COMPREHENSIVE MAINT ITEMS OF OFFRS MD ACCN, CENTRAL INSTITUTE STN POOL AND MISC UNITS AND STREET LIGHT SCRURITY LIGHT POLE PINTING AND OTHER MISC WORKS AT MIL STN DHRANGADHRA

Amount

Resecuring or Easing of door shutters for easy closing/opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing iron mongry exc 1 Sqm and n.exc 2 Sqm each complete all as specified and directed.

Taking down door shutters from pressed steel door frame and replacing of unserviceable existing butt hinges and re-fixing in same opening exc 1 sqm & n exc 2 sqm each including welding complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L PCC 40mm thick 1:2:4 of type B1 using 20mm graded stone aggregate as floor finishing surface even and smooth without using extra cement laid in pannels complete all as specified and directed.

Forming construction joints 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

S &F Non - skid Ceramic white tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match complete all as specified and as directed.

S &F Non - skid Ceramic white tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match complete all as specified and as directed.

S&F Joint free Glazed ceramic tiles in vertical surface 450X 300X 7/8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendring in CM 1:4 complete all as specified and as directed.

M&L for rubber moulded exterior grade joint less coloured tiles, 10mm thick, area exc 0.06 sqm but n.exc 0.38 sqm with grey cement and pigments set & jointed and pointed in neat cement slurry over and including 15mm thick cement screed bed in cm 1:6 with grey cement and pigments complete all as specified and directed.

M&L for chequered cement concrete tiles 20cmx20cmx25mm thick set ,jointed and with mixture or white & grey cement in equal proportion & no pigment ,pointed in neat cement slurry in floors over and including 15mm thick cement screed bed in cm 1:6 with grey cement and pigments complete all as specified and directed.

Demoliton of precast cement concrete block walling, precast concrete articles etc complete.

M&L for Pre-cast cement concrete type C-1 (1:3:6) with 20 mm graded aggregate, block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed.

M & L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole cover, shelves, chajjas etc and set in CM 1:6 complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified.

M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundtion of pole/stay assembly etc including necessary form work, all as specified and directed.

M & L for providing cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate, as in coping bed blocks including necessary form work complete all as specified and directed

M&L for Cement concrete 1:3:6 type C2 (40 mm graded aggregate) in surface channels and drains complete all as specified and directed.

Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 finished fair and even complete all as specified and directed.

M & L 15mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:6 finished fair and even complete all as specified and directed.

M&L 5mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection complete all as specified and directed.

M&L for applying two coats of exterior weather coat on newly plastered surfaces of wall including preparation on new surface.by applying exterior grads Birla care putty to gett smooth surface over one coat of primer complete all as specified and directed

M&L two coats of distemper oil emulsion on ceiling including preparation of newly plastered surface and complete all as specified.

M&L for complete removal of existing treatment, preparation of surface and applying two coat of oil bound distemper on surfaces of walls over a coat of alkali resistant primer over 1 mm thick wall care putty all as specified complete all as specified.

M&L for preparation of old painted or plastered surfaces of walls etc by washing, rubbing down and applying one coat of cement base paint complete all as specified & directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of white wash complete all as specified & directed.

M&L for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified & directed.

M&L for , false ceiling consisting of wall angles ,main T ,cross T all of size 25 mm X25mmX1.4mm thick power coated GI grid frame work jointed angle as directed and mild steel hooks not less than 4 mm dia with arrangement for adjusting heights of ceiling with and incl provision of 4 mm thick E boards sheet in panels of size 600mmX600mm with necessary off cuts and fixing arrangements for ceiling ,tube light fitting incl dismantling of existing false ceiling complete all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

M&L in repair for pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed

M&L in repair for hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise proviceded for complete all as specified and directed.

S&F rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed.

Fixing rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed.

S&F MS angle iron framed work as in doors or gate of angle or other section conforming to Fe 290 (Gde E-165) with gusset plates rails braces etc complete including hangin galso fastenin gand fxing complete as specified and directed .

S&F in repairs for 15 mm bore medium grade galvanised steel tubing with all fittings and fixed (connciled) complete to walls and ceiling or laid in floor down complete all as specified and directed.

S&F in repairs for 20 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

Taking down and refixing only old galvanized iron pipe 20mm bore in new or old position with new fittings as in wall and ceiling or laid in floors complete all as specified and directed.

Taking down and refixing only old galvanized iron pipe 15mm bore in new or old position with new fittings as in wall and ceiling or laid in floors complete all as specified and directed.

S&F in repairs 15mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms )complete all as specified and directed.

S&F in repairs 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms )complete all as specified and directed.

S&F in repair 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 20mm dia tubular Towel Rail 600mm long between flanges of brass chromium plated complete all as specified and directed.

S&F in repair Soap dish of cromium plated, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair brass Chromium plated shower roses 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair 32mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) fixed in repair complete all as specified and as directed.

S&F in repair Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed

S&F in repair for CP health faucet (hand shower) with 1.5 m long , SS flexible tube and wall hook complete all as specified and directed

S&F in repair 15mm bore fency type CP Brass Bib taps with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S&F in repair 15 mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed

Do - all as per above item 51 but 20 mm bore

S&F in repair CP brass wall mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and directed.

S&F in repair brass spindle/leg pair for central hole basin mixer (as per sample) for mixing hot & cold water screwed down for iron pipe and fixed with pvc conncetion complete all as specified and directed.

S&F in repair CP Brass central hole basion mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and directed.

S&F in repair toilet paper holder of chromium plated (CP) with brass screws complete all as specified and directed.

S&F in repair PVC cabinet mirror bathroom size 600x450mm box type of make PRAYAG complete all as spd and dsirected.

S & F in repairs vitreous china hand wash basin white exclusive quality flat back size 550 x 400 mm including brackets, PVC waste pipe and waste coupling fixed complete all as specified and directed.

S&F in repairs 600mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S&F in repairs 450mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S&F in repairs viterous China wash down water closet EWC including to connection to drain and flush pipe (excluding flushing cistern and flushing pipe) incl trap set complete all as specified

S&F in repair vitreous china wash down water closet, "Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of cement concrete bedding complete all as specified & directed.

S&F in repair Single piece vitreous China suite european water closet and cistern, white colour, with UF seat cover with fittings complete all as specified and as directed Make Parryware Cat Part No C8906 (S-300) or equivalent model of Hindware / Cera / Jaquar / RAK as approved .

S&F Vitreous China urinal Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) white (minimum), with grating ,urinal spreader and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) incl Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle complete all as specified and directed.

S&F in repairs 1000 liters capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including connections incl 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball all as specified.

S&F in repairs 500 liters capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including connections incl 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball all as specified.

S & F as in repair Butt hinges 100 mm, extruded aluminium alloy with galvanized mild steel hinge pin, anodised of type C-21 and complete all as specified and as directed.

S&F as in repairs 200mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&Fas in repairs 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&Fas in repairs 300mm aluminium anodised sliding door bolt of extruded section complete all as specified and directed.

S& Fas in repairs 150 mm extruded aluminum alloy handles, fabricated type anodised complete all as specified and directed.

S&F as in repair 100 mm Butt hinges, medium weight, cold rolled mild steel, fixed to steel frames with and including welding etc complete all as specified and directed.

S&F in repair Aluminium Door closer hydraulically regulated designation No 1 universal for door shutters up to 700 mm in width and of weight not more than 35 kg complete all as specified and directed.

S&F in repairs Stasinless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple/ rubber or aluminium beading if required in wooden or aluminium frame complete all as specified and as directed.

S&F 28mm dia fancy type wooden finish MS dropery rod fixed with wooden finale stop, brackets etc to wall complete as sample approved all as specified and directed by Engr - in - charge.

S&F in repair 300mm mild steel,ordinary rat tail rod pattern spring including roller and plate and fixing by welding or screws etc complete all as specified and directed.

S&F in repair of curtain rod 20 mm dia mild steel CP with fixing brackets ,stop, roller etc

S&F sheet glass 4.00 mm thick ordinary quality and glazing with rubber and aluminium beading in square exc 0.5 sqm in each pane complete all as specified

S&F in repair sheet glass 4.00 mm thick ordinary quality and glazing with rubber and aluminium beading in square exc 0.5 sqm in each pane including taking down all as specified

S&F in repair sheet glass 3.00 mm thick ordinary quality and glazing with oil puttyin sqm n exc 0.5 sqm in each pane complete all as specified and directed.

M&L for 20 mm thick Granite (of any type of coloured) tiles maxhine cut in skirting/dado laid over cement screed and jointed with grey cement slurry ,and pointed with grey cement slurry ,and pointed with white cement with adimixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete.

S&F, in repair, vitreous china table top wash basin, white, flat back of size 550mm x 400mm including grouted in cement mortar 1:2 on Granite top supported on RCC slab complete all as specified and directed. Note :- Supply only pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately. Make : Cera (Brand Coyal/Corba/canal) or equivalent as approved by Engr-in-Charge.

M&L in repair 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Excavation in trenches, n.exc 1.5 Mtr wide & n.exc 1.5 Mtr depth for foundation, etc, or for shafts, wells, casspits, manholes, pierholes etc. n. exc 10 sqm on plan & n. exc 1.50m in depth and getting out in soft and loose soil complete all as specified & directed.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation of pole,laying of cables etc in Hard and dense soil and getting out.

M&L for returning, filling in, including spreading, levelling, watering and well ramming the approved soil in layers n.exc 25cm thick complete all as specified & directed.

M&L for providing dry river sand as in sand cushioning to UG cable including punning gently all as directed. Note : Depth after punning shall be measured and paid.

Removal of surplus excavated soil to a distance n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above starting point complete all as specified & directed.

S&F in repair PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75mm dia cowls complete all as specified and directed.

S&F in repair PVC (SWR) bends 110mm dia any radius all as specified and directed.

S&F in repair PVC (SWR) bends 75mm dia any radius as in repair all as specified and directed.

S&F in repairs 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-125gms).

Cleaning of solid/liquid mud deposited in underground sewage lines, 100/150mm dia bore of any type at any depth, between consecutive manholes, by manual rodding, through connecting manholes, getting out all foreign matter such as solid/ liquid mud etc. complete including removal & refixing of covers, complete all as specified and directed.

S&F in repair for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.

Supply and fixing in repairs SS Jet spray with flexible pipe 15mm dia not less than 1.50 mtr long complete all as specified and directed.

S&F for Frosted glass ordinary quality 4 mm thick and glazing with rubber and aluminium beading in square n.exc 0.5 sqm in each pane in repair complete all as specified and directed.

S&F in repairs Two way bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

S&F in repairs for Continuous (Piano) hinges 30 mm , mild steel, bright finish or electro-galvanised fixed in cupboard/kitchen cabinet as in repair complete all as specified and directed.

Supply and fixing in repairs hasp and staple 100mm size ( ISI Marked), safety type aluminium anodized including bolt to hinge plate, fixed as in repair all as specified and directed.

S&F in repairs of magnet catches in cupboard/ kitchen cabinet to receive shutter and fixed with including fittings complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified

Supply only Liquid water proofing compound ( ISI Marked) complete all as specified and directed.

Supply and fixing in repairs plastic water closet seat any colour, closed pattern with recessed bottom and cover with hinging device complete all as specified and directed.

Taking down carefully top covers of EWC and refixing the same after straightening, aligning etc complete all as specified and directed.

S&F for PVC waste pipe 32 mm to 40 mm dia size of adequate length (minimum length 60cms) suitable for WHB/Sink with PVC adapter fixed in repairs complete all specified and directed

S&F in repairs for Brass chromium plated waste couplings of dia 32 mm for WHB fixed complete all specified and directed

S&F in repairs 40 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F in repairs aluminium peg set of Six complete all as specified and as directed.

S&F in repairs PVC water tank covers of capacity exc 250 Ltrs not exc 500 Ltrs complete all as specified and directed.

Taking down chokhats or frames (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4.00 sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Taking down chokhats or frames (without taking off shutters from the frame) n.exc 1.50 sqm including cutting holes and making good reqd shape for hold fast block for new frame complete all as specified directed.

Taking down shutters of any description exc. 1 Sqm and nexc. 2 Sqm each and Ditto

S&F, 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

S&F for 32mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as directed and specified.

S&F for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in repair complete all as directed and specified.

S&F for 30mm thick Glazed and skeleton shutters, of 2nd class Hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified directed

M&L for preparation of new or previously steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparing new wood & wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

M&L preparing old wood & wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M&L for preparation of old steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying one coat of synthetic enamel paint complete all as specified and directed.

S&F for Pressed steel frames for doors (125X60mm) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified directed

S&F for Pressed steel frames for doors (105X60mm) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified directed

M&L Second class hard wood Plain solid straight chowkat and frame rebated on the solid rounded or chamfered put together with glue and pinned at jounts complete all as specified and as directed.

S&F standard aluminium section powder coated any colour as approved for Door/ window/ventilator frames/three track shutters sliding/ partitions etc including jointing cleat and rubber eading/linning, Pivot ,locking aragement and all hardware etc and fixed in position with stainless steel screws all as specified and as directed.

S&F for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. M S frame shall be covered with heat moulded plain coloured PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain coloured PVC sheet for top rail, lock rail and bottom rail; panelling of plain coloured PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with 5mm x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm on exposed side of shutter. Note- Door shall be fabricated by authorized dealer of M/S Rajshree Indore using PVC sheet manufactured by M/S Rajshree Indore.

S&F for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawings including all fixtures shown on drawings. Make for materials : Rajshree Doors or equivalent as approved by GE. Note:-(i) Frames shall be fabricated by authorized dealer of M/S Rajshree Indore using PVC sheet manufactured by M/S Rajshree Indore. (ii) Provision of tie rod in shape of internal MS tube or round bar etc of any size adequate to keep the chowkhat in true position shall be provided before covering the frame with PVC sheet at workshop. For the purpose of measurement & payment length of chowkhat without tie rod shall be measured.

S & F Butt hinges 100 mm, extruded aluminium alloy with galvanized mild steel hinge pin, anodised of type C-21 and complete all as specified and as directed.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, fixed to steel frames with and including welding etc complete all as specified.

S&F 200mm aluminium anodised barrel tower bolts of extruded section all as specified.

S&F 150mm aluminium anodised barrel tower bolts of extruded section all as specified.

S&F 300mm aluminium anodised sliding door bolt of extruded section all as specified

S& F 150 mm extruded aluminum alloy handles, fabricated type anodised.

S&F in Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring 150 mm long complte all as specified

Repair to wall mixer by replacing washer including taking down and refixing complete all as specified and directed.

Repair to leakage/ sepage from toilet by tightening and refixing of joints of CI/GI pipe with solvent/ M- seal of including taking down and refixing existing false ceiling and making good the disturbed surface complete all as specified and directed.

Repair to float valve of over head tank any size by adjusting/refixing ball and rod or by tightening and refixing complete all as specified and directed.

cleaning and removing of tank of capacity n exc 500 litrs, all scale and dirt, etc, from tanks and from mouth of circulating pipes, etc and hoisting if required reconnecting and refixing in position and including one coat synthetic enamel paint on tank of size 450mmx300mm and writing letters ("CLD ON MM-YY") of height 7.5cm complete all as specified and as directed.

cleaning and removing of tank of capacity exc 500 and n exc1000 litrs, all scale and dirt, etc, from tanks and from mouth of circulating pipes, etc and hoisting if required reconnecting and refixing in position and including one coat synthetic enamel paint on tank of size 450mmx300mm and writing letters ("CLD ON MM-YY") of height 7.5cm complete all as specified and as directed.

S&F kitchen plate rack of stainless steel S 304 of size 1200mm x 950mm x 230mm made out of 1mm thick steel sheet complete all as specified and directed.

M&L cutting out cracks to V-section in existing roof slab or terrace, cleaning out, wetting, grouting, with cement sand slurry in 1:3 with mixing of WPC @ 2% by wt of cement.

Taking/removing existing tar felt treatment of any description from RCC roof slab, terrace etc by means of MS scrapper patty or any other suitable tools and removing to a distance 500 mtr from the starting point and depositing as directed.

M&L for 25mm thick cement concrete type B-0,1:2:4 (12.5 mm graded aggregate) for roof padding finishing cement concrete surface even and smooth with out using extra cement

M&L for Providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application after cleaning the surface completely to eliminate all sharp portion over 10 mm thick screed bed in CM (1:4) mixed with WPC @ 3% of weight of cement or as per manufacturers instructions, including removing old APP membrane, and applying a coat of aluminium paint complete all as specified.

M&L for sunken floor treatment as described as under (i) to (vii):- (i) Demolition of cement concrete of any description and in any position not otherwise specifically Provided or in any type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (ii) M&L to fill the sunken floor with PCC (1:5:10) type E-2 using Brick aggregarte over the treated surface complete as directed . (iii) M&L 40mm thick (Min) PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate with integral water proofing compound as per manufacture instruction instructions on bottom of sunken portion with proper slope towards spout . Vertical sides shall be plastered in CM (1:3) 15mm thick mixed with water proofing compound as per manufacturer instructions .Plaster shall be extended over PCC coving when the same is green i.e. PCC & Plastger be carried out at the same time complete all as specified and directed. (iv) After laying sewage /Plumbing pipes with fixtures in position 2 coats of OMIPLAS EP -101 epoxy compound shall be applied complete all as specified and directed. (v) Spouts of 25mm dia GI pipe light grade projecting 450 mm clear of face outer a wall with mosquito proof cap on inner face of pipe shall be provided to drain out seepage water including cutting holes and making good if needed as specified and directed . (vi) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defects complete all as specified and directed .the sunken portion shall be tested for leakage /seepage /dampness by pounding with water for 72 hours .in case any defect is noteced the portion shall be grounted with cement slurry mixed with suitable chemical & tested again .The process of grouting and testing shall be repeated till leakage /seepage /dampness is eliminated as specified and directed.

Taking out sub class burnt bricks from the trenches and stacking at site serviceable /unserviceable bricks for reuse.

Laying only sub class brunt bricks as cable protection cover all as directed.

Supply and laying sub class old 'B' burnt bricks laid as cable protection cover complete all as specified and directed.

S&F, in repair, GI pipe, 40mm bore, light grade, laid below road/fixed along the poles / walls with necessary clamping, etc complete all as per specified and directed.

Taking out the existing PVC/XLPE, 1100 volts grade, LT UG electric cable of size 6 sqmm x 2 core with glands, cable protection pipes, cable route indicator etc., complete from the trenches/fixed on wall (or) passing through pipes/in floor removing the unserviceable fault cable and carefully stacking the serviceable cable for reusing all as specified and directed by the Engr-in- charge Note:- Excavation and Earth work shall be measured and paid separately under appropriate items all as per existing make

All as per item No 11 above but 10 Sqmm 2 core

All as per item No 11 above but 10 Sqmm 4 core

Supplying & laying, XLPE insulated PVC inner sheathed, 6 Sqmm, 2 core, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed.

All as per item No 14 above but cable of size 10 sqmm 2 core .

All as per item No 14 above but cable of size 10 sqmm 4 core .

M&L Painting to steel tubular poles LT of 8.5/9Mtr long incl fittings and fixtures complete, fixed with poles with one coat of alluminium paint incl scrapping of rusts and preparation of surfaces and writing Numberfrom white enamel paint of 10 cm height including circular back ground with black enamel paint of two coats incl white circular border over steel/RCC surfaces of electric poles.etc., complete all as specified and as directed by Engr-in-Charge.

Taking down existing LED light fitting 25/45/70/90 W from LT poles ,cleaning of prismatic polycarbonate cover, remove the corban and reconected to ACSR conductor by using new aluminium service wire 2.0 mm from conductor to LED street light all as specified and directed

Taking down and refixing existing LED light fitting from LT poles, removed LED driver and ,Supply & fix new electronic driver assembly for LED street light fitting of 25 watt all as specified and directed

Taking down and refixing existing LED light fitting from LT poles, removed LED driver and ,Supply & fix new electronic driver assembly for LED street light fitting of 45 watt all as specified and directed

Taking down and refixing existing LED light fitting from LT poles, removed LED driver and ,Supply & fix new electronic driver assembly for LED street light fitting of 70 watt all as specified and directed

Taking down and refixing existing LED light fitting from LT poles, removed LED driver and ,Supply & fix new electronic driver assembly for LED street light fitting of 95 watt all as specified and directed

S&F, in repair, FRP insulated and PVC sheathed copper conductor cable of size 1.5 Sqmm, 3 core, 1100 volts grade, multistranded, passing throuth existing pipe, fixed on pole/wall from juntion box to street light fitting complete all as specified and directed. including taking down old

S&F, in repair, LED flood light luminaire of 210watts with high pressure die cast housing with IP-66, power coated with gray colour finish, prismatic polycarbonae cover with LED lenses complete all as including taking down old Make - Bajaj or Chrompton/Havells/Philips all as specified and directed.

S&F, in repair, LED flood light luminaire of 170watts with high pressure die cast housing with IP-66, power coated with gray colour finish, prismatic polycarbonae cover with LED lenses complete all as including taking dowo old Make - Bajaj or Chrompton/Havells/Philips all as specified and directed.

