Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.5 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹12.7 L+₹1.0 L (8.91%)Rejected-Finance | L2 | Rejected-Finance Not being L1 |
Tender Value
₹12 L
EMD Value
₹24,000
Closing Date
29 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) Navy Jamnagar
INS Valsura, Jamnagar - 361 150
Addition/ alteration to existing Toilet Facilities to Bldg No. P-81, P-15, P-413, P-126 and P-292 at INS Valsura, Jamnagar
2022_MES_563642_1
8631
Open Tender
Civil Works - Others
Item Rate
150 days
GE (I) Navy Jamnagar
Please refer tender documents
6 documents required · 6 mandatory
₹500
GE (I) Navy Jamnagar
₹24,000
Yes
17 Mar 2023
17 Nov 2022
31 Dec 2022
17 Nov 2022
29 Dec 2022
17 Dec 2022
17 Nov 2022 - 16 Dec 2022
Amount
Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etc and removal of entire debris as ordered outside MD land complete all as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and removal of entire debris as ordered outside MD land complete all as directed.
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thick (below or above ground level) and removal of entire debris as ordered outside MoD land complete all as directed.
Dismantling floor, hearth or wall tiling inluding cement mortar bedding (but not backing), stacking serviceable tiles at site and removal of entire debris as ordered outside MD land complete all as directed.
Demolition and breaking up 150mm bore drain pipes (Salt glazed ware, AC or Reinforced concrete pipe) set in cement mortar including removal and depositing of debris to a distance not exc 50 mts and depositing where directed.
Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from frame) and stacking at site where directed.
All as per item 6 here-in-above, but exceeding 1.5 Sqm but not exceeding 4 Sqm each
M&L for PCC 1:4:8, type D2 (using 40 mm graded granite stone aggregate) as in foundations, filling and mass concrete for steel pole complete all as specified.
M&L for Reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, canopies, deck slab etc complete all as directed. (Note: Reinforcement shall be measured and paid separately.)
M&L for Reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in beams, cantileverl, bressummers, lintels over 1.5m clear spans complete all as specified and directed. (Note: Reinforcement shall be measured and paid separaterly.)
M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.
M&L for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and as directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping), flat rough finished surface all as specified.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. flat rough finished surface all as specified.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm thick and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide complete all as specified.
S&F solid PVC door frame of size 50X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as directed.
S&F factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per Specification & drawing.
S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) shutters for windows and ventilators, fixed type, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as directed.
S&F 125mm long aluminium, anodised, barrel tower bolt (ISI marked) of extruded section and fixed.
S&F 75mm size butt hinges, exruded aluminium alloy with galvanised mild steel hinges pin, anodised and fixed, type B-21.
S&F 150 mm size aluminium alloy handles (ISI Marked) fabricated type anodised and fixed.
S & F 10 mm dia and over CRS bars cut to length bent to shape required cranking including bending , hooking ends etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
All as per item No. 22 here- in – above but 5 mm dia and over upto 10 mm dia as in stirrups
M&L for preparation of newly plastered roof surfaces/ sunken floors and applying water proofing treatment on horizontal or vertical surfaces by providing 3mm thick APP modified water proofing membrane weighing not less than 3.00 Kg/ Sqm reinforced with non woven polyster matt weighing not less than 160 gms/ Sqm including minimum 10cm side over laps and 15cm end lap torch sealed and bonded and applying a coat of blown grade hot bitumen 90/15 over and below the membrane @ 1.20 Kg/Sqm in drying over the membrane finished & plastering the top of exposed surface of roof, chajja, roof projections etc with layer of 10 mm thick cement sand mormar 1:3 mixed with WPC as per manufacturer's instructions & finally after the plastered surface is dried completely complete all as manufacturers instruction and as directed. Note: (i) The quoted rate is deemed to be inclusive preparation of roof surface complete, APP treatment, 10 mm thick plastering mixed with WPC & solar reflective paint (iii) The work shall be carried out only through manufacturer or their authorised applicator and a written guarantee for work shall be submitted by the manufacturer for the effectiveness of WPT (iv) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface.
M&L for 25mm thick plain cement concrete 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) as in levelling course of floor finishes complete all as directed.
M&L for 25mm avg thick plain cement concrete 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) as in sunken floor including WPC and finished the even and smoth without using extra cement complete all as directed.
M&L for joint free non skid Coloured ceramic tiles of 7 to 8 mm thick (Square/Rectangular) area of each tiles exceediing 0.06 Sqm but not exceeding 0.11 Sqm, each in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as directed and as specified.
M&L for joint free Glazed rectified and digital ceramic colour tiles in vertical surfaces 350 x 250 x 7mm/ 450 x 350 x 7mm/ 300 x 450 x 7mm thick set and jointed in neat cement slurry including 10 mm thick back coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed. (Note for item Nos 27 & 28 : i) Quoted rate is deemed to be inclusive of cement screed. ii) Shade / pattern / Colour of tiles shall be got appproved before procurement).
S & F Granite 18-20 mm thick (of any type) work (table rubbed and polished) in steps, cills, raiser, under wash basins, platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using pigment to match with shade of granite laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified. (Note: Quoted rate is deemed to be inclusive of Screed bed)
M&L for rendering 10 mm thick in CM 1:4 on fair faces of brick work/ stone wall or concrete surface, finished the surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces on ceiling finished even and smooth without using extra cement complete all as specified.
S&F 4mm thick figured glass, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed.
Three coats of white wash on newly plastered wall surface after necessary preparation of surface complete all as directed.
Three coats of white wash on newly plastered surface of ceiling after necessary preparation of surface complete all as directed.
M&L for preparation of old surfaces of wall including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (Plastered or unplastered surfaces) and applying three coat of white wash complete all as directed.
M&L for preparation of old surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (Plastered or unplastered surfaces) and applying three coat of white wash complete all as directed.
Taking down or up damaged/ old GI pipe of 15 mm dia and S&F new 15 mm bore steel water tubing medium grade (ISI marked) with all new fittings (ISI marked) fixed to wall and ceiling or laid in floors complete all as directed.
All same as per item No 37 here-in-above but 20 mm bore of pipe -do-
S&F 15 mm bore bib taps, fancy type long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as directed.
S&F in repairs 15 mm bore bib taps, fancy type long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as directed.
S&F 15mm dia pipe health faucet (ABS Body) mild steel chromium plated with 1.2m long flexible tube and ABS wall hook including making connection and making connections and fixed in position complete.
S&F in repairs 15 mm bore stop valve fancy type, cast copper alloy, chromium plated, screwed down high pressure with cruntch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified.
S&F in repairs 15 mm bore stop valve fancy type, cast copper alloy, chromium plated, screwed down high pressure with cruntch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified.
S&F toilet Paper holder with flat recessed type stainless steel fixed to walls complete all as directed.
S&F in repairs toilet Paper holder with flat recessed type stainless steel fixed to walls complete all as directed.
S&F wall mounted soap dish, vitreous china white, approx size 160 x 160 x 90mm complete.
S&F in repairs wall mounted soap dish, vitreous china white, approx size 160 x 160 x 90mm complete.
S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as directed.
S&F in repairs Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as directed.
S&F in repairs Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as directed.
S&F in repairs 110 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches or in floors complete all as directed.
S&F in repairs 110 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints, fixed to walls complete all as directed.
S&F in repairs 75 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints laid in trenches or in floors complete all as directed.
S&F in repairs 75 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints, fixed to walls complete all as directed.
S&F in rapairs 110 mm bore size PVC (SWR) bends any radius with access door including jointing the same with solvent cement complete all as directed.
S&F in repairs 75 mm bore size PVC (SWR) bends any radius with access door including jointing the same with solvent cement complete all as directed.
S&F in rapairs 110 mm bore size PVC (SWR) branch piece (Single Y) equal or unequal with access door including jointing the same with solvent cement complete all as directed.
S&F in rapairs 75 mm bore size PVC (SWR) branch piece (Single Y) equal or unequal with access door including jointing the same with solvent cement complete all as directed.
S&F in repairs 110 mm bore size PVC (SWR) junction single (single T) equal or unequal with access door including jointing the same with solvent cement complete all as directed.
S&F in repairs 75 mm bore size PVC (SWR) junction single (single T) equal or unequal with access door including jointing the same with solvent cement complete all as directed.
S&F PVC (SWR) Vent cowl 110 mm bore size fixed complete all as directed.
S&F PVC (SWR) Vent cowl 75 mm bore size fixed complete all as directed.
S&F in repair 75 mm size PVC (SWR) floor trap with grating including jonting the same with solvent cement complete all as directed.
S&F in repair 75 mm size PVC (SWR) multi floor trap with grating including jonting the same with solvent cement complete all as directed.
M&L in repairs PVC (SWR) gully trap 125/110 mm including jonting the same with solvent cement complete all as directed.
S&F in repairs 600 mm X 480 mm size white angle back vitreous china wash hand basin including chromium plated pillar tap capstan head suitable for 15 mm bore of pipe, including cutting for and pinning ends of brackets or erecting stand, waste coupling & waste pipe complete all as directed.
S&F Vitreous china wash down water closet pan (Pedestal pattern) white complete including plastic water closet seat cover (White) closed pattern with flat bottom and cover and mild steel chromium plate or aluminium hinging device and 32mm dia PVC flush pipe high or low density suitable for low/ high level cistern connected from flush out let to WC flushing in let complete all as directed. (Note: Qouted rate shall be inclusive of Water Colset, Platic seat, Flushing cistern high / low and flush pipe).
S&F in repair Vitreous china wash down water closet pan (Pedestal pattern) white complete including plastic water closet seat cover (White) closed pattern with flat bottom and cover and mild steel chromium plate or aluminium hinging device and 32mm dia PVC flush pipe high or low density suitable for low/ high level cistern connected from flush out let to WC flushing in let complete all as directed. (Note: Qouted rate shall be inclusive of taking down existing fittings, Water Colset, Platic seat, Flushing cistern high / low and flush pipe).
S&F PVC connections 15 mm dia, 600 mm long, with PTMT nuts & washers at both ends.
M&L for concrete bed in PCC 1:3:6, type C2 (using 40 mm graded crushed stone aggregrate) to 150mm bore Hume pipe including packing and haunching completely surrondings of the pipe after they are laid and tested complete all as specified and directed. (Note: drain pipe measured and paid seperately)
M&L 150 mm internal dia. salt glazed stone ware drain pipes laid in trenches and jointed in CM 1:3 as specified.
M&L for cutting into existing manhole for connecting 150 mm bore (internal dia) new drain pipe, making good to pipe and rendering, cutting out existing benching for forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B2 using 40 mm graded granite stone aggregrate, smooth finished and reforming benching as required complete all as specified and directed.
E&M Items: Taking, down carefully copper/ aluminium point wiring (Light, Fan, socket or power) complete (fittings such as switches, celling roses, pendants, regulators, sockets, DB's) etc all as specified and directed.
Dismantling and taking down fluorescent tube light single/ double of any wattage or size, security light fittings for repair or replacement of bunt/ worn accessories etc.
M&L for point wiring with 1100 V, 1.5 Sqmm single core PVC FRLS insulated unsheathed cable, copper conductor multistranded passing through including PVC concealed conduit 20mm, concealed MS box/ PVC/ MS/ Cast Iron box and logic modular whtie plates of suitable as required at site with PVC insulated unsheathed stranded copper of size 1.5 sqmm earth copper cable, for one light point, bell point, fan point controlled by one switch including cutting and making good surface of walls applying suitable painting as required all as directed.
All as per item No. 76 here-in-above, but size of cable 2.5 Sq.mm for 16 Amp and 6 Amp (3 pin) combined, modular switch socket in independent board with earth wire 2.5 Sq.mm PVC insulated multistranded copper conductor cable all as directed.
S&F Modular switch 1 way 6 Amps,1 module all as specified and direced.
S&F Modular switch 1 way 6 Amps,1 module all as specified and direced.
S&F Modular switch 1 way 16 Amps,1 module all as specified and direced.
S&F Modular Socket 16A, 2/3 pin combined, 2 Module all as specified and directed.
S&F Ceiling rose surface bakelite White/ Ivory/ Urea finish 50 mm dia three terminals including supply and fix PVC square mounting block complete all as specified and directed.
S&F white cover plate with frame, 8 module complete all as specified and as directed.
S&F metal flush box, 8 module complete all as specified and as directed.
S&F LED 2' Glaze LED Batten high quality design aluminium extruded with decorative end caps light fitting and fixed as per manufacturer's instructions complete all as specified and as directed. Make: Jaguar Cat No. LGLZ01X010XC 10W CCT: 6500 or euivalent in Wipro/Havells/bajaj
S&F 300mm sweep metal Body Exhaust Fans AC single phase 230/ 240 V with blades and frame and louvers, including making provision of hole of requisite size in round shape in existing wall of any type and grounting the foundation bolts of required size and making good the disturbed surfaced with PCC 1:2:4 and CM 1:6 as required duly painted with new paint matching with existing shape, including taking down existing exhaust fan complete all as directed by Engineer-in-Charge. Note: Old exhaust fan shall be deposited in the AGE E/M store yard.
S&F in repairs MCB SPN 40 Amp, B curve, 240 V, 50 Hz, AC supply, 10 kA complete all as directed.
S&F in repairs MCB SP 6 to 32 amp, B curve, 240V, 50 Hz, AC supply, 10 kA complete all as directed.
Amar Constructions
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .