Providing and Fixing Fire Safety System As Per Guideline of NBC, GDCR & RMC @ City Circle Office Building Rajkot.

Name of Work : Providing and Fixing Fire Safety System As Per Guideline of NBC, GDCR & RMC

@ City Circle Office Building Rajkot.

ITEM QTY PER RATE AMOUNT

Main Fire Hydrant Pump LUBI/KSB/KIRLOSHKER make SITC of: Back pull

out type -Single Stage, Self Mriming, Centrifugal Pump for Main Fire Pump

with Electric Motor, Meachanical Seal, Base frame and Couplings. MOC:-

Casing-CI, Impeller- Bronze, Shaft- SS 410, Sleeve- SS410. Flow Capacity:

1250 LPM Head: 45 mtr 2900RPM Pump shall be capable of furnishing not less

than 150% of rated capacity at a head not less than 65% of rated head he shut off

head shall exceed 120% of rated head. UOM:-Price Per Complete set of Pump +

Motor + Accessories. 1.00 Nos 87654.00

Supplying, installation, testing and commissioning of electric driven

pressurisation pump suitable for automatic operation and Jockey Fire Pump

LUBI/KSB/KIRLOSHKER make SITC of: Back Pull-out End Suction Type -

ingle Stage, Self Priming, Centrifugal Pump for Jockey Fire Pump with Electric

Motor, Mechanical Seal, Base-frame and Couplings. MOC:-Casing-CI, Impeller-

Bronze, Shaft- SS 410, Sleeve- SS410. Flow Capacity: 180 LPM Head: 50 mtr

Speed: 2900 RPM Pump shall be capable of furnishing not less than 150% of

rated capacity at a head not less than 65% of rated head The shut off head shall

exceed 120% of rated head. UOM:-Price Per Complete set of Pump + Motor +

Accessories. 1.00 Nos 45430.00

Supplying & erecting approved control cubical panel (Star - Delta) made from16

G. CRCA sheet duly painted with epoxy powder painted inside and outside with

hinged doors and locking arrangement, consisting of suitable size of ON- OFF

isolator (AC - 3/23 duty) main fuses, single phasing preventer cum water level.

Guard (Complete unit), Toggle switch to by pass Single phase preventer cum

3 WLG, indicating lamps for R- YB phases, over load relay, Automatic water level

controller, Ammeter & Voltmeter each with two way selector switch incoming

wires duly socket Crimped, Panel to be erected on angle iron frame grouted on

wall as directed. Star Delta & main contactor, overload relay, thermal /

Electronic Star delta cutoff timer, start - stop push buttons. The isolator overload

relay & contactors of L& T, Siemens, Redex or Cuttler Hamer make only. Panel

to be erected on angle iron frame ground on wall.make-Sky/Belife/L&T 1.00 Nos 55430.00

Supplying, installation, testing and commissioning of Diesel Engine Driven

Main Fire Pump make LUBI/KSB/KIRLOSHKER suitable for automatic

operation and consisting of following: (a) Horizontal, centrifugal, back pullout

pump to ensure a minimum pressure of 3.5 kg / sq.cm. at highest and farthest

outlet at specified flow of 1620 lpm at 50m. head conforming to IS standards. (b)

Diesel engine of 1800 RPM water cooled type with radiator conforming to

relevant BS & IS standard complete with auto starting mechanism, 12 volts/24

volts electric starting equipment, Diesel tank, exhaust pipe extended up to 1 m.

outside pump house duly insulated with 50 mm. thick glass wool with 1.0 mm.

thick aluminium sheet cladding, residential silencer, instruments and protection

4 as per specification, stop solenoid for auto stop in the event of fault with audio

indications, painted with post office red colour etc. as required. (C) 1 no. 2 hours

capacity day diesel storage tank fabricated from 3 mm thick M.s plates. Tank

shall be provided with inlet, outlet, overflow, air vent, drain connections, filling

connection and megnatic level indicator. Tank shall be mounted on a suitable

steel structure (painted with 2 coats of red oxide paint). tank shall be provided

with epoxy coat from inside & two or more coats of synthetic enamel paint

outside over two coats of red oxide primer.(D) 24 volts 180 AH lead acid battery

(12 volts- 2 Nos) with boost/trickle charger for starting the engine automatically

complete as required.(E) Common Base plat for Pump and engine and coupling,

coupling guard and other accessories as required for complete installation of

pump set.Price Per Complete set of Pump + Motor + Accessories. 1.00 Nos 350670.00

Piping for Fire Safety Works Providing & Laying 'C' Class Heavy G.I. pipe

laying. Supply, fabrication, installation, hydro testing & painting of above

ground pipe. with necessary pipe itments (Flanges, Bands, Socket etc.) Vertically

every 3 mt. & Horizontaly every 2.5 mt. painted with one coat of primer (Zinc

Oxide) & two coats of finshing paints GI support / Clamps / Hangers/pipe etc.

Hardware (Gaskets, Nut-Bolts, Paint etc.) Consumables (Welding Rod etc.) and

labour charge. Quality : GI, C-Class (Heavy). Make - Apollo/Surya prakash /

Asian Note : The piping installation has to be put to hydraulic test to1.5 times

Working pressure before applying paint or pipe coating and wrapping etc.

Complete.................150 mm diameter 10.00 Rmt 2370.00

Piping for Fire Safety Works Providing & Laying 'C' Class Heavy G.I. pipe

laying. Supply, fabrication, installation, hydro testing & painting of above

ground pipe. with necessary pipe itments (Flanges, Bands, Socket etc.) Vertically

every 3 mt. & Horizontaly every 2.5 mt. painted with one coat of primer (Zinc

Oxide) & two coats of finshing paints GI support / Clamps / Hangers/pipe etc.

Hardware (Gaskets, Nut-Bolts, Paint etc.) Consumables (Welding Rod etc.) and

labour charge. Quality : GI, C-Class (Heavy). Make - Apollo/Surya prakash /

Asian Note : The piping installation has to be put to hydraulic test to1.5 times

Working pressure before applying paint or pipe coating and wrapping etc.

Complete.................100 mm diameter 50.00 Rmt 1960.00

Piping for Fire Safety Works Providing & Laying 'C' Class Heavy G.I. pipe

laying. Supply, fabrication, installation, hydro testing & painting of above

ground pipe. with necessary pipe itments (Flanges, Bands, Socket etc.) Vertically

every 3 mt. & Horizontaly every 2.5 mt. painted with one coat of primer (Zinc

Oxide) & two coats of finshing paints GI support / Clamps / Hangers/pipe etc.

Hardware (Gaskets, Nut-Bolts, Paint etc.) Consumables (Welding Rod etc.) and

labour charge. Quality : GI, C-Class (Heavy). Make - Apollo/Surya prakash /

Asian Note : The piping installation has to be put to hydraulic test to1.5 times

Working pressure before applying paint or pipe coating and wrapping etc.

Complete.................80 mm diameter 24.00 Rmt 1594.00

Piping for Fire Safety Works Providing & Laying 'C' Class Heavy G.I. pipe

laying. Supply, fabrication, installation, hydro testing & painting of above

ground pipe. with necessary pipe itments (Flanges, Bands, Socket etc.) Vertically

every 3 mt. & Horizontaly every 2.5 mt. painted with one coat of primer (Zinc

Oxide) & two coats of finshing paints GI support / Clamps / Hangers/pipe etc.

Hardware (Gaskets, Nut-Bolts, Paint etc.) Consumables (Welding Rod etc.) and

labour charge. Quality : GI, C-Class (Heavy). Make - Apollo/Surya prakash /

Asian Note : The piping installation has to be put to hydraulic test to1.5 times

Working pressure before applying paint or pipe coating and wrapping etc.

Complete.................50 mm diameter 80.00 Rmt 1090.00

Piping for Fire Safety Works Providing & Laying 'C' Class Heavy G.I. pipe

laying. Supply, fabrication, installation, hydro testing & painting of above

ground pipe. with necessary pipe itments (Flanges, Bands, Socket etc.) Vertically

every 3 mt. & Horizontaly every 2.5 mt. painted with one coat of primer (Zinc

Oxide) & two coats of finshing paints GI support / Clamps / Hangers/pipe etc.

Hardware (Gaskets, Nut-Bolts, Paint etc.) Consumables (Welding Rod etc.) and

labour charge. Quality : GI, C-Class (Heavy). Make - Apollo/Surya prakash /

Asian Note : The piping installation has to be put to hydraulic test to1.5 times

Working pressure before applying paint or pipe coating and wrapping etc.

Complete.................25 mm diameter 360.00 Rmt 580.00

Pressure Switch with Siphon Tube and Cock. Supply, Installation and Testing of:

Pressure Gauge with Siphon Tube and Cock. MOC:-100 mm Dial- Glycerin

10 filled- Stainless Steel Body Pressure Gauge with GI Siphon Tube and Brass

Cock. Size:-Dial: 100 mm Range: 0 – 15 Bar (kg/cm2) for 100 mm make-

Danfoss/Orion/Indfos 2.00 Nos 1780.00

Pressure Gauge with Siphon Tube and Cock. Supply, Installation and Testing of:

Pressure Gauge with Siphon Tube and Cock. MOC:-100 mm Dial- Glycerin

11 filled- Stainless Steel Body Pressure Gauge with GI Siphon Tube and Brass

Cock. Size:-Dial: 100 mm Range: 0 – 15 Bar (kg/cm2) for 80 mm make-

Airmaster/H guru/Fiebig 3.00 Nos 1535.00

NON- Return Valve Dual Plant Supply, Installation and Testing of conforming

to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required

12 with necessary pipe fitments, hardware and consumables. MOC:-Body: SS.plate

100 mm dia make-Zolato/Kartar/Osko 4.00 Nos 10800.00

Air Release Valve- 25 mm

Supply, Installation and Testing of: Air Release Valve Check Valve with

13 necessary pipe fitments, hardware, union and consumables and Ball Valve

assembly on top of each riser for Air release system. MOC:-Body: Gunmetal /

SS. Make-ISI 2.00 Nos 1780.00

Fire Hydrant Landing Valve IS 5290 (Stainless Steel (SS-304), ISI Marked):

Supply, Installation and Testing of: Fire Hydrant Landing Valve with necessary

pipe fitments, hardware and consumables. Stainless steel 63 Female single outlet

type – “A“Hydraulic,Test : 21 Kgf/cm2 202 working parts, Water Test : Water

tightness 14kgf/cm2, Flow Test : 900 LPM at 7 kgf/cm2, MOC:-Body: Stainless

Steel (SS-304), Working Parts: Stainless Steel (SS-304), Coupling: Stainless

Steel (SS-304), Standard: -ISI Marked. Size:-63 mm (Flange End: NB 75 mm,

PCD 160 mm) MAKE : Newage/Aaag/Sangam 3.00 Nos 4265.00

Fire Hose reel drum Ahemdabad type IS 884 25 mm x 30 m Supply, Installation

and Testing and commisoning: ISI 884. With Thermoplastic pipe with SS

Shuttoff Nozzle. Standard: - ISI Marked & TAC Approved Hose. Size:-25 mm

dia x 30 m long . MAKE : Newage/Sangam/Fusion 3.00 Nos 3890.00

Fire Hose pipe type A Is 636 and male female coupling intenseous SS 304 with

GI binding legth 15mtr complete set . MAKE : Newage/Sangam/Fusion 6.00 Nos 3675.00

Cabinet For Fire Hose (Hose Box)- Double door Type Supply, Installation and

Testing of: Fire Hose Cabinet (Hose Box) suitable to accommodate 15 m long

fire hoses and 01 no. of nozzle. With Lock-n-key facility. Wall Mounting

Design. MOC: 18 Gauge MS Box with Powder Coating Standard with Size

750mmX7500mmX250mm:- Suitable MAKE : Newage/Sangam/Fusion 3.00 Nos 5430.00

Short Branch Pipe IS 903 Conforming Nozzle. Supply, Installation and Testing

of: Short Branch-pipe Nozzle. MOC: Stainless Steel (SS-304). Standard: ISI

Marked, Heavy Quality. Test : 21 Kgf/cm2 No. MAKE : Newage/Aaag/Sangam 3.00 Nos 1780.00

Supply Installation and commisioning of 25mm Brass Ball valve for connection

of hose reel thermoplstic pipe make-Zolato/Venus/Sant 5.00 Nos 1780.00

Butterfly Valve 100mm Dia IS

Providing fixing testing and commissioning of SS. Butterfly valve of class PN

1.6 rating of following sizes. dia, Sant brand.(I.S.I) MOC:-Body: SS, Disk: SS,

Seat: Nitrile.Make Zolato/Kartar/Osko 4.00 Nos 7640.00

Butterfly Valve 80mm Dia IS

Providing fixing testing and commissioning of SS. Butterfly valve of class PN

1.6 rating of following sizes. dia, Sant brand.(I.S.I) MOC:-Body: SS, Disk: SS,

Seat: Nitrile.Make Zolato/Kartar/Osko 3.00 Nos 5640.00

Fire Service In-let (In-let Connection for Fire Brigade)-4 Way Type. Supply,

Installation and Testing of: Fire Service Inlet with necessary hardware and

22 consumables. MOC:-Body: Heavy- uty CI. Couplings/NRV:SS Standard: -Made

As per IS Standard- Heavy duty quality. Size:-Couplings: 63 mm, 100 mm E-

table Flange End .MAKE : Newage/Sangam/Fusion 1.00 Nos 6735.00

Providing, Installation and Testing Fire extinguisher IS 15683-2006 ISI marked

BIS with Peso 3 years ABC powder type 6 Kg. Supply, installation and testing of

23 ABC powder fire extinguisher necessary hardware and consumables. Stored

pressure mechanism. Charged with MAP-50% (ABC) Dry powder. with wall

mounting clamp.Make -V Safe/ Kanex /Ceasefire 6.00 Nos 1825.00

Providing, Installation and Testing of Fire extinguisher - CO2 Gas type 4.5 kg.

24 Supply, installation and testing of CO2 Gas fire extinguisher with necessary

hardware and consumables. Standard - Confirming to IS:15683-2006 with ISI

mark with Peso 5 years certified. Make - V-Safe/Kanex / Ceasefire 6.00 Nos 4275.00

25 Providing, Installation and commisioning of Ball valve type CI Body and Brass

Foot Valve 100mm Dia with nut bolt and flange complete set 3.00 Nos 9815.00

26 Providing and fixing, testing and commissioning of Brass Sprinkler as per design

and requirement as directed by EIC make-Newage/Sangam/Fusion. 120.00 Nos 170.00

Providing and fixing, testing and commissioning of Smoke detecor with

27 complete wiring and fittings as per design and requirement as directed by

EIC.make-Ravel/System Sensor/or equivalent 110.00 Nos 2700.00

Providing and fixing, testing and commissioning of Heat detecor with complete

28 wiring and fittings as per design and requirement as directed by EIC.make-

Ravel/System Sensor/or equivalent 15.00 Nos 2960.00

Providing and fixing AUTOGLOW Signages in Block / Small Letters of

Specified Sizes: as per design and requirement as directed by EIC. 40.00 Nos 185.00

Providing and fixing, testing and commissioning of Conventional Fire Alarm

control panel for G+2 building with 250 article for 10 zones required as per

engineer insruction Make: Ravel/System Sensor/or equivalent 1.00 Job 46752.00

31 Providing and fixing, testing and commissioning of Hooter cum strobe sounder

with wiring complete fittings Make: Ravel/System Sensor/or equivalent 3.00 Nos 3240.00

32 Providing and fixing, testing and commissioning of Manuel Call point with

wiring complete fittings Make: Ravel/System Sensor/or equivalent 3.00 Nos 2915.00

Making of hole by core cutting in concrete member or masonary wall of diameter

33 0 to 200 mm as per requirement including all man material and charges of core

cutting machinery as directed by EIC 10.00 Nos 700.00

Charges for administrative consulting for obtaining Fire NOC from RMC and

34 providing fire system annual maintenance contract with all the required

documents and process & mockdrill, awareness training for staff as per rules of

fire at every 6 months for three years as per GOG norms. 1.00 Job 85000.00

(B) Bidder's Offer _____% Above/Below of (A)

(C) Grand Total (C = A + B)

(C) Grand Total (C = A + B)

(D) Goods & Service Tax ( D = C x GST in % Prevailing or Applicable )

(E) Grand Total Including GST ( E = C + D )

(E) Grand Total Including GST ( E = C + D )

Final Offer with GST In Word:

I / WE HERE BY AGREE TO CARRY OUT ABOVE SAID WORK AT______% ABOVE /

BELOW THE ESTIMATED COST MENTIONED AS ABOVE AND THUS THE AMOUNT OF MY / OUR TENDER

COMES OUT TO BE

(A) WITHOUT GST RS.(IN FIGURE)____________________.

(B)WITH GST RS.(IN FIGURE)______________________.

Signature of contractor with seal Superintending Engineer,

P.G.V.C.L., City Circle Office