8121/SAR-28/E8 REPAIR/REPLACEMENT OF SANITARY FITTINGS, PLUMBING, JOINERY AND ROOF SHEET ETC AT 1 AFSB DEHRADUN UNDER GE (AF) SARSAWA

Amount

Dismantling of plain or corrugated steel sheeting any gauge in roof covering complete all as specified

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, valley and hips gutter fixed with self tapping screws complete all as specified and directed.

Demolition of brick work built in cement mortar incl all quoins, arches, pillar etc complete all as specified and directed

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1;6 complete all as specified and directed.

Taking down cement plaster on brick wall including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15m thick on fair faces of brick work in CM 1:6 and finished surfaces even and fair without using extra cement complete all as specified and directed.

M&L renderinng 15 mm thick on fair faces of brick work in cm 1:4 and finished even and fair complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat primer complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including removing of cement mortar bedding (but not backing), and removing from site complete all as directed.

S&F non Skid ceramic coloured tiles 7-8 mm thick(Square/rectangular) area of each tile exceeding o.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over 15 mm thick screed bed in cm 1:6 complete all as specified and directed.

S&F ceramic glazed colured/ design tile in vertical surfaces (300x 200mm) x 7mm thick on vertical surfaces such as dado and skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over 10 mm thick plaster in cm 1:4. complete all as specified and directed.

S&F Coloured non skid ceramic tiles 7 to 8mm thick (square/rectanglar) area of each tile exc 0.11 sqm but n exc 0.18 sqm ,in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match the colour of tiles, laid over 15mm thick bedding layer in CM 1:4 complete all as specified and directed.

M&L for 40 mm thick plain cement concrete 1:2:4 type B-1 ( 20 mm graded aggregate) as in sub base of floor complete all as specified

Taking up or down steel tubing and connection incl removal from site bore of pipe 15mm complete all as directed.

Taking up or down steel tubing and connection incl removal from site bore of pipe 20mm complete all as directed.

S&F 15mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

S&F 20mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

Cutting chases, pinning in brick work making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified

S&F in repair viterous china squatting pan (orissa pattern) long pan of size 580x440mm white with integral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush pipe) complete all as specified

S&F in repairs vitreous china wash down water closet pan padestal pattern white including jointing to flushing cistern and flush pipe antisyphonage pipe etc complete all as specified and directed

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified.

S&F in repair vitreous china white wash hand basin flat back of size 550 x 400 mm including brackets ,brass CP waste coupling &waste pipe complete all as specified and directed.

S&F in repair 10 ltr capacity PVC low level flushing cistern including PVC syphon and float valve with PVC long band for out let connection of cistern with WC complete fixing the cistern with wall in connecting with WC complete all as specified and directed

S&F in repair 15mm bore chromium plated fancy type bib tap of cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified.

S&F in repair chromium plated stop valves/ angle valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends fixed, 15mm bore complete all as specified ( Make Jaguar)

S&F in repair 15 mm chromium plated Stop valves ( concealed type) , cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions complete all as specified

S&F in repair 15mm nominal bore PVC connection 450mm long with two brass nuts and PVC washer complete all as specifed

Demolition and breaking up drain pipes and fittings of internal dia 75 to 100 mm and under (CI, PVC, AC etc ) set in cement mortar.

S&F in repair 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified

S&F 110mm PVC (SWR) bends any radius including jointing with solvent cement complete all as specified

S&F 75 mm PVC (SWR) bends any radius including jointing with solvent cement complete all as specified

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting unoin to pipe overall size 915mm x 460mm & bowl size 410mm x330mmx 160mm complete all as specified and directed.

S&F in repair 15 mm dia pillar taps, cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed all as directed

S&F in repair 15mm Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed (Make: jaguar or equivalent)

S&F in repair CP mixer for mixing hot & cold water for wash hand basin single lever complete all as specified and directed .

S&F in repair CP wall mixer for mixing hot & cold water complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staplescomplete all as specified and directed.

M&L for 18-20mm Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Disconnecting and cleaning of existing water storage tanks setting aside (lowering if required) for repair, cleaning etc and hoisted if required reconnecting and refixing in position of capacity 500ltr (write cleaning date on tank by paint ) complete all as specified and directed.

Disconnecting and cleaning of existing water storage tanks setting aside (lowering if required) for repair, cleaning etc and hoisted if required reconnecting and refixing in position of capacity 1000ltr complete all as specified and directed.

Disconnecting and cleaning of existing water storage tanks setting aside (lowering if required) for repair, cleaning etc and hoisted if required reconnecting and refixing in position of capacity 3000ltr complete all as specified and directed. (Note:- For item 48 to 50. (i) Writing the date of cleaning and next due date of cleaning of the tank by synthetic enamel paint. (ii) The cost of the same shall be deemed included in the respective items).

S&F in replacement 500 ltrs capacity Rotational moulded polyethylene water storage tanks double layered, ISI Marked (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including brass float valve with pvc ball complete all as specified and directed.

S&F in replacement 1000 ltrs capacity Rotational moulded polyethylene water storage tanks double layered, ISI Marked (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including brass float valve with pvc ball complete all as specified and directed.

supply and fix in repair brass leg for , wall mixture and basin mixture of any description etc, complete all as specified and directed.

Supply and fix in repair 20 mm Ball brass valves, high pressure, with polythene float and fly- nut, scre-wed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply and fix in repair 15 mm Ball brass valves, high pressure, with polythene float and fly- nut, scre-wed for iron pipe or brass ferrule and fixed complete all as specified complete all as specified and directed.

Supply and fix in repair 32 mm dia PVC waste pipe for WHB 90 cm long with union, complete all as specified and directed.

S&F in repairs small fittings GI medium grade such as sockets,elbow,nipple,tee,union etc for 15mm bore pipe, complete all as specified and directed.

All as per Srl item No. 57 above but for 20mm bore pipe.

Supply and fix in repair CP grating 125mm dia fix on floor/ nahani trap fixed with cement mortar, complete all as specified and directed.

All as per item No. 59 above but for 100mm.

S&F in repairs PVC tank lid/cover for sintex water storage tank (cylindrical) of 500/1000 ltrs capacity tanks with GI sheet or nails on top of cover for monkey prevent , complete all as specified and directed.

S&F in repair 15mm chromium plated brass heath faucet or Jet with all fittings for water closet complete all as specified and directed.

S&F door Seal steel with rubber/clothes sweep for fixing on bottom of door to stop insect from bottom of door complete all as specified and directed.

Dismantling ceiling board (fiber, pulp, insulated any thickness including cover fillets) complete all as specified

M&L for false ceiling made out of E-board classic of size 600 x 600 x 4 mm thick, GI frame consisting of main Tee of size 38.50 x 24.00 mm and cross Tee of size 28.50 x 24.00 mm thick made out of PGI sheet 0.30 mm thick doubled at web and single at flange, flange covered with coated sheet 0.25 mm thick and angle 24.00 x 24.00 x0.4 mm thick powder coated suspended with GI wire 3 mm dia and up to 2 Mtrs long complete including plugging fixing of angle to brick walls with steel rawl plugs @ 450 mm c/c and applying two coats of OBD to the ceiling board complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair CP mixer for mixing hot & cold water for kitchen sink single lever complete all as specified and directed ( Make:Jaquar or equivalent)

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm and removing from site complete all as specified and directed.

All as item item No 68 above but exc 1.50 Sqm and n.exc 4.00 Sqm each complete.

Taking down shutters of any description n.exc 1.00 Sqm each and removing from site complete all as specified.

All as item no 70 above but exc 1.00 Sqm and n.exc 2.00 Sqm each complete.

S&F IInd class hardwood plain solid straight chowkhat and frame wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F MS work as in hold fast and similar small articles conforming to Fe-290, Gde E-165 complete all as specified

M&L for PCC (1:3:6) type C-1 (Using 20mm graded stone aggregate) as in cills, copings, bed blocks for hold fasts and the like complete all as specified and directed.

S&F, 30mm thick Flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides of Make :- Century or equivalent complete all as specified and directed.

M&L 35mm thick IInd class hardwood glazed and skeleton factory made shutters with three panels, open rebated and prepared to receive glass gauge etc, edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutter as specified in SSR (Part-I)- 2009 complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, and fixed in opening as per specification and drawing complete all as specified and directed. Make : Rajshree or equivalent.

S&F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails .MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail ,bottom rail and lock rail, Paneling of rudraksha colour PVC sheet to be fitted in MS frame welded with and including stainless steel hinges 100mm medium weight complete all as specified and directed. Make : Rajshree or equivalent.

S&F Steel windows with side hung shutters with glazing bars, dovetailed or welded including projecting type hinges with steel handle, and steel peg stay complete all as specified.

Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm each pane complete all as specified and directed.

S&F mild steel framed work as in grills, gratings etc with ends of bars shouldered and riveted or forged into spikes, framed guard bars, barred iron doors etc, conforming to Fe-290, Gde-E-165 all as specified and directed.

S&F MS butt hinges 100mm long medium weight cold rolled complete all as specified and directed.

S&F aluminum anodized barrel tower bolt 200mm long of extruded section complete all as specified and directed.

S&F aluminum anodized sliding door bolt 300mm long with hasp and staples (bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

S&F aluminum bow handle "D" type anodized 150mm long complete all as specified and directed.

S&F in repair Aluminium extruded section Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixedcomplete all as specified and directed.

M&L for Repair to steel window of any size by replacing worn out hinges or worn out portion such as glazing bars, fitting and fixture positioning of shutters etc. and cleaning the window surrounding and renewal of fitting and fixture (unserviceable) including greasing, oiling and welding complete all as specified and directed.

S&F in repair drapery rod 30mm dia Aluminum fancy type powder coated wood finish including rings, knobs and brackets complete all as specified and directed.

S&F in repairs, 18/19mm MDF BWR Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. Make :- Century or equivalent.

S&F in repair 30mm width of flaps Continous (Piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F in repair for 40mm dia cupboard knobs fixed with nut, screws and washer of wooden finish brass polished complete all as specified and directed.

S&F in repair magnet catcher to wooden frame work complete all as specified and directed.

M&L for preparation of new surfaces of wood and wood based materials of any descriptions not otherwise described over 10Cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for anodiezed aluminum sliding window(bombay sliding window ) made out of hollow section as mentioned below and glazed with tinted colour glass 4 mm thick , fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed. (Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 50.30x26x1.20mm Chowkhat top & sides size: 50.30x26x1.00mm )

Supply and fix aluminum alloy powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having 02 Nos Disc or D type handle, 02 Nos aluminum tower bolt 200 mm size, one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make:- Sandhu/Ritz) shutter to be partly glaze with 5mm thick tined coloured glass in upper pannel and partly pannelled with 12mm thick both side laminated particle board in lower pannel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete all as specified and directed at site. (Chowkhat Frame:- 101.60x44.45x1.60mm Shutter verticle style :- 85x44.45x1.56mm shutter middle Rail :- 83.50x44.45x1.54mm Shutter Top Rail and bottom Rail :- 114.30x44.45x1.55mm Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Navipan / Puratuff / Kitlam (iii) Glass: Saint gobain / Modi guard / Tata).

Taking down aluminium grill any size any type any other description

Supply and fix anodised aluminum Grill for window made of 6mm dia aluminum bars, size of mesh 50mm X 50mm fixed together with aluminum frame for window complete all as specified and directed.

Supply and fix Aluminium door handle disc or D type, 200mm, Make Jindal

Fixing only in repairs to aluminum doors shutters swing type or sliding type by taking down frame opening out joints, replacing corner piece/pivot and replacing defective rubber beading (if any) jointing againfixed to frame size of door exec 1.0 sqm but n,exec 3.0 sqm each complte all as specifeid and directed

Nijamudin & Sons

M/s RP AGRAWAL

RADHA ENTERPRISES