Providing, Installation and commissioning of 1.5_2.0 TR Split Type High Wall Air Conditioning Machines in the different Court rooms in the District Judiciary under the District and Sessions Judge, Gomati District, Udaipur during the year 2022 23

Amount

Providing in/c testing and commissioning of Split type High wall 1.50 TR (4,500 Kcal/ hr. ± 2 %) split A.C. Machine with Inverter Compressor technology operating on non-CFC refrigerant (R-410A/R-32/equivalent refrigerants) suitable for wall mounting conforming to IS:1391 (Part-II) specification (Evaporator & Condenser must have copper pipe) suitable for operation on 230 volt +- 10%, not less than 3 (Three) Star rating (2019 Standard), 50Hz, Single Phase AC Supply capable of performing a) Cooling b) Dehumidifying c) Air Circulation d) Filtering as per direction of the Engineer-in-Charge

Providing of Split type High wall 2.00 TR (6,000 Kcal/ hr. ± 2 %) split A.C. Machine with Inverter Compressor technology operating on non-CFC refrigerant (R-410A/R-32/equivalent refrigerants) suitable for wall mounting conforming to IS:1391 (Part-II) specification (Evaporator & Condenser must have copper pipe) suitable for operation on 230 volt +- 10%, not less than 3 (Three) Star rating (2019 Standard), 50Hz, Single Phase AC Supply capable of performing a) Cooling b) Dehumidifying c) Air Circulation d) Filtering as per direction of the Engineer-in-Charge.

Standard installation of 1.5 TR/2.00 TR capacity High Wall Split type type Air Conditioner with3 pin 16 Amp Top in/c repairing of drilled wall by cement mortar, painting In/c necessary insulation of copper pipes etc. complete as per direction of the Engineer-in-Charge.

Supply and installation of additional length of copper pipe of suitable diameter for suction and liquid line between indoor and outdoor units (for 1.5 TR & 2 TR ac) beyond the standard length as per direction of the Engineer-in-Charge.

Fabrication of M.S. platform for placement of condensing unit by using M.S. angle of (50x50x5) mm size base plate, nuts & bolts or cradle of suitable sizes or suitable creadle i/c painting, fitting, fixing grouting by cement mixer as per direction of the Engineer-in-Charge.

Providing hard PVC pipe of best quality of 25 mm diameter including necessary clamping and fitting for draining of condensate water from indoor unit as per direction of the Engineer-in-Charge.

Providing and connecting Electric Control cables between MCB to indoor/outdoor. 3C X 2.5 Square mm Copper Cable..

R.P.ELECTRONICS (BID ID -142684)

Eastern Commerce (BID ID -142757)

STANDARD ELECTRONICS (BID ID -142658)