Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹67.6 LAccepted-AOC | L-1 | Accepted-AOC L-1 |
Tender Value
₹69 L
EMD Value
₹1.4 L
Closing Date
3 Feb 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SUPRITENDING ENGINEER
SE VTH CIRCLE IW BAREILLY
Bareilly main meeting hall va dormatry nirman ka karya
2022_UPIDC_761749_3
05/SE/2022-23
Open Tender
Civil Works - Buildings
Item Rate
90 days
BAREILLY
Please refer Tender documents.
2 documents required · 2 mandatory
₹300
Yes
₹1.4 L
Yes
16 Feb 2023
28 Jan 2023
3 Feb 2023
28 Jan 2023
3 Feb 2023
28 Jan 2023
Amount
Earth work in foundation in dry ordinary soil including lift up to 1.50 m and lead up to 30 m and including back filling, watering and ramming fo excavated earth into the trenches or into the space between the structure and the sides of foundation trenches or into the plinth with removal and disposal or surplus earth as directed by the Engineer-in-charge. (As per I.D.S.O.R. Chapter - V/1)
Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating barrier under and around thecolumn pits ,wall trench basement exavation top surface of plinth filling junction of wall and floor along the external per meter of building expension joints surrounding of pipes and conduit etc. Complete (plinth area of the building at ground floor only shall be measured as per I:S 6313( part ii 1981). Aldrine emulsificable concentrate of any other approved material such as Hepthachlor or chlordance will be used . The rate of application of chemical emulsion shall be as follows.(As per pwd s.o.r chap. no. 8 item no. 1)
Laying C.C. 1:4:8 Mix cement, coarse sand & 20 mm down graded stone grit including cost of all material, labour and T&P etc. complete but excludiing cost of shuttering. (In Foundation & in flooring ).
Laying Brick work C.M. 1:4 Mix cement & coarse sand including cost of all material, labour and T&P etc. complete.
Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km . From the site of work & including watering , dressing etc. Rate includes cost of all materials, labour and T&P etc. required for proper completion of the work. (including royalty)
25 mm thick D.P.C with 1:1.5:3 cement, coarse sand and 13mm graded stone grit and including water proofing materials as orderd by the engineer in charge in the proportion as specified by the manufacturers.
Laying R.C.C. 1:1.5:3 Mix (M-20) cement, coarse sand & 20 mm down graded stone grit including cost of all material, labour and T&P etc. complete but excludiing cost of Centering, shuttering & Reinforcement.
Mild steel or iron in plain work such as a reinforced concrete or reinforced brick work (when not included in an over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastege and over lapping & hooks.
Centring & shuttering for R.C.C. work including cost of centring & shuttering , labour and T&P required for proper completion of work etc.up to 3.0 m height.
Providing wood work in frames of doors , window s, clerstory windows and other frames, wrought framed and fixed in position.(Sal wood)
Supply and fixing Flush Doors commercial quality with second class teak wood including ISI marked anodised aluminium but hinges with necessary etc. complete. (as per D.S.R. 9.16.1)
Cement Plaster in 1:5 cement mortar as directed by Engineer in charge & also including all cost of material, labour & T&P etc.
Providing and laying vitrified floor tiles in different size(thickness to be specified by the manufaturer) with water absorption less than 0.08% and conforming to IS 15622 of approved make in all colours and shades , laid on 20 mm thick mortar 1:4 including grouting the joints with white cement and matching pigments etc, complete(size(600mmx600mm).
Supply and fixing 6 mm China whaite glaged in flooring or skirting dado laid with 1:3 cement and approved coarse sand mortar finished white cement slurry jointing and polishing complete including supply of all material , labour and T&P etc. required for proper completion of work.
Providing and fixing 18 mm thick gang saw cut mirror polished( premoulded and pre polished) machin cut for kitchen platforms , vanity counters,window sills , facias and similer location of required size of approved shade,color and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 c/sand) with joints treated with white cement , mixed with matching pigment, appoxy touch ups, including rubbing , curing moulding and polishing to edge to give high gloss finishe etc. complete at all levels .(plain white marble/udaipur green marble/zebra black marble.
Distemper one coat with oil bound distemper of approved brand manufacture and required shade on decorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as of british , shalimar,asian paints after throughly brushing surface free from mortar droppings and other forign matter and also including preparing the surface even also sand prepared smooth including cost of all materials. (for every coat after the first coat.)
Finishing walls with Acrylic smooth exterier paint of new work (Two or more coat and including base coat of water proofing cement paint (as per DSR 13.46.1) new Item CH-15
Three coat of Enamal Painting on flush shutter over one coat of primer base finish.
Providing and laying “brick coba” 12 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be monoltythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary & Coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T & P etc complete for proper completion of work.
Supply and fixing of 10 cm internal dia A.C. down pipe everest or charminar make complete with bends with door at top and plain at bottom and grating and including supply of necessary M.S.clamps 2.5 cm x 3 mm fixed to walls with and including supply of 15cm long 6mm dia nails all material labour and T&P etc required for completion of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipe. But with PVC pipe (kisan,supreme or equivalant ) 6 kg /per sq.cm.pressur 10cm dia.
Fully perforted Gypsum plaster Board of size 600x600 x 12.5 mm having approx. 15 % perforted area with perforation size and pattern as approved by the engg. In charge and as per manufacturer specification , with all 4side tapered and backed by acoustical tissue with NRC value not less than 0.60.
25 mm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 20 mm graded approved stone shingle laid in panels finished with 3 mm. floating coat of neat cement or cement and marble dust in 5:1 as specified over & including 80 mm. thick base concrete consisting of cement, local sand and brick ballast 40 mm gauge in the proportion of 1:4:8 and removing any over lapping mortar at the joints of panels if any and giving them a uniform finish including supply of all materials, labour and T & P etc. required for proper completion of the work.
Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating etc,(when not included in an overall rates) wrought to required form, including of supply of steel , bolts, nuts and wastage etc. required for completion of work but of febrication of hold fast nosing hold fast.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittingswith one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(DSR 2021 item no 18.9) (i)-150 mm dia
Same as above (ii)-100 mm dia
Same as above (ii)-80 mm dia
Providing and fixing trap of self cleansing design with screwed downor hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet(DSR Item 17.60.1)
Providing and fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(DSR 2021 item no 18.7) internal work exposed on wall (i) 25mm nominal bore
Same as above (ii) 32mm nominal bore
Same as above (iii) 40mm nominal bore
Providing and fixing chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.0m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(DSR 2021 item no 18.8) Concealed work including cutting chases and making good the walls etc. (i)-20mm nominal bore
Same as above (ii)-25mm nominal bore
Same as above (iii) 32mm nominal bore
Providing and fixing brass stop cock of approved quality(DSR 2021 item no 18.16) (i) 15mm nominal bore
Same as above (ii) 20mm nominal bore
Providing and fixing C.P . brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.(DSR 2021 item no 18.52) (i) 15mm nominal bore
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.(DSR 2021 item no 19.27)
Constructing brick masonry manhole with 2nd class bricks in cement mortar 1:4 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.(DSR 2021 item no 19.7)Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5(DSR 2021 item no 19.7.1.1)
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.(DSR Item 17.78)
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps(DSR Item 17.7.1)
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :17.4.1 One urinal(DSR Item No 17.4.1)
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :17.10.1 Kitchen sink with drain board:510x1040 mm bowl depth 250 mm each 6008.45(DSR Item No 17.10.1.1 )
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long,200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour,weighing not less than 88 gms.(DSR Itemn No 17.72)
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.(DSR Itemn No 17.71)
Providing and fixing toilet paper holder : C.P. brass each 680.80 (DSr Item No 17.34.1)
Providing and fixing P.V.C. waste pipe for sink or wash basin including Flexible pipe 32 mm dia(DSR Item No 17.28.2.1)
Providing and fixing 600 X 450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats wiyh C.P. brass screws and washers complete. (DSR Item No 17.31)
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810gms.(DSR Item No 18.50)(i) 15 mm dia nominal bore
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standard and weighing not less than 690gms.(DSR Item No 18.51)(i) 15 mm dia nominal bore
Providing and placing on terrace (at all floor levels) polyethylene triple layer water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipe but without fittings and base support for tank(DSR Item No 18.48)
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(i) Group A
Same as above (ii)Group B
Same as above (iii)Group C
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.(i) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
Same as above (ii) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
Same as above (iii) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire
Same as above (iv) 4 X 10 sq. mm +2 X6 Sq. mm earth
Same as above (v) 4 X 16 sq. mm +2 X6 Sq. mm earth
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (i) 25 mm
Same as above (ii) 40 mm
Same as above (iii) 50 mm
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (i) 5/6 A switch
Same as above (ii) 2 way 5/6 A switch
Same as above (iii) 15/16 A switch
Same as above (iv) 3 pin 5/6 A socket outlet
Same as above (v) 6 pin 15/16 A socket outlet
Same as above (vi) Telephone socket outlet
Same as above (vii) TV antenna socket outlet
Same as above (viii) Bell push
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required .(i) 1 or 2 Module (75mmX75mm)
Same as above (ii) 3 Module (100mmX75mm)
Same as above (iii) 4 Module (125mmX75mm)
Same as above (iv) 8 Module (125mmX125mm)
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. (i) 1 or 2 Module
Same as above (ii) 3 Module
Same as above (iii) 4 Module
Same as above (iv) 8 Module
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing up to two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.
Providing and fixing plain 16/0.20mm (0.50sqmm) twin flat flexible, FRLS PVC insulated, copper conductor cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door etc. as required.
Installation ,Testing, Commissioning of pre-wired,flourescent, compact flourescent, LED fittings of all types complete with accessories and tube/lamp etc, directly on ceiling/wall, including connections with 1.5 sqmm FRLS PVC Insulated, copper conductor single core cable and earthing the same etc.as required.
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
Installation, testing and commissioning of exhaust fan,in the existing opening, including making good the damage, connections etc as required.upto 450mm
Extra for fixing the Louvers/shutters complete with frame for a exhaust fan of all sizes.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos.5/6 A modular switch, connections etc. as required.(for light plugs)
Supplying and drawing following pair 0.5 sq. mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair (4 core) From LV box to different point
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.1 run of cable
Supplying and fixing M.S. box with modular type telephone (RJ-11) outlet complete as required.
Providing and fixing following rating and breaking capacity and pole MCCB with THERMOMAGNETIC RELASE AND TERMINAL spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.(i) 125 A,36KA,FPMCCB
Same as above (ii) 100A/63 A,36KA,FPMCCB
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required but without MCB/RCCB/Isolator) (i) 4 way (4 + 12), Double door
Same as above (ii) 8 way (4 + 24), Double door
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required. (i) For 4 way, Double door TPN MCBDB
Same as above (ii) For 8 way, Double door TPN MCBDB
Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.
Making of Earthing with COPPER EARTH PLATE of size 600mmx600mmx3mm thick i/c accessories and providing masonary enclosure with heavy duty Cover plate having Locking arrangement and watering pipe of 2.7 meters etc. with SALT & CHARCOAL as required.
Making of Earthing with G.I.(HOT DIP GALVANISED) EARTH PLATE of size 600mmx600mmx6mm thick i/c accessories and providing masonary enclosure with heavy duty Cover plate having Locking arrangement and watering pipe of 2.7 meters etc. with SALT & CHARCOAL as required.
Providing and fixing 25mm x 5 mm Copper in 40 mm dia G.I.Pipe from earth electrode including connections with brass nut,bolts, washers etc including excavation, refilling etc.as required.
Providing and fixing 25mm x 5 mm GI strip in 40 mm dia GI Pipe from earth electrode including connections with G.I. nut,bolts, washers including excavation, refilling etc as required.
providing and fixing 25x5 MM copper strip on surface or in recess for connections
Providing and fixing 25x5MM GI strip on surface or in recess for connections.
Providing and fixing 6 SWG.G.I.Wire on surface or in recess for loop earth along with existing surface /recess conduit/ submain wiring/ cables etc.as required.
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .