RENEWAL WORK OF NANPARA- SHANKARPUR- LALPUR-HUZOORPUR ROAD (MDR) IN DISTRICT BAHRAICH FINANCIAL YEAR 2025-26 (VIDHAN SABHA-MATERA) WITH FIVE YEAR MAINTENANCE

Tack Coat:- Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

Dense Graded Bituminous Macadam Grading II:-Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.

Bituminous Concrete Grade - II:- Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects

Construction of Subgrade and Earthen Shoulders with Material Deposited from Roadway Cutting:- Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2

Providing and laying of hot appiled thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC: 35-2015. The finished surface to be level, uniform and free from streak and holes. as per Lucknow SOR signage 2020., Morth 803 (8.13).

Providing and laying of hot appiled thermoplastic compound 5.0 mm thick including reflectorising glass beads @ 500 gms per sqm area, Thickness of 5.0 mm is exclusive of surface applied glass beads as per IRC: 35-2015. The finished surface to be level, uniform and free from streak and holes. as per Lucknow SOR signage 2020., Morth 803 (8.13).

Please Enable Macros to View BoQ information