COMPREHENSIVE REPAIR TO OTM ACCN IN CORPS AND MECH BDE UNDER THE AREA OF AGE B/R-II OF GE (ARMY) NO.1 JODHPUR.

Amount

Demolition of Cement concerte in ground floor and paving n exc 15 cm thickness below or above ground level, complete all as specified & directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified & directed.

Taking down Chowkhat or frame with shutter (without taking out shutter from frame) of area not exc 1.5 sqm each , complete all as specified & directed.

Taking down Chowkhat or frame with shutter (without taking out shutter from frame) of area exc 1.5sqm but not exc. 4 Sqm each, complete all as specified & directed.

Taking down shutter of any description area exc 1 Sqm but n. exc 2 Sqm each , complete all as specified & directed.

Taking down shutter & resecuring and refixing in same position of any description area exc 1 Sqm but n. exc 2 Sqm each , complete all as specified & directed.

Taking down steel windows/ventilator with frame of any description and any size, complete all as specified & directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawings, complete all as specified & directed.

S&F factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified & directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, complete all as specified & directed.

S&F 2nd class hard wood plain framed panelled shutter 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board upto commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated (Factory made shutters), complete all as specified & directed.

S&F 2nd class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc divided into squares by Rails and styles , with plain chamfered or rounded mitered and rebated size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) , complete all as specified & directed.

S&F of 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,one face is covered with decorative face veneer with lipping/frame to match, complete all as specified & directed.

S&F in replacement of 12 mm thick toughened glass as in door/window or partition complete including design etching work /sun control film as directed and all necessary stainless steel fittings arrangement like hinges, clips, handle etc., complete all as specified & directed.

S&F of steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, with or without coolar opening, as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded, complete all as specified & directed. Note:- Glass panes, grill and wire-mesh jali shall be measured & paid seperately.

All as per item no. 15.00 but here-in-above, but without glazing bars, complete all as specified & directed.

S&F Steel ventilator with top hung shutters with glazed bars including hinges steel peg stay etc., complete all as specified & directed.

S&F of framed work as in guard bars, grills, gratings and similar work confirming to FE 290, Gde-E-165 Etc., complete all as specified & directed.

S&F galvanised steel wire cloth 0.56mmm nominal dia of wire and average width of aperature 1.18mm, complete all as specified & directed.

S&F 100mm size SS butt hinges (ISI Marked) , complete all as specified & directed.

S&F 100mm size MS butt hinges medium weight (ISI Marked), rolled mild steel, complete all as specified & directed.

S & F for 100mm long, mild steel single action spring hinge, complete all as specified & directed.

S&F Aluminium alloy, anodized, sliding door bolt (ISI Marked) of 300mm with hasp & staple (Bolt type) and fixing clips of sheets, coat or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy , complete all as specified & directed.

S&F 200mm alluminium, anodized, barrel tower bolts extruded section & fixed, complete all as specified & directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type anodized, complete all as specified & directed.

S&F in replacement of Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg Aluminium (extruded section) body, complete all as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads n exc 0.5 Sqm each, complete all as specified & directed.

S & F of 5.5 mm thick Sheet glass, ordinary quality and glazing with Aluminium Beading (including rubber if required) in square exc 0.5 sq m in each pane, complete all as specified & directed.

S&F Sheet glass 5.5mm thick, ordinary quality and glazing with oil putty/wooden beading in square not exc 0.5 sq. m in each pane, complete all as specified & directed.

S&F Figured glass 3mm thick, pin head type and glazing with oil putty or wooden beading in squares not exc 0.5 sq. m in each pane, complete all as specified & directed.

Taking down existing aluminium door shutters from carefully replacement of Rubbers Bushes, washers including greasing and oiling complete and refixing the door shutters in to the same openings and making complete functioning of aluminium door of any size, complete all as specified & directed.

S & F for powder coated anodized Aluminium Frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified & directed.

S & F for powder coated anodized aluminium door shutters, aluminium section weighing 0.55Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door hinges, anodised aluminium snap beading screws etc., complete all as specified & directed.

S &F for powder coated anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluninium fittings such as peg stays 150mm long (1 No) hinges type B-21 100 mm long (2 No) suitable handle (1 No) in each shutter, complete all as specified & directed.

S&F in replacement of Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty & fixed, complete all as specified & directed.

S&F in replacement mortice latch with two loovers (Vertical type) mild steel body 100mm long and fixed, complete all as specified & directed.

M&L for 25mm thick cement concrete type B-0 1:2:4 (using 15mm graded crushed stone aggregate) complete all as specified and as directed.

M&L for 75mm thick cement concrete type B-1 1:4:8 (using 20mm graded crushed stone aggregate) as in sub base complete all as specified and as directed.

Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

S&F machine made precast cement concrete curb stone blocks using cement concrete 1:2:4 type B1 (20mm graded agg), complete all as specified & directed.

M&L for precast cement concrete laquer coated tiles 30cmx30cmx25-30mm thick machine pressed set jointd and pointed in neat cement slurry in floor all as specified and directed by Engr-in-charge.

M&L for 50mm thick PCC 1:3:6 type C1 using ( 20mm graded agg) as in plinth protection finished complete including forming joints in 2 Mtr intervals and filled with butumen mastic, complete all as specified & directed.

M&L for coloured Glazed ceramic tiles in vertical surface 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including M&L 10 mm thick rendering of mortar in CM 1:4 for screed bed, complete all as specified & directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.06sq m but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including M&L 15 mm thick screed bed in CM 1:6 to match complete all as spcified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including M&L 15 mm thick screed bed in CM 1:6 to match complete all as spcified and directed.

All as per item no. 45.00 but here-in-above as in skirting over & including M&L 10 mm rendering in CM 1:4 complete all as specified and directed.

M & L Vitrified Coloured tiles (light shed) as existing 10 mm thick (squre/retangular) polished, area of each tiles exc. 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or colured cement over & including M&L 15 mm thick screed bed in CM 1:6 to match complete all as spcified and directed.

All as per item no. 47.00 but here-in-above skirting surface over & including M&L 10 mm rendering in Cm 1:4 complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25 mm thick over & including M&L 15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, complete all as specified & directed.

All as per item no. 49.00 but here-in-above in dado/skirting over & including M&L 10 mm rendering in CM 1:4 complete all as specified and directed.

Demoltion of cement cocrete padding of water proofing treatment from roof pading taking down bituminous polythene sheets plaster etc overall thickness n.exc 200mm , cleaning of concete surfaces by wire brushres scrubbing down water and removing the dust debris etc. to a distance 50 mtre but n.exc 250 mtr from the site, complete all as specified & directed.

M&L for plain cement concrete 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) as over roof for making good depression/ undulation to make the existing as filling in depression of roof slab,complete all as specified and as directed.

M&L for carring out roof treatment in the following stages (a) Apply first coat of bituman primer confirming to IS 3384-1986 @ o.30Kg/ Sqm over and including 10 mm thick cement mortar (1:3 ) surfaces finished even and smmoth without using extra cement all as specified. (b) Second coat of bonding material using blown type bitumen confirming to IS- 702-1988 grade 85/25 @ 1.20 Kg/ Sqm. (c) Third layer of APP modified polymeric membrane centre core of 20 micron HMHDPE outer film 20 micron both sides thickness 2.00mm having weight 3.00Kg /Sqm with over lap 100mm & end lap 150. (d) Fourth coat of bonding material using blown type bitumen confirming to IS 702-1998 of grade 85/25 @ 1.20 Kg/Sqm. (e) Fifth and top most layer of surface finish which act as protective layer shall be of 40-50 mm thick PCC (1:2:4) type B-0 using 12.5 mm graded agg of crushed stone padding, well compacted with V -shaped groove 6 mm wide and 10 mm depth filled with mastic bitumen of (1:1) of proportion complete,size of PCC panel with grooves shall not be exceed 0.36 Sqm, complete all as specified & directed.

M&L for preparation of existing concrete surface and applying two layers of thermacol 0.3C subsequently over & including M&L a coat of absorption coat by mixing W51 wear in 1:10 ratio and further water proofing coat by mixing thermacol WP51 + cement in up to 1:1.5:1 by volume with power mixutre and applying over the entire surface, complete all as specified & directed.

Taking down cement plaster any description on brick wall or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc and preparing the surface to receive surface complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1 : 4 on other than fair surfaces or over stone masonary surface faces finished the surfaces fair & even without using extra cement, complete all as specified & directed.

M&L 15mm thick cement plaster in CM 1:6 on other than fair surfaces or over stone masonary surface faces finished the surfaces even & smooth without using extra cement, complete all as specified & directed.

M&L 10mm thick cement plaster on fair faces of brick work or concrete surface in CM 1:4 and finished surface even and smooth without using extra cement as in ceiling, complete all as specified & directed.

M&L for three coat of white wash after preparation of newly plaster surface as in ceiling, complete all as specified & directed.

M&L for three coat of white wash after preparation of newly plaster wall surface, complete all as specified & directed.

M&L for complete removal of existing treatment of wall surfaces and applying two coats of OBD paint (one or more tints) over & including M&L 1.5 - 2mm thick wall care putty on walls , complete all as specified & directed.

Taking up or down 15mm bore steel tubing medium grade and connections, as in walls, ceiling, floor etc including cleaning for re-fixing or credit to the work, complete all as specified & directed.

All as per item no. 62.00 but here-in-above 20 mm bore, complete all as specified & directed.

Supplying and laying of CPVC pipes 20 mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings in wall/floor etc , complete all as specified & directed.

Supplying and laying of CPVC pipes 25 mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings in wall/floor etc., complete all as specified & directed.

S&F in replacement fancy type 15 mm bore Bib taps chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified & directed.

S&F in replacement Brass chromium plated shower rose 125mm dia with swivel joints any size incl fixing to steel pipe or union, complete all as specified & directed.

S&F 15 mm fancy type angle valve cast copper alloy chromium plated screwed high pressure with fancy type handle screwed both ends for iron or union and fixed in repairs, complete all as specified & directed.

S&F in replacement PVC connections 15 mm size with PTMT nuts of length 450/600 mm long as required at site, complete all as specified & directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete with and incl plastic water closet seat cover white closed pattern with flat bottom, and mild steel chromium plated or aluminised hinges device including connecting to flush pipe, complete all as specified & directed.

S & F table top vitreous china ware wash hand basin, approved size (shade and size & model approved by GE) including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 450mm long, complete all as specified and as directed.

S&F in replacement Rimless Single Piece EWC (Brand-I) Size: 395x710x730 mm, with UF Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set,etc complete, S Trap- 300 mm, complete all as specified and as directed.

S&F rep in vitreous china squatting Pan, Orissa Pattern of size 580X440mm white (ISI marked) with integral foot rests and cast iron `P' or `S' trap front or back inlet Including flush pipe 40mm dia HDPE pipe etc, fixed in repairs Including connection to trap etc and provision of cement concrete bedding and making good to floor , complete all as specified & directed.

Supply and fixing in replacement PVC valve less symphonic action type flushing cistern 10 ltrs capacity low level with inlet, ball valve, float and handle including brackets, complete all as specified & directed.

S&F in rep PVC floor trap of 75mm outlet dia, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4), complete all as specified & directed.

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinges device PVC seat covers for water closet pan (pedestal pattern), complete all as specified & directed.

S&F in repairs Wash basins, Vitreous China white, flat back, size 630x450mm excluding tap, waste chain and plugs but including brackets(flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified & directed.

S&F in replacement of Pillar taps, fancy type Cast copper alloy, with capstan heads chromium plated, screwed down high pressure, with or without lettered 'Hot" or Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe, complete all as specified & directed.

S&F in replacement brass chromium plated basin mixer with "Hot" and cold arrangements long sank, fancy type, suitable for fixing of 15mm bore of pipe approved quality, complete all as specified & directed.

S&F in replacement PTMT waste coupling of 32 mm dia for wash basin as in repairs, complete all as specified & directed.

S&F in replacement vitreous china bowl urinal flat back, size of 465 x 355 x265 mm white (minimum ),with grating and union for discharge pipe (excluding flushing cistern and flush pipe and waste pipe ) in repairs, complete all as specified & directed.

S&F in replacement PVC waste pipe for WHB/Urinal complete all as specified and as directed.

Dismantling existing water tank of capacity Exc 250 but n.exc 500 ltrs capacity, complete all as specified & directed.

All as per item no. 85.00 but here-in-above Exc 500 but n.exc 1000 ltrs, complete all as specified & directed.

S&F in replacement 500 ltrs capacity rotational moulded polythene water storage tank white colour, three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I, complete all as specified and directed.

