PERIODICAL SERVISES TO OTM ACCN MISC SERVICES AND EXTERNAL PAINTING ALLIED MAINT WORK AT WAR CENTER UNDER THE AREA OF AGE B R II AREA OF GE A NO 1 JODHPUR

Amount

M&L for preparation of old decorated wall surfaces plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, including cornices etc and applying one coat of white wash on wall, complete all as specified and directed.

All as per item No. 1.00 here-in-above, but as on ceiling surfaces

All as per item No. 1.00 here-in-above, but colour wash

All as per item No. 1.00 here-in-above, but cement base paint

All as per item No. 1.00 here-in-above, but two coats of cement base paint

All as per item No. 1.00 here-in-above, but oil bound distemper

All as per item No. 2.00 here-in-above, but oil bound distemper

Preparing new plastered or unplastered surfaces or old decorated surface of wall and applying two coats of oil bound distemper over & including one coat of primer on walls complete all as specified and as directed.

Complete removal of existing treatment of any description of wall surfaces and applying with wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over & including one coat of primer on walls complete all as specified and as directed.

Preparing new plastered or unplastered surfaces or old decorated surface of wall and applying two coats of exterior plastic emulsion over & including one coat of primer on walls complete all as specified and as directed.

Preparing new plastered or unplastered surfaces or old decorated surface of wall and applying two coats of interior plastic emulsion over & including two coats of wall care pitty on walls complete all as specified and as directed.

Complete removal of existing treatment of any description or new plastered or unplastered surfaces of wall surfaces and applying with 2 mm thick wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed.

M & L for preparation of old painted wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and as directed .

All as per item No. 13.00 here-in-above, but two coats of synthetic enamel paint

All as per item No. 13.00 here-in-above, but steel surfaces.

All as per item No. 15.00 here-in-above, but two coats of synthetic enamel paint

M&L writing or painting of letters or figures ( Block, Roman, Italian or Indian) n. exc. 30 cm high complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished surface even and smooth without using extra cement, complete all as specified and as directed.

M&L 15 mm thick rendering in cement mortar 1:4 on fair faces of stone or brick work or concrete surfaces mixed with water proofing compound as per manufacturer instructions and finished the surfaces even and smooth with out using extra cement complete all as specified and as directed. Note :- WPC will be measured and paid seperately.

M&L 10 mm thick rendering in cement mortar 1:4 on fair faces of stone on concrete surfaces of ceiling mixed with water proofing compound as per manufacturer instructions and finished the surfaces even and smooth with out using extra cement complete all as specified and as directed. Note :- WPC will be measured and paid seperately.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.

M&L 75 mm thick PCC 1:4:8 type D-2 using 20mm graded crushed stone aggregate, as in sub base of floor incld. compaction properly & universal and laid to level, complete all as specified and directed.

Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any description, ( colour, design & pattern, & size/ shape, as approved by GE) as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

Supply and laying machine / factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.

Supply only integral water proofing compound (ISI marked).

Demolition of reinforced cement concrete of any description for Chajja , railing, ladder , facia , manhole cover, colums , self slab of type, other places etc complete all as specified and directed.

M&L for rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, bracket for sunshade etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars ,barred iron doors; ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming to Fe-290Gde E-165 complete all as specified and as directed.

M&L preparation of new or previously untreated steel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over & including M&L single coat of red- oxide, zinc chrome primer complete all as specified and as directed.

Taking down carefully cement conc /spalled out concrete from RCC roof projections, cilinigs ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc., and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.

S&F in replacement TMT bars 12 mm dia fixed by way of stitching ( welding ot tieing with existing reinf) incl drilling holes etc & securing ends in walls etc ,complete all as specified and as directed.

M&L for cleaning the existing reinf of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface.,complete all as specified and as directed.

M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack.,complete all as specified and as directed.

M&L for 15 -20 mm thick rendering in CM (1:1:2) using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat. ,complete all as specified and as directed.

M&L for 5 mm thick rendering in CM 1:3 & finishing the surface even & smooth w/o using extra cement ,complete all as specified and as directed.

M&L for MS hard drawn steel wire fabric cut to length, bent to shape & fixed in reinforcement to slabs cut n. exc. 400 Kg/Sqm fixed with nails etc on underside of RCC slabs etc complete all as directed at site.(for slab portion). ,complete all as specified and as directed.

M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth complete all as directed at site ,complete all as specified and as directed.

S&F GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjas/fascias etc,complete all as specified and as directed.

M&L stone slab 4 cm thick dressed true and square, in one length not less than 60cm and n. exc 200cm, as in window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints, exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and as directed

M&L for prefabricated, pre moulded/reinforced, 100 to 125 mm strip wide POP moulded cornices/moulding, fixed on ceiling/wall, including of scaffolding, complete all as specified and directed.

S&F in repair Aluminium (Die cast) body Door closer hydraulically regulated, designation No 3 universal type,suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.

S & F in repair double action floor spring hydraulically regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

S&F in replacement Rimless Single Piece EWC Size: 395x710x730 mm, with UF Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set,etc complete, S Trap- 300 mm Make Jaquar Cat No. VGS-WHT-81853S300UF or equivalent model in Hindware/Parryware as approved by GE.

M&L in replacement 6 mm thick high quality looking mirror Swivel fancy type fixed to wall with chromium plated screw with cup washers etc complete all as specified and as directed Make Jaquar Cat No. ACN-1195N or equivalent model in Hindware/Parryware as approved by GE.

S&F in replacement decorative type curtain rod stainless steel finish of pipe 22 to 25mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end, complete all as specified and as directed.

MS chromium plated peg set of five fixing with wall complete

S&F in replacement stainless steel single Towel rail 600mm long, complete all as specified & direceted Make Jaquar Cat No. ACN-1111SM or equivalent model in Hindware/Parryware as approved by GE.

S&F in replacement stainless steel Towel rack 600mm long, complete all as specified & direceted Make Jaquar Cat No. ACN-1181 FS or equivalent model in Hindware/Parryware as approved by GE.

S&F in replacement stainless steel Towel Ring Round with Round Flange, complete all as specified & direceted Make Jaquar Cat No. ACN-1121BN or equivalent model in Hindware/Parryware as approved by GE.

S&F in replacement stainless steel Toilet Roll Holder with Stainless Steel Flap, complete all as specified & direceted Make Jaquar Cat No. ACN-1153S or equivalent model in Hindware/Parryware as approved by GE.

Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.

All as per item No 52.00 here-in-above, but size of pipe 15 mm bore.

S&F of water GI tubing medium grade, galvanized, with all fittings fixed to wall, ceilings or laid n floors, complete all as specified and as directed. (a) 25 mm bore,

All as per item No 53.00 here-in-above, but size of pipe 15 mm bore including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc., complete all as specified and as directed.

S&F in replacement 25 mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete complete all as specified and directed.

S&F in replacement bib cock with wall flange, chromium plated brass, fancy type 15mm dia complete all as specified and as directed. Make : Jaquar Cat No. KUP-35037PM or equivalent in Kohler/ Cera as approved by GE

S&F in replacement angular stop cock with wall flange, chromium plated brass, fancy type 15mm dia complete all as specified and as directed. Make : Jaquar Cat No. KUP-35053PM or equivalent in Kohler/ Cera as approved by GE

S&F in replacement Central Hole Basin Mixer with Popup Waste System with 450mm Long Braided Hoses, chromium plated brass, fancy type 15mm dia complete all as specified and as directed. Make : Jaquar Cat No. SOL-6169B or equivalent in Kohler/ Cera as approved by GE

S&F in replacement Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange, chromium plated brass, fancy type 15mm dia complete all as specified and as directed. Make : Jaquar Cat No. SOL-6281 or equivalent in Kohler/ Cera as approved by GE

S&F in replacement Overhead Shower 150X150mm Squarel Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System with wall flange, 15mm dia complete all as specified and as directed. Make : Jaquar Cat No. OHS-35495 or equivalent in Kohler/ Cera as approved by GE

S&F in replacement Single Lever Sink Mixer With Swinging Spout on Upper Side (Wall Mounted Model) With Connecting Legs & Wall Flanges, 15mm dia complete all as specified and as directed. Make : Jaquar Cat No. DRC-37165 or equivalent in Kohler/ Cera as approved by GE

S&F in replacement Concealed Stop Cock with all Fitting Sleeve, Operating Lever & Adjustable Wall Flange, 15mm dia complete all as specified and as directed. Make : Jaquar Cat No. CQT-23083K & ALD-083CQT or equivalent in Kohler/ Cera as approved by GE

S&F in replacement Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer) , 15mm dia complete all as specified and as directed. Make : Jaquar Cat No. ALD-577 or equivalent in Kohler/ Cera as approved by GE

S&F in replacement two way angle cock with wall flange, chromium plated brass, fancy type 15mm dia complete all as specified and as directed. Make : Jaquar / Kohler/ Cera as approved by GE

S&F in replacement two way bib cock with wall flange, chromium plated brass, fancy type 15mm dia complete all as specified and as directed. Make : Jaquar Cat No. KUP-35041PM or equivalent in Kohler/ Cera as approved by GE

Demolition of cement concrete as removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster, padding,cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc . flushing at junction of parapets complete and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.

M&L for plain cement concrete 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate), as in roof padding over roof for making good depression / undulation to make the existing as filling in depression of roof slab, complete all as specified & directed.

M&L for neat cement slurry @ 3.00 kg/Sqm and screeding / bedding layer of 10 mm thick in CM 1:3 mixed with water proofing compound as per manufacturer instructions over the RCC roof slab for laying of water proofing treatment including providing the following as roof treatment complete all as specified and as directed : - (a) FIRST COURSE: Applying a coat of bituminous primer @ 0.4 litre / Sqm manufactured by the same agency that of APP with a density 0.87 to 0.89 Kg/litre at 25 degree celsius on prepared plastered surfaces. (b) SECOND COURSE: Applying one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm (c) THIRD COURSE : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 3.00mm having weight not less than 3.00 Kg/Sqm, mineral gravel finish on top, using torch application method with minimum 10cm side lap and 15cm end lap complete . (d) FOURTH COURSE : Applying one coat of bonding material using blown type bitumen conforming to IS- 702 grade 85/25 @ 1.20 Kg/Sqm. (e) FIFTH COURSE : 40 mm thick plain cement concrete 1:2:4 (using 20 mm stone crushed aggregate) as in roof padding, including WPC as per manufacturer instruction. NOTE :- 1. A Information Tablet will be put up in the front side wall of the buildings where this work will be done. All building/structure shall be provided with plaque (tablet) furnishing the information as per PS clause, in plaster engraving in and painted as directed by GE 2.WPC shall be measured and paid separately under respective item.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc., and applying neat cement slurry with 3kg of cement per sqm complete all as specified and as directed.

M&L for 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base of flooring, incld. finishing the surface even & rough to receive tiling etc., complete all as specified and as directed.

M&L for dark shade/double charged vitrified ceramic tiles, 10 mm thick (square/ rectagular) polished, area of each tiles exceeding 0.18 sqm bu not exceeding 0.36 sqm, (size & shape, shade and pattern as approved by GE), as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles, over & including M&L 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

All as per item No. 13.00 here-in-above, but as in skirting with 10 mm thick backing coat in cement motar CM 1:4.

M&L for joint free non skid ceramic coloured tiles (premium quality) of size 6 to 7 mm thick (square/rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for joint free glazed colour ceramic tiles (premium quality) of size 250X450X6-7mm / 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 15mm thick backing coat in CM (1:6) complete all as specified and directed.

Taking down of steel windows/vents with all fittings complete carefully & removal away from store, complete all as specified and directed.

M&L for fabrication of powder coated (powder coating min 50 micron) aluminium frame work as in frames for aluminium windows with or without rebate or for sliding windows(two track/three track ), ventilators etc with louvers having suitable mechanism for tilting , U shaped fillets for securing Jallies etc & the likes complete all as per sample kept in GE Office & fixed in position complete all as directed. Note : Glass panes in louvers & stainless steel wire cloth shall be measured & paid for seperately,

M&L for Pre- powder coated (powder coating min 50 micron) aluminium decogrill all as per sample fixed to aluminium framework of windows & ventilators,complete all as specified and as directed.

M&L for Pre powder coated (powder coating min 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified all as directed & specified

M&L for Pre powder coated (powder coating min 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) ,complete all as specified and as directed.

S&F Sheet glass 4.80mm thick, ordinary quality and glazing with oil putty/aluminium with rubber beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.

S&F 4 mm thick pin headed figured glass in small widths as in louvers of ventilators complete all as directed.

S&F 3 mm thick plain glass ordinary quality & glazing with oil putty in square n exc 0.50sqm in each pane. ,complete all as specified and as directed

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for 15 to 18 mm thick udaipur green stone slab, as in cooking plateform/ WHB counter top, machine cut, (table rubbed and polished) best quality as per sample, including & over 20 mm thick screeding in CM1:3 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.providing suitable dia hole in the slab for the gas pipe, complete all as specified and as directed.

M&L 20-25 mm thick machine cut Kota stone, as in shelves and other places etc., laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing, complete all as specified and as directed.

Taking down shutter of any description area exc 1 Sqm but n. exc 2 Sqm each , complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area not exc 1.5 Sqm each, complete all as directed.

Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.

S&F 35 mm thick second class hard wood factory made plain, framed, panelled shutters, with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and as directed.

M&L 35mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a wood grain printed PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Wood Grain Printed(Both sides) PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed (both sides) PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per spec & drawing

M& L for solid PVC door frame of size 50x47mm made out of 5mm wood grain printed colour PVC sheet reinforced with MS square tube complete all as specified.

S&F butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type C-11, complete all as specified and as directed.

S&F 200mm long aluminium anodised tower bolt, complete all as specified and as directed.

S&F 150mm long aluminium anodised handle extruded section, complete all as specified and as directed.

S&F of aluminium alloy anodised sliding door bolt with hasp and staple bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long, complete all as specified and as directed.

S & F and in repair for 100mm long, mild steel single action spring hinge all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete all as specified and as directed.

S&F in replacement 110mm bore PVC (SWR) pipes single socketed, in any length with or without ears with cement joints, laid in trenches or in floors and including old u/s demolation drain/PVC/CI pipe ,complete all as specified and as directed

S&F in replacement 110mm bore PVC (SWR) bends (any radius), diminishing pieces or tapers (larger bore measured) ,complete all as specified and as directed

S&F in replacement 110mm bore PVC (SWR) Junction, single, equal or unequal, ordinary or inverted with spigot or socket branch.

S&F in replacement 75mm dia PVC (SWR) pipes single socketed, in any length with or without ears with cement joints, laid in trenches or in floors and including old u/s demolation drain/PVC/CI pipe ,complete all as specified and as directed

S&F for 75mm PVC (SWR) bends (any radius), diminishing pieces or tapers (larger bore measured) ,complete all as specified and as directed

S & F 75mm bore PVC [SWR] Floor Trap with grating including jointing to waste pipe fixed with solvent cement, and making floor good ,complete all as specified and as directed

S & F in replacement white vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests and PVC 'P' or 'S' trap, including M&L brackets, flush HDPE pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts & fixing arrangement of cistern, including provision of cement concrete bedding 1:5:10 type E2 complete all as specified and as directed.

S&F in replacement vitreous ware wash down water closet [Pedestal Pattern], white [ETWC] including plastic water closet seat back soft closed pattern with flat bottom and cover & jet and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap connecting to drain pipe and flushing pipe etc., complete all as specified and directed.

S&F in replacement Plastic water closet seat cover, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device ,complete all as specified and as directed.

S&F 10 ltrs capacity PVC valve less(Super special colors), (ISI Marked) syphonic action type, flushing cistern, low level, with Anti Bacterial Knob, with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and, cistern colour shall be match WC colour, complete all as specified and as directed. Make:- Cera cat. No. B1010102 CIENA PREMIUM or its equivalent model in Parryware / Jhonson as approved by GE

S & F in repairs vitreous china ware wash hand basin, white, flat back of size 630 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 450mm long complete all as specified and as directed.

S&F in replacement 500 ltrs capacity rotational moulded polythene water storage tanks white colour, three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms, including dismantling of old U/S PVC/RCC water tank & removing to store or outside MD land or credit to contractor, complete all as specified and as directed. Make:- Sintex / Rotex as approved by GE

All as per item No. 110.00 here-in-above, but tank capacity is 1000 ltrs

M&L 50 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight in 2 mtr interval, complete all as specified and directed.

M/s Ajay kumar Garge

M/S SUMAN ENTERPRISES