Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.1 LAccepted-AOC 0 BEECHPARA DANGAURA MAHENDRAGARH MANENDRAGARH CHIRMIRI BHARATPUR CHHATTISGARH 497442 | KOREA | CHHATTISGARH | 497442 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹42.2 L+₹1.1 L (2.70%)Rejected-Finance | L2 | Rejected-Finance Rejected being L2 | |
| 3 | L3₹46.7 L+₹5.6 L (13.6%)Rejected-Finance | L3 | Rejected-Finance Rejected being L3 | |
| 4 | L4₹47.0 L+₹5.9 L (14.2%)Rejected-Finance PLOT NO 28 B NAHAR SINGH JI KA HATHA BHATI CIRCLE RATANADA JODHPUR RAJ 342011 | JODHPUR | JODHPUR | RAJASTHAN | 342011 | L4 | Rejected-Finance Rejected being L4 | |
| 5 | L5₹49.0 L+₹7.9 L (19.1%)Rejected-Finance MARYADA 111 SHIKARGARH KANHAIYA NAGAR JODHPUR 342001 | JODHPUR | RAJASTHAN | 342001 | L5 | Rejected-Finance Rejected being L5 |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
19 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (ARMY) CENTRAL JODHPUR
GE ARMY CENTRAL MULTAN LINES ARMY AREA JODHPUR
PROVISION OF HARD STANDING WITH ACCESS GATE FOR HEAVY VEH NEAR MH JODHPUR AND PROVN OF TWO WATER CHERRY BATHING COMPLEX NEAR OR LINES BLDG NO P 1 P 2 OF MECH BDE IN THE AREA OF AGE B R I ARMY UNDER GE ARMY CENTRAL JODHPUR
2022_MES_545833_1
GE/J/A OF 2022-23 (9119/E8)
Open Tender
Civil Works
Item Rate
180 days
JODHPUR
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (ARMY) CENTRAL JODHPUR
₹1 L
4 Oct 2022
17 Aug 2022
22 Sept 2022
17 Aug 2022
19 Sept 2022
31 Aug 2022
Amount
Surface excavation not exc 30 cm deep and averaging 15cm deep, and getting out in any type of soil, complete all as specified and as directed.
Removing excavated material to a distance exc 50m but not exc 200 Mtr and depositing at a level not exc 1.5 m above the starting point, complete all as directed by Engr-in-charge.
M&L for hard core of guage not exc 63mm (using broken stone or boulder) deposited, spread and levelled in layers not exc 15cm thick, watered and rolled, rammed to a true surface with 8 to 10 tonne power roller, complete all as specified and as directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, complete all as specified and as directed.
M&L for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and as directed.
M&L for Inter locking pavar block, 80mm thick M-40 Grade, Glossy & rubberised finish of any colour, shape and size, Confirming to IS-15658-2006, Laid over sand cushioning, complete all as specified and as directed. Note: Sand Cushioning shall be paid separately under respective item of BOQ
M&L for squared rubble walling, Jodhpur type, regular course, well bonded, bedded and solidly hearted built in cement mortar 1:4, complete all as specified and as directed.
Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc., not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in any type of soil, complete all as specified and as directed.
Framed work as in door or gates, ornamental type or angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering. Doors etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) including forging item (truss etc) and hanging also fastening and fixing complete.Conforming to Fe 290.Gde E165, complete all as specified and as directed.
M&L for Keyed pointing to regular coursed, stone masonary or brought upto course with cement mortar 1:3, complete all as specified and as directed.
M&L for 25mm thick Granite (of approved colour) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wall cladding and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl 10mmthick rendering in CM 1:4, complete all as specified and as directed.
M&L for Providing, cement concrete Type B-1 1:2:4 (20mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.
M&L for Preparation of newly plastered or unplastered surface and applying two coats of cement base paint over & including one coat of alkali resistant primer, complete all as specified and as directed.
Excavating in post holes or similar holes each not exc 0.50 cu.m, getting out in any type of soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm and removing surplus soil soil to a distance not exc. 50 m, complete all as specified and as directed.
Plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate), as in foundation, filling and mass concrete, concrete block for iron strut or post complete all as specified and as directed .
M&L for steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes confirming to IS:1161-1979 Grade St-240, complete all as specified and as directed.
Rolled mild steel sections like as Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410- W(Gde- E-250) quality- A, complete all as specified and as directed.
Rolled mild steel sections like as Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410- W(Gde- E-250) quality- A, complete all as specified and as directed.
M&L for applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth, including & over a coat of red oxide primer including preparation of surfaces, complete all as specified and as directed.
Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and as directed.
S & F Fibre glass reinforced translucent 2 mm thick plain/ corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof ,wall etc complete all as specified and as directed.
M&L for hard core broken stone of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick, water and rammed to a true surface, with power roller, complete all as specified and as directed by Engr-in-Charge.
M&L 75 mm thick PCC 1:4:8 type D-2 (using 40mm gradded crushed stone aggregate) as in sub base for flooring, complete all as specified and as directed by Engr-in-Charge.
Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level) and removing debris out of MOD land, complete all as specified and as directed by Engr-in-Charge.
Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including 25 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.
M&L for precast cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in kerb stone etc., (of any section as approved by GE) with plain faces, including rounded or chamfered angles, weathering, throating etc., and setting in cement mortar 1:4 complete with joints to match, complete all as specified and as directed by Engr-in-Charge.
Demolition of stone / boulder masonry walling, built in cement mortar, including all quoins, arches, pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and as directed.
M&L for cutting into old masonry to form toothings for bonding in new brick or stone work including making good in cement mortar 1:6, complete all as specified and as directed.
All as per item No 7.00 here-in-above, but except stone.
Precast cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in solid block masonry, 10cm width and setting in cement mortar 1:6 complete all as specified and as directed.
Extra over square rubble stone walling, Jodhpur type, regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing, complete all as specified and as directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as directed.
M&L 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate), as in sub base of flooring etc., incld finishing the surface even & rough to receive tile, complete all as specified and as directed.
M&L for machine cut kota stone slab 18 to 20mm thick, as in flooring, cooking platform, laid and jointed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bed in CM 1:6, complete all as specified and as directed.
M&L for machine cut kota stone slab 18 to 20mm thick, as in riser of steps, skirting, dado and pillar laid and jointed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10 mm thick backing coat in CM 1:4, complete all as specified and as directed.
M&L of 18-20 mm thick machine cut KOTA stone slab as in shelves (Single piece) fixed in walls machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, including rubbing and Mirror polishing, complete all as specified and as directed by Engr-in-Charge.
Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc including removing rubbish to out side MD land complete all as specified and as directed.
M&L for rendering 15 mm thick in cement mortar 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished surface even and smooth with out using extra cement, complete all as specified & directed by Engineer-in-charge.
Racking out joints/ pointing to to squared rubble masonry Jodhpur type, regular coursed, masonry built in cement mortar, coursed or un-coursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering complete all as specified & directed by Engineer-in-charge.
Preparing new plastered or unplastered surfaces and applying one coat wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper on walls, complete all as specified and as directed. Note:- OBD shall be in one or more colours/ shades all as approved by GE.
M&L for preparation of new plastered or un-plastered surfaces of wall by Brooming down or steel wire brushing, scrapping down mass and efflorescent salts and trading oil & greasy spots, washing rubbing down and stopping surfaces and applying two coats of cement base paint approved quality & tint, including & over one coat chalk white, of complete all as specified and as directed.
S&F mild steel frame work as in stairs ,hand rails half round or other stock section or section or core for wooden hand rail straight portion drilled and countershunk for balusters running bars for doors balusters nosing to steps including embeded in concrete and screwing etc hid ties for foof including securing bolts post and struts in fencing including securing bolts post and struts in fencing including cutting tops to shape as directed drilling holes nothing for wire etc., flat iron fillet for necessary drilling boltinh or riveting etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.
Taking up or down 25mm bore GI tubing and connections including cleaning for refixing or credited to contractor complete all as specified and as directed.
All as per Item No. 43.00 here-in-above, but of size 20 mm bore GI tubing.
All as per Item No. 43.00 here-in-above, but of size 15 mm bore GI tubing.
"Refixing" old GI tubing of 25 mm bore, medium grade including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing complete all as specified and as directed.
All as per Item No. 46.00 here-in-above, but of size 20 mm bore GI tubing.
All as per Item No. 46.00 here-in-above, but of size 15 mm bore GI tubing.
S&F 25 mm bore GI tubing medium grade, galvanized, with all fittings fixed to wall, ceilings or laid n floors, complete all as specified and as directed.
All as per Item No. 49.00 here-in-above, but of size 20 mm bore GI tubing.
All as per Item No. 49.00 here-in-above, but of size 15 mm bore GI tubing, including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc., complete all as specified and as directed.
S&F 1000 ltrs capacity rotational moulded polythene water storage tank with lid, white colour, three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed suitable for 20mm bore pipe, complete all as specified and as directed. Make:- Sintex / Rotex as approved by GE
S&F 75 mm bore sand cast iron (soil waste and vent) pipes in any length with or without ears with cement joints laid in trenches or floor, including cutting hole where required, complete all as directed.
