Upgradation of Hotel Kunzam Manali District Kullu HP Sub Head Civil work and EI work

Amount

Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters etc including chowkhats architraves, hold fasts and other attachments etc. complete and stacking the useful materials in specified manners and disposal of unserviceable materials as per the direction of Engineer in Charge through manually approved dumping site within all lead and lifts and mechanical means not exceeding 3 Sqmtr. in area.

Dismantling of tiled floors laid in mortar up to floor two level and above including stacking of serviceable materials and disposal of un-serviceable materials as per direction of Engineer in charge through manual means approved dumping site within all lead and lifts. a) For thickness of tiles above 25 mm and upto 40 mm

Dismantling roofing including rides, hip, valleys gutters etc. stacking the serviceable material in specified manners as per the direction of Engineer-in-Charge and disposal of un-serviceable materials all leads and lifts through manual and mechanical means approved dumping site. a)G.I. sheet roofing

Dismantling cement asbestos celotax/ hard board in ceiling or partition wall including stacking of serviceable materials and disposal of unserviceable materials in specified manners as per the direction of Engineer-in-Charge in all leads and lifts through manual and mechanically means approved dumping site

Demolition RCC/RB work above G.I. upto floor two level and above including disposal of unserviceable materials with in all leads through manually and mechanical means including cutting the necessary reinforcement and separating out the serviceable from RCC/R.B. work also carriage of the same by manually and mechanical means approved dumping site materials in all leads and lifts.

Demolition of brick work above ground level upto floor two level and above including stacking of serviceable as per the direction of Engineer-in-Charge and disposal of un-serviceable materials within all lead and lifts through manual and mechanical means approved dumping site.

Brick work 2nd class using common burnt clay building bricks in superstructure above plinths level in cement mortar 1:6 (1cement:6sand) including carriage of materials in all leads, lifts and upto all heights.

Providing wood work in frames of false ceiling, partitions etc. sawn and put in position including carriage of materials in all leads and lifts and heights. a) 2nd class kail wood.

Providing wood work in frames of doors, windows and other frames wrought framed and fixed in position in Ist class sall wood including carriage of materials in all lead, lifts and upto all heights.

Providing and fixing 20 mm thick wooden plank ceiling with tongued and grooved jointing and wood screws (frame work and cover fillets to be measured and paid separately) 20 mm thick, Ist class kail wood wood including carriage of materials in all lead and lifts.

Providing and fixing 4 mm thick venerred decorative ply wood lining with decorative surface on one face with buttt jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials in all lead and lifts.

Providing and fixing wooden plank ceiling with tongued and grooved jointing and wood screws (frame work and cover fillets to be measured and paid separately) 12 mm thick, Ist class Douglas fir wood including carriage of materials in all lead and lifts.

Providing eaves board 200 mm x 25 mm mm thick including fixing in position 2nd class deodar wood including carriage of material in all lead and lifts.

Providing and fixing panelled glazed or paneled and glazed shutters for doors windows and clerestory windows including black enameled iron butt hinges with necessary screws including carriage of materials in all leads, lifts and upto all height. a) 40 mm thick, Ist class deodar wood

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56 mm for doors, windows and clerestory enamelled iron hinges with necessary screws including carriage of materials in all leads and lifts. a) 40 mm thick, Ist class deodar wood.

Providing and fixing bright finished brass ACME Godrej kitch mortice lock fixed with necessary screws (Indian make) with a pair of key including carriage of materials in all leads and lifts.

Providing and fixing bison board ceiling baison make with butt jointing nails (frames work cover and fillets to be measured and paid separately) including carriage of materials in all lead and lifts. a) 6 mm thick cement bonded particle board

Providing and laying coloured glazed vetrified tiles (300 x300 mm x10mm) Nitco / Kajaria / RAK/ of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. (Basic rate not less than Rs. 50/- per Sqft.)

Providing and fixing of 8mm thick ( Pergo)Laminated wooden flooring, classification of use 31/23 with a surface abrasion resistance of class AC4 (4500 cycles) and impact resistance of less than 9 mm. with a 0.2 mm thick wear layer on top of a High Density Fiber substrate core (density ~ 940 Kgs/M3) of plank size 1285 mm X 186 mm having Bruce™ locking arrangement with an underlayment made of 3 mm thick natural colour foam of 30 Kgs/M3 density and 25 micron LDP film thermo fused to the main underlayment to form a single unit, with accessories like End profile, Transition profile, reducer, Stair nosing etc. complete. Installation to be carried out strictly as per Installation Guide of Armstrong using Armstrong PVC/ Aluminium profiles. The MDF Moulded Skirting to be 80/90mm. Including carriage of material in all lead and lift.