All as per item no. 87.00 but here-in-above 1000 ltrs capacity, complete all as specified & directed.

S&F in replacement 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe & fixed.(Minimum weight 210gms), complete all as specified & directed.

S&F in replacement of CP mild steel grating 100mm dia as in repairs, complete all as specified & directed.

S&F in replacement tubular towel rail 20mm dia brass chromium plated `D' type 60cm long with bracket and fixed, complete all as specified & directed.

S&F in replacement toilet paper holder chromimum plated, complete all as specified & directed.

S&F in replacement towel ring Chromium plated, brass screws (CP) & wooden / plastic cleats (Minimum weight 90gms), complete all as specified & directed.

S&F in replacement health faucet with 1000mm long flexible SS tube with wall hook with brass screws (CP) & wooden / plastic cleats, complete all as specified and directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 100mm bore & taken out of trenches if requiredas directed, complete all as specified & directed.

All as per item no. 95.00 here-in-above, but 75mm dia , complete all as specified & directed.

S&F of 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified & directed.

S&F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified & directed.

S&F of 100 mm bore Cast iron soil, (sand cast) waste and vent pipes, in any length with or without ears, with cement joints, fixed to wall, complete all as specified & directed.

S&F for CI pipe (Sand cast) 75 mm dia laid in floor with cement joint , complete all as specified & directed.

S&F CI bends any radius 100mm, complete all as specified & directed.

All as per item No. 101.00 here-in-above above, but 75mm dia with oval acess door, complete all as specified & directed.

S&F in replacement of stainess steel curtain rod 22 to 25 mm dia with and including two Nos MS brackets and decorative type knobs at ends of each curtain rod fixed to wall, complete all as specified & directed.

Dismantling of asbestos cement (Corrugated, semicorrugated etc) sheets in roof coverings, complete all as specified & directed.

S&F Pre-laminated galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified & directed.

Dismantling of Wall & ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified & directed.

M&L in replacement of 4 mm thick prepainted and designer type E-board in false ceiling (flat or sloping) fixed to and including anodised aluminium snap grid frame size of grid 605 x 605 mm, 4 mm GI wire for hanging and including dismantling, complete all as specified and as directed by Engg.-in-charge.

M&L Preparation of new wooden surface exceeding 10cm width or girth and applying two coat of synthetic enamel paint over & including M&L single coat of pink primer , complete all as specified & directed.

M&L for preparation new or previously untreated surfaces of steel at any description over 10cm in width or girth and apply two coat of syntetic enamel paint over & including M&L single coat of red oxide primer, complete all as specified & directed.

Demolition of stone masonry built in cement mortar, complete all as specified & directed.

M&L for squarred rubble walling Jodhpur type regular coursed well bonded, bedded and solidly hearted built in cement mortar 1:6 , complete all as specified & directed.

All as per item No.111.00 here-in-above but except stone, complete all as specified & directed.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing, complete all as specified & directed.

M&L for providing precast cement concrete Type C1 1:3:6 using (20mm graded aggregate), solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls, complete all as specified & directed.

Raking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar, complete all as specified & directed.

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3, complete all as specified & directed.

M&L for preparing the old surfaces by steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts, trading soil and greasy spots etc and applying two coats of cement base paint on old external walls, complete all as specified & directed.

S&F for Providing precast cement concrete louvers & jallies, 35mm thick in 1:2:4, Type B0 (Using 12.5mm graded agg) and fixed in CM 1:4, complete all as specified & directed.

M & L providing precast concrete Posts 100x100mm size & minimum 75 cm height 1:3:6 type C0 using 12.50 mm graded stone aggregate as in RCC jali post setting in mortar 1:6, complete all as specified & directed.

M&L for complete removal of existing treatment of wall surfaces and applying two coats of acrylic emulsion paint (one or more tints) over & including M&L 1.5 - 2mm thick wall care putty on walls , complete all as specified & directed.

M&L for 18-20 mm thick Black granite stone as in cooking platforms , slabs for oval type WHB,sinks etc & the likes complete laid over & including M&L 15 mm thick cement sand screed in CM 1:4 incl mirror polishing complete & providing necessary holes for gas pipe / water supply pipes etc., complete all as specified & directed.

M&L for 15 to 18 mm thick Udaipur green stone in single piece, as in tread, cills, steps, risers, & etc., machine cut, (table rubbed and polished) best quality as per sample, over & including M&L 15 mm thick screeding in CM1:4 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of stone, complete all as specified and as directed.

Roughening of existing conc floors by picking sweeping clean & washing down with water to remove dust & brushing neat cement slurry with 3.0kg/sqm, complete all as specified & directed.

M&L for 15 mm thick rendering in cement mortar 1:3 using WPC @ 3% by weight of cement or as per manufacturers instruction complet all as specified and as directed. (Note : WPC shall be measured and paid seperatly)

M&L for treating the plastered surface (Sunken floor) with two coat of epoxy or water proofing adhesive coating complete all as specified by the manufacturers instruction, complete all as specified & directed.

M&L for appling one coat of cold emulsion bitumenous primer @ 0.25 Kg/sqm shall applied on plastered surface including side walls. There after a layer of APP membrane 1.5 mm thick as specified above shall be laid by torch application method as per manufacturer instructions including cushion layer of coarse sand thickness 25 mm shall be provided to protect membrane, complete all as specified & directed.

M&L for PCC (1:5:10) lean cement concrete type E2 using 40 mm graded stone aggregate in mass concrete after carrying out satisfactory testing of CI pipe/ PVC pipe joints and slab /wall by filling water for 72 hours. Sunken portion of Nahani/ floor trap and pipe joints shall be embedded in PCC 1:3:6 type C1, complete all as specified & directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the wall/floor below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified & directed.

M&L for preparation of old decorated ceiling surfaces including cornices pilasters by brooming down or steel wire brushing, scraping down,smoke shoot,moulds,moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling, complete all as specified and directed.

M&L for preparation of old decorated wall surfaces plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, including cornices etc and applying one coat of white wash on wall, complete all as specified and directed.

M&L for preparation of old decorated wall surfaces plastered or unplastered, including cornices pilasters by brooming down or steel wire brushing and efforescent salts and applying one coat of OBD on wall, complete all as specified and directed.

M&L for preparation of new/old plastered surface & applying one coat of wall care putty & applying one coat of cement base paint, complete all as specified & directed.

Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc complete

M&L for Point wiring complete with 1.5 sq mm single core multi stranded copper conductor PVC (FRLS) insulated unsheathed cable confirming to IS-694,1100 Volts grade ( ISI Marked) passing in PVC cassing-N-capping 25/32 mm dia fixed on surface of wall/roof/ceiling withexisting/new sunken pressed steel terminal boxes including 3.00 mm thick plastic laminated sheet top cover and 1.50 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) cable for common earth and connecting to earth dolly material and labour suitable for One light/fan/bell point controlled by one, one way switch, complete all as specified and directed

All as per item No 134.00 here-in-above but One socket outlet 3 pin 5/6 Amps on same board

All as per item No 134.00 here-in-above but One socket outlet 3 pin 5/6 Amp on independent board

All as per item No 134.00 here-in-above but One light point controlled by two, two-way switches

All as per item No 134 .00 here-in-above but with using 2.5 Sq mm single core multistanded copper conductor cable(FRLS) including 2.5 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) for common earth wire for 6 pin 16 Amp socket outlet on independent board .

M & L for (concealed) point wiring complete with multistranded copper conductor 1.5 Sqmm PVC insulated unsheathed single core FRLS cable 1100 volt grade, confirming IS 694 & colour code in conduit system of wiring, drawn through in and including non-metalic PVC concealed (including Cutting Chases and make good the distrubed surfaces ) conduit of size 20 mm or med grade as required as site, totally concealed in walls / and surface on floors / ceiling or fixed on surface of walls / columns / beam / tie beam etc by means of saddles and clips etc incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, all as specified, directed and shown on drgs for The rates of chase cutting on wall done concealed conduit and steel terminal boxes are included in the unit rates, suitable for One light/fan/bell point controlled by one, one way switch, complete all as specified and directed

All as per item No 139.00 here-in-above but One socket outlet 3 pin 5/6 Amps on same board

All as per item No 139.00 here-in-above but One socket outlet 3 pin 5/6 Amp on independent board

All as per item No 139.00 here-in-above but One light point controlled by two, two-way switches

All as per item No 139.00 here-in-above but with using 2.5 Sq mm single core multistanded copper conductor cable(FRLS) including 2.5 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) for common earth wire for 6 pin 16 Amp socket outlet on independent board .

