EMPANELMENT OF CONTRACTOR FOR THE WORK OF REPAIRING AND RENOVATION WORK IN DIFFERENT AMC BUILDINGS IN DIFF. WARDS OF NORTH WEST ZONE IN AHMEDABAD

Name of Work: Repairing and renovation work in different AMC Buildings in different Wards of North West

Zone in Ahmedabad City

Sr. No Qty Items rate 23-24 Per

Excavation for foundation up to1.5 m depth including sorting out and stacking of

1 useful materials and disposing of theexcavated stuff upto 50 Meter lead.(A)

Loose or soft soil (R & B S.O.R 2023-24 I.no. Item Code 04001A)

Upto 1.5 mt Depth 115.92 Cmt

1.5 to 3.0 mt.depth 128.52 Cmt

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

2 foundations etc. in layers not exceeding 20 cm. in depth consolidation each 129.1 Cmt

deposited layer by ramming and watering.

Providing and laying cement concrete1:5:10 (1-Cement: 5- coarses

3 sand and:10-hand broken stone aggregates 40mm nominal size) and curing 2492.51 Cmt

complete excluding cost of formworkin (A) Foundation and Plinth.

Providing and laying cement concrete1:4:8 (1-Cement: 4- coarses and:8-

4 hand broken stone aggregates 40mm nominal size) and curing complete 2653.67 Cmt

excluding cost of formworkin (A) Foundation and Plinth

Providing and laying cement concrete1:3:6 (1-Cement: 3- coarses sand

5 and:6-hand broken stone aggregates 40mm nominal size) and curing 2976 Cmt

complete excluding cost of formworkin (A) Foundation and Plinth.

Providing and laying cement concrete 1:3:6 (1-Cement:3-coarse sand:6-

6 crushed stone aggregates 20mm nominal size) and curing complete including 4006.15 Cmt

cost of formwork in (A) wall caps/coping

Providing and laying cement concrete work 1:2:4 ((1-Cement:2- coarse

7 sand:4-graded aggregates 20mm nominal size) curing complete

excluding cost of formwork and reinforcement.

a Foundations, footings, base or columns and mass concrete 3923.53 Cmt

Slabs, landing, shelves, balconies, lintels, beams, girders and cantilivers

upto floor two level

c Independent piers, columns, and pillars, upto floor two level 3661.3 Cmt

Provdg. & laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregates 20 mm nominal size) for reinforced concrete chhajjas

not exceeding 10 cm. thickness upto floors two level including finishing

8 the exposed surfaces with cement mortar 1:3 (1 cement : 3 find sand) to give a 6487.07 Cu.M.

smooth and even surface centering and form work and curing complete

excluding cost of reinforcement.

Providing and laying controlled cement concrete / Ready Mix Concrete of

9 M-200 and curing complete, excluding the cost of form work and

reinforcement for reinforced concrete work in:

(A) Foundations, footings, base of columns, and mass concrete. 3977.88 Cu.M.

(B) Walls from top of foundations /level up to floor Two level. 4484.17 Cu.M.

Slabs,landing,shelves,Balconies Lintels, Beams, Girders and Cantilever upto floor

(D) Columns, pillars, posts, and struts, up to floor two level. 4558.2 Cu.M.

(E) Staircase up to floor two level. (excluding landing) 5418.91 Cu.M.

(K) Vertical and horizontal fins up to floor two level. 4701.97 Cu.M.

Providing and Laying ordinary cement concrete 1:2:4 (1-Cement 2-

coarsesand: 4-graded stone aggregates 20 mm nominal size) and finishing

10 smooth with curing etc. complete including the cost of form work but excluding the 6241.78 Cum

cost of reinforsement for R.C.C work in (iv) Slabs having more than 13 cm and

upto 15 cm.thickness

Providing and Laying ordinary cement concrete 1:2:4 (1-Cement 2-

coarsesand: 4-graded stone aggregates 20 mm nominal size) and finishing

11a smooth with curing etc. complete including the cost of form work but excluding the 7401.59 Cum

cost of reinforsement for R.C.C work in (iv) Slabs having more than 8 cm and upto

10 cm.thickness

Brick work using common burnt clay building bricks having crushing

12 strength not less than 35kg./Sq.Cm.in foundation and plinth in Cement

Mortar1:6 (1-Cement :6 - fine sand)

(A) Conventional (upto 10 ton) 3981.21 Cmt

B) Modular 4241.7 Cmt

Extra Rate for brickwork in Above Item for super structure above plinth level

upto floor two level (B) Conventional

a (A) Conventional 272.25 Cmt

b B) Modular 262.35 Cmt

C) above floor two level Item No. 2(6.13) (A) Modular Per Cum

D) above floor two level Item No. 2(6.13) (B) Conventional Per Cum

Half brick masonry in common brunt clay building bricks having crushing

14 strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:5 ( 1-Cement : 5 coarse 583.49 Smt

sand ) in foundation and Plinth conventional brickwork

Extra for half brick masonry in super structure above plinth level upto floor

two level (B) conventional

Providing form work in ordinary timber planking so as to give a rough finish

16 including centering, shuttering, strutting and propping etc. height of propping

and centering below supporting floor to celling not exceeding 4 M & removal

of the same for in situ reinforced or plain concrete work upto floor four level

a Foundation, footings, bases of columns etc. and mass concrete. 171.68 Smt

(B) Flat surfaces such as soffits of supspened floors slabs Landings and the like. (1)

Floors etc. upto 200 mm in thickness.

(B) Flat surfaces such as soffits of suspended floor roof slabs Landings and the like.

(2) Floors etc. above 200mm in thickness.

Vertical surface such as walls (any thickness) partitions and the like including

attached buttresses & string course & the like.

(ii) Sides And Soffits Of Beam, Haunchings Cantilevers, Girders, Bressumers

And Lintels Not Exceeding 1 M In Depth.

(G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in plan.

g (2) Circular or curved in plan. 422.1 Smt

(H) (2) Sides and soffits of Beams Beam Haunchings canti-levers Girders

Bressumers and Lintels exceeding 1M.in Depth.

Providing and fixing 35 mm thick panelled, glazed or panelled and glazed

17 shutters for Doors windows and clear story windows including anodised

alluminium But hinges with necessary screws and indian teak wood shutters with.

a (A) Plywood sheet panels. 3459.09 Smt

b (B) Particle board panels 3464.51 Smt

c (C)Hard board panels. 3433.65 Smt

d (D) Asbestos sheet panels. 3406.53 Smt

Providing and fixing 25 mm thick shutters for cup boards etc. including

18 black enamelled M.S. butt hinges with necessary screws.(A) Indian teak wood. 3006.75 Smt

(i) Fully Panelled.

a Providing and fixing 25 mm thick shutters for cupboards etc. including anodised 3006.75 Smt

alluminiu butt hinges with necessary screws. (A) Indian teak wood. (ii) Fully Glazed.

Providing and fixing 25 mm thick shutters for cupboards etc. including anodised

b alluminiu butt hinges with necessary screws. (A) Indian teak wood. (ii) Partly panelled 2814.42 Smt

and partl glazed.

Providing and fixing M.S. grills of required pattern to wooden frames of windows

19 etc. with M.S. flats at required spacings and frame alround, square or round 100.17 kg

bars with round headed bolts and nuts or by screws (A) Plain Grill.

Providing and fixing glazed louvered glass windows and ventilators

20 with teak wood frame 10 cm. x 7 cm. size including 3 coats of oil painting to 4102.54 Smt

wood work etc.complete.

Providing and fixing glazed louvered glass windows and ventilators

21 with teak wood frame 10 cm.x7 cm. size including 3 coats of oil painting to 4332.47 Smt

wood work etc.complete.with wooden louvers plank 12mm thick

Providing and fixing 35 mm thick shutters for Doors, windows and clere story

22 windows including Indian teak wood frames 10 cm x 7 cm. size including 4595.06 Smt

anodized alluminium fixtures and fastenings including primer coat of approved

quality and two coats of oil painting etc, complete.(ii) Fully Glazed.

Providing and fixing 35 mm thick shutters for Doors, windows and clere story

23 windows including Indian teak wood frames 10 cm x 7 cm. size including black 5285.45 Smt

enamelled iron oxidixed fixtures and fastenings including primer coat of

approved quality and two coats of oil painting etc, complete.(ii) Fully Panelled.

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows

a including Indian teak wood frames 10 cm x 7 cm. size including anodized alluminium 4940.25 Smt

fixtures and fastenings including primer coat of approved quality and two coats of oil

painting etc, complete. (iii) Partly panelled and partly glazed.

Providing and fixing 30 mm thick FACTORY MADE SOLID PANEL PVC DOOR

SHUTTER consisting of frame made out of M.S.tubes of 19 gauge thickness and

size of 19 mm x 19 mm for stiles and 15 mm x 15 mm for top and bottom rails.M.S.

frames hall have a coat of steel primers of approved make and manufacture,

M.S. frames hall be covered with 5 mm thick heat moulded PVC ‘C’ channel of

24 size 30 x 50 mm formings tiles, and 5 mm thick 75 mm wide PVC sheets for to 1135.02 Smt

prail, lock rail and bottom rail on either side, and 10 mm (5 mm x 2) thick, 20 mm

wide cross PVC sheet as gap insert for top rail and bottom rail, Panelling of

stiles and rails with 30 mm wide x 5 mm thick PVC sheet beading on eighter

side, and joined together with solventcement adhesive,. An additional 5 mm thick

PVC strip of 20 mm width is to be stculkon the interiors side of the ‘c’ channel

using PVC solvent cement adhesive etc. complete as per direction of

Engineer incharge, manufacture’s specification and drawing.

Providing and fixing in position collapsible steel shutters with vertical

channels 20 x 10 x 2 mm braced with flat iron diagonal 20 x 5 mm size with top

25 and bottom rails T iron 40 x 40 x 6 mm with 38 mm dia steel pulleys complete with 5391.23 Sq.M.

bolts, nuts, locking arrangements, stoppers, handles, including a priming coat

of red lead paint & approved make.

Providing and fixing 1 mm thick M.S. sheet sliding shutters with frame and

diagonal braces of 40x40x6 mm angle iron, 3.15 mm M.S.gusset plates at

26 Junctions and corners 25 mm dia. pulley, 40x40x6 mm angle and T- 3652.12 Sqm

iron guide rail at top and bottom respactively with handles, stoppers and

locking agangement etc, including applying a priming coat of red lead paint.

Providing & Fixing in position Alluminium doors with frame using approved

quality anodised extruded alluminium section as approved by Engg.in

charge(Jindal alluminium) (a) Frame sections 101.6x44.45 mm (b) Shutter bottom

vertical & top section 83.5x44.45 (wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter

27 bottom section at 114.3x44.45 mm at (1.37kg/mt) Shutter middle section at 2900 Smt

100x44.3 wt.(1.37 kg/mt) incl.providing & installing 5 mm thick approved

color Acrylic sheet of standard quality fixed with glazing chips on upper pannel

& Laminated sheet on lower pannel (wtt.0.13 kg/Rmt) etc.comp.as

direction of engg.in charge.(N.S.)

Providing and fixing extruded aluminum window having extruded aluminum Colour r

Powder Coated section frame main outer size 127mm x 38.10mm x 1.35mm ,@

Wt.1.384 Kg/mt,horizontal Four track member size 122.20mm x 31.75mm x 1.10mm

@ Wt. 1.205 Kg/mt,vertical member of size 122.20mm x 31.75mm x 1.50mm ,@ Wt.

28 1.398 Kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm 2119.14 Sq. M.

@ wt.of 0.456Kg/mt,vertical member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt,@ with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for window.

Providing & Fixing in position Alluminium vents with frame using approved

anodised extruded alluminium section as approved by Engg. In

29 charge.(Jindal alluminium) units equivalent Approved Rate)Frame section of 63.50 1950 Sq. M.

x 38.50 mm. (wt. 0.68Kg/Rmt) incl. Providing & Installing 5 mmthick approved

color Acrylic sheet of standard quality etc. comp.

Providing and fixing standared extruded of alluminium section of size

30 mmx38.10 mmx1.2 mm (Jindal Section:2434, or equivalent @ Wt.0.643 Kg/mt) 1163.92 Sq. M.

with colour anodized alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for Ventilation

Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x

1.95 mm,@ Wt 1.094Kg / Rmt with colour Powder Coated alluminium frame with

31 mm thick transparent bronze colour tinted float glass as details etc complete for Fix 2141.88 Sq.M.

Providing and laying 40 mm thick marble chips flooring rubbed and polished

(I.E.terrazo) to granolithic finish with under layer 30 mm thick cement concrete1:2:4

(1-Cement: 2-coarse sand: 4-graded stone aggregate 10 mm and down

32 gauge) and to player 10 mm thick with white, black or white and blak marble cihps of 811.13 Sqm

required sizes from 1 mm to 4 mm nominal size laid in cement marble powder mix 3:1

(3- Cement:1-Marble powder by weight) in proportion of 4:7 (4- Cement:

7-marble chips by volume) (C) Medium Shade pigment with approx

50% white cement and 50% ordinary cement (In top layer only) (upto 10 ton)

Providing and laying marble chips skirting (Terrazo) or dedo rubbed, and

polished to Granolithic finish to player 6 mm white, black or white and black

marble chips of size from smallest to 4 mm nominal size laid in cement

33 marble powder mix 3:1 (3-Cement: 1 marble powder by weight) in proportion 869.4 Sqm

of 4:7 (4-cement marble powder mix: 7-marble chips by volume) (B) Light shade

pigment with white cement (In top layer only)

Providing and laying white glazed tiles 6mm thick in flooring treads of steps and

34 landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) 908.17 Sq.M.

finishing with flush

Providing and laying Ceramic tiles 6 mm thick in flooring treads of steps and

35 landing laid on a bed of 12 mm thick cement mortar 1:3 (1- cement :3-coarses and) 960.47 Sq.M.

finishing with flush pointing in white cement.

Providing & Fixing 20 mm thick Mirror Polished Decorative Granite Board with

Computerised Golden Letters Discription as per instructions of engg. in

36 charge to M.S. frame structure for Inaugaration & Public Handover 4304 No.

Function (N.S.)

Providing and laying Vitrified tiles 8 to 10 mm thick, 36''x36'' in flooring treads of steps

37 and landing laid on a bed of 12 mm thick cement mortar 1:3 (1-cement:3- 1469.91 Sq.M.

coarses and) finishing with flush pointing inwhite cement.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24''x24'' in skrting risers of steps

38 and dedo on 10 mm thick cement plaster 1:3 (1- cement: 3-coarse sand) 1130.15 Sqm

and jointed with white cement slurry

Providing and laying Vitrified tiles 8 to 10 mm thick, in skrting risers of steps and

39 dedo on 10 mm thick cement plaster 1:3 (1-cement:3- coarse sand) and 1523.61 Sqm

jointed with white cement slurry

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of

40 steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1- cement : 3- 1062.5 Sq. M.

coarse sand ) finishing with flush pointing in white cement.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

41 existing flooring by adhesive material including dismentaling of existing flooring and Sq. M.

jointed with color cement slurry including finised with flush pointing & cleaning the

surface etc. complete for antiskit

Providing and laying polished Kota stone slab flooring over 20 mm (Average)

thick base of cement mortar 1:6 (1-cement:6-coarses and) or L.M.1.1.5

42 (1-Lime putty:1.5-coarses and) laid over and jointed with grey cement slurry 982.83 Sq.M.

mixed with pigment to match the shade of slab including rubbing and

polishing etc. complete. (A) 25 mm thick

Providing and laying marble stone slab flooring over 20mm (average)base of cement

mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand)

43 laid and jointed with gray cement slurry including rubbing and polishing complete. (A) 2194.63 Sq.M.

Marble slab 25mm thick

Providing and laying polished Kota stone slab flooring over 20 mm (Average)

thick base of cement mortar 1:6 (1-cement:6-coarses and) or L.M.1.1.5 laid

44 over and jointed with grey cement slurry including rubbing and polishing 1085.48 Sq.M.

etc.complete. (B) 30 mm thick

Providing and laying polished kota stone slab 25 mm thick in risers of steps, skirting

45 Dedo and pillars laid on 10 mm thick cement mortar 1:3 (1-Cement :3 coarses 1176.03 Sq.M.

and) and jointed with gray cement slury mixed with pigment to match the

shade of slab including rubbing and polishing etc.complete.

Providing and laying cement concrete flooring 1:2:4 (1-cement: 2-coarses

46 and:4-graded stone aggregate 20mm nominal size) laid in one layer and finished 297.68 Sq.M.

with a floating coat of neat cement. (A) 40mm thick.

Providing and laying cement concrete flooring 1:2:4 (1-cement: 2-coarse

47 sand:4-graded stone aggregate 20mm nominal size) laid in one layer and 348.08 Sq.M.

finished with a floating coat of neat cement. (B) 50mm thick.

Providing and laying broken china mosaic flooring for terrace using 12 mm to

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope

48 and to be tempered to bring mortar creme out upto surface using white 739.89 Sqm

cement including rounding off junctions and extending them up to15 cm

along the wall, clearing with water and oxalic acid etc.as directed.

Providing and laying coloured glazed tiles of the size 300 mmx200

mmx8 mm/300 mmx450 mmx8 mm in skirting, risers of steps and dedo on

49 10 mm. thick cement plaster 1:3 (1cement: 3 coarse sand) & jointed with 1426.95 Sqm

white cement slurry.

Providing ridges or hips 600 mm overall in plain G.I. sheet class-3 fixed with

50 G.I. J or L Hooks and nuts 8 mm dia G.I. Limpet and bitumen washer 635.58 Sqm

complete. (1) 0.80 mm thick sheet.

Providing and fixing 150 mm wide 450 mm over all semi circular plain G.I.sheet

51 class-3 gutter with Iron brackets 40 mmx3 mm size Bolts, Nuts, washers etc. 555.71 Sqm

including making necessary connection with rain water pipes. (i) 0.80 mm thick Sheet.

Providing and fixing five courses water profing treatment with bitumen felt

consisting of second and fourth course of blown/ bitumen or/and residual

bitumen applied hot at 1.2 kg.per Sq.M.of area for each course and first

52 course with fibre base bitunen saturated under lay type land third course with 466.84 Sqm

fibre base self finished felt type 2 grade 1 and fifth and final course of stone grit

mm and down size or pea sizes gravel spread at

Cu.Metre/Sq.metre preparation of surface excluding grading complete.

Providing and fixing on wall face C.I. Rain water pipe including filling the joints with

53 spun yarn soaked in neat cement slurry and cement mortar 1:2(1- Cement : 283.62 Rmt

2-fine sand) (A) 75 mm dia.

Providing 15 mm thick cement plaster in single coat on Rough (Similar) side

54 of single or half brick walls for interior plastering up to floor two level and 174.83 Sqm

finished even and smooth in (i) Cement mortar 1:3 (1-cement :3-sand)

Providing 20mm thick sand faced cement plaster on walls upto height 10 metres

55 above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3- 297.68 Sqm

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Colour washing with lime on wall surface (two coats) over and including a

56 primary coat of white washing to give an even shade after through brooming the 12.29 Sqm

surface to remove all dirt, dust, mortar drops and other foreigh matter.

Removing dry or oil bound distemper by a washing and scraping

57 and sand papering the wall surface smooth including necessary repairs to 11.19 Sqm

scratches complete.

Distempering with dry distemper of approved brand and manufacture (two coats)

58 and of required shade on wall surfaces of given an even shade, over and 46.94 Sqm

including a priming coat of whiting after thoroughly brooming the surface

free from mortar dropping and other foreign matter.

Distempeing (Two coats) with oil bound distemper of approved brand and

manufacture and of required shade on wall surfaces to give an even shade,

59 over and including a priming coat with distemper primer of approved 76.08 Sqm

brand and manufacture after thoroughly brushing the surface free from

mortar dropping and other foreign matter and also including preparing

the surface even and sand papered smooth.

Extra Coat for Above Item over above for every subsequent coat of

approved brand and manufacture.

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including

61 throughly brushing the surface free from mortar droppings and other foreign 78.44 Sqm

matter and sand papered smooth.

Extra over item for every sub sequent coat of wall painting with plastic emulsion

paint of approved brand

Extra over item for painting with plastic emulsion paint of approved brand on ceilings

and sloping roofs.

Applying priming coat over new steel and other metel surface after and

63 including preparing the surface by throughly cleaning, oil, grease, dirt and 34.34 Sqm

other foreign matter and scoured with brushes fine steel wood, scrapers and

sand paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade including

64 cleaning the surface an even shade including cleaning the surface of all dirt, dust 86.94 Sqm

and other foreign matter.

Painting one coats (excluding priming coat) on previously painted steel and

65 other metal surface with enamel paint, brushing to give an even shade including 54.35 Sqm

cleaning the surface of all dirt, dust and other foreign matter.

66 Extra over item for every sub sequent coat of paint. 50.4 Sqm

Painting two coats (excluding priming coat) on new steel and other metal

67 surface with synthetic enamel paint, brushing to give an even shade including 64.66 Sqm

cleaning the surfaceofalldirt,dust and other foreign matter.

Painting one coats (excluding priming coat) on previously printed steel and

68 other metal surface with synthetic enamel paint, brushing to give an even shade 43.79 Sqm

including cleaning the surface of all dirt, dust and other foreign matter.

69 Extra over Above item for every sub sequent coat of paint. 43.47 Sqm

Painting two coats (excluding priming coat) on external surface of new rain

water, soil, waste and vent pipes and fittings with ready mixed bituminous

70 brushing, black, anti corrosive to give an even shade including cleaning of all 20.16 Sqm

dirt, dustand other foreign matter.(75 mm dia)

Painting two coats (excluding priming coat) on external surface of new rain

water, soil, waste and vent pipes and fittings with ready mixed bituminous

71 brushing, black, anti corrosive to give an even shade including cleaning of all 25.05 Sqm

dirt, dust and other foreign matter.(100 mm dia)

Painting two coats (excluding priming coat) on new wood and wood based

72 surface with enamel paint, interior to give an even shade including 26.78 Sqm

cleaning the surface of all dirt, dust and other foreign matter sand papering

and stopping. (a) Ready mixed paint brushing wood primier pink.

Painting one coats (excluding priming coat) on previously painted wood and

wood based surface with enamel paint, to give an even shade including cleaning

73 the of all dirt, dust and other foreign matter.(b) Ready mixed paintbrushing priming for 26.78 Sqm

74 Extra over Above item for every sub sequent coat of paint. 24.26 Sqm

Painting two coats (excluding priming coat) on new wood and wood based

surface with ready mixed paint, brushing, oil, gloss, semi gloss to give and even

75 shade including cleaning of all dust, dirt and other foreign matters and 104.12 Sqm

papering and stopping.

Finishing wall with weather proof exterior emulsion paint on wall surface (two

coats) to give an required shape even shade after thoroughly brushing the

76 surface to remove all dirt, and remains of loose powdered materials.etc 113.4 Sqm

Applying two coats of Birla (white cement based) or Asian (acryliclapy-

putty) or equivalent & two coats of primer of approved brand and manufacture

77 on new wall surface to give an even shade including thoroughly brushing the 40.19 Sqm

surface free from mortar dropping and other foreign matter and sand papered

Painting one coats (excluding priming coat) on previously painted wood and wood

78 based surface with enamel paint, to give an even shade including Sq.M.

cleaning the of all dirt, dust and other foreign matter.

Writing letter or figures on any surface with black japan paint (stops, per

79 comas, hyphens and the like not to be measured and paid for separately) 3.15 letter per

(i) Block (Letters/Figures) (Per 10 Letter pet CM.HT) Cm/Ht

Demolition including stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including stacking of serviceable

81 materil as and disposalof unserviceable materials with all lead and lift.(ii) In 544.95 Cu.M.

82 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable 47.25 Sqm

materil as and disposal of unserviceable materials with all lead and lift.

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc.

83 stacking of serviceable materil as and disposal of unserviceable materials 47.25 Sqm

with all lead and lift.(i) G.I.sheet roofing.

Dismentling steel work including distempering and stacking the materials

with all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraves, hold fasts and other attachment etc.

85 complete and stacking the material within all lead and lift.(i) Not exceeding 3 Sq.M. 185.85 Each

Dismentling doors, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraves,hold fasts and other attachment etc.

86 complete and stacking the material with in all lead and lift.(ii) Exceeding 3 248.85 Each

Dismentling barbed wire in fencing including making rolls and also including

dismentling fencing posts including all earth work concrete in base and making

87 good the disturbed ground stacking useful materials as directed and 66.15 Rmt

disposing as directed and disposing of the unserviceable materials

with all lead and lift.

88 Dismentling C.I. pipes G.S.W. pipes abd A.C. rain water pipes with fittings 74.03 Rmt

and clamps including stacking the materials with all lead and lift (for any dia, of pipe)

89 Dismantling santtary fittings like wash basin . W.C. pan Indian and Europe an 401.63 Each

type, flushing tank etc. including stacking the materials with all lead and lift

Scraping oil paint from steel and other metal surface and making the surface

even (with Hand Scraping.)

Removing and scraping of old deteriorated plaster of any thickness

91 from wall / R.C.C member including stacking of serviceable material and 19.38 Smt

disposal of unserviceable from site of work with all lead and lift

Providing and fixing M.S. fan clamps of shape and size as specified in

existing R.C.C. slab including cutting chase and making good.

Cutting out cracks of roof terrace to V-section, cleaning out, wetting, grouting with

cement and sand slurry 1:3 (1-cement 3-sand )

94 Cutting out cracks roof terrace to V-Section cleaning out and filling solidly with 75.29 Rmt

a hot mixture of bitumen and clean dry sand (1:1 by weight)

Providing & Fixing in position Alluminium doors with frame using approved

quality anodised extruded alluminium section as approved by Engg.in

charge(Jindal alluminium)(a) Frame sections 101.6x44.45 mm (b)

Shutter bottom vertical & top section 83.5x44.45 (wt.1.31 kg/mt.)(at

95 kg/mt) (c) Shutter bottom section at 114.3x44.45 mm at (1.37 kg/mt) Shutter 2900 Sq. M.

middle section at 100x44.3 wt.(1.37 kg/mt) incl.providing & installing 5 mm

thick approved color Acrylic sheet of standard quality fixed with glazing chips

on upper pannel & Laminated sheet on lower pannel (wtt.0.13 kg/Rmt)

etc.comp.as direction of engg.in charge.(N.S.)

Providing & Fixing in position Fully Panelled / Partly Panelled Partly Glazed / Fully

Glazed Alluminium doors with frame using approved quality anodised

extruded alluminium section as approved by Engg. In charge.(Jindal alluminium )(a)

Frame sections 101.6x44.45 mm b) Shutter vertical & top section

96 83.5x44.45 (wt. 1.31 kg/mt.)( at 1.31 kg/mt) © Shutter bottom section at 114.3 4583 Sq.M.

x44.45mm at ( 1.37 kg/mt ) Shutter middle section at 100x44.3 wt. (1.37 kg/mt )

incl. providing & installing 5 mm thick Glass of standaed quality fixed /

mm thick Laminated sheet with glazing chips (wt. 0.13 kg/ Rmt) in panels etc.

comp. as per Detail Given & direction of engg.in charge.

Providing & Fixing in position Alluminium window 2/3/4 track sliding / fix

type with frame using approved anodised extruded alluminium section as

97 approved by Engg. In charge.(Jindal alluminium) units equivalent. 4518 Sq. M.

including P/F installing 5 mm thick clear/tinted Glass of standard quality

Providing & Fixing in position Alluminium vents with frame using approved

anodised extruded alluminium section as approved by Engg. In

98 charge.(Jindal alluminium) units equivalent Frame section of 63.50 x 38.50 mm. 4218 Sq. M.

(wt.0.68 Kg/Rmt) incl. Providing & Installing 5 mm thick Glass of standard

quality etc. comp.

Providing and fixing of Ridge flashing for roof panel shall be made out

of 0.5 mm thick pre coated GI sheet. The Pre coatedsheet shall be of

minimum 240 mpa steel grade confirming to IS 14246:1995 and shall have

zinc coating of minimum 120 gsm as per IS:277:1992, 5-7 microns epoxy

99 primer on both side of the sheet and polyester top coat 15-18 micron. The PP 510.1 Sqm

GI Sheet shall have plastic protective guard film of minimum 25 microns to

avoid scratches during transportation. The ridge shall be fixed to the steel

members by poprivetor self drilling/self stitching fastners @ maximum

450mm c/c along length of capping/flashing etc complete .

100 Supplying and fixing vinyl flooring over the surface having 1-2 mm thickness 963 Smt

as per directed by engineer incharge etc as completed (N.S.)

Providing and laying 15mm bamboza wooden flooring as per architect's

101 drawing with all necessary details as directed by the project consultants. 2690 Smt

Use underlay for better result as per Detail specifications and directed by the

project consultants. (N.S.) Approved Rate )

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle

posts 40 mm x 40 mm x 6 mm and oil painting 3 coats fixed at 2.5 Mt, C/c.

with five Horizontan lines and two diagonals of galvanised steel barbed wire

102 weighting 9.38 Kg. per 100 Metre, strained and fixed to posts with G.I, staples 385.4 Rmt

including fixing the posts in ground with 0.5 M x 0.5.M x 0.5 M. block in C.C

1:5:10 etc complete.

Renovation and Repairing work in Chainlink fencing any size and also refixing

103 work incl. febrication work with all materails to be painted one coat of 735 Rmt.

primer and twocoats of paint as directed inline and level. (N.S.)

Constructing a sink (chowkedi) with C.C. 1:2:4, 12 cm. thick over B.B.

masonry in C.M, (1:6) in front and dwarf wall 1.0 Mt. high and 23 cm. thick cement

104 plaster to masonry / in C.M.1:3) and cement concrete flooring in 1:2:4: mix 2235.66 Rmt

5cm.dia.drain pipe etc.complete.

Constructing a cooking platform 60 cm. width and 70 cm high resting on B.B.

105 Masonry walls 23 cm. thick in C.M. (1:6) with (i) Fixing or precast R.C.C. 933.98 Rmt

1:2:4) 8 cm. thick slab with marble chips set in C.M. (1:6) (6 mm thick terrazo)

with plastering on exposed faces walls in C.M. (1:4) etc complete.

Extra rate for using Ready Mix Concrete of any grade for below ground level

to vertical upto any floor with delivery & suction Pipe & Pump etc. The rate

106 includes fule, pump operator, skilled labor, driver etc completed and as per direction 760 Cmt

of engineer in charge

P/A Tremix with dewartering machine and floater machine on constructed

107 CC work for finishing the surface as per requirement. The rate including all 54 Sq.M.

machinaries, labor, loading, unloading, transportaion etc complete as per

direction given by engineer incharge.

Carrying out timber treatment to all wood work including drilling holes and spraying oil

based chemical solution on surface of timber work for termite control including labor

and material etc. complete. Using Chlorpyriphos20 EC as per 6313 2013 Part III (1%

108 concentration by mass) is recommended one litre chemical emulsion diluted with 19 54.98 Smt

liters of kerosene. Total diluted concentration will be 20 liters inclusive of 1 liter

chemical emulsion application in drilled holes and 0.75 / Litre chemical per one Sqmt

two coat on wood surface not protected by paint or varnish.

Applying general insecticide pest control treatment to floors, cupboards etc including

labour materials etc. complete. Using Imidacloprid 30.5 SCas Per IS 6313 part -II(

(0.075% concentration by mass) is recommended 10.5ml chemical diluted with 5

liters of water application 0.5 litre chemical /Sqm of

surface is recommended as per I.S.

Carring out plinth treatment to post construction / existing structure by spraying

chemical solution for termite control treatment including labour and material

consist ment with I.S. specification. Using Chlordene and Chior purfiles

110 EC. As Per 6131_paret-II Consentration Weight on percentis recommended 104.9 Smt

i.e one litre 20 EC chemical emulsion with 19 liter give 1% concrentration

inclusive of one litre chemical emulsion appication attherate of 5 Litre

chemical / Sqm of surface is recommended as per I.S

Carrying out wall treatment for termite control including spraying with chemical

solution in oil base including labour and material Using Chlorpyriphos 20 ECAs per IS

111 6313 part - II (1% concentration by mass) is recommended i.e one litre chemical Smt

emulsion diluted with 19 liter oil base. Total solution will be 20 liters inclusive of one

liter chemical emulsion application at the rate of 7.5 litre chemical / Sqm of surface is

recommended as per I.S.S

Providing erecting and fixing double coated Syntex or equivalent

112 PVC.(ISI) water tank of required capacity each with all necessary fittings and 3.91 Litre

connection etc. complete on terrace.

Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes

113 (Medium grade) of the following nominal bore, tube fitting and clamps including

making good the wall ceiling and floor.

(A) 15mm 244.13 Rmt

(B) 20mm 297.25 Rmt

(C) 25mm 393.93 Rmt

(D) 32mm 491.51 Rmt

(E) 40mm 596.73 Rmt

(F) 50mm 779.6 Rmt

Providing and laying in trenches galvanised mild steel tubes (Midium

grade) of the following nominal bore, and tube fitting (Earth work in

114 trenches to be measured and paid for separately)

(A) 15mm 150.91 Rmt

(B) 20mm 190.97 Rmt

(C) 25mm 279.39 Rmt

(D) 40mm 421.12 Rmt

(E) 65mm 716.66 Rmt

(H) 80mm 910.69 Rmt

Making connection of galvanised Mild steel distribution branch with galvanised

mild steel main 50 mm to 80 mm nominal bore by providing and fixing tee 600.08 Each

115 including cutting and threading the pipes complete.

Providing and fixing to wall ceiling and floor 6.0 Kg.F/Cm2 working pressure

poluthene pipes of the following out side Dia. Low densidy, complete

with special falnge compression type fittings,wall clips etc.including

116 making good the wall ceiling and floor.

(A) 20 mm 78.12 Rmt

(B) 25 mm 100.49 Rmt

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2 working pressure

polythene pipes of the following out side Dia. Low densidy, complete

with special falnge compression type fittings, wall clips etc. including

117 making good the wall ceiling and floor.

(C) 32mm 116.4 Rmt

(D) 40mm 124.43 Rmt

(E) 50 mm 165.38 Rmt

(F) 75mm 274.68 Rmt

(G)110 mm 332.91 Rmt

Providing and fixing cast iron (Spun) Nahni trap of the following nominal

diameter of self cleaning design with C.I. screaed down or higned grating

including cost of cutting and making good the walls and floor 100 mm inlet and 50 600.08 Each

118 mm outlet.(C)100mm dia.

Providing and fixing water closet squatting Pan (Indian type W.C.Pan)

size 580 mm (Earth work, bed concrete, foot rest and trap to be measured 926.1 Each

119 and paid for separately) (A) Vitreous China. (I)Long pattern = White colour

Providing & fixing Wall-mounted European Closet Suite P -Trap (White/Light Coloured)

with Dual Flush Tank, PVC pan connector, seat & lid (heavy duty) including C.I.

Brackets,C.P. Flush cock, C.P. brass hinges, All Internal fittings complete with rubber 7492.25 No.

buffers, C.P. nuts, bolts, ChaKi, etc making holes in walls & floors, & finishing for ready to

use.The rate includes Providing & fixing 15mm Angle Valve with braided hose pipe as

120 per product detail, jet spray including cutting and making good the wall where required .

Providing and fixing wsh down water closet (Europe an type, W.C.Pan) with

integral P or S trap including jointing the trap with soil pipe in Cement 1290.8 Each

Mortar1:1 (1- Cement:1-fine sand) (Seal and cover to be measured and paid

121 forseparately) (A) vitreous China Pattern :(i) in white colour

Provdg. & Fixing Flat Back Large Urinal of White/ colour of "Cera" or " Hindware"

incl. C.P. Brass waste coupline , waste pipe, pvcconnection etc. 1850 No.

122 Complete.( size 635 x395x420 mm )

Providing & Fixing Angle cock of " Ess Ess" - Trend series or equivalent 675 No.

123 standard make as approved by engg. in charge all complete. (N.S.)

Providing and fixing 100 mm size P or S trap for water closet squatting pan

including jointing the trap with the pan and soil pipe in cement Mortar1:1 (1- 311.85 Each

124 Cement : 1-Fine sand)(A) Vitreous China.

Providing and fixing coloured glazed oval type counter wash basin 550 x 460 in size and

make specified by the Architect with one C .P. pillar cock, C.P. stop cock, P.V.C. feed pipe

C.P. waste coupling (1 ¼"), rubber plug with C .P. chain, CP (as per architectural detail

Providing & fixing stainless steel sink, R.S. or C.I. Painted brackets painted, 40mm dia.

C.P. waste, C.P. brass chain and rubber plug , strainer with necessary C.P. brass unions

complete including painting the fittings and cutting and making good the walls wherever 4993.78 No.

required, with CC sink cock with raised "J" shaped swinging spout . The scope includes the

following fixtures. (Make: Nirali-Grace - plain -510mm x

126 432mm bowl with Swan neck tap or equivalent )

Providing and fixing 600 mm x 450 mm bevelled edge mirrror of superior

glass mounted on 6 mm thick A.C. sheet or ply wood sheet and fixing to wooden 825.48 Each

127 pluge with C.P. brass screws and washers.

Providing and fixing chromium plated brass halftrun flush cock of approved quality

128 including fixing in pipe line etc. complete.

Provdg. & fixing White / Color Vitreous china Counter wash basin with signle

hole for pillar tap of "Cera " - Concord series of 550 x425 mm size to be fiited in

stone counter with necessary brackets painted white incl. cutting holes and 2950 No.

making good the same .Cost Includes P/F C.P. brass waste coupline, 32 mm

dia fisher union ,15 mm dia. Pillar cock & Angle cock of " Ess Ess"- Trend series

129 ,32 mm dia. Waste pipe etc. complete as per dir. of engg. in charge.

Providing and fixing washbasin with single holefor pillar tap with C.I. or M.S. brackets

painted white including sutting holes and making goodthe same but excluding

fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v400mm size. (i) In 1400.18 No

130 white colour.

Providing & Fixing S.S.304 Grade Sink of Nirali / Krishna or Equivalent

Make for Kitchen Platform of size : 24":x18" as per Direction of engg. In 4650 No.

Providing and fixing C.P. brass towel rail comlete with C.P.brass brackets 597.22 Each

132 fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

Providing and fixing 600 mmx120 mm glass shelf with C.P. brass bracket and 561.03 Each

133 guard rail complete mixed to wooden plug with C.P.brass screws.

134 Providing and fixing toilet paper holder. (A) C.P.Brass 414.53 Each

Providing and fixing 12mm dia C.P. bib cock of approved make like jaquar or Essess or

any other type and make specified by the Architect . All pillar cocks, stop cock, angle cock

etc to be Jaquar or EssEss make with quarter turn disc ceramic cartridge and chrome

Providing and fixing screw down bib taps of following size. (B) Brass chromium

136 plated screws down Bib Tap.

(i) 15mm dia. 184.98 Each

(ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of following size. © Gun metal screw

137 down bib tap.

(i) 15mm dia. 157.29 Each

(ii) 20mm dia. 176.09 Each

Providing and fixing pillar tap, capstan head, screw down high pressure with

138 screws, shanks and back nuts.

(i) 15mm dia. 305.67 Each

(ii) 20mm dia. 351.18 Each

139 Providing and fixing Gun metal check or non-return fullway wheel valve.

(i) 15mm dia. 184.98 Each

(ii) 20mm dia. 201.8 Each

(III) 25 MM DIA 416.47 Each

(E) 40mm dia 656.86 Each

Providing and fixing chromium plated brass half trun flush cock of approved

140 quality including fixing in pipe line etc. complete.

(i) 20mm dia. 252.26 Each

(ii) 25mm dia. 261.16 Each

(iii) 32mm dia. 273.03 Each

Providing and fixing Urinal or approved quality including conecting

the Urinal with waste pipe , tap etc.complete. (A) White earthen ware flat 1026.01 Each

141 back or corner type size 430mm x 260mm x 350mm.

Providing and fixing Urinal of approved quality including connection

with trap and with integral longitudinal flush pipe. (A) Squating plate pattern 1535.63 Each

142 white earthen ware 550mm x 300mm.

Providing and fixing chromium plated, bottle trap with necessary couplings of

143 approved quality for wash basin.

Providing and fixing ball cock ofapproved quality as directed. (A) Copper Metal

144 (i) 25mm dia.

Providing and fixing ball cock of approved quality as directed. (B)Abonite (i)

Filling with good Quality thor as and where directed by the Architect /

Engineer-in-charge, in sunk in layers of 15 cm. thickness, including watering, 3850 Cmt

146 ramming well etc. complete, as directed by the Architect / Engineer-in-charge .

Providing laying and jointing in true line and level 15 mm dia. U.P.V.C. Pipe (SCH-

40) for cold water including fittings make PRINCE/ SUPREME/ ASTRAL/

FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre C/C or shall be 71.93 Rmt

concelled as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with solvent, including cost of all

147 materials.adhesive

Providing laying and jointing in true line and level 25 mm dia. U.P.V.C. Pipe (SCH-

40) for cold water including fittings make PRINCE/ SUPREME/ ASTRAL/

FINOLEX orequivalent as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre C/C or shall be 90.93 Rmt

concelled as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 32 mm dia. U.P.V.C. Pipe (SCH-

40) for cold water including fittings make PRINCE/ SUPREME/ ASTRAL/

FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre C/C or shall be 117.97 Rmt

concelled as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 40 mm dia. U.P.V.C. Pipe (SCH-

40) for cold water including fittings make PRINCE/ SUPREME/ ASTRAL/

FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre C/C or shall be 146.65 Rmt

concelled as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost of all

Providing laying and jointing in true line and level 50 mm dia. U.P.V.C. Pipe (SCH-

40) for cold water including fittings make PRINCE/ SUPREME/ ASTRAL/

FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre C/C or shall be 193.73 Rmt

concelled as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost of all

Providing in line level plumb, fabricating and fixing three row horizontal

barbed wire fencing and punched tape concertina coil of 9 turns per meter of

610 mm dia fixed with clips on top of the angle iron posts. The punched tape

concertina coil having sharp barbs at every 25 mm spacing shall be 0.5 mm thick

and 19 mm width and weighting 13 kg/100 mt. (Average) as per manufacture's 390 Rmt

specification. The rate shall also include providing and fixing 1.20 mt.total

long MS angle 40 x 40 x 6 mm @3.00 mt.c/c spacing embaded in RCC column,

angle posts shall be painted with one coats of red oxide and two coats of enamel

151 paint of approved quality at top compound wall.

Fixing sun film for protection sunlight in black or any colour as as directd by engineer

152 In Charge.(Market rate)

Providing & Fixing 3 mm thick F.R.P.sheet of Approved Quality & Color /

Pattern as per Consultant's design also includes required fabrication structure

in the grid of 2'-0x2'-0 size using hollow pipe of16 gauge & size 2"x1" & 1"x1"

,G.I. & Bitumen Washers, Silicon paste application for fixing the sheet . Rate 1930 SqM

also includesnecessary bending, cutting, labor charges , Zinc Primer coat & Two

coats of oil painting of color as approved by consultants & making good the wall.

Providing 2 mm thick F.R.P. Gutter with necessary M.S. Supporting Brackets.

Hiring charges for J.C.B.machine inclduing cost of fuel, operator, dirver etc..

155 ( 12 hours sift day/night) (N.S.)

To provide tractor with hydraulic trolley, driver, 4 Nos. of Labor with all tools like

bucket drum, showels, trikam, pavadas, etc,, to carryout different 1661.02 No.

works during monsoon for 12 Hrs. Shift. Work shall be carried out as per the

156 instrucitons of Engineer In-Charge.No extra charged shall be paid for night shift.

Roller Blind Providing and fixing Roller Blind curtain fixed on window level

on wooden batten and curtain lift with cotton thin rope, make of 3285 Smt

aerolax or equivalent design and colour as per instruction by engineer – in –

157 Charge with necessary hardware fitting, material and labour etc complete.

Providing & Fixing Door closer - Door closers (Heavy type of 765 number) Hardwire or

158 Everite Prabhat or Equivalent

Providing and fixiing M.S. Fan clamps type 1 of 16 mm dia M.S. bar bent to shape

with hooked ends of R.C.C. slabs during laying incl. painting the exposed protion of 124.74 No.

159 loops, all as per standard design complete.

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1

160 including neat cement finishing, watering etc. complete.

161 Making Water connection from exi.Muni. Water line (N.S.) 250 No.

Providing and applying fibere reinforced cementitious micro concrete

work in cellings and beams incl.mixture of CEMSCREED HM

(F) fair mate company material, FBR bonding agent material with water 530 Smt

in suItable proportion anti corrosive treatment on exposed beam,celling steel bars

with safeCore R incl.all kind of labour etc.comp.including three coat of

162 white wash.(Approved Rate)

Providing and Fixing 1 H.P. Electrical monoblock or submarcible water pumps

withmotor and required cable and switch board of approved brand and make 6800 Set

163 etc.comp.as directed.

.Providing TMT Bar FE 415 reinforcement for R.C.C. work including bending, binding

163 a and placing in position complete up to floor two level

ProvidingTMTBarFE500/500Dreinforcement for R.C.C.workincluding bending,binding

and placing in position complete upto floor two level placing in position complete upto 75.46 Kg.

b floor two level placing in position complete upto floor two level

Providing and fixing 30mm thick solid both side prelam PVC door shutter (sintex door- 2867 Smt

164 equivalent) with necessary alluminium fitting with EL-7 section frame

Conveyance charge of Earth,Lime, Murrum, building rubbish earch manure or sludge 235.51 Cu.M.

165 and excavated rock and fly ash,aggregate of any kind etc.comp.upto 5 km lead.(L.S.)

Providing and laying polished granite stone slab 18 mm thick in risers of steps, dedo

and pllars laid on 10 mm thick cement mortar 1:3 (1 cement:3 coarse sand) and 2690 Smt

166 jointed with gray cement slurry including rubbing & polishing etc.complete.

Wall panelling with 12 mm MDF fixed to existing alluminium framing and making

grove as per design and finished with royal plastic paint as per instruction of 1688 Smt

167 engineer incharge. (N.S.)

Providing and laying 15mm bamboza wooden flooring as per architect's

drawing with all necessary details as directed by the project consultants. 2690 Smt

Use underlay for better result as per Detail specifications and directed by the

168 project consultants. (N.S.) (Approved Rate )

Applying two coats of Birla (whitecementbased) or Asian (acryliclapy-

putty) or equivalent & two coats of primer of approved brand and manufacture

on new wall surface to give an even shade including thoroughly brushing the 40.19 Sq.M.

169 surface free from mortar dropping

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to

give an required shape evenshade after thoroughly brushing the surface to remove all 113.4 Sq.M.

170 dirt, and remains of loose powdered materials.etc complete

Providing and fixing flush door shutters, solid core construction with frame

of first class hardwood with cross board and face veneer or plywood face

panels, with both side 1 mm laminate finishing including anodized

aluminum butt hinges with necessary screws. Decorative type and pine

wood core anodized minimum 3 no 150 mm long aluminum butt hinges in flush

door shutters with 2 no of brass holdfast 325 mm long 1 no brass tower bolt 4686.36 Smt

250 mm long and two no of 150 mm long brass door handle . Decorative both

side laminated Flush door 35 mm thick. with frame of 10 cm x 7 cmt Indian

teak wood frame including all necessary fitting fixtures hardware screw and

adhesive etc fixing up to all lead and lift height up to 45 mtr from GL etc

171 complete as per direction of engineer in charge

P/M/F chainlink jali 8'x4' size as per details sketch & instructionof engineer in charge

same as lal darwaja garden pattern consisting of 3'dia. M.S black pipe 'A' class 5'4"

ht. fixed at 8'9" c/c in C.C 1:2:4 block of 9"x9"x9" size chain link jali of size 2"x2"x10

gauge fixed in 35x35x5 mm MS angle frame 8'x4' size with MS flat of size 25x3 mm 1230 Rmt

welded jali etc.comp.The jali is to be welded to MS pipe with MS flat as instruction

given.The M.S pipe and the M.S angle frame are to be painted one coat of primer and

172 two coats of paint as directed in line and level. (N.S)

Providing & Fixing masonary wall with porbandar lachiya stone with well dressed

grooveas per directed by engg.in charge for foundation, plinth or super structure level

(above plinth level upto floor two level) in cement mortar 1:5 (1-cement : 5-fine sand)

incl.pointing the joint with white cement and yellow oxide powder in proportion to

match stone colour the joints should be thread grooved as per exi. lake stone pitching

(A) stone masonary wall/stone dressed single faced (size 15"x8"x9") 8990 Cmt

(B) stone coping (size 15"x8"x4") 510 Rmt

(C) stone coping (size 15"x8"x9") 790 Rmt

(D) stone column (size 15"x15") 10710 Cmt

(E) stone column top (size 20"x20"x9") 685 No.

Supplying and fixing of 300 mm-L x 15 mm-B x 380 mm-H Kerb block for

Footpath in M-20 grade using 20 mm nominal size black trap aggregate of

Sevaliya/Timbaor equivalent quality for pre-cast blocks,

reasonablyexposed finish/ formwork , mould with well

equippedwith vibratory system for kerb stones of approved design including

curing, etc. complete, including thecost of formwork etc. complete. The rate

shall also include necessary cutting of asphalt, fixing the Kerbstones in 393 Rmt

line and level on 5 cm thick sand bedding withnecessary equipments

and materials. The rate shall also include the flush pointing in CM (1:3) for all

joints of thekerbstones. Filling of zari alone the sides of the kerbstone fixed with

Bituminous concrete Bituminousconcrete / C.C. mixed in proper position to

flush withthe road surface as directed by Engineer in change to form a

174 portable mixture.a) Laying on 5 cm thick Sand Bedding

Providing and Laying of Rubber Moulded Paver Block Grey/Coloured 60 mm thick, M-

35 Grade of any size shape (Usually Uni-Paver Blocks) using black trap good quality

aggragate of 20 mm nominal size for footpath,parking areas, service lanes and other

areas as mentioned in the drawing / instruction of engineer in charge. Cost includes

formworks using rubber mould, Rate providing and laying paver blocks as per

required grading and specification. The paver block shall be mechanically compacted.

The work of paving blocks shall be executed in line and level by skill mason of 429 Smt

flooring work only. It should be laid in such a way that the no cutting of the paver

block to be necessary. if cutting of paver block necessary then it should be cut by

machine only and carting. The finished surface of the paver block shall have

resonably good, plain finished. Paver blocks shall be compacted and shall be relaid if

necessary. Gravel or such type of materials shall not be allowed for production.

175 Laying on 5 cms thick sand

Provoding and fixing flush door shutters, solid core construction with frame of first

class hard wood with cross board and face veneer or ply wood face panels, including

anodised alluminium butt hinges with necessary screws. (B) Non- decorative type and 1779.97 Smt

block board core anodised alluminium butt hinges in flush door shutters (2) 35 mm

thick. Labour work for fixing any kind of paving with cement pointing in CM 1:2,

176 including watering, ramming etc comp. as dir.For pavement

I) Laying on Sand bedding as per requirement to fix the C.C.Block / Nibhada Stone in

177 Line & Level

Box type metal letters forming composite box made from 1mm thick stainless steel

plate of grade 304 having brush finish of following font size to be fixed at Main Gate in

english and or Gujrati and including fixing charges approved before fixing by clent /

178 consultant.

A 400mm high 1000 Nos.

B 300 mm high 750 Nos.

C 230 mm high 565 Nos.

Providing and fixing false ceiling at all height including providing and fixing of frame

work made of special sections, power pressed from M.S. sheets and galvanized with

zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of

angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at

1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm

dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers

of 25x10x0.50 mm of required length with nuts & bolts of required size and other end

of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick

bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm,

at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. 850 Smt

intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long

G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm

high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to

wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall

screws @ 230 mm interval, including fixing of gypsum board to ceiling section and

perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c,

including jointing and finishing to a flush finish of tapered and square edges of the

board with recomme-nded jointing compound , jointing tapes , finishing with jointing

compound in 3 layers covering upto 150 mm on both sides of joint and two coats of

primer suitable for board, all as per manufacturer’s specification and also including

the cost of making openings for light fittings, grills, diffusers, cutouts made with frame

of perimeter channels suitably fixed, all complete as per drawings, specification and

179 direction of the Engineer in Charge but excluding the cost of painting.

Providing & Fixing SPEED BUMP - #2 No (1 black, 1 yellow) 350 x 500 x 50 mm, Size

per color End Cape 350 MM x 175 MM x 50 MM TOP DESIGN - Lining Top flat ANTI

SKID PATTERN FOR GRIP COLOUR :- YELLOW & BLACK BODY MATERIAL :-

MODIFIED THERMOPLASTICS (Polymer Rubberized ) • ECO FRIENDLY 2185 Rmt.

RECYCLE RUBBER Packing :- 4 pcs/ woven Bag Load Capacity :- 20 MT Fitting (

Fixing on TRAKE) :-4 holes & END CAPE :- 2 HOLE HEX Bolts with Washer Epoxy

180 for Bolt Fitting etc. complete as directed by EIC .

Providing and fixing of Roller blind curtain/blackout. The fabric shall be woven from

formulated platisol extruded over a polyaster yarn.The fabric shouldl be weaved to 2610 Smt

provide subtle view of the side of the blind and should offer elimination of glare and

181 sunlight radiance upto a minimum of 80%.The fabric shall be flame retardant.

Providing and fixing PVC/Gpsysum plain colour false ceiling with grid type with

aluminium frame from gypsteel, fastners ,props, Finishing as per architectural

drawing allowing openings for A.C. Diffusers, Light/Electrical Points etc 933 Smt

–complete, Prior to fixing on frame.(Brand : Anutone or equivalent )

182 (N.S.) or as directd by engineer In Charge.

Provdg. & laying S.W. Gully trap with brick masonry chamber & water tight G.T.Stone 1263.15 No.

183 including fixing of covervSquare mouth trap 100 mm x100 mm size P-Trap

Providing cement vata (10cmx10cmsize) quarter roundin cement mortar 1:1 including

184 neat cement finishing, waterin getc. complete.

Providing and laying (to level or slopes) and jointing with stiff mixture of Cement

Mortar in proportion 1:1 Salt glazed stoneware pipes including testing of pipes and 211.05 Rmt.

185 joints complete.(A) 100mm dia.

Providing and laying (to level or slopes) and jointing with stiff mixture of Cement

Mortar in proportion 1:1 Salt glazed stoneware pipes including testing of pipes and 288.23 Rmt.

186 joints complete.(B) 150mm dia.

Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone 2903.89 Each

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep

187 for single pipe line.

Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone 3624.51 Each

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(i)Inside dimensions 500mm x 700 mm and 450mm deep

188 for pipe line with one or two inlets.

Providing, supplying and fixing precast C.C. blocks (M-20) edge kerb having size of

75 x 300 x 300 mm depth and as per design conveying it to the site, jointing into C:M

1:3 and racking out the joints incl. necessary excavation of asphalt, soil 219 Rmt.

189 etc..completed.

Constructing a cooking Sandwich platform 60 cm. width and 70 cm high resting on

B.B.Masonry walls 23 cm.thick in C.M.(1:6) with (ii) Fixing black Granitee 30mm thick

laid on precast R.C.C. (1:2:4) slab with plastering on exposed faces of wall in C.M. 754.95 Rmt.

190 (1:4) etc complete

Providing and fixing hard drawn steel wire fabric 75mm x 25mm mesh or weight not

less than 7.75 kg. per Sq.M. to window frames etc. including60 x 20mm beading of 754.65 Smt

Providing & fixing 15 cm wide chicken mesh jali with nails & then application of

192 mm plaster on R.C.C.& masonary joints as per dir.of engg.in charge

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-

graded stone aggregate 20mm nominal size) laid in one layer and finished with a 348.08 Smt.

193 floating coat of neat cement. (A) 50mm thick.

Providing and constructing, Underground (U/G) water tank of specified capacity,

on specified location, for all depths, in controlled CC of M-200 grade with bottom

slab, top slab and RCC walls, including cost of form work and reinforcement,with

inside and outside plaster in CM 1 :3 and water proofing treatment as per IWP

specification,including injection, grouting, etc. complete. The rate includes for

providing and fixing two nos. 0.6m. x 0.6 m. size medium duty CI manhole cover/s

194 at top, including wash out pipe line and inlet and outlet connections etc. complete.

Providing and fixing PVC Printed pain colour false ceiling with grid type with

alluminium frame consisting of 600mm x 600mm 3mm thick plain PVC sheet used

as panel insert in a frame work made using anodized alluminium T section of size

x 1 (235 x 25mm, 19 gauge or 1 mm thick) in square pattern of grid sizes of 2 x

(600 x 600mm) The alluminium frame work is supported from the cceiling with the

help of G.I. hook and G.I. wire/6mm M.S. rods of required sizes to maintain proper

level etc. The aluminium frame work is supported on side wall with the use of

alluminium L section of size 1 x1 (25 x 25mm) angles etc. complete as per direction

195 of Engineer in charge. Manufactures specification and drawing.

Providing and supplying of labour for necessary manual excavation, cleaning,

Shifting of Material Or any other, or for any other work as directed by Engineer In 551 No

196 charge. The Rate includes Handcart with Mazdoor

A Mukadam/supervisior/karigar 425 No

B Fitter/Plumber/Mason 697 No

C WELDER/ Gas cutter at Day /night 689 No

Supplting of welding machine / gas cutter including cost of welding rods/gas,

D Transportation, including carting from site to work place.

E Mazdoor at Day Female 450 No's

E Mazdoor at Day Male 493 No's

Supplying electric breaker machine for RCC slab or asphalt demolishing work on

site by using operator, fuel, power supply etc.complete as directed. (no payment

should be allowed for non working condition of machinery and for pipe line 1071.42 Shift

excavation and M.H. work. Allowed only for break down work) (Based on

197 Previously approved rate by CE sir )

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5)

PIPE having National Sanitation Foundation (NSF) seal for potable water of

following dia. Nominal bore tube fittings and clamps including making good the

198 wall, ceiling and floor etc. complete.

A 15 MM DIA 165.21 Rmt

B 20 MM DIA 202.97 Rmt

C 25 MM DIA 247.25 Rmt

D 32 MM DIA 330.36 Rmt

E 40 MM DIA 437.66 Rmt

199 50 MM DIA 647.3 Rmt

Supplying and fixing C.I. cover 300mm x 300mm without frame for Gulley trap

200 (Standard pattern) te weight of cover to be not less 4.53 Kg.)

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2 working pressure

polythene pipes of the following out side Dia. Low densidy, complete

with special falnge compression type fittings, wall clips etc. including

201 making good the wall ceiling and floor.

(F) 75mm 274.68 Rmt

(G)110 mm 332.91 Rmt

Filling available excavated earth(excluding rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding 20 cm. in depth consolidating each 129.1 cumt

202 disposited layer by ramming and watering.

Filling in plinth with sand under floors including watering ramming, consolidating

203 and dressing complete

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. 286.2 cumt

204 thickness including watering, ramming and consolidating etc. complete

Filling in Sunken Portion with good Quality Aerated light weight concrete block

having crushing strength not less than 35 kg/sqcm and where directed by the 4559.61 cumt

Architect / Engineer-incharge, in sunk in layer. including watering, ramming where

205 it is required etc. complete, as directed by the Architect / Engineer-in-charge .

Providing and applying fibre reinforced elastomeric liquid water proofing

membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of

on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-

priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1)

and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of

complete application/system not less than 500 microns).

The operation shall be carried out after scrapping and properly cleaning the

surface to remove loose particles with wire brushes, complete in all respect as per

206 the direction of Engineer-in- Charge.

Providing and laying integral cement based water proofing treatment including

preparation of surface as required for treatment of roofs, balconies, terraces etc 1150.48 sq mt

207 consisting of following operations:

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed

with water proofing compound conforming to IS. 2645 and approved by Engineer-

in-charge over the RCC slab including adjoining walls upto 300 mm height

including cleaning the surface before treatment.

(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm

size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with

water proofing compound conforming to IS : 2645 and approved by Engineer-in-

charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse

sand ) admixed with water proofing compound conforming to IS : 2645 and

approved by Engineer-in-charge to required slope and treating similarly the

adjoining walls upto 300 mm height including rounding of junctions of walls and

(c) After two days of proper curing applying a second coat of cement slurry using

2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS

: 2645 and approved by Engineerin- charge.

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1

cement :4 coarse sand) admixed with water proofing compound conforming to IS :

2645 and approved by Engineerin- charge

(e) The whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curing and for final test.“All above operations to be done

in order and as directed and specified by the Engineer-in-Charge :and shall be

guaranteed for minimum period of 10 years after handing over the completed

building by the main contractor to be finished as directed. Stamp

paper guarantee 10 years to be furnished before receiving any payment from the

With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

208 PROVIDING AND FIXING GYPSUM CELLING 90 SFT

PROVIDING AND FIXING FLUSH DOOR FINISH WITH LAMINATE OR VINEAR RATE INCLUSIVE WITH

ALL HARDWARE ,LABOUR 1050 SFT

209 ETC AS PER SELECTION.

PROVIDING AND FIXING LOW HEIGHT STORAGE MADE WITH 18MM,12MM,8MM PLYWOOD

FINISH WITH LAMINATE INSIDE FINISH WITH 0.8MM LAMINATE RATE INCLUSIVE WITH ALL

HARDWARE, LABOUR ETC AS PER 1850 SFT

PROVIDING AND FIXING FULL HEIGHT AND OVER HEAD STORAGE MADE WITH 18MM,12MM,8MM

PLYWOOD FINISH WITH LAMINATE INSIDE FINISH WITH 0.8MM LAMINATE RATE INCLUSIVE WITH 1500 SFT

211 ALL HARDWARE, LABOUR ETC AS PER DESIGN.

PROVIDING AND FIXING PARTITION MADE WITH ALLUMINIUM FRAMING BOTH SIDE FINISH WITH

212 PLYWOOD AND PLY FINISH WITH 1MM LAMINATE AS PER SELECTION

PROVIDING AND FIXING TABLE WITH SIDE PART AND FRONT MODESTY 4'3"' X2' MADE WITH

18MM, 12MM, 8MM PLYWOOD FINISH WITH 1MM LAMINATE OUTSIDE AND 0.8MM LAMINATE

INSIDE AS PER INSTRUCTION OF 11500 NOS

213 ENG INCHARGE

PROVIDING AND FIXING TABLE MADE WITH 18MM, 12MM, 8MM PLYWOOD FINISH WITH 1MM 1250 RFT

214 LAMINATE OUTSIDE AND 0.8MM LAMINATE INSIDE AS PER INSTRUCTION OF ENG INCHARGE

PROVIDING AND FIXING TABLE 5' X2' MADE WITH 18MM, 12MM, 8MM PLYWOOD FINISH WITH 5850 NOS

215 1MM LAMINATE OUTSIDE AND 0.8MM LAMINATE INSIDE AS PER INSTRUCTION OF ENG INCHARGE

216 PROVIDING AND FIXING LAW BACK CHAIR AS OER SELECTION

217 PROVIDING AND FIXING MEDIUM BACK CHAIR AS OER SELECTION 7500 NOS

218 PROVIDING AND FIXING ROLLER BLIND AS PER SELECTION 250 SFT

219 PROVIDING AND FIXING 2MM PVC FLOORING AS PER SELECTION 120 SFT

220 PROVIDING AND FIXING WALL COLOUR 30 SFT

221 PROVIDING AND FIXING 2 SEATER SOFA AS PER SELECTION 35000 NOS

222 PROVIDING AND FIXING MDF PANNELING FIXING 12MM MDF RATE 295 SFT

223 PROVIDING AND FIXING TABLE MADE WITH 18MM, 12MM, 8MM PLYWOOD FINISH 16500 NOS

224 PROVIDING AND FIXING POP PUNNING 32 SFT

MS work : Providing, AND FIXING 2assembling,

fabricating, SEATER SOFA hoisting/

AS PER SELECTION

erecting and fixing in 35000 NOS

position at all heights/ all levels/ all floors/ all shapes & sizes with all leads & lifts

using MS Rolled Steel Sections, Hollow sections, Tubular Sections, MS Plates,

Chequered Plates, MS Pipes, Perforated Sheet, Flats, Bright Bars, Angles, MS

Sheet, Girder, Beam, cattle trap. eep threaded MS bolts, threaded J bolts,

insert plate, support plate etc as per drawing. all confirming to latest relevant IS

codes for the work of steel structures like staircases, ilings, handrail, jali, gates,

grills, bracings, platforms, brackets, monkey ladder, cattle trap, windows, pipe

rack, rungs, false ceiling frame work, Roof canopy, fencing posts, M.S. Screen &

fencing jali frame work etc. including straightening, cutting, bending, bolting

and welding the members all as per structural drawings and as per detailed

specifications (for materials &workmanship) including necessary

scaffolding/ staging etc. complete in the situations described hereinafter

and comprising of : 1) Profile Cutting of components to required length/ 128.29 Kg

width and shape/ profile; 2) Smooth grinding/ machining of edges/ faces/ all

welding joints; 3) Necessary welding (electric arc welding) for required weld

lengths and sizes. 4) Machine drilling of holes for joining/ anchoring (Standard

measurements will be paid for as actual cut length used at site) The rate shall

include dry sanding, degreasing (wet cleaning) & preparation of rustfree surface

manually or mechanically, metal putty to make the surface even and smooth,

coat zinc chromate yellow oxide primer and 2 coat of enamel paint of approved

shade of paint over all the surfaces of the steel sections or as specified in the

drawing. 5)including all Cutting of mild steel/ structural steel plate with CNC

plasma/ water jet/ laser cut / Friction Sawing cutting of custom design shape as

per drawing and instruction of the architect up to any thickness. Note:

226 Sample as per drawing shall be get approved from the consultants before

Providing & making Gabion structure with Mechanically Woven Double Twisted

Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH

Clause 2500,of required size, Mesh Type 10x12(D=100 mm with tolerance of ±

2%) Zinic+PVCcoated, Mesh wire diameter2.7/3.7mm, mechanically

227 edged/selvedged with partitions at every 1m interval and shall have minimum

10 numbers of openings per meter of mesh perpendicular to twist,

tying with lacing wire of diameter 2.2/3.2mm(ID/OD), supplied @3% by weight of

Gabion boxes, filled with boulders with least dimension of

mm, as per drawing, all complete as per directions of Engineer-incharge

228 Supplying and stacking of hard stone (for stone pitching) 966.1 Cmt

22.5 cm thick at site.

Dry stone pitching 22.5 cm thick laid in courses and required profile with

hammer dressed stones having no side less than 15 cm, with minimum depth

of 20 cm including preparing the bedding surface etc. all complete. (Payment for

229 Stone to be made separately).

Labour charges for dry stone pitching of 22.5 cm. thick including preparing the 307.13 Smt

230 surface etc complete.

Providing and supplying,and jointing ISI mark only standard length

stoneware pipes of following class and diameter including excavation for

laying of pipes, insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to departmental stores,

stacking etc. compl. (IS651/1989 or its latest revision) including labour work for

lowering, laying, joiting with cement mortar (1:1) proportion, proper postion,

231 grade and alignment and all level as directed by

engineer in charge including store to site of work jointing material etc complete.

100 mm dia 165.52 Rmt

150 mm dia 242.98 Rmt

230 mm dia 400.54 Rmt

R. C. C. PIPE (Vertical Cast) Providing and supplying ISI Standard R.C.C. pipes in

standard lengths of following class and diameter suitable for either collar

joints or rubber ring joints including all taxes, insurance, transportation,

freight charges, octroi, inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc Note : One collar should be supplied with each

full length plain ended RCC pipe, cost included in rates below. One rubber ring

should be supplied with each full length socketed pipe, cost included in rates

Class NP3 Test Pressure 0.7 Kg/sq.cm

450 mm 1433 Rmt

600 mm 2049 Rmt

900 mm 3790 Rmt

1000 mm 5076 Rmt

1200 mm 6207 Rmt

1400 mm 7982 Rmt

Lowering, laying and jointing R. C. C. pipes of following diameters in proper

position, grade and alignment at all level as directed by Engineer-in-charge

including conveyance from stores to site of work, labour, giving hydraulic testing

233 as per ISI code.

Class NP2,NP3,NP4

1000 mm 375 Rmt

1200 mm 440 Rmt

1400 mm 514 Rmt

Providing and laying rubble soling of required thickness, under trenches,

pits,foundations etc. including hand packing, laying in proper grade,

spreading, filling the interstices with sand/quarry dust/grit including watering,

234 consolidation by rolling/ compacting mechanically with 3-

5 ton compactor etc complete as per drawings,specifications and

as directed by EIC.

Providing & Supplying JCB Machine on rental basis in case of emergency situation

and break down type work & also during unavoidable condition as per

instruction of engg. in charge, rate includes all nece. shifting, fuel and operating 600 Hour

charges and stacking of useful & non-useful materials separately up to store.

(No payment should be allowed for non working condition of machinery and for

235 pipe line excavation and laying work)

Supplying Pneumatic Breaker Machine for RCC Slab or Asphalt Demolishing Work

on site by using Operator, fuel, power Supply etc. Complete as Directed. (No 600 HR.

payment should be allowed for non working condition of machinery and for pipe

line excavation and M.H. work. Allowed only for break down work)

Providing & Supplying Hitachi Machine-110 capacity on rental basis in case of

emergency situation and break down type work & also during unavoidable

condition as per instruction of engg. in charge, rate includes all nece. shifting, fuel 2000 HR.

and operating charges . (No payment should be allowed for non working

236 condition of machinery)

Providing & Supplying Hitachi Machine-200 capacity on rental basis in case of

emergency situation and break down type work & also during unavoidable

condition as per instruction of engg.incharge , rate includes all nece. shifting, fuel 2700 HR.

and operating charges. (No payment should be allowed for non working condition

Providing & Supplying hydra carne Machine of 12 tone capacity on rental basis in

case of emergency situation and break down type work & also during

unavoidable condition as per instruction of engg. in charge, rate includes all

nece. shifting, fuel and operating charges. (No payment should be allowed for

237 non working condition of machinery)

Constructing Chamber of following size including excavation, refilling,

BBCC (1:5:10) for foundation, C.C.Channel (1:2:4), finished 15 mm thick cement

plaster inside in CM 1:3, finishing with cement slurry, Brick masonary in CM

238 1:5 & excluding the cost of chamber seat cover etc.completed.

a 0.60 X 0.45 mt. size Inside Clear, Depth from 0.0 to 0.90 meter 2261.61 No.

b 0.60 X 0.75 mt. size Inside Clear, Depth from 0.0 to 0.90 meter. 2874.11 No.

c 0.75 X 0.75 mt. size (Inside Clear) Depth from 0.0 to 1.20 meter. 3905.36 No.

Providing and applying approved coloured chips 20mm thick STONE CREAT

PLASTER for exterior / interior side on wall up to full height from ground level

consisting of 12mm thick backing coat of CM 1:3 (1 cement : 3 Bodeli sand) and

8mm thick finishing coat of CM 1:1 (1 cement (Grey / White / Colour : 1 stone grit

(approved coloured chips)) including providing & 667.78 Smt

fixing 300mm wide strip of chicken net at vertical and horizontal joints of RCC and

masonary including 10mm alluminium

channel for expantion joint / grooves, curing, necessary scaffolding in true line and

239 level etc. complete as directed by EIC.

Providing and applying 2mm thick Texture Plaster Terre Palette incorporating fine

filaments made of polymer and aggregating natural stone powder with making grooves

on existing base coat of smooth mala plaster etc. Complete Colour and shade as

240 approved by Architect/ Engineer in charge for all floor all height ."

241 ACP CLADDING - Provding and fixing 6mm thick AHPL 4392.77 Smt.

Providing and fixing clay material and stone poweder cladding with 5 mm to

mm thick clay sheet of size 600 X 1200 with any shape cladding with using requre

PU, Cement, Polymer based adhesives with all accessories, material & labor 4330.9 Sqm

complete as directed by Architect / Engineer – in – charge. Providing and fixxing of

242 M.C.M. Cladding as approved by Architect.

Providing and fixing 18mm thick polished Granite of approved quality for

door,window sill,jems and lintel bottom, staircase steps, entrance, dedo, shelves,

flooring, urinal partition, lift (lift door jamb and lift door landing side faica area till

ceiling) etc. with machine cut edges as required and laid in desired pattern fixed 3844 Smt

as per item above. The rate to include edge moulding and mirror polish of all

exposed surface etc.

Providing and fixing Granite sand which type platform including supplying and

fixing granite stone 18 mm thick mirror polished 1st quality Granite stones in top

and side posiition and vertical strip at front over 25 mm thick polished kotah

stone platform fixing in top and sides and itermediates supports fixing with

cement mortar and adhesivee and finishing including providing cutting of kitchen

sink (as directed) 600 mm x 450 mm x 200 mm size stainless steel sink (as directed

244 by engineer incharge) at required position etc complete.

Providing and laying broken chine mosaic flooring for terrace using 12 mm to

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto surface using white

cement including rounding off junctions and extending them upto 15 cm along the

245 wall,clearing with water and oxalic acid etc. as directed

Providing and laying Paver Cobel Granite Stones (100 mm x 100 mm x 50mm) over

1:3 cement mortar (1 cement : 3 graded medium coarse sand) bedding of average

1” thickness, floated with thick and neat cement paste with consumption of

cement @ 4.4kg/ sqm and 2 kg /sqm for joints mixed with approved pigment to 3415.5 Smt

match the shade of the stone including dressing, rubbing, curing, cleaning etc.

complete at all levels and heights. (The rate shall be for the patterns and details

provided by the Architect. If required, residues will be provided and no extra

246 amount will be paid for residues to be used to achieve the pattern).

Providing and Laying and fixing 50mm thick expansion joint by hydro cell semi rigid

UV resistance with high performance laminated closed

cell polythene form joint filler in sheet foam joint filler in sheat foam as directed

Extra for providing mechanical devise chain and crank operation for operating

248 rolling shutter.

Providing and fixing window having extruded aluminum Colour anodized section

frame main outer size 63.50 x 38.10 x 1.95 mm,@ Wt

1.094 Kg / Rmt, horizontal two track member size 61.85 mm x 31.75 mm x

1.20mm @ wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x 31.75mm x

1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of horizontal member size 1969.73 Smt

40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of size 40mm x

18mm x 1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing to frame as per details etc

249 complete for window.

Providing and fixing stainless steel (Grade 304) for railing, Expansion joint covering

etc. made of Hollow tubes, channels, plates, pipes etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and fitting the same

with necessary stainless steel nuts and bolts complete, i/c fixing the railing with

necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of

required size, on the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-in-charge, (for payment purpose only

weight of stainless steel members shall be considered excluding fixing accessories

250 such as nuts, bolts, fasteners etc).

Providing, Supplying and fixing in position Stainless steel finished stair railing

dasho with brush finish and 304 grade as per Indian Standerd and detail drawing 1365 Rmt

including grinding, cleaning and filling the welded spot with SS finish as per

251 architect’s drawing . (Only stadard measurement will be paid)

Structural steel work (Confirming to IS 4923-1997) riveted, bolted or welded in

builtup for all type sections, in framed work, including cutting, hoisting, fixing in

position and applying a priming coat of approved steel primer all complete as per

the structural designs and directions of Engineer in charge or as per drawing Rate

252 including two or more coats of synthetic enamel paint over a primer.

Health faucet - Providing & fixing of Hand Jet Shower (Health Faucet) with 1mtr

253 Flexible PVC Tube, wall hook, and 2-Way Bib Cock.

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to

wooden plugs with C.P. brass scews.(B) 600mm x 20mm 597.22 No.

Providing & Fixing S.S type soap dish of approved by consultant/Architect,

255 including civil cutting & backfilling as well as making good the walls.

Providing and fixing concealed center point to wall, column, ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable 647.3 Rmt

water of following dia. nominal bore tube fittings and clamps including making

256 good the wall, ceiling and floor etc. complete. [A] 50 mm.

Providing and fixing concealed center point to wall, column, ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable 437.66 Rmt

water of following dia. nominal bore tube fittings and clamps including making

257 good the wall, ceiling and floor etc. complete. [B] 40 mm.

Providing and fixing concealed center point to wall, column, ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable 247.25 Rmt

water of following dia. nominal bore tube fittings and clamps including making

258 good the wall, ceiling and floor etc. complete. [C] 25 mm.

Providing and fixing concealed center point to wall, column, ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable 165.21 Rmt

water of following dia. nominal bore tube fittings and clamps including making

259 good the wall, ceiling and floor etc. complete. [D] 15 mm.

Providing & fixing rigid P.V.C. pipes, Prince, Supreme of approved equivalent make

(10 kg/cm2) with necessary SWR fittings, coupler, bends, tees and fixed to walls/ 588.05 Rmt

columns with PVC clamps with all neccessary specials standard fittings joints to be

260 filled with approved solution. a) 100 mm dia

Providing & fixing rigid P.V.C. pipes, Prince, Supreme of approved equivalent make

(10 kg/cm2) with necessary SWR fittings, coupler, bends, tees and fixed to walls/ 356.21 Rmt

columns with PVC clamps with all neccessary specials standard fittings joints to be

261 filled with approved solution. b) 75 mm. Dia.

Providing and fixing heavy gunmetal sluice valve of approved make (Zoloto or

equivalent make ) and quality approved by Architect. 1730.44 No.

262 a) 50 mm dia.

Providing and fixing heavy duty Gunmetal check or nonreturn full wheel valve of

approved make (Zoloto or equivalent make) and quality 847 No.

263 approved by Architect. a) 50 mm dia.

Providing and fixing in position PVC Ventilating cowl to pipes. a) 110 mm dia. PVC

Providing and fixing in position PVC Ventilating cowl to pipes. b) 75 mm dia. PVC

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter with

jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including the cost of

266 cutting and making good the walls.

Providing and fixing 2 Nos. support arms and backrest to mount at fixed height

(Commander or equivalent) for handicap toilet complete as 16108.05 Each

267 recommended by the E-I-C.

Providing and fixing raised toilet seat with cover for handicap toilet (Commander

268 or equivalent) as recommended by the E-I-C.

Providing & fixing White/Light Coloured Vitreous China Large Urinal 590mm x

375mm x 390mm as per product detail with Flushing

System as per product detail, with C.I. hangers, Bottle Trap, Prassmatics angular 4572.83 Each

cock, Waste Coupling, including cutting and making good the walls and floors

269 wherever required.

Providing & fixing UPVC Half Turn Handle valve of Prince or equivalent make as

270 per direction of EIC. (a) 15 mm dia

Providing & fixing UPVC Half Turn Handle valve of Prince or equivalent make as

271 per direction of EIC. (b) 20 mm dia

Providing & fixing UPVC Half Turn Handle valve of Prince or equivalent make as

272 per direction of EIC. (c) 25 mm dia

Providing & fixing UPVC Half Turn Handle valve of Prince or equivalent make as

273 per direction of EIC. (d) 40 mm dia.

Providing & fixing UPVC Half Turn Handle valve of Prince or equivalent make as

274 per direction of EIC. (e) 50 mm dia.

Providing and fixing Heavy duty FRC (ferro reinforced concrete) Manhole cover of

600 dia of Alcok or approved equivalent make C.I. 2485.35 Each

275 frame fixed with cement mortar etc complete heavyduty.

Providing and fixing Heavy duty Chamber seat cover (FRC) cover 706 x 556 x

mm rectangular cover frame size 600 x 450 mm clear 953.93 Each

276 opening outer size 816 x 666 x 100 mm

Making connection to the existing M.H. in running sewer of following dia. Pipes, at

any convenient time when M.H. is found empty. All 750 No.

277 damaged work shall be well repaired as per inst. Etc. complete