Supply and Installation of work stations and Office Furniture to the Executive Engineer-VI Office, TTD, Vijayawada

Supply and fixing of Godrej - Ascent Table with ERU Overall - W:2100mm x D:1600mm x H:765mm (Main Desk - W:2100mm x D:727mm x H:765mm ERU - W:1600mm x D:500mm x H:650mm) MAIN TOP :1800X795MM ; Particle-board ( Melamine Finish) 25mm Top + 15mm frame; 2mm PVC Lipping on top and 0.35mm PVC Lipping on frame. MODESTY PANEL : 1100X405X 16mm THK Particle-board ( Melamine Finish) ; with 0.35mm THK PVC Lipping. DRAWER FRONT : 500X170X 16mm THK Particle-board ( Melamine Finish) ; with 0.35mm THK PVC Lipping. KBPT : 578 (W) X 284 (D) X 16mm THK Particle-board ( Melamine Finish) ; with 0.35mm THK PVC Lipping. ERU : 1600 (L) X500 (W) x 650 (H) all panels are 16mm THK Particle-board ( Melamine Finish) with 0.35mm THK PVC Lipping. Product Certificates : Test Certificate

Supply of Godrej - Thrill Mesh Plus High back Chair SEAT/BACK ASS EMBLY: The seat is made up of 1.5 ±0.1 cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded Polyurethane foam. The seat has extra thick foam on front edge to give comfort to popliteal area. The Back is injection moulded in glass filled Polypropylene which is upholstered with Mesh fabric. The back consist of adjustable lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 ±0.1 cm. The chair seat & back size are SEAT SIZE - 53.5 cm. (W) x 51.0 cm. (D) MESH BACK SIZE - 51.0 cm. (W) x 70.0 cm. (H).HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m3 and hardness 16±2 kgf as per IS:7888 for 25%compression.ARMRESTS : The height adjustable armrest is made of glass filled Nylon and can be adjusted to 6.0±0.1 cm height. It also has swivel and To and Fro adjustment with moulded PU arm top. CENTER TILT SYNCHRO MECHANISM WITH SEAT SLIDE & MULTI LOCK: The mechanism is designed with the following features: 360° revolving type.3 position locking with anti shock mechanism. Seat depth adjustment of 6.0 ±0.5cm. can be locked in 6 positions. Tilt tension adjustment. HEADREST: The Headrest sub-assembly is made up of injection moulded glass filled Polypropylene which is upholstered with moulded HR polyurethane foam and fabric. It has an adjustment of 4.0 ± 0.1 cm & it is assembled over Thrill mesh back chair. The complete headrest assembly is retro fit to the main chair. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 9.5 ± 0.3cm.PEDESTAL ASSEMBLY: PEDESTAL ASSEMBLY: The pedestal is high Pressure Die cast Polished Aluminium and fitted with 5 No's twin wheel castors. The Pedestal pitch center dia is 65.0+-0.5cm.Twin wheel castors - The twin wheel sofa castors are injection moduled in black Nylon with PU lining having 6.0+-0.1cm wheel Diameter. Product Certificates : Test Certificate, Indoor Advantage™ Gold, Green Guard, Bifma Level2 and Green Pro.

Supply and fixing of Godrej - Fineness Table + ERU Pedestal Table - W:1500mm x D:750mm x H:740mm ERU - W:1050mm x D:450mm x H:705mm Pedestal : W:390mm x D:440mm x H:646mm Table: This fine range of post formed desks are complemented by side units and storage unit options to form the complete suite and are available in different sizes and colour options table top & side panels 25mm thick plain particle board (PPB) clad with 0.6mm thick post formed laminate and 1mm thick backing laminate (BDL). Flat edge duly sealed with 2mm thick PVC beading. And modesty : 18Mm thick plain particle board (PPB) clad with 1.0mm thick decorative laminate (DL) on both sides. Edge sealed with 2mm thick PVC beading. Dimensions are 1500 Width x 750 Depth x 740 Height. Pedestal: Manufacture, supply and delivery of Free standing Pedestal with Castors of size 646 H x 390 W x 435 D. pedestal is made of 0.6 mm thick CRCA sheet with 3 drawers of combination of Box + Box + File options. Product Certificates : Test Certificate

Supply of Godrej - Thrill Mesh High back Chair SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded Polyurethane foam. The seat has extra thick foam on front edge to give comfort to popliteal area. The Back is injection moulded in glass filled Polypropylene which is upholstered with Mesh fabric. The back consist of adjustable lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 ±0.1 cm. The chair seat & back size are SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D) MESH BACK SIZE 51.0 cm. (W) x 70.0 cm. (H)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression ARMRESTS :The adjustable armrest is designed with the following features : Up-Down adjustment– 6 steps (7.2 ± 0.5cm range) Armrest top is mounted on Armrest structure made of glass filled Nylon Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360° revolving type. 3 position locking with anti shock mechanism. Tilt tension adjustment PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 9.5 ± 0.3cm.PEDESTAL ASSEMBLY : The pedestal is injection moulded in glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors).TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon The complete headrest assembly is retro fit to the main chair. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 9.5 ± 0.3cm. Product Certificates : Test Certificate, Indoor Advantage™ Gold, Green Guard, Bifma Level2 and Green Pro.

