Karnataka

Active

Goods

Procurement of Safety Gumboots

Hutti Gold Mines Company Limited

HGML Sr Manager Met Section Hutti | Raichur, Karnataka

Amount: Refer DocsCloses: 10 Aug 2026

Timeline

Published24 Jul 2026
Closes10 Aug 2026
Bid Opening12 Aug 2026

Tender Value

Refer Docs

EMD Value

₹73,500

Closing Date

10 Aug 2026, 9:30 pm

Tender Inviting Authority

Office Inviting Bids

Hutti Gold Mines Company Limited

Contact Person

MANJUNATH KADLER

Office Number

08537276339

Work Description

Procurement of Safety Gumboots

Tender Information

Tender ID

HGML/2026-27/IND0519

Reference Number

HGML/2026-27/IND0519

Tender Type

Open

Form of Contract

Two Tender Document System(Two Cover)

Location

HGML Sr Manager Met Section Hutti

Source Website

Subscribe to view

Documents Required

13 documents required · 12 mandatory · 1 optional

Technical Bid

RequiredAnnual Turnover Certificate/Profit & Loss statement and Balance sheet issued by the chartered Accountant for the year FY 2022-23, 2023-24 and 2024-25

OptionalCompany Registration Certificate

RequiredCopies of ITR for the last three years i.e. FY 2022-23, 2023-24 and 2024-25

RequiredCopies of Purchase Order for quoted item as a proof for past experience

RequiredCopy of Dealership Certificate in case of Dealers or Distributors

RequiredCopy of GST Registration Certificate

RequiredCopy of PAN Card

RequiredDuly filled technical bid A should be attached in Technical Bid and format can be downloaded from enclosure

RequiredDuly filled technical bid B should be attached in Technical Bid and format can be downloaded from enclosure

RequiredDuly filled, signed and with seal copy of Standard Tender Document NIT should be attached in Technical Bid and format can be downloaded from enclosure

RequiredSmall Scale Industries Certificate, if applicable

RequiredThe bidder should submit an affidavit authenticating the documents produced during the submission of technical bid as per Annexure-III

RequiredUndertaking as per Technical D should be attached in Technical Bid and format can be downloaded from enclosure

Eligibility Criteria

Tenderers should not be associated, or have been associated in the past, directly or indirectly, with a firm or any of its affiliates which have been engaged by the Purchaser to provide consulting services for the preparation of the design, specifications, and other documents to be used for the procurement of the goods to be purchased under this Invitation of Tenders.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

The payment and validity period in technical bid B & D should be same.

As the Government of India has implemented Goods and Service Tax (GST) from 1st July 2017, Hence Bidders are required to quote accordingly in lieu of Taxes, Duties etc.

Bidder shall give undertaking that they have accepted our terms regarding Delivery, Validity & Payment as per format enclosed.

The document submitted by bidder in Kpp portal shall not be in corrupted/ damaged/protected format.

Bidders shall upload all the Documents in PDF format only.

As approved by competent authority payment terms is amended to WITHIN 30 DAYS AFTER RECEIPT OF MATERIALS

The bidder shall be required to execute an agreement on a government stamp paper on the value required and shall provide Security Deposit (SD) for a sum at 5% of the value of order in the form of DD issued by any nationalized bank drawn on State Bank of India payable at Hutti in favor of The Hutti Gold Mines Co, Ltd or through bank guarantee (BG) issued by public sector banks (refer annexure-I), within 14 days from the date of intimation of acceptance of tender. In case if the SD is not provided with in stipulated period, then the same will be recovered from the first supply bill and if the amount of the first supply bill is not sufficient, the balance will be recovered in the second bill and so on till entire recovery of the SD amount. If any tenderer fails to execute the agreement within the stipulated period, the EMD of such tenderer will be forfeited by the company

As per the Government Orders vide FD/165/EXP 12/2017 dated: 21/03/2017 and FD/539/EXP-12/2017 dated: 02/06/2017, the option of uploading documents in financial bid section is disabled. a. Only landed price shall be mentioned in e-portal which shall be inclusive of all taxes, duties, P&F, freight, other charges, etc. This dashboard price only be considered for price comparison. b. If the bidder quotes in e-portal as exclusive of taxes and become L1, then the purchase order will be made on L1 bidder considering his dashboard price as inclusive of all taxes, etc. If the bidder fails to execute the order, EMD will be forfeited.

If price bid is submitted in technical bid, then EMD will be forfeited and your offer will be REJECTED.

Bidder should submit duly filled, signed and with seal copy of Technical Bid-B, Technical Bid-D, Technical Bid-A and the HGML standard tender document(NIT), which is uploaded in HGML Kpp portal.

Sample Clause: All the bidders are required to submit the sample piece of one pair of shoes which shall reach our Main store within 10 days from last date of bid submission. Non-supply of sample within the stipulated days will lead to disqualification of bidder in technical evaluation.

All other terms and conditions are as per HGML standard tender document (NIT).

Technical Criteria

Past Experience

The bidder should have experience in supplying same items. Experience Requirement Clause a. If the bidder is manufacturer, then they should have manufactured and supplied the same items. The quantity supplied should be at least 80% of the total quantity required under this tender in any one of the following financial years: 2022-23, 2023-24 and 2024-25. Note: For Micro and Small Enterprises (MSEs), the minimum supply requirement shall be 40% in any one of the following financial years: 2022-23, 2023-24 and 2024-25. b) Tenders submitted by authorized representatives/agents of eligible manufacturers may also be considered, provided the following conditions are met: 1. The Manufacturer must meet the eligibility criteria mentioned above in full and must furnish an authorization letter in the prescribed format, assuring full guarantee and warranty obligations for the goods supplied. 2. The Authorized Representative/Agent must have supplied supplied 30% of the tendered quantity during any one of the financial years: 2022-23, 2023-24 or 2024-25. Note: All tenderers must enclose relevant supporting documents, such as Purchase Order copies, as proof of compliance with the above criteria.

Others -- Relevant documents

Capabilities of Vendor

The manufacturers or authorized dealers/distributors are eligible. The authorized dealers/ distributors shall submit valid authorization letter from the manufacturer in the letterhead as per prescribed format mentioned in Annexure- II.

Others -- Relevant documents

Financial Status

Financial Capability: a) The average annual financial turnover of the tenderer should not be less than Rs.37 Lakhs, during the last three preceding financial years, namely: FY 2022-23 FY 2023-24 FY 2024-25. b) In case of Micro and Small Enterprises (MSEs), the required average annual financial turnover shall be Rs.18.50 Lakhs, during the last two preceding financial years: FY 2023-24 FY 2024-25. The tenderer shall furnish the following as documentary proof for the financial capability criteria 1. Annual Turnover Certificate for the relevant financial years, duly certified by a Chartered Accountant, OR 2. Audited Balance Sheet and Profit & Loss Statement for the relevant financial years, duly certified by a Chartered Accountant.

Others -- Relevant documents

Others

Company Registration Certificate

Others -- Relevant documents

GST Registration Certificate

GST Registration

Copy of PAN Card.

Others -- Relevant documents

Copies of ITR for the three years i.e. FY 2022-23 2023-24 and 2024-25 to be enclosed.

Others -- Relevant documents

Copies of Purchase Order for quoted item as a proof for past experience

Others -- Relevant documents

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹73,500

Important Dates

Last Activity

24 Jul 2026

Published

24 Jul 2026

Bid Opening

12 Aug 2026

Download Ends

31 Jul 2026

BOQ Preview

•

SAFETY GUM BOOT, SIZE - 12 COLOUR TAN IS 12254 OF 2021 THE FOOT WEAR SHALL BEAR MARKING OF BIS LICENSE WITH RELEVANT IS NO ALONG WITH DECLERATION STATING THAT IT IS SUITABLE FOR USE IN MINES EACH BOOT IS PARMANENTLY MARKED WITH MANUFACTURER S NAME/ MODEL, MONTH & YEAR

•

SAFETY GUM BOOT, SIZE - 11 COLOUR TAN IS 12254 OF 2021 THE FOOT WEAR SHALL BEAR MARKING OF BIS LICENSE WITH RELEVANT IS NO ALONG WITH DECLERATION STATING THAT IT IS SUITABLE FOR USE IN MINES EACH BOOT IS PARMANENTLY MARKED WITH MANUFACTURER S NAME/ MODEL, MONTH & YEAR

•

SAFETY GUM BOOT, SIZE - 10 COLOUR TAN IS 12254 OF 2021 THE FOOT WEAR SHALL BEAR MARKING OF BIS LICENSE WITH RELEVANT IS NO ALONG WITH DECLERATION STATING THAT IT IS SUITABLE FOR USE IN MINES EACH BOOT IS PARMANENTLY MARKED WITH MANUFACTURER S NAME/ MODEL, MONTH & YEAR

•

SAFETY GUM BOOT, SIZE - 9 COLOUR TAN IS 12254 OF 2021 THE FOOT WEAR SHALL BEAR MARKING OF BIS LICENSE WITH RELEVANT IS NO ALONG WITH DECLERATION STATING THAT IT IS SUITABLE FOR USE IN MINES EACH BOOT IS PARMANENTLY MARKED WITH MANUFACTURER S NAME/ MODEL, MONTH & YEAR

•

SAFETY GUM BOOT, SIZE - 8 COLOUR TAN IS 12254 OF 2021 THE FOOT WEAR SHALL BEAR MARKING OF BIS LICENSE WITH RELEVANT IS NO ALONG WITH DECLERATION STATING THAT IT IS SUITABLE FOR USE IN MINES EACH BOOT IS PARMANENTLY MARKED WITH MANUFACTURER S NAME/ MODEL, MONTH & YEAR

•

SAFETY GUM BOOT , SIZE - 7 COLOUR TAN IS 12254 OF 2021 THE FOOT WEAR SHALL BEAR MARKING OF BIS LICENSE WITH RELEVANT IS NO ALONG WITH DECLERATION STATING THAT IT IS SUITABLE FOR USE IN MINES EACH BOOT IS PARMANENTLY MARKED WITH MANUFACTURER S NAME/ MODEL, MONTH & YEAR

•

SAFETY GUM BOOT, SIZE- 6 COLOUR TAN IS 12254 OF 2021 THE FOOT WEAR SHALL BEAR MARKING OF BIS LICENSE WITH RELEVANT IS NO ALONG WITH DECLERATION STATING THAT IT IS SUITABLE FOR USE IN MINES EACH BOOT IS PARMANENTLY MARKED WITH MANUFACTURER S NAME/ MODEL, MONTH & YEAR

•

SAFETY GUM BOOT, SIZE- 5 COLOUR TAN IS 12254 OF 2021 THE FOOT WEAR SHALL BEAR MARKING OF BIS LICENSE WITH RELEVANT IS NO ALONG WITH DECLERATION STATING THAT IT IS SUITABLE FOR USE IN MINES EACH BOOT IS PARMANENTLY MARKED WITH MANUFACTURER S NAME MODEL MONTH & YEAR

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

technical bid d.pdf

Technical Information / Worksheet • 0.27 MB

technical bid - b.pdf

Technical Information / Worksheet • 0.34 MB

NIT_Gumboots.pdf

Others - Standard tender doc NIT • 1.29 MB

Technical bid-A.pdf

Technical Information / Worksheet • 0.22 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].