Tender 87/2022

Room No 04 (PAO Room)

Supplying and fixing work stations of suitable sizes made of 17mm thick both side prelaminated exterior grade HDF boards table top supported on 60mm thick partitions made of 2 numbers 7.5mm thick both side prelaminated HDF boards fixed on exterior grade marine ply wood frames 45mmx 45mm allround and vertical supports at spacing not exceeding 60cm centre to centre or 17mm thick both sides prelaminated HDF boards where ever required as shown in the drawing.

Work station of 1800mmx 2200mm size as shown in the drawing with the following components .

Table top with 17mm thick HDF both side prelaminated exterior grade board .

Box type partions of 60mm thick ,750mm height made of 7.5mm thick HDF both side prelaminated exterior grade board fixed on both side of exterior grade marine ply wood frame 45mmx45mm size.

17mm thick HDF Both side prelaminated exterior grade board verticals for table top support.

Keyboard with 17mm thick HDF both side prelaminated exterior grade board ,sliding type 800mm x 400mm size with necessary fittings such as sliders , side supports etc. complete.

Two sets of 'Drawers 450mmx600mm made of 17mm thick HDF bothside prelaminated exterior grade board fixed with three numbers horizontal shelves. Drawers fixed with stainless steel telescopic sliders fixed on both sides. Inner three sides are 160mm high and face cover to cover outer vertical supports and bottom and top shelf thickness including fixing 100mm stainless steel handle and 40mm chromium plated brass cupboard lock of approved make and brand.

Two sets of electrical fittings of approved make and quality consisting of four number switches and four number sockets fixed on 14"x4"(35mmx100mm) PVC box type switch board of GM or equivalent quality or Legrand mylink modular type including wiring with polycab 1.5 sqmm cables, three numbers telephone sockets and wiring with two pair telephone cables, and wiring with CAT 6 cables for net connection ,all laid in 20mm dia PVC conduits inside partitions.

All visible edges of boards and partitions shall be fixed with 3mm thick PVC edge bands of suitable width having same shade and colour of partition / table top.

Providing and laying polycab 1.5sq.mm cables from work station to main switch board including covering the cable with PVC capping of suitable colour.

Providing and laying polycab 3sq.mm cables from power socket to main switch board including covering the cable with PVC capping of suitable colour

Providing and fixing 15A power plug socket , switch with suitable PVC box type switch board of GM or equivalent quality or Legrand mylink modular type including wiring with 3sqmm cables and connecting to the existing nearest power supply point.

Providing and laying suitable CAT6 cable from the work station to the existing cable connection including covering with PVC capping of suitable colour.

Providing and fixing 60mm thick partions made of two numbers 7.5mm thick both side prelaminated HDF boards fixed on marine plywood exterior grade 40mmx45mm frame work alround and vertical supports at spacing not exceeding 600mm and horizontal supports at spacing not exceeding 900mm including fixing with steel clamps to floors,walls,ceiling where ever necessary and as directed by the Officer in charge. Size 3500mmx2100mm with opening 700mmx2100mm for door. 3.5m length 2.100 m height

35mm thick flush door sliding type shutter made of 7.5mm thick bothside prelaminated exterior grade HDF board fixed on both sides of mahagony or equivalent wooden frame 20mmx45mm size frame work with horizontal and vertical at 600mm centre to centre including fixing with approved quality stainless steel fitting such as 4 nos 100mm hinges 2 nos 100mm handle and hydraulic door closure of approved quality etc. ( size :700mmx2100mm)

Wall painting with premium acrylic emulsion paint of interior grade having VOC content less than 50 g/ l of approved brand and manufacture, including applying additional coat whereever required to achieve an even shade and colour including removing the existing painting by scrubbing and cleaning the surface and finishing the wall with a coat of interior putty and apply priming coat as required as directed by officer incharge including making the wall surface level by chipping the plaster and applying restorator ( polymer reinforced structural repair mortar ) of approved make like ZUPA or equivalant where ever required. (Room size 4600mmx3500mm -walls and ceiling).

Wall painting with premium acrylic emulsion paint of interior grade having VOC content less than 50 g/ l of approved brand and manufacture, including applying additional coat whereever required to achieve an even shade and colour including removing the existing painting by scrubbing and cleaning the surface and finishing the wall with a coat of interior putty and apply priming coat as required as directed by officer incharge including making the wall surface level by chipping the plaster and applying restorator ( polymer reinforced structural repair mortar ) of approved make like ZUPA or equivalant where ever required. (Room size 4600mmx3500mm -walls and ceiling).

Door (1200x2400 size)

Window (1200x1650 size)

Providing and fixing white vitrious china wash basin 550mmx400mm size with 15mm CP brass pillar tap, 32mm waste coupling and pipe,C.I. brackets including connecting and laying water supply line 20 mm UPVC pipe up to a length of 5mtr and 65mm dia UPVC drainage pipe up to a length of 5mtr including cutting and making good the walls and painting etc. complete.

Providing and fixing 17mm thick pre laminated exterior grade HDF board folding type Dining table of size 1200mm x 500mm including fixing with steel powder coated folding type (Heavy duty table bracket) with 600mm long (capacity 150kg) - 2Nos

Providing water proofing treatement on sunshade and walls in four layers after scrubbing and cleaning the existing surface. (1) First layer of slurry of 0.50kg cemennt and 0.25 kg water proofing compound per sqm (2)Second layer of fibre glass cloth when the first layer is still green .(3)Third layer of 1.5mm slurry of 1.30kg cement and 0.67 water proofing compound and 1.30kg coarse sand per sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours (4) 12 mm thick cement plaster 1:3 (1 cement: 3 sand) finished smooth.The treatement shall be done for an area 30cm beyond the leakage portion and water cured for 7 days.Sunshade of window and ventilator and adjucent wall.

Providing and fixing LED light fitting of approved quality and make such as philips, luker or equivalent including connecting the wiring from existing powerpoint upto a length of 1m.

Removing the existing fan and servicing the same and refixing including wiring for connecting to existing powerpoint upto a length of 1m and replacing the fan rod of required length.

Providing and fixing wall cabinet made of 17mm thick bothside pre laminated exterior grade HDF board verticals with horizontal shelves and backing with 7.5mm thick both side prelaminated exterior grade HDF board including providing and fixing 6mm thick floated glass sliding shutters with necessary fittings such as E type aluminium sliding channel,stainless steel telescopic rollers etc complete as directed by the Officer-in-charge.(Approximate face area of 1.50 sqm ) as per approved drawing and directions of Officer in charge.

Area of wall cabinet is 1.50 sqm

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing standard CP brass towel rod 610 mm long of approved quality confirming to IS standards including fixing with CP brass screws etc. complete.

JOSEPH ANTONY T C