Civil Works for Augmentation of Receiving Station Alasteng from 6.3 MVA to 12.6 MVA

Amount

Construction of foundation for transformer and other allied equipments along with G.I pipe structure at receiving Station Alasteng

Earth work in excavation by manual means including a disposal lead of 100 metres

Supplying and laying (soling) of graded stone aggregate at site of size range 90 mm to 45 mm (Quarry.)

Providing and laying in Position Cement concrete of Specified grade excluding the cost of centring and shuttering complete:1:4:8(1 cement: 4 Coarse Sand: 8 Stone Aggregate 40 mm nominal Size) Crushed

Providing and laying in Position Cement concrete of Specified grade excluding the cost of centring and shuttering complete:1:3:6 (1 cement: 3 Coarse Sand: 6 Stone Aggregate 20 mm nominal Size) Crushed (Under Ground)

Providing and laying of cement concrete( 1:3:6) mix aggrigate size 20 mm including curing (Above Ground)

Centering and shuttering including strutting propping etc and removal of form work for foundations footings. bases of columns

12 mm cement plaster of mix 1:4 (1 cement : 4 fine sand)

Providing and laying of torsion steel bars of the following dia (12) mm , including the cost of binding wire

Supply And Erection of GI Channel Iron 100x50x50x 6mm for Transformer foundation

Supply And Erection of GI Angle Iron 50x50x 6mm for Cable Trench/Frame

Providing and laying of Chequered Plate, 16'x4'x 6mm

Galvanised Foundation Bolts and Nuts 18'' long, 25 mm- Dia along with duly fabricated flat iron strip 50x6 mm 6 inch long on top of bolt

G.I Pipe 9''-dia, 10 feet long, 6mm thick along with top and base plates (ISI Approved)

Revamping of Earthing System at Receiving Station Alasteng

Providing and Earthing complete which include equipment earthing with GI rod 20mm 2.5mtr long through flat iron strips.(50mmx6mm)

Providing and laying of Earthing Mat (GI Flat 50 mm x6 mm)

33 kV Yard Metalling (50' x 75'x9'') by supplying and spreading of 40 mm Stone Aggregate including Carriage with lead upto 10 Km

Repair and renovation Works

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shape 16mm thick. Dimension Kitchen Granite = 8' x 12 ft

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete Dimensions kitchen wall tiles= 4' x 12 ft

Providing and fixing of 19 mm thick plyboard with lamination on both sides for Almarie complete as per architectural drawings and directions of engineer-in-charge. External Dimension of 4'x2'x2.5' with 6 partitions including Chromium plated Brass 75 mm size Cupboard lock (Nickled) and chromium plated brass handles with necessary screws etc. complete Kitchen cubboard 4 x (2'x 2' )+ 3 x (2'x2.5') + 2x (4'x2.5') = 51 sft

Providing and fixing of 19 mm thick plyboard with lamination on both sides for Almarie complete as per architectural drawings and directions of engineer-in-charge. External Dimension of 5'x5'x2.5' with 6 partitions including Chromium plated Brass 75 mm size Cupboard lock (Nickled) and chromium plated brass handles with necessary screws etc. complete Cubboard= 4 partition of 2.5'x2.5'x2'. 2x(5'x5')+6x(5'x2')

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931, 15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality complete 15 mm nominal bore

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Long pan pattern white vitreous china W.C. pan of size 580 mm.

Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminium sheet, face to be fully covered with high ntensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-Ill of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by mears of suitable sized aluminium alloys, rivets or bolts and nuts@ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge Overhead informatory Receiving Station signage Dimensions- (12'x3')

Providing and fixing of ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete on Existing Gate 0.63mm thick with zinc coating not less than 275gm/m2

NAZAKAT DESIGNS & CONSTRUCTIONS

HYDERIA GROUP OF ENGINEERS AND DESIGNERS