Electrical wiring of Inspection Quarter and other misc. Electrical works of Technical building,

Supplying and fixing following size/ modules GI box/ PVC surface box along with modular base & cover plate for modular switches in recess/surface etc. as required.

2 Module (75mm * 75mm) (GI-6nos, PVC-4nos)

3 Module (100mm * 75mm) (GI-4nos, PVC-9nos)

4 Module (125mm * 75mm) (GI-6nos, PVC-12nos)

6 Module (200mm * 75mm) (GI-6nos, PVC-10nos)

8 Module (200mm * 75mm) (GI-2nos, PVC-6nos)

12 Module (200mm * 150mm) (GI-4nos, PVC-16nos)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

10 Amp switch

2-way 10 Amp switch

16/20 Amp switch

3 pin 6/10 Amp socket outlet

6 pin 16/20 Amp socket outlet

TV antenna socket outlet-1 Module

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying & fixing pvc batten/ angle holder including connection etc as required.

Installation , testing, commissioning of wall bracket/ celling fittings of all sizes and shapes containing up to two GLS/CFL/LED/ surface lamps per fitting, complete with all accessories including connection etc as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm Sweep

Supplying and fixing suitable size GI box (4-M) with modular plate and cover in front on surface or in recess including providing and fixing 25A modular socket outlet and 25A, 2-M modular Starter including connection, painting etc as required.

Supplying and fixing of following sizes of medium class PVC conduit /Casing capping along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm (PVC Conduit-90 mtrs & Casing Capping-30 mtrs)

Supply and drawing co-axial RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with sheath in the existing recessed PVC conduit as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm (10 coil of 90 mtrs)

3 x 2.5 sq. mm (6 coil of 90 mtrs)

3 x 4 sq. mm (2 coil of 90 mtrs)

Wiring for twin control light point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in recessed medium class pvc conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted\ including earthing etc. as required. (But without MCB/RCCB/Isolator)

Single pole 10A/16A/20A/32A (Each 04 Nos.)

Double pole 32A/40A (each 02 Nos.)

12 way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole 6A/10A/16A/20A (Each 6 Nos)

Double pole 32A

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering and end to end connection. up to 35 sq mm.

Earthing with G.I earth pipe 4.5 metre long, 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia GI wire in 15 mm dia G.I.Pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Supply and installation of 1.5 Ton split Air-Conditioner unit with copper condenser, Non inverter AC with 3-mtr copper pipes including GI outdoor stand, drain pipe (5-mtrs), wrapping tape etc as required.

4KVA voltage stabilizer for air-conditioner unit including installation.

LED tube light batten, 20 watt, 4-feet. Make- Reputed.

12 watt LED surface light for indoor. Round, white light including fixing in LH Tower.

12 watt LED lamp of B-22 holder.

Exhaust Fan 450mm, metal blade, heavy duty industrial type. Make-Reputed.

Exhaust Fan 225mm, metal blade, light duty domestic type. Make-Reputed.

Wall mounting revolving fan. 400 mm sweep. Make- Reputed.

LED lamp 15 watt. B-22 holder. Make- Reputed.

12 Watt LED bulkhead fitting for outdoor purpose. Make- Reputed

Ceiling Fan with Sweep 1200mm and Hight performance even at low voltage, Make- Reputed.

2.5 Sq. mm, 3 – Core, Copper, single strand, PVC Sheath, XLPE, Armored UG Cable – 1100 Volt Grade. Make - Reputed

4.0 Sq. mm, 3 – Core, Copper, single strand, PVC Sheath, XLPE, Armored UG Cable – 1100 Volt Grade. Make - Reputed

Supply and fixing of 100 Amp, 440 Volt, porcelain kit kat fuse unit, Handel type.

Digital multimeter with clamp meter.

30 watt, LED street light fitting.

LED Bollard light, 10watt, Aluminum die casting with IP65. Height 0.8-1 mtr.

Supply and fixing of LED Post Top made in cast aluminum spigot housing with decorative opal acrylic diffuser and IP65 protection. LED Gate Light Fitting - 40 /36 watt, Cool Day White.

Supply and fixing Direct on Line (DOL) starter for pump motor (upto 25Amp Max) including connection.

5 watt LED mirror light, 1-feet.

LED foot light with 4-modular GI box.

Supply and fixing of 50 Amp copper , 3-phase bus bar chamber with connection.

Supply and fixing of 63 Amp 3-phase, 440 volt ON/OFF rotary main switch with box and indicators.

Indicator 1-Modular. Make- Reputed

PVC 3X3 square PVC Junction Box.

Insulation Tape 5 mtr roll.

3-pin ,16Amp Top

S.S. Nut bolt and washers. Size-100mm X 10mm

PVC flexible Hose pipe, 40 mm Dia.

PVC round Junction box, 1'' , 2mm thick (1 to 4 way). 1-way-20nos, 2-way-20 nos, 3-way-10nos, 4-way-10nos.

Labour charges including materials for making Bollard Light foundation Base including soil excavation, Shuttering, PCC casting (1:2:4 ratio), fixing of bollard light & s.s bolt and plastering work etc complete with UG cable inter connection and painting with cement primer and enamel paint. (Size- 250mm X 250mm X 2feet)

Labour charges for removing of existing channel wiring complete including switch board, pipes, fittings, MCB boxes etc.

LUCKY ENGINEERING WORKS

MS SUJATA ENTERPRISE

MEPF INFRA