Providing and laying granite stone flooring 20 mm average thickness over a base of 20 mm thick cement mortar 1:3 (1cement:3sand) laid over and jointed with grey cement slurry mixed with pigment to match shade of the granite stone including rubbing and polishing with granite polish finish grey/red including carriage of materials in all lead and lifts (Basic rate not less 250/- Sqft.).

Providing and laying 20 mm thick Italian marble work (table rubbed and polished) in flooring 20 mm thick base in cement mortar 1:3 (1cement:3sand) including jointing with cement mortar 1:2 (1white cement:2 marble dust) with an admixture of pigment to match the shade of the marble including carriage of material in all lead and lifts.

25 mm thick kota stone slab flooring over 20 mm (average) thick base of cement mortar 1:4 (1cemet:4sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with granite polish etc. complete also carriage of materials in all lead, lifts and heights.

25 mm thick kota stone slab in risers of steps, skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1cement:3sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing and carriage of materials in all lead, lifts and heights

Coloured glazed tiles Nitco/Rak/ Kajaria make of size 600x300mm and 6 to 8 mm thick In skirting, risers of steps and dado over a bed of 12 mm thk. cement mortar 1:3 (1 cement : 3 coarse sand) jointed with white cement slurry mixed with pigment to match the shade of tiles etc. complete, including carriage of materials in all leads and lifts.(Basic Rate not less than Rs. 55/-- Per Sqft.

Providing and fixing 0.60 mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coated including fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia metre with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-Charges. (Tata/Century wells make) including carriage of materials in all lead, lift and height.

Providing and fixing ridges or hips 60 cm overall with 0.60 mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6 mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charges including carriage of materials in all lead, lift and height (Tata/Century wells make).

Providing and fixing valley 60 cm overall 0.60 mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge including carriage of materials in all lead, lift and height (Tata/Century wells make).

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint including carriage of materials in all lead lifts and height ISI mark and as approved by the Engineer-in-Charge. a) In gratings framed guard, bars, ladders, railings brackets and similar works

Polishing two or more coats with french polish on new wood and wood based surface to give an even shade as per direction including preparing the base surface cleaning of all dirt dust and sand papering etc. complete including carriage of materials.

Applying priming coat on new concrete/masonry/ asbestos cement/ plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matters and sand papering as required with ready mix primer including carriage of materials in all leads, lifts and heights.

Applying priming coat over new wood and wood based surfaces with Readymixed paint brushing priming for enamel after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign, including carriage of materials in all leads, lifts and heights.

Painting two coats of standard make and quality (excluding priming coat) on new wood and wood based surfaces, with enamel paint, brushing to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping. a) With enamel paint other then white.

Finishing wall with weather proof exterior grade emulsion of Asian/Apex or Nerolac make and colour on undecorated wall surface two or more coats to give an even shade and final finish after thoroughly cleaning of the surface of all dust dirt droppings and other foreign matter.( applying birla putty to be paid separately) including carriage of materials in all lead, lifts and height.

Supplying and fixing glass panes with 1st class teak wood beading of required size including removal of broken glass panes wherever necessary including carriage of materials in all leads and lifts. (Modi guard/ Saint Gobain or equivalent make). a) Frosted glass 4 mm thick.

20 mm cement plaster in single coat on rough side of brick/concrete/stone wall for interior plastering in all floor level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1cement:6sand) including carriage of materials in all leads, lifts and heights.

Wall Painting ( two coats) with plastic emulsion paint of approved brand and manufacture on decorated wall surface to give an even shade including thoroughly brushing the surface clean of all dirt grease, loose pieces of scale and sand papered smooth including applying of putty a required for making the surface including carriage of materials in all lead and lifts.

Providing and fixing to wall ceiling and floor galvanized mild steel tubes (medium grade) tube fittings and clamps including making good the wall, ceiling and floor and carriage of materials in all lead and lifts. a)15 mm dia, Tata/jindal Make

Providing and fixing brass full way valve with wheels including carriage (ISI make) heavy duty Zolato/Leader make . a) 15 mm nominal size

Providing and fixing G.I./M.I. union including carriage of materials in all lead and lifts. a) 15 mm heavy duty

Providing and fixing PVC pipe Finolex /Dplast/Supreme ventilating pipes jointed with standard quality adhesive including carriage of materials in all lead and lifts. a) 75 mm nominal size

a) 110 mm nominal size

Providing PVC finolex/Dplast/Supreme fittings and accessories of standard/ approved quality including carriage fo materials in all lead and lifts. a) Plain bends i) 75 mm nominal size

ii) 110 mm nominal size

b) Door bend i) 75 mm nominal size

ii) 110 mm nominal size

c) Sigle equal branch of reuired degree with or without heel rest with oval access door insertion rubber, washer 3 mm thick bolts and nuts complete. i) 75 mm nominal size

ii) 110 mm nominal size

d) Collar i) 75 mm dia

ii) 100 mm dia

e) PVC clamp i) 75 mm nominal size.

ii) 110 mm nominal size.

e) PVC Cowl i) 75 mm nominal size.

ii) 110 mm nominal size.

Providing and fixing PVC floor trap Finolex/Dplast/Supreme of self cleaning design with sand cast iron screwed down on hinged grating including carriage of material in all lead and lifts. a) 110 mm nominal size

Providing and fixing vitreous china white wash down water closet Jaquar make Cat No.LYS-WHD38851S or equivalent series of Hindware/ Cera make (European type W.C. pan) with integral “P” or “S” trap complete studieo set including jointing the trap with soil pipe in cement mortar 1:1 (1cement:1sand) including carriage of materials in all lead and lifts.

Providing and fixing vitreous china coloured Jaquar make cat No.FSS WHT 2901 or equivalent series of Hindware/ Cera make wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting hole and making good the same but excluding fittings including carriage of materials in all lead and lifts

Providing & fixing C.P. brass bottle trap 32mm dia Jaquar make cat No.ALD-769L size 250x190 or equivalent series of Jal/Cera for wash basin & sink including carriage of material in all lead and lifts.

Providing and fxiing C.P. brass waste (Heavy duty) for wash basin or sink 32 mm dia including carriage of materials in all lead and lifts.

Providing and fixing C.P.Brass chain 50 cm long and rubber plug of following sizes for sink or wash basin including carriage of material in all leads and lifts .

Providing and fixing C.P. towel rack of Jaquar make cat No. AKP35781 or equivalent series of Jal/ Cera including carriage of materials in all leads and lifts.

Providing and fixing C.P. towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass Jaquar make cat No.AQN-7711 or equivalent series of Jal/ Cera size 600 mm long including carriage of material in all lead and lifts.

Providing and fixing looking mirror 1200x900 mm beveled edge 4 mm thick superior glass modiguard of approved make with 1st class deodar wood frame including 6 mm thick water proof ply back side complete as per design including carriage of material in all lead and lifts.

Providing and fixing C.P. soap dispenser Jaquar make Cat No.ACN 1135 N or equivalent Jal/ Cera make including carriage of materials in all lead and lifts.

Providing and fixing C.P. soap dish Jaquar make cat No.ACN 1131 N or equivalent Jal/Cera make including carriage of materials in all leads and lifts

Providing and fixing robe hook Jaqar make cat No.AQN-7791 or equivalent Jal/Cera makeincluding carriage of materials in all lead and lifts.

Providing and fixing C.P. over head shower Jaquar make Cat No. OHS 1989, SHA 477 or equivalnet Jal/Cera make including carriage of material in all lead and lifts.

Providing and fixing toilet paper holder complete including carriage of material in all lead and lifts. Jaquar make cat No.AQN-7751 or equivalent Jal/Cera make .

Providing and fixing C.P. bib tap long body with capstan head 15 mm dia complete with fittings Jaqar make cat No.FUS 29037 KN or equivalent series of Jal/ Cera make including carriage of material in all lead and lifts.

Providing and fixing C.P. wall mixer Jaquar make cat No.FUS 29273 UPR diverter Jaquar make Cat No. ALD 065 or equivalent series of Jal/ Cera make including carriage of material in all lead and lifts.

Providing and fixing C.P. concealed stop cock 15 mm dia Jaquar make cat No.065 or equivalent series of Jal/ Cera make including carriage of materials in all lead and lifts.

Providing and fixing C.P. basin mixture Jaquare cat No. FUS 29023 BB or equivalent series of Jal/ Cera make including carriage of materials in all lead and lifts.

Providing and fixing C.P. towel ring complete with C.P. brass bracket complete Jaquar make cat No.AQN-7721 or equivalent series of Jal/ Cera including carriage of material in all lead and lifts.

Providing and fixing brass glass tumbler holder Jaquar make Cat No. CAN 1141 N or equivalent Jal/ Cera make including carriage of materials in all lead and lifts.

Providing and fixing C.P. angle valve 15 mm bore Jaquar make cat No.FUS 29053 or equivalent series of Jal/ Cera including carriage of material in all lead and lifts.

Providing and fixing consaealed stop cock Jaquar make cat No. FLR 5089N or equivalent Jal/Cera make including carriage of material in all lead and lifts.

Providing and fixing C.P. grating heavy duty chilly make including carriage of material in all lead and lifts.

Construction manhole with R.C.C. top slab in 1:2:4 1cement:2sand:4graded stone aggregate 20 mm nominal size) foundation concrete 1:4:8 (1cement:4sand:8graded stone aggregate 40 mm nominal size) inside plastering 15 mm thick with cement mortar 1:3 (1cement:3sand) finished with a floating coat of neat cement slurry and making channel in cement concrete 1:2:4 (1cement:2 sand: 4 graded stone aggregate 20 mm nominal size) finished smooth complete including curing and testing including carriage of materials in all leads and lifts. a) Inside size 800mmx 800mm x 500 mm deep including C.I. cover with frame light duty single seat pattern) 455 mm x 610 mm internal dimension total weight of cover and frame to be not less than 38 Kg (weight of cover 23 Kg and weight of frame 15 Kg.(i) With 200 mm thick wall of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1cement:3sand).

Providing and fixing stoneware gully trap grade "A" complete with C.I. grating brick masonry Chamber square mouth trap size 300 x 300 mm size (inside) the weight of cover to be not less than 4.53 Kg. and frame to be not less than 2.72 Kg. including carriage of material in all lead and lifts.

Providing and fixing health faucet Jaquar Make Cat No.ALD BLK 583 or equivalent Jal/ Cera make including carriage of materials in all lead and lifts.

E.I. work: Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required in all leads & lifts.(Wire & Switches, sheets, boxes etc. Havell's/Legrand/Greatwhite/L&T make) a) Group A.

b) Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit, with 2-way modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required in all leads & lifts.(Wire & Switches, sheets, boxes etc. Havell's/Legrand/Greatwhite/L&T make) . a) Group A.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required in all leads & lifts.(Switches, sheets, boxes etc. Havell's/ Legrand/Greatwhite/L&T make)

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required in all leads & lifts.(Switches, sheets, boxes etc. Havell's/ Legrand/Greatwhite/L&T make)

Supplying & fixing of G.I. modular boxes of 1/2 module along with modular base and cover plate for modular switches in recess including providing and fixing RJ45 UTP information outlet modular, as required in all leads & lifts (Havell's/Legrand/Greatwhite/L&T make):- (For computer point).

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required in all leads & lifts.(Copper cable Havell's/Phenolix/Greatwhite/ L&T/Plaza & PVC pipe Diplast/Polyplast/Setia make).

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required in all leads & lifts.(Copper cable Havell's/ Phenolix/Greatwhite/L&T/Plaza & PVC pipe Diplast/Polyplast/Setia make).

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required in all leads & lifts.(Copper cable Havell's/ Phenolix/ Greatwhite/ L&T/Plaza make).

