation:- Simplex full collective (with Auto / attendant mode) (viii) Machine:- Energy efficient machine unit suitable for 6 passenger lift without gear and without M/C room (machine room less operation) (ix) Clear shaft dimension (Available):- 1985 mm x 1865 mm. (x) Pit Depth:- 1600 mm (existing) (xi)Car enclosure & False ceiling:- Stainless Steel hairline finish. (xii) Indicator:- Up & Down indication arrows with standard digital display car, floor position and call registration LED indicator (xiii) Car inside area:- 2200 mm height and area as per IS code for 6 passanger. (xiv) Car door:- SS centre opening automatic door provided without vision panel with V3F controlled door drive system. Doors should be minimum 1 hr fire rated. (xv) Landing doors:- SS hairline finish centre opening automatic door provided without vision panel with V3F controlled door drive system. (xvi) Clear door opening:- Minimum 700 mm x 2000 mm height (xvii) Door detector systems:- Full length photocell assembly light curtain sensor. (xviii) Overload protection:- On overloading the lift car will not start with door remaining open and audio & display indication. (xviv) Emergency light & alarm:- Rechargeable battery operated alarm bell and emergency light. (xx) Leveling accuracy:- ± 5 mm. (xxi) Automatic rescue device:- Battery operated ARD for automatic evacuation to the nearest floor in case of power failure / single phasing. (xxii) Belt:- as per manufacturer's standard. (xxiii) Car fan:- Lift car provided with fan with provision of getting automatic switched off in case of having no call. (xxiv) Car flooring:- Decorative granite flooring of approved colour (in lift company's scope). (xxv) Fire Man’s switch:- To be provided at ground floor landing/lobby. (xxvi) Home landing:- Car will automatically come to the preset home landing when there is no call. (xxvii) COP & LOP:- 1 no. COP (with start / Floor button) and 6 nos. LOP suitable for (G+5) floors with luminious push up / down, call registration indicator, digital position indicator, SS face plate etc. (xxviii) Voice Anounciator:- Automatic floor position announcement system. (xxix) Intercommunication System:- 2 way intercom system to be provided. (xxx) Buttons on car and landing should be braille encoded. N.B. (i) Rates should be quoted inclusive of minor civil works, wall / floor cutting, for making holes, chiseling etc. and mending good the damages to the original finish. (ii) Bidders are requested to visit the site before prebid meeting/quoting rate.

Otis Elevator Company(India)Limited