Annual maintenance contract for Execution of emergency civil work (misc. work, addition, alteration etc.) to be carried out in various premises/offices of Vishwamitri East Division under Baroda City Circle for the year 2026-27.

Name Of Work: Annual maintenance contract for Execution of emergency civil work (misc. work, addition, alteration etc.) to be

carried out in various premises/offices under Vishwamitri East Division for the year 2026-27.

Sr No. Description Unit Rate

Demolition & Dismatalling

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all

lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal

of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and lift.

Dismentaling of wooden floors/ PVC carpet flooring including stacking of serviceable materilas and

4 disposal of unserviceable materials with all lead and lift. SMT

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable

5 materilas and disposal of unserviceable materials with all lead and lift.(i) G.I.sheet roofing. SMT

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable

6 materilas and disposal of unserviceable materials with all lead and lift.(ii) A.C. sheet roofing. SMT

Dismentling steel work including distempering and stacking the materials with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves,

8 holdfasts and other attachment etc. complete and stacking them within all lead and lift.(i) Not Each

exceeding 3 Sq.M. in area.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves,

9 holdfasts and other attachment etc. complete and stacking them within all lead and lift.(ii) Each

Exceeding 3 Sq.M. in area.

Dismentling barbed wire in fencing including making rolls and also including dismentling fencing posts

including all earth work concrete in base and making good the disturbed ground stacking useful

10 materials as directed and disposing as directed and disposing of the unserviceable materials with all RMT

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps including

stacking the materials with all lead and lift ( for any dia, of pipe)

Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing tank etc.

including stacking the materials with all lead and lift.

Scraping oil paint from steel and other metal surface and making the surface even (with Hand

Removing and scraping of old deteriorated plaster of any thickness from wall / R.C.C member

14 including stacking of serviceable material and disposal of unserviceable from site of work with all SMT

Removing existing TW partitions including all Doors, windows, Glass, hardware etc including stacking

of serviceable materials and disposal of unserviceable materials with all lead and lift and the site

15 shall be cleaned as directed by EIC. Care shall be taken to remove the partition / door so as to reuse SMT

Dismantling aluminium/ Gypsum partitions, ACP clading, doors, windows, fixed glazing and false

ceiling including disposal of unserviceable material and stacking of serviceable material with in

16 meters lead as directed by Engineer-in-charge. Work complete including all type of tools, tackles, SMT

scaffolding etc complete as per instruction of Architect/EIC.

Removal of loose concrete, races of shoots, grease, oil etc from beams, column, chajjas, projection,

lintel etc using impact high frequency hammer/chisels without damaging the eisting concrete (if

17 required) and by wire brush(metallic brushes only) including cleaning of existing concrete surface SMT

carefully. The item includes all necessary machinery, scaffolding, including disposal of un serviceable

materials etc.comp. as directed by EIC.

Throwing away debried and unwanted material away from site at suitable locations by means of

tractor and trailer trip upto any lead & lift.

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in

21 layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering. CMT

Filling in plinth with sand under floors including watering ramming, consolidating and dressing

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc. complete.

Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including watering,

remming and consolidating etc. complete.

Collecting, Carting and unloading materials like crushed stonegreet, chipping, quarry spill,/grit, etc

of appd.Quality from quarry and spreading in required layers leveling etc.camber including applying

25 road roller for compaction etc.complete with all lead and lift as directed by EIC. CMT

Providing and Laying Controlled cement concrete M20 for trimix RCC excluding the cost of

reinforcement & including of using 125micron polythene sheet at base of concrete, using approved

quality polyester fiber (12mm) during mixing of cement concrete(@125gm per bag) and or as per

manufacturer's specification including preparing the sub base with form work of M.S Chanel of

required size to maintain level and slope of concrete with using surface vibrator, finishing the surface

with power floater and trove, light brooming on the surface with providing construction joints of size

26 10 mm wide 25mm deep in transverse direction @4.5m C/C with sealing the same with approved CMT

quality bitumen sealent and providing expansion joints of size 25 mm width and upto through depth

of concrete using 25mm thick Dura Board HD-100 of approved quality and sealing the same with

approved quality bitumen sealent at 40meter C/C and or as directed using concrete cutter machine

with necessary equipments, labors tools tackles etc complete as dircted by EIC.

Providing supplying and spreading / mixing "CHAPDUR" chemical for smooth and luster finish of top

27 surface of road (Note: Chemical is to be used as per manufacturers specification and instruction given SMT

by EIC having consumption of 4.00 KG per SMT

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone

28 aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A) Foundation CMT

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken stone

29 aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation CMT

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- crushed stone aggregates

30 20 mm nominal size) and curing complete including cost of formwork in (A) Wall Caps / Coping CMT

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in

position complete upto floor two level

P/L controlled cement concrete M 200 and curing complete including the cost of form work and

32 excluding reinforcement for reinforced complete work in foundation footings, Base of columns and CMT

P/L controlled cement concrete M 200 and curing complete including the cost of form work and

33 excluding reinforcement for reinforced complete work in(C)- column, pillars posts and struts up to CMT

floor two level, -For column.

P/L controlled cement concrete M 200 and curing complete including the cost of form work and

excluding reinforcement for reinforced complete work in(C)- Beam up to floor two level.

P/L controlled cement concrete M 200 and curing complete including the cost of form work and

35 excluding reinforcement for reinforced complete work in(C) Lintel, chhajahs, Shelvas etc. up to floor CMT

P/L controlled cement concrete M 200 and curing complete including the cost of form work and

excluding reinforcement for reinforced complete work in(C)-Slabs

Brick work using common burnt clay building bricks having crushing strength not less than

37 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional CMT

Do as above - but for Brick work in superstructure above plinth level up to floor two level including

parapet/ stair cabin.

Brick work using common burnt clay building bricks having crushing strength not less than

39 35kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand) (C) Fly Ash CMT

Do as above - but for Brick work in superstructure above plinth level up to floor two level including

parapet/ stair cabin.

Half brick masonry in common brunt clay building bricks having crushing strength not less than

41 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in foundation and plinth (B) SMT

Do as above - but for Brick work in superstructure above plinth level up to floor two level including

parapet/ stair cabin.

Half brick masonry in common brunt clay building bricks having crushing strength not less than

43 Kg/Sq.Cm. in Cement mortar 1:4 (1-Cement : 4 -coarse sand ) in foundation and plinth (C)Fly Ash SMT

Do as above - but for Brick work in superstructure above plinth level up to floor two level including

parapet/ stair cabin.

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows including Indian

teak wood frames 10 cm x 7 cm. size including anodized alluminium fixtures and fastenings including

45 primer coat of approved quality and two coats of oil painting etc, complete. (i) Fully Glazed. SMT

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows including Indian

teak wood frames 10 cm x 7 cm. size including anodized alluminium fixtures and fastenings including

46 primer coat of approved quality and two coats of oil painting etc, complete. (ii) Fully Panelled. SMT

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows including Indian

teak wood frames 10 cm x 7 cm. size including anodized alluminium fixtures and fastenings including

47 primer coat of approved quality and two coats of oil painting etc, complete. (iii) Partly panelled and SMT

Providing and fixing 35 mm thick Decorative type Water proof flush door shutters, solid core

construction with wood frame with Polish of first class hard-wood with cross band and face ply-wood

48 face panels, 1.0 mm thick laminate on both sides including Stainless steel fixtures and fastening like SMT

tower bolt, stopper including for door shutters sides etc complete. as directed by engineer in

charge.(Measurement Shall be Consider L X H)

Providing anfd fixing F.R.P. frame size 100x50mm and 28mm thick FRP Depressed panel shutter

having extra reinforcement on sides and edges in gel coat finish . The core of shutter and frame is to

be filled up with injected fire retardant grade polyurethene foam done in situ along with embedded

49 wooden pieces for stiffening and also taking hinges and fixtures,The whole FRP frame and shutter is SMT

to be water proof weather proof , termite proof and resisitance to mild Alkali/acid. Rates are to be

inclusive of S.S.Hinges with necessary screws, alluminium fixtures and fastening and fasterner sleeve.

Providing and fixing 30mm thick FACTORY MADE SOLID PANEL PVC DOOR SHUTTER consisting of

frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15mm x

15 mm for top and bottom rails. M.S. frame shall have a coat of steel primers of approved make

and manufacture, M.S. frame shall be covered with 5 mm thick heat moulded PVC ‘C’ channel of size

30 x 50 mm forming stiles, and 5mm thick 75mm wide PVC sheets for top rail, lock rail and bottom

rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail

50 and bottom rail, Paneling of 5 stiles and rails with 30mm wide x 5mm thick PVC sheet beading on SMT

eighter side, and joined together with solvent cement adhesive,. An additional 5mm thick PVC strip

of 20mm width is to be stcuk on the interior side of the ‘c’ channel using PVC solvent cement

adhesive etc. complete as per direction of Engineer in charge, manufacture’s specification and

Providing and fixing 30mm thick FACTORY MADE SOLID BOTH SIDE PRELAM PANEL PVC DOOR SHUTTER

consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles,

top and bottom rails. M.S. frame shall have a coat of steel primer of approved makde and

manufactures. M.S frame covered with 5mm thick heat moulded prelim PVC ‘C’ channel of siz 30mm

thickness, 70 mm width of which 50mm shall be flat and 20mm shall be tapered in 45 degree Angle on

either side forming stiles, and 5mm thick, 95mm wide pream PVC sheet out of which 75mm shall be

flat and 20mm shall be tapered in 45 degree on the inner side ot form top and bottom rail and

115mm wide prelim PVc sheet out of which 75nmm shall be flat and 20mm shall be tapered on both

side to form lock rail, Top, bottom and lock rails shall be provided either side of the panel. 10mm

(5mm x 2) thick 20mm wide cross PVC sheet shall be provided as gap insert for top rail and bottom

51 rails. Panelling of 5mm thck both side prelim PVC sheet to be fitted in the M.S. frame welded,sealed

to the stiles and rails with 7mm (5mm + 2 mm) thick x 15mm wide PVC sheet beading on inner side,

and joined togeth with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is

to be stuck on the interior side of the ‘C” chanel using PVC solvent adhesive etc. complete as per

direction of Engineering in charge, manufacture’s specification and drawing.

Reduce rate of Rs.2003.00 for Providing and fixing 30mm thick FACTORY MADE SOLID SINGLE SIDE

PRELAM PANEL PVC DOOR SHUTTER

Steel, Aluminum & Iron Work

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats

52 at required spacings and frame alround, square or round bars with round headed bolts and nuts or by KG

screws (A) Plain Grill.

Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or welded in builtup for all type

sections, in framed work, including cutting, hoisting, fixing in position and applying a priming coat of

53 approved steel primer all complete as per the structural designs and directions of Engineer in charge. KG

Providing and Fixing Stainless Steel 304 Grade 16 gauge railing with 38 MM Dia Pipe, & 20 MM Dia

support Kitchen / Duplex make & flanges as per good engineering practice. The end condition of pipe

54 shall be closed with SS Cap & properly grinded. This item is for pipe fixed in wall without any vertical RMT

Providing and fixing aluminium mosquito net with powder coated aluminum framing member size

40mm x 18mm x 1.29mm with centre support & fixtures and transparent silicon sealant applying

55 surrounding edge of framing including all tools and tackels, etc completed as directed by EIC. SMT

Providing and fixing of SS railing of 40 mm dia with SS203 including vertical support at required

56 distance and grouted in floor with all tools and tackles etc completed as directed by EIC. RMT

Providing and fixing aluminum compose panel SUN BOND ALEX OR equivalent for Exterior Facade such

as walls and ceiling and projection by providing Aluminum hollow section of approved quality and

make having section size 38mm x 25mm x 1.2mm thick at maximum spacing of 600mm both direction

with necessary fittings same in line and level and foxing the frame work with anchor fasteners. The

57 aluminum composite panel 4,00 mm thick be fixed on the frame work having thickness of 1.5mm as SMT

per detalls provided in drawing or as directed by EIC. The in between Grooves between Two panels

shall be filled with colour Epoxy as directed by EIC. Necessary cutout for electrical switch board etc.,

may be made as per instruction without any extra cost.

Providing and fixing window having extruded aluminum Colour anodized section horizontal Three

track member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of size

61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of horizontal member size

40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of size 40mm x 18mm x 1.29mm @

58 wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick transparent bronze colour tinted float glass SMT

with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for window. One track of Mosquito net and Two track of window.

Providing and fixing Window having extruded alluminum colour annodized section frame main outer

side 63.50 x 38.10 x 1.95 mm (of Jindal Section No 4605 @ Wt 1.094 Kg/Rmt) horizontal Two Track

member size 61.85 x 31.75 x 1.2 mm (of Jindal Section No 8687 @ Wt 0.695 Kg/Rmt) vertical member

of size 61.85 x 31.75 x 1.3 mm (of Jindal Section No 8758 @ Wt 0.659 Kg/Rmt) with sliding shutters of

horizontal member size 40 x 18 x x 1.29 mm (of Jindal Section No 8949 @ Wt 0.456 Kg/Rmt) vertical

member of size 40 x 18 x x1.29mm (of Jindal Section No 8947 @ Wt 0.456 Kg/Rmt / section 8948, @

wt 0.457 Kg/Rmt ) with 5mm thick tranparent Bronze Colour Tinted Float glass with powder coated

alluminium fittings and fixtures and tranparent silicon sealant glass fixing to frame as per detail etc.

complete for Window. Only mechanical joints shall be used, welding shall Not be permitted.

Concealed lock of Indigo or equivalent and white PVC Gasket is to be utilized in the work. For window

opening more than 2.00 in length equivalent weight with three track should be provided as approved

Providing & Fixing in position partly paneled and partly glazed aluminum partition without door

shutters using Colour anodizedaluminum section. Panels shall be 9mm both side prelaminated MDF

board of "Greenlam" make and glazing shall be make and glazing shall be 5mm thick tinted glass of

"MODI"/ Saint Gobain" as per drawing or as directed. Rate including cost of all materials including

59 gaskets, Aluminum clips having unit weight .097KG/RMT and labour required to complete the job as SMT

per good practice Extruded Aluminum section of Jindal make available in ALLOY 63400 and

TempreWP [HE9WP] corresponding to IS -733 and IS 1285 to be used for Frame single groove

4605,Frame double groove 4604. Only mechanical joints shall be used. Welding shall not be

Providing and fixing fully glased or partly glased Single/double leaf anodized alluminium door using

extruded section fabricated by standard manufacturer with framing 10.15x4.45 cm rectangular

60 section and door shutter made up of 10.15x4.45 cm aluminum bottom section top and vertical section SMT

15x4.45 cm size ans 5.5 mm thick HB4 palin glass with glasing deep rubber gasket with locking

arrangement with all fixtures and fastening of anodized section with alluminium beeding with all

labours and materials.

Providing and fixing slandered extruded fo aluminum section of size 63mm x 38.10mm x 1.2mm

(Jindal Section :2434, @ Wt. 0.643 Kg/mt) with colour anodized aluminum frame for ventilation with

61 5 mm thick frosted glass as detailed etc complete for Ventilation.(The rate is inclusive of providing SMT

mosquito net with cleat on one side)

MS Cupboard shutter: Providing, Fabricating and Fixing in Walls M.S. C.R.C. Japan Sheet Of 20 Gauge

Frame Inside as Per Requirement On Wall, Floor, Celling all around and 20 Gauge Shutter for

62 Cupboard As per Site Requirement with chromium plated fixtures & Fastenings, Loaking arrangement SMT

including applying Red Oxide priming coat and painting 2 coats of synthetic enemel paint of Asian

make approved shade etc. complete as directed By E.I.C.

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of

63 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white SMT

Providing and laying Vitrified tiles 8 to 10 mm thick , 36'' x 36'' in flooring, treads of steps and landing

64 laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush SMT

pointing in white cement.

Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry

Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of steps and dedo on 10mm

66 thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry SMT

Providing and laying marble stone slab flooring over 20mm (average)base of cement mortar 1:6 (1-

67 cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty: 1.5 - coarse sand) laid and jointed with gray SMT

cement slurry including rubbing and polishing complete. (A) Marble slab 25mm thick

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement

mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and

68 jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and SMT

polishing etc. complete. (A) 25mm thick

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars

laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury

69 mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. SMT

Providing & fixing granite in flooring, riser and Treads of steps, partition for drinking water, moulding

70 the edges and grooving if directed, of size not less than1200mm in length and full width of treads in SMT

C.M.1:2 neatly finishing the joints, curing etc. comp as directed by EIC.

Labour charge for providing river sand polishing to kotah stone / granite of required finishing as

directed by EIC including all tools tackles labours etc complete.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including

72 dismentaling of existing flooring and jointed with color cement slurry including finised with flush SMT

pointing & cleaning the surface etc. complete for light shade make VARMORA/KAJARIA/ASIAN

GRANITO INDIA/SOMANY/CERA/NITCO

Vitrified Tile Flooring : Providing and laying Matt finish Vitrified tiles flooring using minimum 10 mm

thick tiles of as per approved make list by architect/client, including preparing base for leveling

with 20mm thick cement mortar 1:6 (1 cement : 6 coarse sand ) and jointed with 3mm thick epoxy

grouting as per approved make of approved shade and colour in proper line and level as per detailed

drawing / instruction and approval by architect. The rate shall be inclusive of protecting the

flooring by plaster of Paris applying and after completion of work remove or 4 mm thick protection

73 sheet of Supreme make EPE+HM Blue. Including cost of all type of tools, tackles, all labour, materials, SMT

transportation, cleaning , at all floor, all level, all depth, all Height, all lead and lift , work complete

as per the detailed drawing, approved sample, specifications and instruction of Architect/EIC. Sample

mock shall be approved from Architect/EIC. (A) Tile size: 800x1600mm, Matt finish tiles.

Vitrified Tile Dedo & Skirting : Providing and laying Glossy finish Vitrified tiles in dado using

minimum 10 mm thick tiles as per approved make list by architect /client. fixed in dado on 10 mm

th. Cement plaster 1:3 (1 cement: 3 coarse sand) All surfaces must be dimensionally stable according

to level, cured, undamaged, compact,rigid,resistant, dry and free from any debonding agents tiles

fixed by approved tile adhesive and all application shall be done under instruction of manufacturer

guideline and specification, and jointed with 3mm thick epoxy grouting as per approved make of

approved shade and colour in proper line and level as per detailed drawing / instruction all complete

as per approved sample by Architect, drawings and instruction of EIC. Including cost of all type of

tools, tackles, all labour, materials, transportation, cleaning , at all floor, all level, all depth, all

Height, all lead and lift , work complete as per the detailed drawing, approved sample,

specifications and instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC.

(A) Tile size: 800x1600mm, Matt finish tiles

P & F 1.5 mm LG or equvivelent make pvc carpet after preparing surface using appropriate adhesive

75 etc complete inclusive of all material and labour and with transportation. SMT

Providing and Fixing wooden/PVC skrting of approved brand and shade of 25 mm or higher average

height including all labour, material, tools, tackels, etc. as directed by EIC.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm

length,30cm height and 15cm thick of M200 grade concret as per approved design and including

77 excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc RMT

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with

grade of concrete M300 pnumatic compressed /vibrated mechanically and as per approved design

78 Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand SMT

in proper line and level as per guidlines of IRC: SP 63-2018 etc. Complete.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of

rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be

79 made separately and stacking of serviceable material within 50 metre lead as per direction of SMT

Engineer-in-Charge.

Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level,

curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling

80 the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver SMT

blocks shall be supplied by the department free of cost).

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and

nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead

81 complete excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet. SMT

Providing ridges or hips 600 mm overall in plain G.I. sheet class-3 fixed with G.I. J or L Hooks and

82 nuts 8mm dia G.I. Limpet and bitumen washer complete. (1) 0.80 mm thick sheet. SMT

Providing valleys 900mm overall in plain 1.6mm thick G.I. sheet fixed with G.I. J or L Hooks, Bolts

83 and nuts glavanised iron J or L Hooks Bolts and nuts 8mm dia G.I. Limpet and bitumen washers SMT

Providing and Fixing 6 mm thick Lexan Polycarbonate multi wall roofing sheet fixed with hilti screw

84 and rubber silicon sealer and alluminium strip of size 50 x 3 mm etc complete as directed by Engineer SMT

Providing & Fixing 0.60 mm thick corrugated pre painted galvalume sheet of Tata

/Jindal/Monakshi/National/Essar or Equivalent ISI marked make for roofing including laying in proper

alignment fixing with nut bolt ,gusset ,tapping screw washer, silicon etc., complete as directed by

85 EIC. The rate is inclusive of all materials, labours, tools tackles, all taxes etc., The payment shall SMT

be made for actual work executed, No extra payment for over lapping shall be paid.

Providing & fixing standard company's 500 to 550 dia Roof extractors-Turbo Ventilator with all

aluminium with integrated and reinforced main bearing housing with Stainless steel shaft, Vari pitch

86 of aluminium including 2mm thick FRP bases matching with roof profile. The Roatating bearings with No

Twin ZZ ball bearings encased in integrated bearing housing assembly.

Providing and fixing 3 mm thick FRP Sheet of approved quality and color with Machine screw fitting

87 etc completed as per directed by EIC. SMT

Providing fixing suspended Gypsum false ceiling 12mm thick (as per design and pattern approved by

the engineer-in-charge. As per includes of providing and fixing GI parameter channels of six 0.55 mm

thick having flange of 30 mm and a web of 27 mm along with parameter of ceiling screw fixed to

brick wall / partition with the help of nylon sleeves and screws at 600 mm centre then suspending GI

channel of size 45 mm X 0.9 mm thick with two flanges of 15 mm each from soffit at 1220 mm centre

with ceiling angle of width 25 X 10 mm X 0.5 mm thick fixed to soffit with GI and steal explanation

fasteners. Ceiling section of 0.55 mm thickness having web of 51.5 mm and two flings of 26 mm each

lips of 10.5 mm are then fixed to intermediate channel with the help of connection clips and

88 indirection perpendicular to the channel at 457 mm centres 12.5 mm tapered edge zip board SMT

confirming to IS 2095- 1982 is confirming to IS 2095- 1982 is confirming to IS 2095- 1982 is ceiling

section with 25 mm dry weight at 230 mm centres.Screw fixing is done mechanically either with

screw driver of drilling machine and finish so as to have a flush look which includes filling with crack

seal / tape and finishing the tapered / square edges of the board with jointing compound paper tape

with finish level. Rates are inclusive with cut-out for ceiling fixtures& Measurement Shall be Consider

L X B & Design Offset Patta shall be Paid Extra.

Providing and fixing Suspended Gypsum panels from Gyptech or equivalent of size 595 mm x 595 mm

At required height and elevation in line, level, curvatures, shape, design, pattern and as per the

specifications of suppliers including providing and fixing heavy duty GI PVC coated frame work

inclusive of suspenders etc. For fixing of ceilling board as per the manufacturer's detailed

specifications, instructions and directions. The rate includes the cost of providing, preparing and

fixing False Beams of Ceilling Boards of required size and at the required intervals including making

necessary cut outs and openings of required shape, size and dimensions in the false ceilling and It's

frame work for Electrical Fittings and A.C. Diffusers if required including.Providing all the required

tools, tackels, labours, scaffolding, staging and all the required materials complete job. as reqd. As

directed by the Engineer Incharge.inclusive of all material and labour and with transportation.

Providing and fixing panelling on wall & ceilings with WPC (Wood Polymer Composite) Fluted Panels

of VENTURA/LEBEN/Alutuff / Murrato or other approved make of approved shade in approved pattern

90 as directed by the EIC. Rates shall be inclusive of all hardware fittings sna fixtures as required to fix SMT

the same on the wall and ceilings including corner beading and fastners, etc. complete as per

detailed drawing or as directed by EIC.

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge

& 15 mm Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium

silicate ceiling tiles shall have , light reflection 85% non-combustible as per B.S. 476 part IV, 100%

humidity resistance and also having thermal conductivity0.043° w/m KC.for the best thermal

Insulation . The Light weight calcium Silicate tile shall be of approved texture Fine

fissured/Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or

equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter locking metal grid

of hot dipped galvanized steel sections (galvanizing @120 grams per sqm including both side)

consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm

made from 0.30 mm thick (minimum) sheet, 1200mm c/c, and cross ‘T’ of size 24X28mm made out of

0.33mm (Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm c/c to form

agrid of 1200X600mm and secondary cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm

thick (Minimum) sheet to be interlocked at middle of the 1200X600mm panel to form grid of size

91 600X600mm resting on periphery walls/partitions on a perimeter wall angle pre-coated steel of size SMT

(24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre

to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick Densified edges

light weight calcium silicate ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone) in the

grid including, cutting /making opening for services like diffusers, grills, light fittings, fixtures, smoke

detectors etc., wherever required, Main ‘T’ runners to be suspended from ceiling using G.I. slotted

cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm

G.I. adjustable rods with galvanized steel level clips of size 85X30X0.8mm, spaced at 1200mm centre

to centre long main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-painted with

polyester baked paint, for all heights, as per specifications, drawings and as directed by E.I.C.

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls

92 for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1- SMT

Providing 20mm thick cement plaster in single coat on single or half brick walls for interior plastering

93 upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1cement:3-sand) SMT

Extra over above items finishing with a floating coat of neat cement slurry.

Extra over above items for plastering on ceilings and sofits of stairs upto floor two level instead of

95 plastering on walls. SMT

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting

of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1

(1-cement : 1-sand)vata

Providing cement etc.(10cm.

x 10 cm. size) quarter round in cement mortar 1:1 including neat

cement finishing, watering etc. complete.

Removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface

smooth including necessary repairs to scratches complete.

Removing dry or oil bound distemper by a washing and scraping and sand papering on the ceilings and

sloping roofs surface smooth including necessary repairs to scratches complete.

Distempeing (Two coats) with oil bound distemper/oil bound washable distempe of approved brand

and manufacture and of required shade on wall surfaces to give an even shade, over and including a

100 priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the SMT

surface free from mortar dropping and other foreign matter and also including preparing the surface

even and sand papered smooth.

101 Do as above for distempering with oil bound washable distemper on celling and sloping roofs. SMT

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on

102 undecorated wall surface to give an even shade including throughly brushing the surface free from SMT

mortar droppings and other foreign matter and sand papered smooth.

103 Do as above for painting with plastic emulsion paint of approved brand on ceilings and sloping roofs. SMT

104 Extra over Item No.102 and 103 coat of wall painting with plastic emulsion paint of approved brand. SMT

Finishing wall with Weather proof exterior primer befor applaying paint on wall surface (two coats) to

105 give an required shape even shade after thoroughly brushing the surface to remove all dirt, and SMT

remains of loose powdered materials. etc complete.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an

106 required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of SMT

loose powdered materials.etc complete

Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall

107 surface to give an even shade including thoroughly brushing the surface free from mortar dropping SMT

and other foreign matter and sand papered smooth.

Applying priming coat over new steel and other metel surface after and including preparing the

108 surface by throughly cleaning, oil,grease, dirt and other foreign matter and scoured with brushes fine SMT

steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint,

109 brushing, interior to give an even shade including cleaning the surface an even shade including SMT

cleanicn the surface of all dirt, dust and other foreign matter.

Painting one coats (excluding priming coat) on previously painted steel and other metal surface with

110 enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other SMT

foreign matter.

111 Extra over Item No. 109 and 110 for every subsequent coat of paint. SMT

Appliying priming coat over new wood and wood based surface after and including preparing the

112 surface by throughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. SMT

(C) Ready mixed paint brushing priming for enamel

Extra over above item for every subsequent coat of priming coat. (C) Ready mixed paint brushing

priming for enamel

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint,

114 interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter SMT

sand papering and stopping.

Painting one coats (excluding priming coat) on previously painted wood and wood based surface with

enamel paint, to give an even shade including cleaning the of all dirt, dust and other foreign matter.

116 Extra over Item No.114 and 115 for every subsequent coat of paint. SMT

Varnishing two coats (excluding priming coat) on new wood and wood based surface under coating

117 with flatting varnish and finished coat with varnish to give an even surface including cleaning the SMT

surface of all dirt, dust and sand papering so as to produce a smooth dry surface.

Polishing with french polish on new wood and wood based surface to give an even surface including

cleaning, the surface of all dirt, dust and sand papering smooth and including a coat of wood filler.

Polishing with french polish on previously polished wood and wood based surface to give an even

119 surface including cleaning, the surface of all dirt, dust and sand papered smooth and including a coat SMT

of wood filler.

Providing China Mosaic water proofing treatment in Terrace of different levels preparing roof surface

for laying brick bat on cement mortar (1:4) with special water proofing composed in necessary

gradient for easy flow of rain water, brick bat coba is finally covered by China Mosaic Tikdi fixed by

white cement base added with special water proofing compound. The treatment is carried along the

vertical surface of the parapet and other joining wall up to height of about 300 mm in a shape of

quarter round vata. The average thickness of the water proofing treatment is about 140 mm.

120 Minimum thickness at rain water outlet points being 75 mm including curing etc. complete as per SMT

specification and instruction including water proofing test for minimum 3 days etc., complete as

directed by E. I. C. Contractor should give guarantee for water proofing for 5 years. All the material

including cement should be brought by the contractor at his own cost. 10% Amount will be kept with

company during guarantee period.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying

cement slurry mixed with water proofing cement compound consisting of applying: (a) First layer of

slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This

layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm

121 mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure SMT

for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface,

treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed

Providing and laying black finished non woven polyster 3 mm thick APP(Atactic Polypropylene

Polymer) sheets manufactured by Bitumate Co.Ltd or Pidilite or equ.make For water proofing on

122 various roof including applying a coat of primer after preparing Surface for laying APP Memberan SMT

welding etc.comp.including removing / scraping / cleaning of existing surface. As required and as

directed by the Engineer incharge.

Providing silver waterproofing oil painting on APP sheet.

Filling sunk slab with light material like charu/boxite as directed including cement mortar Plaster

mm thick in CM. 1:3 in all Around Surface (sides of Beams and top of sunk slab) including adding

water proofing material like SUNANDA, FOSROK or PIDILITE to be used as a 0.15 Litre to 1 cement bag

124 and making the surface clean and attractive as design at any height etc complete as directed by CMT

Engineer in-Charge.with all lead and lift upto height 30 mtr.

Providing water proofing Treatment by POLYMERIC CHEMICAL TREATMENT including removing all

loose materials of old treatment if required. Preparing surface by sealing of cracks by chemical

grouting and coating of necessary chemical water proofing compound on prepared surface for

125 complete protection using POLYMERIC EPOXY CHEMICAL like ZYCOSIL as approved by E.I.C. as per SMT

manufacturer’s specifications and giving guarantee for water proofing for three years (The rates are

inclusive of all materials and labours) 10% amount of work executed will be withheld and realse after

Gurantee period is complited sucessfully.

Water Supply Plumbing & Sanitary Fitting

126 Providing and fixing 15mm L&K make angle cock as directed by EIC. No

127 Providing and fixing 15mm L&Kn make short body Bib cock as directed by EIC. No

Providing and fixing screw down L&K make phantom collection PH-0047 long body Bib cock with

128 flange of following size.(B) Brass chromium plated screws down Bib Tap. (i) 15mm dia. Basic price No

P&F Stainless Steel 304 grade Soap Dish with all tools and tekels etc completed.

P&F Stainless Steel 304 grade Towel Holder with all tools and tekels etc completed.

131 Providing and fixing L&K make Pillar cock as directed by EIC. No

132 Providing and fixing L&K make Conceal stop cock including two nos of brass MFT as directed by EIC. No

133 Providing and fixing L&K make flush cock medium including two nos of brass MFT as directed by EIC. No

134 Providing and fixing L&K make two way bib cock as directed by EIC No

135 Providing and fixing Pilot brand make brass hand faucet directed by EIC. No

Providing and fixing Jet spray heavy duty with S.S. Braided hose 60 cm long.

Providing and fixing 2 feet supply pipe

Providing & fixing seat cover of approved quality and brand with necessary fittings as directed by EIC.

