C.O AE Office Cum residence Building at Sarahan Tehsil Rampur Distt. Shimla (H.P.)

Amount

Cutting in earth work in hilly area in all heights and depths in all kind of soil by manual/mechanical means including saturated soil comprising of mixed soil, ordinary rock and hard rock all work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side,water pollution, etcetra and to protect stability of hill side track shall be excavated with chiseling and wedging out rock (where blasting is prohibited). all earth work in cutting/excavation including rock excavation shallbe carried,out true tolines,grades,side slopes, width, camber super-elevation and level as shown on the drawings or as directed by the Engineer-in-Charge,in conformit with the requirement of technical specification for Rural Road. clause 1603.1 and 1603.2 .including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Excavation in earth work in hilly area in all heights and depths in all kind of soil by manual/mechanical means including saturated soil comprising of mixed soil, ordinary rock and hard rock all work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side,water pollution, etcetra and to protect stability of hill side track shall be excavated with chiseling and wedging out rock (where blasting is prohibited). all earth work in cutting/excavation including rock excavation shallbe carried,out true tolines,grades,side slopes, width, camber super-elevation and level as shown on the drawings including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and laying cement concrete 1:5:10 (One cement : five Sand :ten graded stone aggregate forty mm nominal size) and curing complete excluding the cost of form workin Foundation and plinth. including carriage of material including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1 :5;10 ( one Cement : five Sand : ten graded stone aggregate forty mm nominal size and curring complete. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement : six coarse sand : twelve graded stone aggregate twenty mm nominal size) upto plinth level with : Cement morter 1:6 (one Cement : six Sand) including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Backfilling behind abutment wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 including carriage of materials in all leads and lifts. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and laying 100mm dia metre PVC pipe for weep holes complete of approved quality Including carriage of material within all leads and lifts. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Centering and shuttering including strutting, propping etc. and removal of form for all heights : including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.Foundations, footings, bases of columns, etc. for mass concrete including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Suspended floors, roofs, landings, balconies and access platform including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Columns, Pillars, Piers, Abutments, Posts and Struts including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Stairs, (excluding landings) except spiral-staircases including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Edges of slabs and breaks in floors and walls including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Lintels, beams, plinth beams, girders, bressumers and cantilevers including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:6:12 (one cement : six coarse sand: twelve graded stone aggregate forty mm nominal size) including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and laying cement concrete 1:2:4 (one cement:two Sand:four graded stone aggregate twenty mm nominal size) and curing complete excluding cost of form work in: including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (one cement : one point five coarse sand: three graded stone aggregate twenty mm nominal size) including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (one cement : one point five coarse sand: three graded stone aggregate twenty mm nominal size). including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and laying cement concrete 1:2:4 (one cement:two Sand:four graded stone aggregate twenty mm nominal size) and curing complete excluding cost of form work in: For Moulding including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (one Cement : six Sand including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (one cement :four coarse sand) including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing 35 mm (Thrity five milimetre) phenol bonded ( ALPRO) ISI marked flush door commercial both side i/e Nondecorative panal bonded termit resistant and water proof core board with frame of ISI class hard wood and well match comcricial three ply veneer with vertical grain or cross band and face veneer both face of two IS No 2202 two thousand two hundred two of kit ply/ Alpro comtax per Arch drawing, direction of the Engineer in charge and HPPWD specification 1990- Vol-I i/e carrage of materials in all respects including carriage of materials within all leads and lifts. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing 19mm(Ninteen milimetre) thick Commercial Board water proof shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc complete) including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing 6 mm ( Six milimetre) thick ply wood back side of cup board lining with butt jointing and nails ( frame work and covver fillets to be measured and paid for separately including carriage of material within all leads and lifts and as per the direction of Engineer-In-Charge.

Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge.

Providing and fixing 1.00 mm (one milimetre) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :200x10 mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

150 x 10 mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125 mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing ISI marked oxidised M.S. Hook and eyes conforming to IS:4992 with necessary screws etc. complete including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge. :

Providing 40x3 mm flat iron hold fast 40mm. Long including fixing to frame with 10m diameter bolts nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing M.S. grills of required pattern in wooden frames of windows etc. with M.S. flats square or rounded bars with round headed bolts and nuts or by screws including carriage of materials in all leads and lifts including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and Fixing bright finished bress hasp and staple ( safety type) with necessary screws etc. Complete. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing ISI marked oxidised M.S single acting spring hinges with necessary screws etc. Complete. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge designation 85 (eighty five) G. with wire of dia 0.56 mm (zero point fifty six millimetre) for doors windows and clerestory windows including bright finished black enamelled iron butt hinges with necessary screws forty mm thick as per HP.PWD specification 1190 volume-1 including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts including all incidental charges etc. and as per direction of Engineer-in- Charge.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) : including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Kota stone slabs 20mm thick in risers of steps, skirting, dado and pillars laid on 12mm (average) thick cement mortar 1:3( one cement, three course sand) and jointed with gray cement slury with pigment to match the shade of the slabs, including rubbing and polishing complete. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (one cement : three coarse sand), including pointing with white cement mortar 1:2 (one white cement : two marble dust) with an admixture of pigment to match the marble shade (to be secured to the backing by means of cramps, which shall be paid for separately). Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white ement and matching pigments etc., complete including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and laying heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base concrete with 25mm thick of average thickness of cement mortar 1:4 (one cement : four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for separately) including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cementand dado 12 mm thick cement mortar 1:3 (one cement :three sand) and jointed with cement slurry. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 1518 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Flashings/ Aprons.( Upto 600 mm) Valley including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing flushing 38cm overall with 0.60mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : gutter 600mm over all girth including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing on wall face150mm dia pipes PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing M.S black sheet 1.66 mm to 2 mm thick facia/ soffits/ eaves board/ ceiling fixed with angle iron frame including cutting welding to steel roof members and applying a coat of red lead primer etc ( base members of steel work shall be measured and paid for separetely) including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing steel window made of frame with mild steel channel 75x40 (Seventy five X forty) milimeters and mild steel flat of 75 x 5 (Seventy five x five) milimeters to make one frame providing double rebate with making square steel section with mild steel flat of 20 x 4 ( Twenty x four) milimeters and 12 x 4 ( Twelve x four)milimeters, shutters ,of Z section including glass panes of 3 (Three) milimeters thick in glazed panel and wire gauge of designation 85( Eight five) G with wire of 0.56 ( Zero point five six) milimeters dia in wire gauge panel and fixed glazing fixed with angle and T section of 25 x 25 x 3 ( Twenty five x Twenty five x Three) milimeters and mild steel flat of 12 x 4 ( Twelve x four) milimeters flash bars duly welded of all meters and stack properly hold fast of milimeters flat.100x100x100(one hundredx one hundred x one hundred) milimeters size( one cement three sand six graded stone) aggregate 20 ( Twenty) milimeters nominal size) including providing and fixing of fittings that is handles tower bolt hooks and eyes and applying a coat of primer with red lead paint and fixing in position complete as per drawing, direction of the Engineer- in- charge.and HPPWD specification 1990- volume-1 including carriage of all labour equipment and material to various location through all modes of transporation in all loads and lifts including all incidental charges and applying a coat of primer with red lead paint and fixing in position complete as per drawing, direction of the Engineer- in -Charge and HPPWD. specification 1990 - Volume -1 including carriage of all labour equipment and materials various location through all modes of transpotation in all leads and lifts including all incidental charges.

Providing and fixing angle iron door, windows, cleresstory window frame manufactured from steel iron section of 35 x 35 x 4 mm, thickness including hinges jamb, lock jamb, beed and if required angle thrashold of mild steel flat 50x4 mm welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel but thinges 2.5 mm thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer- in Charge.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (one cement: six coarse sand) including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

12 mm cement plaster of mix : 1:6 (one cement: six coarse sand) including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

6 mm cement plaster of mix 1:3 (one cement : six fine sand) including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

White washing with lime on undecorated wall surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt. Dust mortar dirt and other foreign matter. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing plinth protection 50 mm ( fifty millimetre) thick in cement concrete 1:3:6 (one cement : three sand : six graded crushed stone aggregate 20mm ( twenty millimetre) nominal size including finishing the top surfaces of concrete smooth including carriage of material within all leads and lifts and as per the direction of Engineer-in-Charge.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size will rammed and consolidated and grouted with fine sand including preparation of ground. Detail of cost for 10 Sq.M. . including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing to wall ceiling and floor galavnised mild steel tubes (medium grade) tube fitting and clamps including making good the wall, ceiling and floor:- 15 mm nominal bore. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing PVC water storage tank of ISI : 12701 marked,G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto a height of 10 metres above ground level :- including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing sand cast / cast iron spun spigot and socket soil, waste and ventilating pipes ( lead caulked joints to be measured and paid for seperetely): including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing cast iron holder bats including steel bolts to sand cast iron / cast (spun) iron pipes embeded in and including cement concrete blocks 100mm x 100mm x100mm of 1:2:4 mix (one cement : two sand : four graded stone aggregate twenty mm nominal size) including cost of cutting holes and makings good the walls: including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing sand cast iron / cast iron spun fittings and accessories: Bends of required degree 100mm nominal size including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Off set 100 mm nominal size including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Single equal branch of required degree.100 mm nominal size including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Double equal branch of required degree 100 mm nominal size including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Plain Bends 100 mm nominal size including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing lead caulked joints to sand cast iron Cast (spun) iron pipes and fittings including testing of joints. 100 mm nominal size including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm x 90 mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing vitreous China water closet squatting pan (European type W.C. ) cat No 2090 in white colour Of (PRIMA) Cera or its equivalent including carriage of material up to all leads and lifts and as per the direction of Engineer-in-Charge. (a) Anglo Indian Universal including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing 100mm size 'P ' or ' S ' trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 (one cement : one sand) including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing G.I. Inlet connection for flush pipe with W.C pan. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing vitreous china bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately.) including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing automatic flushing cistern with a pair of C.I. Or M.S brackets complete with fittings including C.I. Syphonic appratus mosquitos proof lid, C.P. brass unions and coupling for connecting with inlet, outlet and over flow pipes including cutting holes and making good the same (Over- flow pipe to be measured and paid for separately). including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing 10.00/12.50/15.00 litres vitecous china low level flushing cistern with a pair of C.I or mild steel brackets, complete with fittings such as lead valve less syphon 15mm nominal size bras ball valve with polythene float, C,P brass handle, unions and couplings for connections with inlet, outlet and over flow pipes 40mm dia C.P flush band including cutting holes in walls and making good the same and connectiong the flush band with cistern and closet (overflow pipe to be measured and paid for separately). including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing vitreous china bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately.) including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. Or M.S brackets painted white including cutting holes and making good the same but excluding fittings : including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing C.P. brass waste for wash basin or sink : 32 mm dia including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing of G.I. Union for wash basin or sink : 32 mm dia including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing C.P. Brass trap for wash basin and sink: 32 mm dia including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing 600mm x450mm bevalled edge mirror of superior glass mounted on 6mm thick A. C. sheet or ply wood sheet and fixed to wooden plug with C.P. brass Screw and washers :including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing chromium plated brass soap dish with CP brass brackets fix of standred mark to wooden clips with CP brass screws including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing C.P Brass towel rail complete with C.P Brass brackets fixed to wooden plugs with C.P brass screws 750 mm x 20 mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing C.P brass bib taps with capstan head weigth 400 gms . including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing brass stop cocke: 15 mm dia including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing P.V.C connection pipe with brass unions. 30 cm length / 45 cm length 15 mm nominal size bore including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing brass full way valve with wheel including carriage of materials within all leads and lifts :- including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing 100mm sand cast iron grating for gully floor or nahni trap: including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Cunstructing chamber 300 mm x 300 mm x 500 mm inside size for stop cock with C.I. Surface box 100 mm.x 100 mm x75 mm. (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Constructing manhole with R.C.C. top slab in 1:2:4 mix (one cement : two sand : four graded stone aggregate twenty mm nominal size), foundation concrete 1:4;8 ( one cement ; four sand : eight graded stone aggregate forty mm nomonal size), inside plastering 15mm thick with cement mortar 1:3 (one cement : three sand) and finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix (one cement : two sand : four graded stone aggregate twenty mm nominal size) finished smooth complete including curing and testing including carriage of materials within all leads and lifts :- including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing C.P Brass pillar tap with capstan head C.P Brass pillar tap with capstan head 15 mm dia including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing plastic seat (solid / Holow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and fixing Steel Kitchen sink with C.I. Or M.S brackets painted white including cutting holes in walls and making good the same but exclueing fittings: White glazed fire clay 600 mm x 450 mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm (forty mm) thick with twenty mm nominal size stone aggregate including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

20mm (Twenty millimeter) thick cement plaster in single coat on frough side of brick/concrete/stone walls for interior plastering up to all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimeter) in girth and finished even and smooth in cement mortar 1:4 (one cement : four sand) including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Preparation of sub grade by dressing to combor (Earth work for the cutting involved for sub-grade to be paid for separately depending upon the classification of soil completed as per HP.PWD specifications. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Consolidation of sub grade with road roller including making good the undulation etc. with earth or quarry soil etc. and rerolling the sub-grade completed as per HP.PWD specifications including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 1 as per Technical Specification Clause 404.By Mechanical Means including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bond macadom specification including spreading in uniform thickness,hand packing, rolling with smooth wheel roller 80/100 KN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill up the interstices of course aggregate, watering and compacting to the required dencity grading-II as per technical specification clause 405.using stone aggregate 53mm to 22.40mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bond macadom specification including spreading in uniform thickness,hand packing, rolling with smooth wheel roller 80/100 KN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill up the interstices of course aggregate, watering and compacting to the required dencity grading-II I as per technical specification clause 405.using stone aggregate 53mm to 22.40mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning the road surface with hydralic broom and spraying primer at ther ate 1.05 kg (one point zero five kilogramme) per square metre using mechnical means as per Technical Specifictions Clause 502 including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kg (zero point two seven five kilogramme) per square metre on the prepared bitumenous surface and cleaned with Hydraulic broom as per Technical Specification Clause 503 by mechanical means including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing, laying and rolling of open graded premix carpet of 20mm thickness composed of 13.2mm to 5.6mm ( thirteen point two millimeters to Five point six milimeters)course stone aggregate at the rate 0.27 cum (Zero point two seven) Cubic meter mixed with 14.6kg (fourteen point six kilogram per 10 sqm (Ten sqm bitumen either using penetration grade bitumen VG-10 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80/100 static roller capacity finished to required level and grades to be followed by seal coat of type B as per technical specification clause 508 by manual meams. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

Providing, and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type B using bitumen VG-10 at the rate of 6.8 kg per 10 sqm as per. technical specification clause 510 by manual meams. including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.

KAILASH THAKUR