S&F CI branch pieces single socketed 'Y' equal or unequal, suitable for 75 mm bore pipe, complete all as specified and as directed.
S&F CI bend with oval acess door fixed to 75 mm bore pipe,complete all as specified and as directed.
S&F 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed.
S&F in repair high quality looking mirror with fancy type beading teak wood colour, size, shape & design as approved by GE, fixed to wall with chromium plated screw area not exc. 2.0 Sqm, Complete all as per specified and directed by Engg-in-charge.
S&F as in repairs Vitreous China wash basin,snow white, size 550 x 400 mm size as per trade pattern, fixed to stone slabs, complete including CP waste coupling & flexible waste pipe and complete all as specified & directed by Engg.in-charge. Make:-Cera Cat. No. S2020137 or equivalent model in Hindware / Parryware as approved by GE
S&F Pillar cock with wall flange chromium plated fancy type quarter turn 15mm bore, complete all as specified and as directed. Make : Jaquar Cat No.OPP-15001PM or equivalent in Kohler/ Cera as approved by GE
S&F PVC connections 450/600mm long, 15mm size with PTMT nuts brass fly and washers on both ends complete all as specified and as directed.
S&F single towel rail 600mm long fixed with chormium plated brass screws, complete all as specified and as directed. Make : Jaquar Cat No. AKP-35711P or equivalent in Kohler/ Cera as approved by GE.
S&F Soap dish holder with flange chromium plated, complete all as specified and as directed. Make : Jaquar Cat No. AKP-35731P or equivalent in Kohler/ Cera as approved by GE
S&F single towel ring suare with square flange fixed with chormium plated brass screws, complete all as specified and as directed. Make : Jaquar Cat No. AKP-35721P or equivalent in Kohler/ Cera as approved by GE.
S&F chromium plated fancy type quarter turn 15mm bore bib cock with wall flange, complete all as specified and as directed. Make : Jaquar Cat No. OPP-15037PM or equivalent in Kohler/ Cera as approved by GE
S & F in repair over head shower rose 80 mm dia round shape single flow ,body and face plate brass with CP ,arm 300mm long joiting to pipe complete all as specified and as directed. Make : Jaquar Cat No. OHS-1757 or equivalent in Kohler/ Cera as approved by GE
S&F angular stop cock with wall flange, chromium plated cast copper alloy, fancy type quarter turn, suitable for 15mm bore, complete all as specified and as directed. Make : Jaquar Cat No. OPP-15053PM or or equivalent in Kohler/ Cera as approved by GE.
S&F in Stop cock with wall flange, regular body, chromium plated fancy type suitable for 15mm bore pipe, complete all as specified and as directed. Make : Jaquar Cat No. CON-083KN or equivalent in Kohler/ Cera as approved by GE
S&F in Stop cock with wall flange, regular body, chromium plated fancy type suitable for 20 mm bore pipe, complete all as specified and as directed. Make : Jaquar Cat No. CON-089KN or equivalent in Kohler/ Cera as approved by GE
S&F in Stop cock with wall flange, regular body, chromium plated fancy type suitable for 25 mm bore pipe, complete all as specified and as directed. Make : Jaquar/ Kohler/ Cera as approved by GE
M&L for non skid ceramic coloured tiles (premium quality) of size 6 to 7 mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, size, shape & shade as approved by GE, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson as approved by GE.
M&L for coloured glazed ceramic tiles (premium quality) of size 300mm x 450mm x 7mm thick on vertical surface of wall, colour/shade of tile as approved by GE, including and over 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white cement / coloured cement to match the tiles (Highlighter pattern) complete all as specified and as directed. Note:- Tile shall be in one or more patterns including highlighters. Make : Kajaria/ Somany/ Johnson as approved by GE.
M&L point wiring using approved colour coding (Red , Black and Green for single phase circuits) as per IS code -694 with valid CML No., with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and sheathed FRLSH cable 1100 Volts grade, ISI marked, in and including heavy duty non metallic PVC rigid conduit of 20mm dia with accessories surface mounting on wall/ column / Tie beam/ floors / roof / ceiling etc, ISI marked with1.6mm thick mild steel/ surface mounted PVC gang box (with earth dolly) (ISI Marked) for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated & sheathed multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly suitable for One light/fan/bell point controlled by one, one way switch, complete all as specified and as directed.