Supply and fix switch piano flush type 6 amp single pole one way 230 Volts complete all as specified & directed .

Supply and fix switch piano flush type 16 amp single pole one way 230 V Complee all as specified & directed .

Supply and fix switch piano flush type 6 amp single pole two way 230 Volts complete all as specified & directed .

Supply and fix bell push AC, 230 Volts, 5 Amps complete all as directed.

Supply and fix socket out let flush type 6 amp 3/5 pin suitable for 6 Amp plug top 230 V complete all as specified & directed.

Supply and fix socket out let flush type 3/6 pin suitable for 16 Amp plug top multipurpose 230 V complete all as specified & directed.

Supply and fix bell AC ing dong type 230 volts incl taking down old unserviceable bell.

Supply and fix fan regulator electronic Switch/socket type complete all as specified and directed.

Supply and fixing lamp holder insulated body with back plate batten/angle type for batten fittings incl taking down old unserviceable holder complete all as specified and directed.

Supply and fixing in replacement ceiling rose 3 terminals complete incl taking down all as specified and directed.

Supply and fixing in replacement PVC cassing Capping tee,elbow,bend etc 20/25 mm dia ISI (MMS) incl taking down old unservecable cassing capping all as specified and directed.

S&F in replacement sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-42 DB's suitable for one MCB SPN as incoming and 2 MCB SP as out going,SPN 4Way complete incl dismentaling of old U/S DB all as specified and directed by Engr-in-charge.

S&F in replacement sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 6 MCB SP as out going SPN 8 way complete incl dismentaling of unservceable DB all as specified and directed by Engr-in-charge.

S&F in replacement sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 10 MCB SP as out going SPN 12 way complete incl dismentaling of unservceable DB all as specified and directed by Engr-in-charge.

S&F replacement sheet metal enclosures 415 volt TPN 4 way with 200 Amp rated bus bar, double door IP-43 DB's suitable for one No 63 to 100 Amp 10 KA TPN MCCB as incoming complete incl dismentaling of unservceable DB all as specified and directed by Engr-in-charge.

Supply and Fix in replacement MCB Single pole"B" series 5-32 Amps ISI marked incl dismantaling old unserviceable MCB SP .

Supply and Fix in replacement MCB Single pole & neutral "B" series upto 63. Amps ISI marked incl dismantaling old unserviceable MCB SPN

Supply and fixing in replacement MCB TPN B Curve 63 to 100 Amps Make incl disntaling of old unserviceable TPN MCB

Supply and fix in replacement 6-Watt LED Wall Light (bed light) for reading incl taking down old UNSV light all as specified and directed by Engr-in-charge

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified.

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing replacement LED lights fitting 1x 20W, 220V, Cool White, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing in replcement LED lights fitting 1x 20W, 220V, Warm White, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete

M&L in replacement sub main wiring with PVC insulated and unsheathed 2x 6 Sq mm single core multistrandred copper conductor cable(FRLS) passing through in and including PVC conduit , concealing in walls (by means of chasing including making good existing surface and matching existing surface ) ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 6 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire. Note :- Two runs of cable 6 Sqmm (FRLS) and One run of 6 Sqmm copper conductor(FRLS) along with conduit shall be measured as one unit length including taking down old UNSV submain wiring complete all as directed

M&L in replacement sub main wiring with PVC insulated and unsheathed 2x 6 Sq mm single core multistrandred copper conductor cable(FRLS) passing through in and including PVC conduit surface in walls with all required accesries of conduit ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 6 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire. Note :- Two runs of cable 6 Sqmm (FRLS) and One run of 6 Sqmm copper conductor(FRLS) along with conduit shall be measured as one unit length including taking down old UNSV submain wiring complete all as directed

M & L in replacement Earthing complete with galvanised steel earth plate electrode 60 x x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal/hard/dense ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion . Note : Rates are deemed to be included for necessary earth work , earth pit with RCC cover of size 300X300 x25 mm etc.,complete all as specified and directed.

NOTE:- (i)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount

M/s Ajay kumar Garge (BID ID -3088433)

Narendra General Suppliers (BID ID -3089951)

SNEH CORPORATION (BID ID -3095690)

BEYLIM INFRA (BID ID -3095681)