Providing & Fixing UPVC 25 mm BRASS Elbow MT/ FT OR BRASS MT/ FT of approved quality and brand

139 as directed by EIC No

Providing & Fixing UPVC 15mm BRASS Elbow MT/ FT OR BRASS MT/ FT of approved quality and brand

140 as directed by EIC No

Removing & re-fixing of UPVC pipe laid from wall to ceiling including all necessary clamps as directed

Providing and fixing to wall ceiling and floor 10.0Kg. F/Cm2 working pressure polythene pipes of the

142 following outside Dia. Low densidy, complete with special falnge compression type fittings, wall RMT

clipsetc. including making good the wall ceiling and floor.(F) 75mm

Providing and fixing to wall ceiling and floor 10.0Kg. F/Cm2 working pressure poluthene pipes of the

143 following outside Dia. Low densidy, complete with special falnge compression type fittings, wall RMT

clipsetc. including making good the wall ceiling and floor.(G)110 mm

144 Providing and fixing in position cowel went to pipes.(B) 75mm dia. Each

145 Providing and fixing in position cowel went to pipes.(C) 100mm dia Each

Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets,

complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with

polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and

146 overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making Each

good the same connecting the flush bend with cistern and closet (overflow pipe to be measured and

paid for separately)(A) Vitreous China (I) In white colour

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting holes in

147 walls and making good the same but excluding fittings. (C) Vitreous China Sink.(i) 600mm x450mm x Each

148 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. Each

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick

149 A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers. Each

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with

C.P. brass scews.(B) 600mm x 20mm size.

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib

Tap. (i) 15mm dia.

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib

Tap. (ii) 20mm dia.

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back

nuts. (i) 15mm dia.

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back

nuts. (ii) 20mm dia.

EWC: Providing and fixing Wall Hung water closet (European type W.C. pan) as per approved make

of selection & shade with PP soft close seat cover, P OR S Trap M.S. or G.I bracket , CP brass hinges

and rubber buffers and Jointing the trap with soil pipe in cement mortar : 1:1 (1 cement : 1 fine

155 sand) including cutting and making good the walls and floors where required with all labour and Each

materials. All works to be carried out as per instructions and direction of Engineer-in-charge. (Model

Jeguar CNS-WHT-959SPP or Cera cordo - S1043108)

Providing and fixing Urinal of approved quality including connection with trap and with integral

156 longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 300mm. Each

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface

after housing G.I./UPVC/CPVC pipe etc.

Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) Pipes, having thermal stability for cold

water supply and including all UPVC plain & brass threaded fittings, including fixing the pipe on the

wall with the help of clamp at every one metre C/C or shall be concealed as directed. This includes

158 jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per RMT

direction of Engineer in Charge. (make Ajay/Ashirvad/Supreme/Astral/Finolex/Prince) - 15 mm

159 Do as above for 20 mm nominal dia Pipes RMT

160 Do as above for 25 mm nominal dia Pipes RMT

161 Do as above for 32 mm nominal dia Pipes RMT

162 Do as above for 40 mm nominal dia Pipes RMT

163 Do as above for 50 mm nominal dia Pipes RMT

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x

164 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as RMT

directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all materials.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x

165 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as RMT

directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of all materials.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the

166 following nominal diameter of self cleansing design with C.I scread down or hinged grating including Each

the cost of cutting and making good the walls.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter with jali of the

167 following nominal diameter of self cleansing design with C.I scread down or hinged grating including Each

the cost of cutting and making good the walls.

Providing & fixing best 'Cera' or equivelent make white porcelain rectangular wash hand basin size

500 X 400 mm. with C. I. M. S. Brackets fixed in wall including approved quality of brass C. P. Pillar

168 cock L&K make , one brass C. P. 15 mm. dia. concealed stop cock L&K make, with P. V. C. supply No

pipe connection for stop cock to pillar cock 25 mm. dia. Waste pipe up to 1.0 M. length etc.,

complete as directed by E. I. C.

Providing and fixing white/Ivory Indian type with foot rest WC comode Cera/Hindustan/Hindware or

equivelent make including P trap bends and having connection for flush cock with L&K Flush Cock,

169 etc., complete as directed incuding necessary PVC pipe connection upto outside of wall with bend No

etc., for all floors complete in working condition giving water tight test etc., complete as directed by

Providing and fixing standard quality CERA or equivalent Europian WC Commode EWC including P trap

bends and having plastic seat cover fixed with commode and connection for flush cock with Flush

Cock, with Jet spary and concealed stop cock etc., complete as directed incuding necessary PVC pipe

170 connection upto outside of wall with bend etc., for all floors complete in working condition giving No

water tight test etc., complete as directed by EIC.

Providing & Fixing white porcelain lip shaped CERA Carys model or Equivalent wall type URINAL PAN

of 325x310x420 mm. of approved quality & make including waste coupling bends & necessary outlet

171 of 25 mm. dia. G. I./upvc Pipe connections including providing brass stop cock, PVC connection etc. No

Engaging of Plumber with helper for Misc.plumbing work for cleaning of existing water supply pipe

172 line network from terrace water tank to GF gents and ladies toilets. Job

Providing & Fixing ready made 2000/5000 LITRE capacity P. V. C. water tight storage tanks made

from linear low density polyethylene & low density polyethylene LDPF product confirming to I. S. :

10146 - 1982 with cover including providing & fixing one float valve ball-cock, one of G. I. Waste pipe

173 with plug one of G. I. Over flow pipe of length up to 0.30 mt. including making all connection for Liter

inlet /outlet supply with necessary fittings for outlet / inlet etc., complete as directed by EIC.

Providing and fixing Mirror ploished Black Granite for Enterance steps, etc including average 20 to

mm thick base coarse for laying ,applying gray cement slurry for fixing and for partition making zari

174 in wall and fill up by cement mortar 1:2 [1 cement : 2 coarse sand] for all type work with all tools SMT

and tackles as per EIC.

Providing services of mason / fabrictor/ carpentaer / plumber for various types works for 08 hrs at

directed by EIC.

Providing services of Helper for mason/fabrictor / carpenter / plumber for maintenance and cleaning

for various types of works for 08 hrs at directed by EIC.

Providing & Fixing Automatic Air Freshner Machine. Eliminates airborne bacteria & odors 24 x 7. User-

Friendly Remote control Facility. Operated by infrared ray coding technology. Easy to operate by

remote control. Advanced sleek design to meet all kinds of commercial or public use.INCLUDES:

177 Machine, Alkaline Battery, and refill Capacity: 250 & 300 ML Aerosol Can Time-Set: (5-30 mins) Each

Colour: White & Grey Time-set spraying. (5-30 Minutes).Environmental "pp" Material is recyclable.Two

"D" Batteries last over 5 months.Locking System.It can fit 250 & 300ml Aerosol can.

Providing and Fixing Doormat made up of Coir Doormat (Plain Welcome, Natural, 35cm X 60cm,

Rectangular) as directed by EIC.

Drainage & Sewerage Item

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I.

179 cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps. (A) Each

100mm x 100mm size P type.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I.

cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps.(B)

150mm x 100mm size P or R type

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S.

181 class NP2 of the following internal diameter with collars and butt ends prepared for collar joints RMT

including testing of joints complete.(C) 250mm

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S.

182 class NP2 of the following internal diameter with collars and butt ends prepared for collar joints RMT

including testing of joints complete.(D) 300mm

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S.

183 class NP2 of the following internal diameter with collars and butt ends prepared for collar joints RMT

including testing of joints complete.(E) 450mm

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks

having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty)

455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt.

of cover 23 Kg.) and Wt. of frame 15Kg.) (R.C.C. top slabe with 1:2:4 mix (1-cement :2-coarse sand :4-

184 graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with Each

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete

etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks

having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty)

455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt.

of cover 23 Kg.) and Wt. of frame 15Kg.) (R.C.C. top slabe with 1:2:4 mix (1-cement :2-coarse sand :4-

185 graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with Each

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete

etc. complete.(ii) Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or two

Extra over items 24.44 for every additional depth of 0.1M. Of part thereof beyond 450mm depth for

Brick masonry chamber.(ii) for 500mm x 700mm size.

Repairing of the chambers by about one layers with toothing , bk masonary, plaster, & removing

187 dismentalled stuff, etc & making the entire chamber in working conditions etc completed curing, Job

finishing with plaster etc .

Providing & Fixing Standard quality 600x600 mm / 450x600 mm size RCC Precast manhole cover with

188 frame including 1:3 cement mortar vata to fix the frame for drainage chambers. MR ( Size should be No

made as per site condition with existing opening of manhole chamber).

Making connection of existing drainage system to new septic tank and sockpit as a job by engaging

189 plumber including making necessary cement mortar vata arround the hole of pipe with all tools and Job

tackeles and material etc complete.

Hiring of sewer cleaning tanker for collecting sewerage from sock well as well as from men hole

190 chamber. Job

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with

bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With

191 common burnt clay F.P.S. (non modular) bricks of class designation 7.5. Each

MISCELLANEOUS BUILDING ITEM

Providing borewell pre-feasibility report (before conducting borewell work) feasibility report shall

192 include geology of the area, Hydrological condition of the area, Water quality of the area, location of Job

borewell, depth of borewell and recommendation if any.

Drilling of bore well 200mm dia by machine in soft rock, hard rock and hard murrum etc. complete

truly vertical with all equipment's and labours etc complete as directed by E.I.C. Note:- Rate is

including Water Supply & Excavation of Pit, refilling the excavated pit, supply and filling pebbles

around pipe etc. complete as per requirement. For 0.00 to 150 Meter

Providing & fixing 160mm Dia 6 kg/M2 FINOLAX/Dutron/Sintex brand or equivalent rigid PVC pipe

194 including necessary connector, solution and lowering the pipe, joining the pipe with approved RMT

technique etc. complete as directed by EIC.

195 Do As Above but Stainer PVC Pipe RMT

Providing of 10 gauge MS Plate with set of Cap, clamp and reducer to col pipe to main pipe, similer at

Providing and lowering 40 mm dia ISI Mark HDPE approved make as a TOTO pipe with necessary fitting

197 like jointing,related bore cape etc. complete as directed by eic. RMT

Supplying and lowering of Submersible Pump of AMRUT/KSB/LUBI OR EQUIVALENT having capacity of

16 stage 2 HP three phase including completed as directed.

Developing, Clearing & giving yield test for the bore well by requied size of compressor & pump

running for 12 hours or till no sand comes off with the pumped water with necessary pipes lowering &

199 removing pipes in well etc., with all equipments requied to carry out the test etc. completed as JOB

directed by E.I.C.

Supplying and lowering of Submersible Pump of AMRUT/KSB/LUBI OR EQUIVALENT having capacity of

14 stage 2 HP three phase including completed as directed.

Providng and joining approved quality fist copper cables 2.5mm flat sufficient pump set etc complte

as directed by EIC.

Providing and fixing approved quality controlled panel board metal meter box ISI with a main fuse

connection ampere meter, voltmeter 30Amp 1 phase switch single phase preventer cum water level

guard and male and female type socket 1 phase indicator lamps and toggle switch etc. including

wiring/earthing complete as directed by EIC.

Developing, Clearing & giving yield test for the bore well by requied size of compressor & pump

running for 12 hours or till no sand comes off with the pumped water with necessary pipes lowering &

203 removing pipes in well etc., with all equipments requied to carry out the test etc. completed as JOB

directed by E.I.C.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including

cutting the patch in proper shape, raking out joints and preparing and lastering the surface of the

walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of

Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and applying of anticorrosive treatment to exposed thoroughly cleaned structural

reinforcement and steel section by two coat of alkaline rust converting primer FERMET or equivelent

confirming to ASTM-117 at an interval of 05 hours between two coats. Apply bipolar migratory

corrosion inhabitor EPCO-KP 100 or equivelant @ 04M/Ltr over entire surface to be repaired to

prevent corrosion in embedded concrete. Apply two coats of interpenetrating polymer network

system IPNET RB or equivelent over reinforcement to protect and make up the lost steel sections

manufacture under CBRI technology. The application shall be done by brush or spray after cleaning

existing reinforcement with wire / rotary to make the surface free from loose materials, dirt

etc.inclusive of all labour material equipment etc.comp. as per specification and nstruction of

eic.App rate chandod sdn work.

Patching of damaged concrete surface including building up of surface profile structural elements by

using Dr.Fixit Pidicrete URP chemical on cleaned corroded steel in the ratio of URP 15 kg: Cement

Kg by weight or recommended by manufacture for first two coat of bonding primer in damaged areas

and 2nd coat for application of cement mortar plaster up to required thickness (01 cement :

washed sand)with ratio of URP 7.5 kg:50 kg cement including of all labour,material,equipment etc.

comp. as per specification and instruction of consultant.

Patching of damaged concrete surface including building up surface profile structurer elements by

using polymer concrete /mortar/apoxy-latex modified air cured concrete/morta systeme confirming

to ASTM-C1059-86 type ll (01 cement:03wellgraded cleaned pre packed river sand with 10% apoxy

latex by weight of cement & water cement ratio as per 0.30)or recommended by manufactured of

average of 25 mm thickness in damage areas including applying structural grade apoxy /latex bond

207 coat confirming to ASTM -C 88291 prior to application of polymer modified mortar/spray to ensure SMT

bond betwwen old concrete & new system by brush application, levelling, profliling etc. inclusive of

all laboureras, material, equipment etc. comp as per specifications & instruction of E.I.C.. the

treated area shall be paited with exterior imulsions paint of approved quality & make.

Filling Crack with non expanding Poleurothene PU Based Elastometric filler Material including Cut the

208 cracks by grinder Atleast 12 to 15 mm Making V notch, Removing all loose Materials by depression. RMT

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle posts 40mm x 40 mm x6

mm and oil painting 3 coats fixed at 2.5 Mt,C/c. with five Horizontan lines and two diagonals of

209 galvanised steel barbed wire weighting 9.38 Kg. per 100 Metre, strained and fixed to posts with RMT

G.I,staples including fixing the postsin ground with 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10 etc

Applying general insecticide pest control treatment to floors, cupboards etc including labour

materials etc. complete. Using Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075% concentration by

210 mass) is recommended 10.5ml chemical diluted with 5 liters of water application 0.5 litre chemical SMT

/Sqm of surface is recommended as per I.S.

Carring out plinth treatment to post construction / existing structure by spraying chemical solution

for termite control treatment including labour and material consistment with I.S.I specification. Using

Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent is

211 recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % concrentration inclusive of SMT

one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface is

recommended as per I.S

Carrying out wall treatment for termite control including spraying with chemical solution in oil base

including labour and material Using Chlorpyriphos 20 ECAs per IS 6313 part -II (1% concentration by

212 mass) is recommended i.e one litre chemical emulsion diluted with 19 liter oil base. Total solution SMT

will be 20 liters inclusive of one liter chemical emulsion application at the rate of 7.5 litre chemical /

Sqm of surface is recommended as per I.S.

Providing & Fixing 12/14 G I Barbed wire with over compound wall including all materials and tools

213 and tackles etc completed. The measurement shall be taken per individual row. RMT

Providing and fixing Chain link roll having 10 gauge wire & 50x50mm jali with appropriate height as

214 directed and fixing the same to MS angle and providing and fixing MS flat bedding by means of MS nut SMT

& bolts etc. complete as directed by EIC.

Providing and fixing 600mm effective dia(after0 lying)HOT DEEP GALVANIZED RAZOR TAPE

CONCERTINA COIL with all required clips, pins etc as per specification. Concertina coil shall be fixed

to M.S.Angles with RBT(Razor barbed tape) with the help of u-nails/split pin. Rate shall be quoted on

running meter s of compound wall basis.(1) Effective dia of coil after stretching shall be 600 mm. (2)

Number of circles and no of clips shall be 72 +/- 3 and 180 respectively in each 9 meter of laid length.

Minimum 3 clips per loop should be fixed WITH PUNMATIC TOOLS. (3) Central core wire shall be made

of 2.5 mmdia. High carbon spring steel made up of high tensile strengtrth as per I.S.4454 Part-1,grade-

ii,having minimum galvanizing coating thickness equivalent of 120 GMS PER SQM. (4) Razor strip shall

be of 0.5 mm thick and 19 mm width confirming to IS 513.DD quality having minimum galvanizing

coating of 12 microns, Series of barbed punch shall be punched along the length at regular

intervals.(approximately 160 barbs per running meter of concertina coil)(5) Clips shall be made up of

stainless steel(ss 304)(6) The razor strip shall be mounted on the central core wire by mechanical

crimping.(7) The work is to be carried out over the boundary wall. at all heights including necessary

scaffolding etc.comp.

Providing and Fixing SS Drawer lock of godrej or equivelant make incl.All labour & materials as

approved and directed by EIC

Providing and Fixing Mortize lock of godrej or equivelant make incl.All labour & materials as approved

and directed by EIC

Providing and Fixing Multi Drawer lock of godrej or equivelant make incl.All labour & materials as

approved and directed by EIC

Providing and Fixing Cylindrical lock of godrej or equivelant make incl.All labour & materials as

approved and directed by EIC

Providing and Fixing Steel Cupboard lock of godrej or equivelant make incl.All labour & materials as

approved and directed by EIC

Providing and Fixing Acrylic PVC Name plate of Size 12"x4" or as per requirment with

221 printed/emboded letters in required colour including all material and labour as directed by EIC. Sq. inch

Providing and Fixing Brass name plate with embossed letters and liquid polishing in required colour

including all material and labour as directed by EIC.

223 Providing new 18"x18"x4" foam gadi along with cover All labour & materials as directed by EIC Each

Proving new 21" x 22" x 4" foam gadi for sofa seat & back including all material & transportation

charges as directed by EIC.

Reparing of revolving chair with SS Base Stand of approved brand and make incl. All labour &

mateirals as approved and directed by EIC.

Reparing of revolving chair with Hydraulic Jumper of approved brand and make incl. All labour &

mateirals as approved and directed by EIC.

Reparing of revolving chair by providing Cloth with maderpatt of approved brand and make incl. All

labour & mateirals as approved and directed by EIC.

Reparing of revolving chair with Wheel of approved brand and make incl. All labour & mateirals as

approved and directed by EIC.

Reparing of revolving chair with Handle of approved brand and make incl. All labour & mateirals as

approved and directed by EIC.

Washing of Revolving Chair with all required chemicals, vecume m/c, tools & tackles incl. All labour

& materials as directed by EIC. For Below

Washing of Single Seater Sofa with all required chemicals, vecume m/c, tools & tackles incl. All

labour & materials as directed by EIC. For Below

Washing of Two Seater Sofa with all required chemicals, vecume m/c, tools & tackles incl. All labour

& materials as directed by EIC. For Below

Washing of Three Seater Sofa with all required chemicals, vecume m/c, tools & tackles incl. All

labour & materials as directed by EIC. For Below

Washing of Curtains ( Vertical/Roman/Rollar blinds, etc.) with all required chemicals, vecume m/c,

tools & tackles incl. All labour & materials as directed by EIC. For Below

Reparing of office table with approved brand and make incl. All labour & mateirals as approved and

235 directed by EIC. - Drawer handle Each

Reparing of office table with approved brand and make incl. All labour & mateirals as approved and

directed by EIC. - 5 mm table glass

Reparing of office table with approved brand and make incl. All labour & mateirals as approved and

directed by EIC. - Powder coated telescopic sliding channel ( any size)

Reparing of office table with approved brand and make incl. All labour & mateirals as approved and

238 directed by EIC. - 600mm wide and 450 mm deep wooden keyboard tray made from 19mm thick all Each

plywood and 1 mm thick selected Laminate

Providing & laying new table cloth for table including edge stiching of all sides.

Providing approved quality of cloth in approved design shed and color with aster, backing as per

240 selection by occupant including all as directed by EIC basic rate of cloth shell be RS. 400/ PER Rmt for RMT

Labor charges for stitching charges per part in elate pattern including backside madarpat for 54'' wide

part if required with all tools and tackles to complete the work cloth required shell be utilize from

241 above and rest material required to function shall be brought by contactor at hisown cost. Payment PART

of part shall be considered irrespective of length of part i.e. for door/window.

Providing and fixing ss pipe of 25 mm dia as per selection of Occupant as directed by E IC.

Providing and fixing ss knob / side socket to suit the pipe of 25 mm dia as per selection of occupant

as directed by EIC. The rate is per pair in central support is required than same will be paid Rs.

243 per no and only end cap is required as per site condition than same will be paid rs 150 per pair. PAIR

Proving new wooden base for sofa foam gadi seat & back including all material & transportation

244 charges as directed by EIC SFT

Labour charges for repairing of existing sofas by fixing new wooden base with foam gadi seat & back

245 including adhesives, stapler pins etc. including all labours & tools & tackles as directed by EIC. SFT

Providing & fixing Aluminum floor spring heavy of approved quality and brand with new pivot and

246 threads after removing & refixing of aluminum doors as directed by EIC. No

Providing and fixing partly laminated parition with 5 mm thick float glass as per detalis and layout.

Wooden partition made with 8 mm thick playwood and 1 mm thick laminate on both sides. Necessary

teak wood internal supports sizes shall be as per drawings (approx. @ 600 x 600 intervals). Electrical

247 Race way at floated glass level. All completed with 3-coates of melamine polish on exposed edge SMT

patty and with fitting on site. Laminates, plywood, glass & shades shall be approved by EIC

Providing and fixing wooden flush partition of any height made with 8 mm thick playwood, 1 mm

thick laminate on both sides. Necessary teak wood internal supports sizes shall be as per drawings

248 (approx. @ 600 x 600 intervals). Electrical Race way at sill lavel. All completed with 3-coates of SMT

melamine polish on exposed edge patty and with fitting on site. Laminates, plywood & shades shall

be approved by EIC

Providing and fixing one side laminated one side soft board/two side soft board parition. Soft board

shall be of 10 mm to 12 mm thick with 4 mm thick plywood backing with tapestry of basic rate of Rs.

249 150/- per Rmeter. Laminates, plywood, soft board & shades shall be approved by EIC. tHGE ITEM IS SMT

FOR LOW HEIGHT PARTITIION.

Providing and fixing double sided wooden flush partition of any height made with 19 mm thick

plywood, 1 mm thick laminate on both sides including necessary teak wood internal supports sizes .

250 Electrical Race way at sill level. All completed with fitting on site. Laminates, plywood & shades shall SMT

be approved by EIC/Architect.

Providing and fixing FRP tray for leakage area between slab and false ceiling to collect the leakage

251 water with necessary aluminium framing in proper slope. Including provision of PVC pipe as RMT

outlet pipe as per site condition and instruction by engineer-in-charge.

Repairing of the existing aluminium windows including new rubber gasket, rollers, lock and glass if

252 required including removing and refaxing with all tools and tackles, screws etc. complete the work as SMT

directed by EIC.

Providing acustic cement sheet grid ceiling of 4 mm thick 600 mm x 600 mm cement sheet with

253 mm thick GI powder coated Frame with GI supports fixed to the ceiling as approved and directed by SMT

Providing and fixing fibre cement sheet 8 mm or higher thickness with necessary bolting, riveting to

fix on masonary walls as directed by EIC.

Providing and fixing 35 mm thick Decorative type Water proof flush door shutters, solid core

construction with wood frame with Polish of first class hard-wood with cross band and face ply-wood

255 face panels, 1.0 mm thick laminate on both sides including Stainless steel fixtures and fastening like SMT

tower bolt, stopper including for door shutters sides etc complete. as directed by engineer in

charge.(Measurement Shall be Consider L X H)

Providing and fixing new frame for wooden door made of teakwood of 3' wide and 7' height including

finishing with polish as directed by EIC

Providing and Fixing Glass Partition with 12 mm Thick Toughened Glass Fixed with Chrome Finish SS

pipe, Hinges and Fixtures along with Floor Clamp and Wall Clamp. Glass must to be fixed with Glass

257 to Glass Lock with Necessary holes and Fitting along with its Top Railing Pipe of SS of 15 mm Dia Pipe SMT

as per Directed by EIC. Rates are inclusice of all Labour, Material, Transportation and Other Costs for

Erection as per Directed by EIC or Architect.

Providing and fixing 12 mm thick Toughened clear glass door with pre-fitted necessary hardwares of

Enox / Ozone / Godrej or equivalent make for smooth swinging action includeing top and bottom

patch pivot as per drawing or as directed by EIC . Rate shall include necessary approved locking

258 systems, S.S. brush finish (Heavy duty or equivalent), gaskets, Door handel, Floor Spring, Door Closer SMT

& miscellaneous hardware items as approved by EIC. Including all materials and labour etc. complete

as per detail drawing or as per instruction of EIC.

Providing and fixing decorative Frosted glass film with pattern as per design, Translucent, cast PVC,

self-adhesive vinyl as per sample selected with warranty of 3 Years must be provided by contractor.

work complete including all type of tools, tackles, scaffolding etc complete as per suggestion of EIC.

259 If the work will not be completed with satisfaction of EIC, the contractor shall remove all film SMT

without any extracost.Including surface preparation etc.complete.Including cost of all type of tools,

tackles, all labour, scaffolding etc. 20% of cost of item executed will be kept with company during

warranty period.

Providing & Fixing of STL45 ie.Single glazed modular system consist of Aluminium section of 25 x 45 x

2.5 mm thick. All sections duly Powder coated/anodised with 6063-T6 grade and required accessories

ie glass to glass aluminium I sections, T section & 90 degree sections & Glass packing to adjust the

floor level. Ceiling profile, Floor profile and wall profile are 25 mm visible face and 45 mm wide with

12 mm toughen glass as per approved make & insertion of Thermoplastic gasket to adhere the glass

firm & airtight.The sound reduction Value is from 32 to 35 Db.With 6 mm Groove inbuilt in system to

accomodate the carpet & the uneven surfaces.Work including horizontal thin profile member at lintel

lvl. as per drawing. Accessories/Hardware: neutral cure glazed & metal silicon sealant of approved

make on the periphery of the glass & wood etc. Work complete including all type of material,

fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, safety measures,

sample mockup, all floor, all levels, all heights etc complete as per detailed drawings, specifications

or as per instruction of EIC.

Providing , Making and Fixing of Glass door with fix glass partition. Frame work of the partition shall

be made from 18mm thick MR Grade plywood with 1mm thick laminate out side and inside black

japan. Internal support distance and size shall be as per drawing. 12mm thick toughened glass shall

be fixed in frame with 1" X 0.5" bidding Patti. 12mm thick clear toughened glass door shall be pivoted

both side with floor spring (Paid Extra) . Fitting of the door shall be in plumb and required hardware

like glass handles, top pivot etc. complete. 12 mm thick clear toughened glass shall be fix besides

glass door with glass fitting hardware. all glass shall be free from scratches and dent Quality of the

261 glass shall be standard. All the wooden members shall be polished with melamine polish. Before SMT

applying final coat of the polish all the surfaces of the wood shall be rubbed with 320 number of

sand paper for finish work. All the exposed edges of the plywood shall be covered with solid wood

Ghana bidding Patti. .All the rates are inclusive of required like hardware, adhesive,Nails,SR, ,screws,

as per approved by architect or engineer in-charge etc. complete.(Measurement Shall be Consider L X

Providing & fixing Hydraulic door closer Godrej or equivelant make including removing old damaged

262 one with all necessary tools, tackles and labours as directed by EIC. Each

Providing Table (Laminate Finish) of diferent size made with 19 mm thk plywood with all necessry

proper solution, finished by laminates to all expose surface & laminate to all Internal Surface, having

single nos of base box with providing drawers with telescopic channels & shutters made up of 19 mm

thk Ply. All joints covered by 25 mm x 25 mm thk bidding patty. All completed with key board trey,

drawers on telescopic channels, locks, stoppers, SS Screws, MS nails, Auto hinges as per shown in

263 detail drawings & as per instructions of engineer in charge. Contractor has to provided all necessary SMT

cut outs for Electrical works & no extra payment shall be made for it. Laminates, playwood, shades

& haredware Items shall be approved by EIC (Measurement Shall be Consider only table top L X B).

Providing and applying P U Polish works of required shade & pattern on existing wooden surface with

removing dust etc. as directed by EIC.

Providing and applying melamyne Polish works of required shade & pattern on existing wooden

surface with removing dust etc. as directed by EIC.

Providing wooden cupboards of required sizes with 19 mm PLY and 8 mm Back PLY with approved

mm coloured sunmica laminated on exposed surfaces except back side of the cupboards and approved

266 1 mm white sunmica laminate in insides with necessary boarder patti, adhesive, tools, tackles, etc. SFT

complete as direceted by EIC. ( For open cupboards without shutters (file rack) Reduced rate of Rs.

1137.05/Sqft will be provided)

Renovation of Existing storage below sill level with 18 mm ply top, based on vertical supports made

by 18 mm Thk. Plywood with all necessary shutters & self (made by 18 mm thk ply) as per given in

detail drawings. All exposed and internal surfaces covered with 1 mm thk approved shade laminates

267 as instructed by Architect/Engineer In charge. Complete with all hardware like MS nails, screws, SMT

magnet, Stoppers, L - hinges, 18 mm multi locks, table chain, 4" mat finish SS handles etc.

Laminates, plywood, shades & hardware Items shall be approved by EIC.

Providing storage cupboard and fixing on brick/RCC wall member at height made of 19 mm plywood

on all sides and inside inteior partition and covering all exposed surface with 1 mm selected laminate

268 and interior with 1 mm plain colour laminate, including all tools, tackels, labour, adhesive, smoothing SFT

out edges, magnet, drawer lock, etc. complete as directed by EIC.

Providing and fixing roller blinds of Vista/Eco or equivalent make includiing all necessary accessories

incl/ all materials, tools, tackels, etc. as approved and directed by EIC. Samples should be

269 approved by the Engineer In charge. ( Reduced rate of Rs. 1100/Sqmt will be provided for Vertical SMT

Providing and fixing sun control film of Garware or equivalent make and approved quality. Removing

270 of existing film shall be in the scope of the contractor. Complete as per Design & sample approved by SMT

Providing and fixing decorative/ texture wall paper of approved quality and make as selcted and

including fixing with all material, tools, tackels, etc. as directed by EIC.

Fixing Door chowkhats in existing opening including embedding chowkhats in floors or walls cutting

masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with

cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size),

272 painting two coats of approved wood preservative to ides of chowkhats and making good the damages Each

to walls and floors as required complete, including disposal of rubbish to the dumping ground, all

complete as per direction of Engineer-in-Charge.

Do as above for Window chowkhats

274 Do as above for Clerestory window chowkhats Each

275 Acrylic name plate having size 1ft x 4 inch for name and designation No

Misc. work/Unforseen work if required to be carried out during execution of the work which are

assential and required at stge of working such as elevation work, floring work, electrical work,

276 Furniture work, landscaping work, plumbing work, false ceiling work, colour work and misc.civil work Rs.

as per instruction of engineer in charge.(payment will be made as per item & quation of work, CPWD

DSR Rates 2023, Vadodara city R&B SOR 2024- 25 Rate).

Total Amount (Excl. GST) in Rs.

Total Amount (Excl. GST) in Rs.

The rates are exclusive of GST Tax. GST Tax shall be reimbursed on submission of all documents, incl. submission of certified copy

of challan as per latest prevailing laws of executed amount.

TDS for Income tax and work Contract Tax shall be deducted as per Govt. latest prevailing law.

Security Deposit shall be released on successful completion of one year from actual date of completion

finalization of final bill whichever is later. For special items like waterproofing, anti-termite treatment, separate amount shall be

deposited as per item.

I/We have read and clearly understood the terms, conditions, Schedule 'B' and Technical specifications.

I/We hereby accept all the conditions and specifications of MGVCL / PWD as well as specification of this tender document, and

I/We am/are willing to carry out the work at_________% (In words_____________________percentage) above/below the

estimated cost. Accordingly the total amount of my/our tender works out to Rs. (In words Rs.

estimated cost. Accordingly the total amount of my/our tender works out to Rs. (In words Rs.

Stamp & Signature of Contractor Baroda City Circle.