Kerala

Financial BO

Works

Civil Works - Others

Maintenance of Compound wall and Roof of Drivers room in Dawsons IB at Nedumgayam in Nedumgayam FS of Karulai Range during 2026-27

Forest Department

Nedumayam Karulai | Malappuram, Kerala

Amount: ₹1.0 LCloses: 25 Sept 2026Closed

Timeline

Published18 Sept 2026
Closed25 Sept 2026
Financial Evaluation—
Award—

Bids

Percentage

2 Bids28 Sept 2026

#	Company	Quoted %	Amount	Rank	Status
1	Rashid K L1₹1.0 LAdmitted-Fee/PreQual/Technical/Finance KALATHINGAL HOUSE KARAKKUNNU POST MALAPPURAM \| MALAPPURAM \| MALAPPURAM \| KERALA \| 676123	-0.01%	₹1.0 L	L1	Admitted-Fee/PreQual/Technical/Finance
2	MILITARIZE CONSTRUCTION L2₹1.0 L+₹10.42 (<0.01%)Admitted-Fee/PreQual/Technical/Finance	+0.00%	₹1.0 L+₹10.42 (<0.01%)	L2	Admitted-Fee/PreQual/Technical/Finance

Tender Value

₹1.0 L

EMD Value

₹2,606

Closing Date

25 Sept 2026, 5:00 pmClosed

Tender Inviting Organisation

Name

Divisional Forest Officer Nilambur South division

Address

Divisional Forest Officer Nilambur South division

Work Description

Maintenance of Compound wall and Roof of Drivers room in Dawsons IB at Nedumgayam in Nedumgayam FS of Karulai Range during 2026-27

Tender Information

Tender ID

2026_FD_861189_3

Reference Number

D-41193/26/S

Tender Type

Open Tender

Product Category

Civil Works - Others

Form of Contract

Percentage

Period of Work

90 days

Location

Nedumayam Karulai

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

5 documents required · 5 mandatory

Fee/PreQual/Technical/Finance

RequiredValid PWD registration certificate (.pdf)

RequiredPreliminary agreement in stamp paper worth Rs 200 (.pdf)

RequiredStandard Bid Document duly signed (.pdf)

RequiredRate Quoted BoQ (.xls)

RequiredAny other relevant documents as per tender conditions (.pdf)

Fee & Financial Details

Tender Fee Amount

₹555

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹2,606

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

28 Sept 2026

Published

18 Sept 2026

Bid Opening

28 Sept 2026

Download Starts

18 Sept 2026

Download Ends

25 Sept 2026

Submission Starts

18 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (8 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Compound wall Mntce
1.001	50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.	4.78	cum	6,906.51	₹33,026.93
1.002	13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)	31.14	sqm	353.88	₹11,019.82
1.003	OD70778/2026-2027:Providing and fixing M.S. Grills of required pattern and design etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding	135.59	kg	126.96	₹17,214.51
1.004	OD70785/2026-2027:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications, EXCLUDING appropriate PRIMING COAT(it's already included in steel work), preparation of surface, etc., complete.On steel work	12.65	sqm	159.83	₹2,021.85
1.005	13.37.1:White washing with lime to give an even shade:New work (three or more coats)	31.14	sqm	37.35	₹1,163.08
2Drivers room roof
2.001	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	100	kg	178.44	₹17,844
2.002	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	25	sqm	773.52	₹19,338
2.003	12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)	5	metre	519	₹2,595

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Bid Opening Summary

finance_1476359.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.05 MB

Work Item Documents

SBD_IB.pdf

Tender Documents • 1.63 MB

BOQ_1476359.xls

BOQ • 0.31 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

Rashid K

L1₹1.0 LAdmitted-Fee/PreQual/Technical/Finance

KALATHINGAL HOUSE KARAKKUNNU POST MALAPPURAM | MALAPPURAM | MALAPPURAM | KERALA | 676123

MILITARIZE CONSTRUCTION

L2₹1.0 L+₹10.42 (<0.01%)Admitted-Fee/PreQual/Technical/Finance

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Compound wall Mntce
1.001	50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.	4.78	cum	6,906.51	₹33,026.93
1.002	13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)	31.14	sqm	353.88	₹11,019.82
1.003	OD70778/2026-2027:Providing and fixing M.S. Grills of required pattern and design etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding	135.59	kg	126.96	₹17,214.51
1.004	OD70785/2026-2027:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications, EXCLUDING appropriate PRIMING COAT(it's already included in steel work), preparation of surface, etc., complete.On steel work	12.65	sqm	159.83	₹2,021.85
1.005	13.37.1:White washing with lime to give an even shade:New work (three or more coats)	31.14	sqm	37.35	₹1,163.08
2Drivers room roof
2.001	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	100	kg	178.44	₹17,844
2.002	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	25	sqm	773.52	₹19,338
2.003	12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)	5	metre	519	₹2,595

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Compound wall Mntce

1.001

50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.

4.78

cum

6,906.51

₹33,026.93

1.002

13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

31.14

sqm

353.88

₹11,019.82

1.003

OD70778/2026-2027:Providing and fixing M.S. Grills of required pattern and design etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding

135.59

126.96

₹17,214.51

1.004

OD70785/2026-2027:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications, EXCLUDING appropriate PRIMING COAT(it's already included in steel work), preparation of surface, etc., complete.On steel work

12.65

sqm

159.83

₹2,021.85

1.005

13.37.1:White washing with lime to give an even shade:New work (three or more coats)

31.14

sqm

37.35

₹1,163.08

2Drivers room roof

2.001

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

100

178.44

₹17,844

2.002

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

sqm

773.52

₹19,338

2.003

12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)

metre

519

₹2,595