All as per item No. 72.00 here-in-above but with 4.00 Sqmm single core multistanded copper conductor cable for 3 pin 15 Amp socket outlet on independent board, complete all as specified and as directed.
S&F switch piano, flush type, single pole, one way, 5/6 Amps, 230 Volts, ISI Marked, complete all as specified and as directed. Make : Legrand/ ABB/ Schneider
S&F switch piano, flush type, single pole, one way, 15/16 Amps, 230 Volts, ISI Marked, complete all as specified and as directed. Make : Legrand/ ABB/ Schneider
S&F socket outlet, flush type, 2 in 1, single pole, 6 Pin 5/16 Amps, 230 Volts, ISI Marked, complete all as specified and as directed. Make : Legrand/ ABB/ Schneider
S&F lamp holder insulated body polycarbonate type with back plate, complete all as specified and as directed by Engr-in-Charge. Make : Legrand/ ABB/ Schneider
S&F 9 watt LED lamps, ISI marked, complete all as specified and as directed by Engr-in-Charge. Make : Bajaj/Phillips/Havells
M&L ceiling rose, 3 phase / PVC / Polycarbonate, isolated body, ISI Marked, complete all as specified and as directed. Make : Legrand/ ABB/ Schneider
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed. Make : Bajaj Cat No. BCLSB 20 WH or Equivalent in Philips/ Havells as approved by GE.
S&F connecting, and commissioning of street light fitting 35 watt LED , IP-66 protection, single piece pressure dia cast aluminium alloy housing high immpact 4 mm thick heat resistant toughned clear glass cover for lamp and matrix of LEDs in built electronic driver upto 4 KV surge protection device and setting& input power 35 W system lumens 85/W operating voltage 160-260 V contror gear compartment with high voltage, Prewired including 1.20 mtr long 32 mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified Make : Philips/ Bajaj/ Havells
S&F Prewired distribution board (sheet metal enclosures) with suitable rated 200 Amps bus bar for Double door DB's of apporved gauge conforming to IS relevant, IP-43 & IK-09 protection, SPN 8 way, 240 volt, dust & vermin proof, complete all as specified and directed by Engg-in-charge. Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface Make :-Legrand/ ABB / Schneider.
Supply, fixing, testing & commissioning of MCB SPN 63 Amps current carrying capacity, 240 volts, with rupturing capacity 10 KA, 'C' curve type, (ISI marked), with over load and short circuit protection, in the MCB DB's complete with connection complete all as specified and as directed by Engg.-in-charge. Make : Legrand/ ABB/ Schneider
Supply, fixing, testing & commissioning of MCB SP 5 to 32 Amps current carrying capacity, 240 volts, with rupturing capacity 10 KA, 'C' curve type, (ISI marked), with over load and short circuit protection, in the MCB DB's complete with connection complete all as specified and as directed by Engg.-in-charge. Make : Legrand/ ABB/ Schneider
Supply, fixing, testing & commissioning of electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.complete all as specified and as directed by Engg.-in-charge. Make:- Jaguar Cat No. ELENA digital 25 Ltrs capacity Geyser
M&L for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised iron earth lead wire of size 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion, complete all as specified and as directed by Engr-in-Charge. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.
Supply, laying, testing & commissioning of LT UG XLPE insulated, armoured, heavy duty, electric cable with aluminium conductor, 1100 volts grade, size of 2 Core 16 Sqmm nominal cross section in trenches, complete all as specified and as directed. Note:- Earthwork and cable protection work measured and paid seperately.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft/loose soil complete all as specified and as directed .
Returning filling in excavated soil, including spreading , leveling , watering and well ramming in layer n. exc 25 cm complete all as specified and as directed.
Removing excavated soil to a distance not exceeding 50 mtr and depositing where directed complete all as specified and as directed.
Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat, size 300x180mm x40 mm, complete all as specified and as directed.
M&L for dry clean fine river sand as in sand cushioning to underground cable including punning down of sand layer, complete all as specified and as directed by Engg.-in-charge. Note :- Punned thickness shall only be measured and paid.
M&L for GI tubing, medium grade, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with all fittings, of size 40 mm bore, complete all as specified and as directed. Make : Prakash/ Tata/ Jindal
NOTE:- 2 Nos sanction job's quantities are clubbed in this BOQ, which is detailed in the Annexure-I on Sl. Page No. 34 of Tender Document. Therefore, the work and its measurement should be completed keeping in view the Annexure-I.
M/S SUMAN ENTERPRISES
SURESH TRADERS
BEYLIM INFRA
M/S KAUTILYA GARG
m/s vikas construction co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .