SPECIAL REPAIRS TO BUILDING P-103 TO P-106 OF DSECTOR, DOLPHIN HILLS, VISAKHAPATNAM

Demolition of un-reinforced cement concrete in (below or above ground level) and pavings not exceeding 15 cm thickness complete all as specified and directed.

M&L PCC type B0 (1:2:4) using 12.5 mm graded stone aggregate for levelling course average 25 mm thick complete all as specified and directed.

M&L for 10mm thick rendering in CM (1:3) on concrete surfaces using water proofing compound and finishing the surface even and fair complete all as specified and directed. Note: WPC shall be measured and paid seperately.

Supply only Integral water proofing compound

M & L for Priming the surface with oil based bituminous primer @ 0.50 KG per Sq.m and laying of 3mm thick Attatic Poly Proplene Polymeric water proofing membrane of weight not less than 3.00 Kg per Sq.m reinforced with polyester non-woven fabric of weight not less than 150 Grams per Sq.m, by torch application with side over lap of 100 mm & end over lap of 150 mm & tucked into the chases on vertical surfaces by thermo fusion complete all as specified and as directed.

M&L for chequered cement concrete tiles of size 300x300 mm, 20 to 25 mm thick hydraulically pressed as in floors, set jointed and pointed in neat cement slurry to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for Vitrified Tiles, Double Charged, Coloured, Premium Quality of size not exceeding 0.36 Sq.m, 8 to 10 mm thick as in Floors, set and jointed in cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade /design of tiles shall be as approved by GE.

M & L for Vitrified Tiles, Double Charged, Coloured, Premium Quality of size not exceeding 0.36 Sq.m, 8 to 10 mm thick as in Skirting and Dado, set and jointed in cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.

M & L for Non Skid Ceramic tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.