Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.7 CrAccepted-AOC | ₹3.7 Cr | L1 | Accepted-AOC Lowest |
| 2 | L2₹4.0 Cr+₹22.3 L (5.97%)Rejected-Finance | ₹4.0 Cr+₹22.3 L (5.97%) | L2 | Rejected-Finance Other than lowest |
| 3 | Rejected-Technical | - | - | Rejected-Technical As per selection performa attached |
| 4 | Rejected-Technical | - | - | Rejected-Technical As per selection performa attached |
| Sl No | Description | Qty | Unit | SATVIR GUPTA ENGINEER and CONTRACTOR L2 | MOOL RAJ SHARMA L1 |
|---|---|---|---|---|---|
| 1.00Sch 'A' Part-I (Building Work):-This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as "Rs. 0.00" under col.5 signifies this fact only. | |||||
| 1.01 | Construction of block of Administrative Building complete all as shown on drawings and as specified. | 1 | Each Block | 2,99,00,000 ₹2,99,00,000 | 2,75,00,000 ₹2,75,00,000 Lowest |
| 1.02 | Construction of block of Single JCO Accommodation complete all as shown on drawings and as specified. | 1 | Each Block | 27,50,000 ₹27,50,000 | 26,50,000 ₹26,50,000 Lowest |
| 1.03 | Construction of block of Covered Accn for Veh and Ancillaries including ramp complete all as shown on drawings and as specified. | 1 | Each Block | 21,50,000 ₹21,50,000 | 21,00,000 ₹21,00,000 Lowest |
| 2.00 | Total Amount of Sch 'A' Part - II (Site Clearance) | 1 | Lump sum | 75,043.5 ₹75,043.5 | 75,000 ₹75,000 Lowest |
| 3.00 | Total Amount of Sch 'A' Part - III (Internal Water Supply Work) | 1 | Lump sum | 1,00,000 ₹1,00,000 | 85,000 ₹85,000 Lowest |
| 4.00 | Total Amount of Sch 'A' Part - IV (Internal Electric Supply Work) | 1 | Lump sum | 5,79,583.11 ₹5,79,583.11 Lowest | 5,80,000 ₹5,80,000 |
| 5.00 | Total Amount of Sch 'A' Part - V (Plumbing Work) | 1 | Lump sum | 4,32,114.05 ₹4,32,114.05 Lowest | 4,57,000 ₹4,57,000 |
| 6.00 | Total Amount of Sch 'A' Part - VI (Area Drainage Work) | 1 | Lump sum | 7,05,729.28 ₹7,05,729.28 | 7,05,729 ₹7,05,729 Lowest |
| 7.00 | Total Amount of Sch 'A' Part -VII (Sewage Disposal Work) | 1 | Lump sum | 1,74,184.15 ₹1,74,184.15 | 1,70,000 ₹1,70,000 Lowest |
Tender Value
₹3.2 Cr
EMD Value
₹4.0 L
Closing Date
29 Jul 2025, 6:00 pmClosed
Chief Engineer Udhampur Zone
HQ Chief Engineer Udhampur Zone PIN 900386, C/O 56 APO
PROVN OF OFFICE COMPLEX AND JCO ACCN AT RAJOURI
2025_MES_710459_1
87911-A/E8
Open Tender
Civil Works
Lump-sum
545 days
Rajouri
As per NIT
8 documents required · 8 mandatory
₹2,000
Yes
GE 862 EWS
₹4.0 L
Yes
HQ Chief Engineer Udhampur Zone
29 Nov 2025
27 May 2025
5 Aug 2025
27 May 2025
29 Jul 2025
17 Jul 2025
28 May 2025 - 10 Jun 2025
12 Jun 2025
Amount
Sch 'A' Part-I (Building Work):-This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as "Rs. 0.00" under col.5 signifies this fact only.
Construction of block of Administrative Building complete all as shown on drawings and as specified.
Construction of block of Single JCO Accommodation complete all as shown on drawings and as specified.
Construction of block of Covered Accn for Veh and Ancillaries including ramp complete all as shown on drawings and as specified.
Total Amount of Sch 'A' Part - II (Site Clearance)
Total Amount of Sch 'A' Part - III (Internal Water Supply Work)
Total Amount of Sch 'A' Part - IV (Internal Electric Supply Work)
Total Amount of Sch 'A' Part - V (Plumbing Work)
Total Amount of Sch 'A' Part - VI (Area Drainage Work)
Total Amount of Sch 'A' Part -VII (Sewage Disposal Work)
Total Amount of Sch 'A' Part - VIII (External Water Supply Work)
Total Amount of Sch 'A' Part - IX (External Electric Supply Work)
Total Amount of Sch 'A' Part -X Rain Water Harvesting Work)
Sch 'A' Part - XI (Misc Items of work) Note : This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as "Rs. 0.00" under col.5 signifies this fact only.
LLDPE septic tank designed to carry sewage and sludge water, comprising earth work , excavation, returning filling, disposal of surplus spoils to a distance not exc 50 mtr from starting point in any type of soil, PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate), as in foundation, 200mm thick, vent shaft, connections etc.for 30 users (2000 litres) including all fittings, fixtures, testing on completion, complete all as specified.
Soakage well 2.4m dia and 3m deep (Brick Construction) below inlet pipe level (depth from inlet pipe to ground level 45cm) complete all as shown on drawing No. CEUZ/TD/1585/21, sheet No. 1/4 to 4/4 and as specified.
Trial bore of 250mm dia upto 200m depth below ground level in any kind of soil strata including hard stone/boulder including electric logging, MS cap, MS flat iron clamps, reducing socket etc., complete all as specified and directed.
Frost free refrigerator with new smart connect technology,smart invertors compressor & smart diagnosis system electric driven (single phase) having normal gross storage capacity of 185 litres single door with ecofriendly refrigerant of minimum 5 star ratings with Ice bear door cooling, auto stabilizer about at voltage 100V-290 V, complete all as specified and directed.
Voltage stabilizer for automatic operation, single phase naturally air cooled indoor wall mounted type & designed for input variation between 120 volts to 280 volts with auto voltage stabilized at 20 volts with accuracy of ± 2.5% and of capacity 0.5 KVA complete all as specified and directed.
Point wiring for One light/fan point/call bell point controlled by one way switch 5 Amp with 1.5 Sqmm single core multi standed copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including earth wire with cable of size 1.5 sqmm copper conductor FRLSH insulated, drawn into and including concealed in PVC conduit of not less than 20mm dia and 1.5mm wall thickness (ISI marked) terminated into annealed steel terminal boxes including modular plate and cover for mounting modular switch/ socket switches, sockets, fan regulators etc complete all as specified and directed.
All as per Srl item No. 17 above but one light controlled by two way switch.
All as per Srl item No. 17 above but for one 3 pin 5 Amp socket on same board.
All as per Srl item No. 17 above but for one 3 pin 5 Amp socket on independent board.
All as per Srl item No. 17 above but with 2.5 sqmm copper conductor for 15 Amp socket with 2.5 sqmm earth continuity copper conductor.
Supply, fixing and comminssioning of water cooler, fully stainless steel, electric driven single phase having 80 litre storage capacity and nominal cooling capacity of 40 Ltrs per hour with high efficient compressor, unique in situ PUF insulation, CFC free refrigerant copper tubes with rippled aluminium fins, stailess steel faucets PVC pipe connections complete all as specified and directed.
Voltage stablizer for automatic operation, single phase naturally air cooled, indoor type and designed for input variation between 130V to 280V with output voltage stablised at 204V with accuracy of (± 2.5%) and of capacity 1KVA , complete all as specified and directed.
Supply, installation, testing and commissioning of totaly enclosed LT electric panel outdoor type (IP-55) fabicrated out of 3.15mm thick CRCA sheet dust and vermin proof powder coated double door type independent cabin including locking arrangement for each MCCBs, bus bar chamber enclosed complete suitable for operating on 415 Volt 50 HZ, AC supply internally wired with copper conductor/strip of adequate size from main incoming MCCB to bus bar and bus bar to outgoing MCCB/MCBs having legs 45cm made out of 65mm x 65mm x 6mm angle iron grouted on brick masonary platform upto 30cm. Brick masonary platform should be 30cm above the ground level, comprising the following:- (a) MCCB 200 Amp, FP, 36KA, 415 volts, 50Hz - 01 No. (Incoming). (b) MCCB 63 Amp, FP, 16KA, 415 volts, 50Hz - 03 No. (Outgoing). (c) MCB 40 Amps, FP, 10KA, 415 volts, 50Hz - 01 No. (Outgoing). (d) Digital voltmeter with VSS-01 set. (e) Digital ammeter with CTs-01 set. (f) LED phase indication lamps RYB-01 set. (g) Aluminium bus bar TPN 400 Amps rating-02 No.
Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6.0mm thick buried directly in ground ( earth pit not less than 2.25 mtr below normal ground level ) with top edge plate not less than 1.5 metre below normal ground level connected to galvanized earth strip of size 32x6mm as earthing lead by means of bolts, nuts, chuck nuts and washers of galvanized iron earth lead with 15 cm thick alternate layers of charcoal dust & common slat including PCC pit in PCC 1:2:4 type B-1, RCC cover made out of cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with TMT steel bars 8 mm dia @150 mm c/c both ways with suitable handle and angle iron 40 x 40 x 5 mm frame, GI medium grade watering pipe 20 mm bore with funnel, wire mesh at top including light grade protection pipe 40mm bore up to main board complete as shown on electrical plate No 3 of MES Sch 2009 (Part-I) and testing on completion complete all as specified and directed. Note: - On testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction.
Brick masonry valve pit of size 60cmx60cmx60cm (internal dimensions) including all necessary excavation and earth work in any type of soil, returning, filling in, disposal of surplus spoil to a distance not exceeding 50m and depositing where directed, PCC in foundation of the mix 1:3:6 type C-2 (using 40mm graded crushed stone aggregate),brick masonry in Cement Mortar 1:4, 10mm thick, coping type B-1 (1:2:4) (20mm aggregate), internally finished even and fair and pointing flush externally as the work proceeds in the same mortar, MS angle iron 50x50x 6mm frame Mild steel sheet cover 3mm thick with handle & locking arrangement and painting all the exposed MS work with two coats of synthetic enamel paint of the tint as approved by the GE over a coat of red oxide primer and painting all the MS embedded in PCC with two coats of black bituminous paint, complete all as specified and as directed by Engr-in-charge.
Cutting the existing 50mm tubing and inserting new GI Tee of size (50 x 50 x 50)mm dia and including necessary screwing threading, tail pieces, short pieces, jointing material etc; complete all as specified and directed.
Cutting the existing 50mm tubing and inserting new GI Tee of size (50 x 50 x 20)mm dia and including necessary screwing threading, tail pieces, short pieces, jointing material etc; complete all as specified and directed.
Perforated UPVC 200mm dia pipe, in any length, complete all as specified and directed
Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, 240 Volts, complete all as specified and as directed.
Recessed mounted 1x1 luminaire with 12W LED complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and directed
Surface mounted 1x1 luminaire with 10W LED complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and directed
Surface industrial batten tube light 20W LED complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size, complete all as specified and directed
LED bulb 10 Watt lumen not less than 770 lumen complete all as specified and directed.
LED Red & Green light lumen not less than 770 lumen complete all as specified and directed.
Lumainaire engagement light complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed.
Sub main wiring with two run of single core FRLSH PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 4.0 Sqmm drawing through and including concealed rigid non metallic PVC conduit medium grade (ISI marked) 20mm dia or above as required including one single core FRLSH PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 4.0 sqmm as earth continuity conductor connected to commen earth and earth dolly complete all as specified and directed. Note : - Two run of single core copper conductor cable and one run of single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit only.
Sub main wiring with two run of single core FRLSH PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 10 Sqmm drawing through and including concealed rigid non metallic PVC conduit medium grade (ISI marked) 20mm dia or above as required including one single core FRLSH PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 10 sqmm as earth continuity conductor connected to commen earth and earth dolly complete all as specified and directed. Note : - Two run of single core copper conductor cable and one run of single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit only.
Sub main wiring with two run of single core FRLSH PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 16 Sqmm drawing through and including concealed rigid non metallic PVC conduit medium grade (ISI marked) 20mm dia or above as required including one single core FRLSH PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 16 sqmm as earth continuity conductor connected to commen earth and earth dolly complete all as specified and directed. Note : - Two run of single core copper conductor cable and one run of single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit only.
Electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW, capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc; complete all as specified and as directed.
SATVIR GUPTA ENGINEER and CONTRACTOR (BID ID -3376229)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .