Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 LAccepted-AOC V P O KATAULA TEHSIL SADAR DISTT MANDI 175005 | MANDI | MANDI | HIMACHAL PRADESH | 175005 | L1 | Accepted-AOC Bidder is L1 and discounted rates are within justified amount. | |
| 2 | L2₹3.6 L+₹61,698 (21.0%)Rejected-Finance | L2 | Rejected-Finance Quoted is Higher |
Tender Value
₹2.8 L
EMD Value
₹5,664
Closing Date
17 Jun 2021, 3:00 pmClosed
Superintending Engineer IIT Mandi
O/o Superintending Engineer IIT Mandi Kamand Distt. Mandi HP-175075
Re-Tender for Providing and Laying of G.I. Pipe line to Botanical Garden from main waterline of North campus of IIT Mandi.
2021_IITMD_628254_3
IIT Mandi (CW)/SE-1150/2021-22/589-91 dt. 27-04-21
Open Tender
Civil Works
Item Rate
30 days
North Campus of IIT Mandi
please refer to NIT
2 documents required · 2 mandatory
₹1,180
The Registrar IIT Mandi
₹5,664
7 Jul 2021
10 Jun 2021
18 Jun 2021
10 Jun 2021
17 Jun 2021
10 Jun 2021
10 Jun 2021 - 16 Jun 2021
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, as directed by Engineer-in-charge. All kinds of soil as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15 mm dia nominal bore per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia nominal bore as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: 25 to 40 mm nominal bore as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality: 15 mm diameter pipe as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality: 25 mm diameter pipe as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15 mm nominal bore as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :25 mm nominal bore as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.
Providing and fixing brass bib cock of approved quality: 15 mm nominal bore as per entire satisfaction and direction of Engineer-in-charge including carriage of material in all lead and lift.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Anshul Gupta
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .