FDR/mtc of RWS scheme undr Killa R.D. Blk/S.H-Repairng mtc of SBDTW by remodlng extnsn of pipelne, providng installatn of pump-motr etc. in/c othr allied works at diff locatn undr DWS SD Killa 2025-26.

Excavating trenches of required width for pipes,cables etc. including excavation for sockets, dressing of sides where required, ramming of bottoms, depth up to 1500 mm (slpoe-1 in 200) including getting out the excavated soil and bacfilling of soil as required after laying of pipeline, in layers not exceeding 200 mm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required leads as per chapter-2 of CPWD specification and direction of the Engineer-in-charge. A) For UPVC pipes in new work. a) In all kinds of soil i) For pipes not exceeding 90 mm dia.

Providing, fixing and laying rigid UPVC pipes cinforming to IS: 4985 jointing with couplers, of same class conforming to IS: 10124 Pt- II ) solvent cement conforming to IS: 14182 including testing of joints complete( but excluding the cost of specials like bends, tees, etc which will paid separately) as per CPWD specification and direction of the Engineer-in charge. A) Class-3( Working pressure 6.0kg/cm2 ). (i) 40 mm OD

Providing and laying of flexible PVC pipe (conforming to IS:7634) complete including eath work as per specification and direction of the Engineer-in-charge.( cost of fittings will be paid separately) a) 15 mm dia

b) 25 mm dia

c) 32 mm dia

Providing and fixing brass ferrule with CI cover conforming to IS: 2692 in/c boring and tapping the main as per CPWD specification and direction of the Er-in-charge. i) 15 mm nominal bore.

Providing and fixing G.I. union as per CPWD specification and direction of the Engineer-in-charge. i) 15 mm dia

ii) 25 mm dia

iii) 32 mm dia

Providing and fixing G.I. Full way valve as per CPWD specification and direction of the Engineer-in-charge. (i) 40 mm dia

Making road crossing by horizontal boring for smooth laying of UPVC/CI/DI/GI pipes etc. of required dia complete as per specification and direction of the Engineer-in-charge. I ) by manual means

Providing and fixing G.I. pipes of medium class as per IS: 1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer-in-charge. A. External work ( i ) 40 mm dia nominal bore

Providing and fixing G.I. Equal Tee with the pipeline in/c. testing of joints complete as per CPWD specification and direction of the Engineer-in charge. (i) 32 x 32 x 32 mm dia

Providing and fixing G.I. un-Equal Tee with the pipeline in/c. testing of joints complete as per CPWD specification and direction of the Engineer-in charge. (i) 32 x 32 x 25 mm dia

Providing and fixing G.I. Reducer with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. (i) 32 x 25 mm dia

Supplying and installation of water lubricated submersible pump of duke made (Model No. DSP4RFH0502) having capacity 1500 GPH at total Head upto 45 mtr coupled submersible motor 2 HP suitable for 240(+ 10% variation) single phase 50Hz, AC supply DOL method to run at 2880 RPM alongwith 35 mtrs. 2.50 sqmm PVC insulated 3 (three) core flat copper cable including fitting fixing and lowering with 40 mm dia G.I. pipe upto 100 ft. (30.00mtr) etc. complete as per direction of Engineer-in-charge (Required 40 mm dia GI pipe will be supplied by the Deptt.t at free of cost)

Supplying and fitting fixing of MS box of having size 60cm x 60cm x 45cm with slope roof and front shutter with locking arrangement fitted with 4 nos. 40mm x 40mm x 6 mm MS angle of 1.60m long in/c providing & fitting wooden board inside the box having size 55cm x 55cm x 1'' thick for fitting all the electrical features like starter, main switch and in/c cost of necessary painting & embedding the box with CC block size 30cm x 30cm x 60cm with 1:2:4(1 cement:2 R/sand:4 jhama brick aggregate 20 mm n/s) as per direction of the Engineer – in – charge.( starter,main switch etc. will be pai separately)

Please Enable Macros to View BoQ information