SUPPLY AND REPLACEMENT OF AAAC COVERED CONDUCTOR IN PLACE OF OLF RABBIT CONDUCTOR FROM 33 KV SUB STATION MUNSYARI TO CHANDANI UNDER EDD DHARCHULA

Amount

SUPPLY OF FOLLOWING DE-CENTRALISED MATERIAL

Supply of Bracing Set Clamp for Top 33 KV SP-33 made of 100X50 mm. MS Flat with Nut & Bolt Duly Red Made Oxide Painted without Cut Welding and Burr Complete as per Specification

Supply of Top channel Clamp for SP-33 made of 100x50 mm. MS Flat with Nut & Bolt Duly Red Made Oxide Painted without Cut Welding and Burr Complete as per Specification

Supply of stay clamps M.S. Flat 50x6 mm. including with Red Oxide Paint. as per UPCL specification with Nut & Bolt SP-33, Pole

Supply of Bracing Set Clamp for bottom 33 KV SP-33 made of 100X50 mm. MS Flat with Nut & Bolt Duly Red Made Oxide Painted without Cut Welding and Burr Complete as per Specification

Supply of IPC WITH ALUMINIUM BAIL FOR EARTHING 03 No/KM(11KV 70 to 99 sqmm) AL59-ACS Complete as per Specification

Supply of 11 KV CABLE TIES FOR PIN INSULATOR sutable for ACS AL-59 SQ.M. COVERED CONDUCTOR Complete as per Specification

Supply of 11 KV IPC 70sqmm MVCC FOR COVERED TO COVERED COND sutable for ACS AL-59 SQ.M.. COVERED CONDUCTOR Complete as per Specification

Supply of 11 KV IPC 70sqmm MVCC FOR COVERED TO BARE COND sutable for ACS AL-59 SQ.M.. COVERED CONDUCTOR Complete as per Specification

Supply of 11 KV MID SPAN JOINTING KIT sutable for ACS AL-59 SQ.M.. COVERED CONDUCTOR Complete as per Specification

Supply of 11KV ACS AL-59 SQ.M.COVERED CONDUCTOR, covers design, manufacture, testing, inspection, packing and dispatch, to destination of (AL59), thickness(Aluminium alloy wire, Extruded longitudlnal water blocking layer, Extruded semi conductive layer, inner insulation of XLPE withour carbor black & outer insulation with UV & track resistant XLPE), specified herein for their satisfactory operation in distribution line as per Specification

Supply of 11 KV TENSION CLAMP WITH hardware & tracking BAIL & IPC sutable for ACS AL-59 SQ.M.. COVERED CONDUCTOR Complete as per Specification

LABOUR CHARGE

Cartage of ST Pole & other material by road transport from ESC Haldwani to road side of work inculding loading unloading and stacking at safe place Avg distt 100-150 Km Approx

ST Pole 9.00 M 410 SP-33

Small material

Head load Cartage of Pole & Other material by road side to wotk side Approximate distance 1 km.

ST Pole 9.00 M 410 SP-33

Small material

REMOVING OLD CONDUCTOR BY OPENING JUMPER

Dismantling of existing HT line. including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light co nnections etc. including rolling of conductor and cartage back from site to JE store(ACSR Rabbit)

Exavation of earth for pole pit of size 0.9x0.6x1/6 of full lenth of pole for erection of pole in all types of soil including proper dressing of sides and ramming of bottom including getting out the excavted soil and disposelof surplus and disposel of surplus excaveted soll as directed complete work.

Steel pole 9 mtr. SP-33 (BPHD)

Erection of following support of pole in proper leval and alignment alongwith fixing of all accessories like top channel & clamps as per RESSPO construction manual.

Double pole of SP-33

Grouting of pole in size 0.45x0.45x1/9 of the support in CC ratio 1:4:8 block including cost of cement sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling.

ST Pole 9.00 M 410 SP-33 (BPHD)

Muffing of poles with CC1;3;6 block and 45 Cm hight from ground level including cost of ballast, cement & sand

Making of MS Channel, angle iron after cutting in requeired sizes with drilling of holes upto good finish for top channel, bracing and special type bracket etc as per RESSPO

Exavation of earth for stay pit size 0.6x0.6x1.2 mtrin all types of soil including proper dressing of sides and ramming of bottom including getting out the excavted soil and disposelof surplus and disposel of surplus excaveted soll as directed complete work.

Fixing,tightining and nozzaling of stay with pole and stay rod on required tension as per drawing /resspo manual for 11KV line

Grouting of stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 block including cost of cement sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling.

FIXING OF IPC WITH ALUMINIUM BAIL FOR EARTHING PER KM

Fixing of 11 KV 90 KN Tension Clamp with Bail and IPC

FIXING OF 11 KV MID SPAN JOINTING KIT

Fixing of 11 KV IPC For covered to covered conductor

Fixing of 11 KV IPC For covered to bare conductor

LAYING SPREADING,STRINGING SAGGING of AAAC CONDUCTOR

11 KV CABLE TIES FOR PIN INSULATOR.

Back Cartage of other material by road transport by road transport from road side to ESSC Pithoragarh approx distance 51-70 Km including loading & unloading and stracking both ends.

Small material

vijay electricals (BID ID -373677)

WALDIA AND SONS (BID ID -373659)