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required in all leads & lifts (D-Plast/polyplast/Setia make) a) 20 mm. dia

b) 25 mm. dia

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required in all leads & lifts.(Copper cable Havell's/ Phenolix/Greatwhite/L&T/Plaza make). a) 2x10 Sq. mm.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required in all leads & lifts. (Havell's/ Legrand/ Greatwhite/L&T make). Single pole. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required in all leads & lifts. (Havell's/ Legrand/ Greatwhite/L&T make). a) 25 Amps. Cat-A.

b) 40 Amps. Cat-A.

c) 63 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required in all leads & lifts. (Havell's/ Legrand/ Greatwhite/L&T make). a) Double door-4 way

b) Double door-8 way

c) Double door-12 way

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required in all leads & lifts. (Havell's/ Usha/ Khaitan/Bajaj make) :- a) Exhaust Fan, Light duty, (Domestic) 225 mm sweep

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required in all leads & lifts (Racold/Bajaj/ Spherehot/Havell's make):- a) 35 Liter capacity water heater (Cat-A)

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required in all leads & lifts (Havell's/Legrand/Greatwhite/L&T make):- a) 2 modules (78mmx78mmx50mm)

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required (Havell's/Anchor/greatwhite/L&T make). a) Telephone socket outlet, Modular.

b) TV. Socket outlet, modular.

Supplying and drawing following pair of Fire Retardant, PVC insulated 0.5 sq.mm. (FR-Flexible) copper conductor, flat, unarmoured, telephone cable in existing surface / recessed, steel / PVC conduit as required in all leads & lifts (Havell's/ Phenolix/Greatwhite/ L&T/Plaza make). a) 2 Pair

Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required in all leads & lifts Havell's/ Phenolix/Greatwhite/L&T/Plaza make).

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts including connections etc. as required in all leads & lifts (Havell's/Greatwhite/Anchor make).:-

Providing and fixing ultra slim decorative New E-Lite LED Curve Tube fixture High lumen batten with efficacy of 100 Lumens 20W.extruded box fixture, complete with all accessories (including one No.Tube Rod), connections, testing and commissioning etc. as required in all leads & lifts Havell's make Cat No. LHEXBXPNIN1W020 or its equivalent or as approved by the Engineer in charge. (Havell's/Syska/Bajaj/Cromton Greaves/Greatwhite make)

Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required in all leads & lifts (Havell's/Decon/Philips/Bajaj make). a) Fixed type wall bracket 150 dia, single lamp.(Category-A)

Providing and fixing following type of surface mounting decorative LED luminaire with powder coated CRCA sheet steel housing, low glare aluminium mirror reflector, pre-wired complete with all accessories, connections, testing and commissioning etc. as required in all leads & lifts (Havell's/Syska/Bajaj/Cromton Greaves/Greatwhite make). a) Ceiling fitting LED 2x36 suface type commercial fixture.

b) Ceiling fitting LED 3x36 suface type commercial fixture.

S/D LAN cable CAT 5E, solid copper conductor protected with PVC sheath in the existing surface recessed steel /PVC conduit as required in all leads & lifts (Havell's/Greatwhite/L&T/Phenolix make).

Supply and erection of fancy wall Light, Suitable for the LED lamp complete with all accessories including LED lamps and connections etc. as required including carriage of material in all lead and lifts as per the direction of Engineer-in-charge (Havell's/Decon/Philips/Bajaj make). Fixed type wall bracket 150 dia, single lamp.(Category-A)

Supply and erection of surface mounting luminares (Mirror Light) Havell's Make LED light 6000K CAT No. LHEXARP7PN1W009 Linear & compact 9W with decorative grey end caps, polycarbonate body and ribbed opal diffuser complete with connections etc. as required or its equivalent in all leads & lifts as approved by the A.E.(E) (Havell's/Decon/Philips/Bajaj/ Greatwhite make).

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required in all lerads & lifts (Legrand/Havell,s/Greatwhite/L&T make).a) S.P. 5/ 6 Amps one way Modular switch.

b) 5 pin, 5/ 6 Amps Modular socket outlet.

c) S.P. 15/ 16 Amps one way Modular switch.

d) S.P. 15/1 6 Amps one way Modular socket.

Providing, installing, testing and commissioning of ceiling fan and regulator, including wiring, the down road of standard length(upto 30 Cm.) with 1.5 Sq.mm. PVC insulated copper conductor single core cable etc. as required in all leads & lifts (Usha/Baja/Havells/Khaitan make). a) Ceiling Fan 1200 mm sweep, category-A

Supply and erection of surface mounted square shaped LED downlighter with durable housing with Al. heat sink with diffuser to give glare free light with removablev driver complete with all accessories including connections etc. as required in all leads & lifts. Bolt Square or its equivalent CAT No.LHEAASP7UL1W012 Havell's/Crompton Greaves/ Syska/Greatwhite make. a) 12 Watt LED surface Type