WELCOME MAINTANANCE TO OFFICERS MD ACCN AT INS DRONACHARYA UNDER GE FORT KOCHI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises, all as specified and directed.

M&L 15 mm thick screed bedding layers in cement mortar 1:4 for laying floor finishes tiles, all as specified and directed.

Rendering 10 mm thick in CM 1:3 on brick or concrete surfaces, finished fair and even for receiving wall tiles, all as specified and directed.

M&L Joint free non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour to match complete all as specified and directed.

M&L 7-8 mm thick dark shade vitrified ceramic tile, square/rectangular, polished, area of each tile not exceeding 0.36 sqm in floors/skirting set jointed and pointed in neat cement slurry and pointed to match, all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exc. 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour to match complete all as specified and directed.

M&L for glazed ceramic tiles, coloured of size 300 x 400/450 x 7 mm thick as in dado/skirting and riser to steps and jointed in neat cement slurry and pointed in white or coloured cement to match complete, all as specified and directed.

S&F stainless steel grills/railings fixed to walls/floors of Grade-304 including all pieces, drilling holes, swelling, buffing, complete including taking down old rusted one complete all as specified and directed.

S&f in repair 20 mm dia curtain rods, anodised aluminium alloy fixing with brackets, all as specified and directed.

S&F in repair 30 mm dia stainless Steel fancy type(powder coated) curtain rods with decorative single Knob and brackets on either sides in Doors/Windows as per sample complete all as specified and directed.

S&F in repair waste coupling brass, chromium plated for wash hand basin with long screwed shanks and fly nuts fixed in repair 32mm bore, all as specified and directed.

S&F in repair15 mm Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed, all as specified and directed.

S&F in repair waste coupling brass, (40mm) chromium plated suitable for steel sink including strainer etc complete, all as specified and directed.

S&F Sheet glass ordinary quality & glazing with aluminium / wooden beading and clip in square n-exc. 0.5 sqm in each pane 4 mm thick including hacking down complete all as specified & directed.

S&F Sheet glass ordinary quality & glazing with aluminium / wooden beading and clip in square exc. 0.5 sqm in each pane 4 mm thick including hacking down complete all as specified & directed.

S & F in repairs vitreous china wash down water closet (Pedestal pattern) white with 'P' trap complete including plastic seat cover white closed pattern with flat bottom, and cover with plastic hinges, all as specified and directed.

S&F in repairs vitreous china wash basin, white flat back, size 550 X 400 mm fixed to wall by anchor bolts excluding taps, waste coupling, waste pipe etc complete .

S&F in repair PVC low level flushing cistern 10 Ltr capacity including float valve and flush pipe complete

S&F in repairs fancy type pillar taps cast copper alloy, with capstan head, chromium plated, screwed down, high pressure, with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Bore of pipe in 15mm, all as specified and directed.

S&F in repairs PVC inlet connections 60 cm long, 15 mm bore with PTMT nuts, all as specified and directed.

S& fix in repairs Towel rail chromium plated, fixed in repairs complete 600mm long, all as specified and directed.

S&F in repairs door closer aluminium (extruded section) body hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, all as specified and directed.

S&F in repairs Toilet paper holder SS fixed in repairs complete all as specified and as directed.

S&F in repairs Stainless steel soap dish fixed with SS screws, all as specified and directed.

S&F in repairs anodised aluminium alloy body door stopper 75 mm size, all as specified and directed.

S & F in repair CP grating 100 mm dia with /without hole, all as specified and directed.

S&F in repair Plastic water closet seat cover (any Type) black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, all as specified and directed.

S&F in repair aluminium wire mesh fix to wood/aluminium frames including taking out old damaged aluminium wire cloth complete all as specified an directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail & bottom rail on either side & as gap insert for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the M s frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,supplying & fixing in the frame at site as per specification & drawing, all as specified and directed.

S&F solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specification & drawing, all as specified and directed.

S&F in repair Aluminium alloy wire cloth, 0.45 mm, nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beadings, all as specified and directed.

S&F anodised aluminium extruded handles 150 mm size, all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 200 mm size, all as specified and directed.

S/F butt hinges 75 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised C-21, all as specified and directed.

Taking down chowkhats or frame with shutters (without taking shutter from frame) exc 1.5 sqm and n. exc 4.0 sqm and removing from site, all as specified and directed.

Taking down chowkhats or frames not exc 1.5 sqm with shutter(without taking of shutter from the frames) including hold fasts and PCC block, all as specified and directed.

Taking down shutter of any description, exceeding. 1Sqm and not exceeding 2 sqm each and removing from site all as specified and directed.

Taking down shutter of any description, exceeding. 2 Sqm and not exceeding 4 sqm each and removing from site all as specified and directed.

S &F of second class hard wood 'teak' plain solid straight chowkats and frames wrought framed rebated on chamfered put together with glue pinned at joints etc complete, all as specified and directed.

S & F 30 mm thick Plain, framed, panelled shutters(any number of panels), with panels of timber (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted, all as specified and directed.

S & F 35 mm thick II class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; as per section 8.28 (a) sizes of members of shutters all as specified and directed.

M&L Preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surface all as specified and directed.

S&F 100 mm size Mild steel butt hinges medium weight, fixed to chowkhat all as specified and as directed.

S&F 75 mm size Mild steel butt hinges medium weight, fixed to chowkhat all as specified and as directed.

S & F 100 mm long aluminium anodised barrel tower bolt all as specified and as directed.

S & F 150 mm long aluminium anodised barrel tower bolt all as specified and as directed.

S&F 150 mm long aluminium handle fabricated type anodised all as specified and as directed.

S&F 250 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete, all as specified and directed.

S&F 300 mm, size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete, all as specified and directed.

Supply and fix half/quarter turn 15 mm bore bib tap, cast brass chromium plated fancy type with crutch or butterfly handle, screwed for iron pipe long body, complete all as specified and directed (Weight not less than as specified in SSR)

Supply and fix half/quarter turn 15 mm bore bib tap, cast brass chromium plated fancy type with crutch or butterfly handle screwed down screwed for iron pipe short body, complete all as specified and directed (Weight not less than as specified in SSR)

Supply and fix in repair for 15mm bore bib taps, chromium plated alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix in repairs half/quarter turn 15 mm Stop valves, cast brass chromium plated fancy type with crutch or butterfly handle complete all as specified and directed.

Supply and fix in repairs half/quarter turn 20 mm Stop valves, cast brass chromium plated fancy type with crutch or butterfly handle complete all as specified and directed.

Supply and fix half/quarter turn 15 mm dia Angle cock, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down high pressure with crutch or butterfly handle, screwed both ends iron pipe including taking down old cock, complete all as specified and directed.

Supply and fix in repairs Health faucet suitable for ABS Body chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete suitable for working pressures of high rise buildings up to 11 floors in all respect as specified and directed.

S&F in repair 15mm dia brass, chromium plated WHB mixer tap for mixing hot & cold water, screwed down, complete all as specified and directed.

Supply and fix 125 mm shower rose chromium plated with swivel joints suitable for fixing to 15 mm GI/UPVC/CPVC pipe or union including taking down old shower, all as specified and directed

Supply and fix in repair 15 mm dia ball valves brass high pressure with polythene float and fly nut , complete all as specified and directed.

Supply and fix in repair 20 mm dia ball valves brass high pressure with polythene float and fly nut, complete all as specified and directed.

Supply and fix in repair 25 mm dia ball valves brass high pressure with polythene float and fly nut, complete all as specified and directed.

S&F in repairs anodised aluminium alloy body door stopper 150 mm size, all as specified and directed.

M&L for brass spindle suitable for bib tapes /stop valves/mixer of size 15/20mm as per site requirement, all as specified and directed.

S & F as in repairs 50 mm bore high density poly-ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc, including required bend complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls (plastered or un-plastered) and cornices, by brooming down , scrapping down smoke soot, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash on walls all as specified and directed by Engr-in-Charge.

-Ditto- all as per item No 67 above but on ceiling.

M & L for preparation and complete removal of old existing surfaces of wall and applying two coats of Distemper Oil emulsion over a coat of primer complete all as specified and directed.

-Ditto- all as per item No 69 here in before but on ceiling surfaces

M & L Preparation of old distempered and painted surfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of Distemper oil emulsion on wall surfaces, all as specified and directed.

-Ditto- all as per item No 71 above but on ceiling surfaces

M&L preparation of existing treatment of old surface including brooming down , scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and grease spouts and cleaning with water on wall applying one coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved complete all as specified and as directed.

M-TECH ENGINEERS (BID ID -3166158)

SOORYA ASSOCIATES (BID ID -3176012)