S&F, in repair, LED flood light luminaire of 120 watts with high pressure die cast housing with IP-66, power coated with gray colour finish, prismatic polycarbonae cover with LED lenses complete all as including taking dowo old per Make - Bajaj or Chrompton/Havells/Philips as all specified and directed

S&F, in repair, LED flood light luminaire of 100 watts with high pressure die cast housing with IP-66, power coated with gray colour finish, prismatic polycarbonae cover with LED lenses complete all as including taking dowo old per Make - Bajaj or Chrompton/Havells/Philips as all specified and directed

S&F, in repair, LED flood light luminaire of 50 watts with high pressure die cast housing with IP-66, power coated with gray colour finish, prismatic polycarbonae cover with LED lenses complete all as including taking dowo old per Make - Bajaj or Chrompton/Havells/Philips as all specified and directed

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant including taking dowo old complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete withIP 66 protection

Supply and fixing LED street light fitting 45 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant including taking dowo old complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete withIP 66 protection

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant including taking dowo old complete with driver, lamp bracket with impactand corrosion resistant including thermalmanagement in multiple optics complete withIP 66 protection complete

Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant including taking dowo old complete with driver, lamp bracket with impactand corrosion resistant including thermalmanagement in multiple optics complete withIP 66 protection complete

S&F, in repair, PVC junction box, factory made, size 180x290x110mm with one No SP MCB of 06 Amp rating, class-B and 3 Nos connector fixed on pole with necessary clamps and bolts etc and connecting with street light cable including taking dowo old complete all as specified and directed.

S&F, in repairs, bracket made out of light grade, Galvanised steel tube, 35 mm bore, 1.2 Mtr length, bent to 120 degree for fixing street light fitting at the top, fixed to pole with necessary clamps made out of FI 40mm x 4mm with nuts & bolts including preparation of steel surfaces & apply two coat of synthetic enamel paint over red oxide prime rincluding taking dowo old complete all as specified and directed.

S&F, in repairs, bracket made out of light grade, Galvanised steel tube, 40mm bore, 1.2 Mtr length, bent to 120 degree for fixing street light fitting at the top, fixed to pole with necessary clamps made out of FI 40mm x 4mm with nuts & bolts including preparation of steel surfaces & apply two coat of synthetic enamel paint over red oxide prime rincluding taking dowo old complete all as specified and directed.

S&F, in repair, Round circular of 40mm dia light grade GI pipe dia meter of circle not less then 1.5m suitable for fixing in top of 9 meter steel tubler pole with all nuts bolts , clamp,cross chanel and circular cap for fixing of pole suitable for fixing three nos flood light all as specified and directed

Supply, installation, commissoning and testing, in repair street light timer panel along with Conforms to IS/IEC 60947-4-1, Provided with Protection Degree IP 54 Extended wide band coil FRLS (Fire retardant low smoke) Internal wiring In-built Short-Circuit Protection with Digital 24 hour timer-01 no,Contactor Rating (A) 32 / TP40 / TPN-01no as per havells Cat part no IHXTS03060 or equivalent to L&T/ C&S/ ABB all as specified and directed

Supply, installation, commissoning and testing, in repair street light Time switch analog time switch,with Conforms to single phase, 230 volts with 24 hours time setting, current rating 16 Amps as per Havells, ABB/ Seimens/ C&S

Supply, installation, commissoning and testing, in repair street light AC relay type ML-3 and with MCB TPN, C curve 32 Amp, three phase,Make Havells/ L&T/ABB/ or equivalent to other make all as specified and directed

Supply and fixing post top lantern LED type 20watt 230 watt volts AC outdoor type with decorativepost top for 360 degree indirect light IP 65 protectionwith impact and corrosion resistant complete withdriver and lamp including taking down old one complete.make havells cat part CORALMINIPT25WLED 757PSYMTOPC or equvalent Bajaj/Chrompton /wipro / Philips

Taking down and refixing existing LED light fitting from bolard light , removed LED driver and ,Supply & fix new electronic driver assembly for LED bolard light fitting of 5 to 10 watt all as specified and directed

S& F 25 cm dia garden dome light with milky colour unbreakable PVC holder type B22 with out LED Bulb water proof fixed on existing GI pipe with same shape all as directed by Engr-in-Charge including taking down old

S&F LED Solar street light fitting battery suitable for 25 Watt with high efficiency ,lithium ferro phosphate battery with in built ,all as fixing as existing light complete all as specified and directed .make Havells/ bajaj/philips or equivalent

Supply and fixing path directional reflector with PC diffuser and aluminium power coated bollard provided uniform illumination for pathways LED type 9 watt 230 watt volts AC outdoor type with decorativepost for 360 degree indirect light IP 65 protectionwith impact and corrosion resistant complete withdriver and lamp including taking down old one complete complete.make havells/ Bajaj/Chrompton /wipro / Philips

Singh Engineer And Contractor (BID ID -3402389)

Bhumi Construction (BID ID -3413602)

ALBA AC AND REF SERVICES (BID ID -3413997)