Supply and fixing of Godrej - T 25 Table - W:1500mm x D:750mm x H:750mm Main Worktop: Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS- 12823 :1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Return Worktop: Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty Panel: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Legs-Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded together by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveller fitted which allows for adjustment of the height up to 50mm.Cross Members: Cross Members in Unitized T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating. Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table. Access Flap-Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles. Power Box-Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cut out provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position. Integrated Hinge Door Storage with Drawer: Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Door is fixed with slide on hinges and handle is provided for ease of opening. Drawer is provided with ebco metabox slide and lock for security. Product Certificates : Test Certificate, Indoor Advantage™ Gold, Greenpro, GRIHA and Greenguard

Supply of Godrej - Oxbo High back Chair SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam. BACK ASSEMBLY: The back assembly should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm (W) x 60.5 cm (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. CENTRE-TILT mechanism: The mechashould be m should be designed with the following features: • 360° revolving type. • 17° ±2° maximum tilt on pivot at centre • Upright position locking. • Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSY: The bellow should be 3 piece telescopic type and injection moulded in Black Polypropylene. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors.) TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black nylon. Product Certificates : Test Certificate, Greenpro, GRIHA, Bifma Level 2 and Indoor Advantage™ Gold

Supply and fixing of Godrej - 4 STR PLUS CLUSTER with MIDDLE FIN 60X60 With KBPT,CPU and 3 Drawer Pedestal Seating - 16 No's 52 mm Thick Main Spine and 23 mm side fin. The uprights and horizontals shall be made of aluminum extrusion having material AL96063-T6 & have average wall thickness of 1.2 mm & powder coated with epoxy-polyester powder. Fabricated bottom frame for 52.4mm shall comprise of L- Channels made of 2mm thick CRCA steel (IS:513), formed plates of 3mm thick HR steel (IS:2062) & ERW steel tube of size 35x15x1.6mm in oval cross section (IS:7138) welded together. This shall be coated with average 50 to 60 micron thickness of epoxy powder coating. This shall be bolted to the uprights with M6 screws. legs shall be fabricated by CO2 welding MS Tube of section 38 mm x 25 mm (IS: 7138 ERW Tube) with the base plate of the MS plate of which an M8 Leveler shall be fitted, which shall allow for adjustment of the height by 50mm. this shall be coated with min. 45 micron thickness of epoxy powder coating. 52 mm thk panel to be provided with two top tiles 1 nos White Board and 1 no magnetic fabric tile above the table top . Middle 2 Blocks of the Main partition should have - blocks made of honeycomb structure wrapped outside with fabric, Bottom Tile should be of Metal. panels elevated from floor by 120 mm , l. Wire Management - Electrical switches to be mounted above table top & Data on bottom Metal tile. Work top- Made of 25 mm thick MDF board with polyurethane (PU) edge on all sides i.e., beading on all sides. (For table top Size , profile & Grommet provision-refer attached layout). All Metal components are to be made from CRCA. All the MS components should under go 7 step rust resistance pre treatment process viz degreasing, pickling as per IS standard. After pre treatment process, the steel should be nano coated and passivated for better adhesion of paint as per IS 3618 - 1996. The passivated steel should be powder coated with epoxy polyester powder to the thickness of 50-60 microns as per IS 101 and oven baked at 180 degrees for getting the scratch resistance finish. Product should undergo the following testing process for durability and functionality Cross cut test for ensuring adhesion of power coating as per IS std Salt spray test for500 hours for ensuring the rust resistance pre treatment process as per IS standard. Also provide Nova 3drawer mobile pedestal, Metal Keyboard Tray and Metal CPU Trolley along with each workstation. Product Certificates : Indoor Advantage Gold, GRIHA & SVAGRIHA Council, Green Guard UL 2818 - 2022 Standard for Chemical Emissions, Greenpro-CII Green Products,

Supply of Godrej - Oxbo Visitor Chairs SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D) BACK ASSEMBLY: The back assembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm. (W) x 60.5cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS: The one-piece armrests should be injection moulded from black Copolymer Polypropylene. TUBULAR FRAME: The powder coated (DFT 40-60.microns) tubular frame should be cantilever type & made of Ø2.54 ±0.03cm. x 0.2 ±0.016cm thick M.S.E.R.W. Tube. Product Certificates : Test Certificate, Greenpro, GRIHA, Bifma Level 2 and Indoor Advantage™ Gold

Godrej - Oxbo Midback Chair SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D). BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE : 46.5 cm (W) x 60.5 cm (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. CENTRE-TILT mechanism: The mechashould be m should be designed with the following features: • 360° revolving type. • 17° ±2° maximum tilt on pivot at centre • Upright position locking. • Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. TELESCOPIC BELLOW ASSY: The bellow should be 3 piece telescopic type and injection moulded in Black Polypropylene. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors.) TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black nylon. Overall Dimensions of Chair Seat Height - min 43.3 to max 54.3cm. Height - min 89.5 to max 100.5cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm. Product Certificates : Test Certificate, Greenpro, GRIHA, Bifma Level 2 and Indoor Advantage™ Gold

Supply & fixing of GLASS SUPPORT: Framing above glass partitions for support with 50 X 50 MM wooden batten framing up to slab level including acoustic sound blanket cavity covered with single layer Gypsum board from both side

Supply & fixing of FULL HEIGHT 12MM THK. TOUGHENED GLASS PARTITION: P/F 12 mm thick glass full height glass .The works includes fixing of glass with Top & Bottom surfaces with proper support/frame. Including silicon sealant filling between glass joints

Supply & fixing of TOUGHEN GLASS DOORS': Providing & fixing 12 mm thick toughened glass Doors with reputed make floor spring, Parch fitting, S.S. Handle 16'' long, Door Lock, Door stopper, and all fittings, hardware etc. complete in all respect. Door Size : 8 X 3

Supply & fixing of FROSTED FILM: Providing and pasting frosted film on glass work as required & as directed