AUGMENTATION OF EXTERNAL ELECTRIC SUPPLY AT VISAKHAPATNAM

Amount

NOTE : Schedule "A" Part I to Part XV are prepriced by MES. Bidders shall insert their lumpsum amount in Green coloured field under col-6 only

Lumpsum price worked out by the contractor for "BUILDING AND STRUCTURES", as listed in Schedule "A" Part – I

Lumpsum price worked out by the contractor for " SITE CLEARANCE / AREA DEVELOPMENT / EARTHWORK EXCAVATION", as listed in Schedule "A" Part – II

Lumpsum price worked out by the contractor for " PILE FOUNDATION", as listed in Schedule "A" Part – III

Lumpsum price worked out by the contractor for "ROAD / PATH / HARD STANDING/INTERLOCKING", as listed in Schedule "A" Part – IV

Lumpsum price worked out by the contractor for "SEWAGE DISPOSAL ", as listed in Schedule "A" Part – V

Lumpsum price worked out by the contractor for "CABLE DUCT/DRAIN/NALLA ", as listed in Schedule "A" Part – VI

Lumpsum price worked out by the contractor for "[RETAINING WALL/BOUNDARY WALL/CHAINLINK FENCING ", as listed in Schedule "A" Part – VII

Lumpsum price worked out by the contractor for "AIR CONDITIONING ", as listed in Schedule "A" Part – VIII

Lumpsum price worked out by the contractor for DEMOLITION/DISMANTLING ", as listed in Schedule "A" Part – IX

Lumpsum price worked out by the contractor for "LIGHTENING PROTECTION ", as listed in Schedule "A" Part – X

Lumpsum price worked out by the contractor for "AUTOMATIC FIRE ALARM SYSTEM", as listed in Schedule "A" Part – XI

Lumpsum price worked out by the contractor for "INTERNAL WATER SUPPLY", as listed in Schedule "A" Part – XII

Lumpsum price worked out by the contractor for "INTERNAL ELECTRIC SUPPLY", as listed in Schedule "A" Part – XIII

Lumpsum price worked out by the contractor for "EXTERNAL WATER SUPPLY ", as listed in Schedule "A" Part – XIV

Lumpsum price worked out by the contractor for "EXTERNAL ELECTRIC SUPPLY ", as listed in Schedule "A" Part – XV

Schedule "A" Part - XVI [Miscellaneous Items]

SITE CLEARANCE / AREA DEVELOPMENT / EARTHWORK EXCAVATION

Site clearance by clearing away all shrubs, vegetation, grass, bushes, weed, trees and saplings of not exceeding 30 cm in girth , measured at a height of one meter above ground level. Useful material shall be stacked and rubbish/ useless material disposed off as directed. Roots of trees and saplings shall be removed by digging out roots upto 60 cm below the ground level or 15 cm below the formation level, whichever is lower. All holes and hollows, formed in the ground by digging out of roots shall be carefully filled up with the earth, well rammed and levelled,. Boulders which may interfere with the work shall be removed, after breaking down if necessary, complete all as specified and as directed.

Bringing approved soil from outside MOD land of distance n.exc 20KM, complete all as specified and as directed.

PILE FOUNDATION

All as per Item No.18 but boring through hard rock for standard 2 m depth for 450 mm pile complete all as specified and directed.

Supply of Admixture Conplast SP 430 A2 or equivalent to be added as per manufacturer instructions complete all as specified and directed.

Providing and installing MS liner (plain or chequred ) for bored cast in situ concrete piles with necessary stiffners,driving shoe with continuous welding including cutting,bending welding etc conforming to Gde E -250 quality B including applying one coat of primer with two coats of epoxy based anticorosive treatment complete all as specified and directed. Note :- (i) As of now considering plates for provn of 6mm thick MS liner upto a depth of 10 m. However the decision by Engg-in-charge /GE at site based on visual inspection of bailer samples from pile bore holes ,past experience and laboratory test result is final and binding. (ii) Rate shall be inclusive of cutting the linear at cutoff level.The rate is deemed to include for cutting,removal and salvage value of the material so obtained.

Carrying out initial load test on test piles as per standard procedure laid down in IS -2911 by static load test method incl all arrangemets for compressive strength including construction of test cap ,dismantling of cap after the test and cleaning the site and maintaining complete records of load settlements etc as specified and directed by GE and submission of reports for a test load as per IS for 450 mm dia pile and after the test site clearance with maintaining complete records of load settlement etc as specified and directed by GE and submission of reports complete all as specified and directed

Carrying out sonic integrity test for 450 mm dia pile complete all as specified and directed

ROAD / PATH / HARD STANDING/INTERLOCKING

M & L of 20 cm thick GSB in two layers of 10 cm thick each with coarse aggregate of grading V rolled to required gradient and camber complete using necessary mechanical paver/Grader and vibratory soil compactor of capacity 8-10 ton, complete all as specified and as directed.

M&L of 20 cm thick WBM in two layers of 10 cm thick (compacted thickness) each with coarse aggregate of grading 1(90 to 40mm size) of granite, basalt or trap stone, rolled to required gradient and camber complete using mechanical paver/Grader and Pandom vibrator of capacity minimum 8-10 Tons at OMC to achieve atleast 98% MDD determained using modified proctor density determination method as per IS code on prepared GSB surface complete all as specified and as directed.

Painting lines, dashes, arrows, letters etc on road pavement and the like n.exc 10 cm wide with road marking paint, white or golden yellow complete all as specified and as directed.

Providing 200 mm thick Cement concrete grade M-20 using 20 mm aggregate in foundations for hardstanding complete all as specified and as directed.

SEWAGE DISPOSAL

S&F of LLDPE septic tank for 10 Users designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc. complete all as specified and as directed.

CABLE DUCT/DRAIN/NALLA

Providing and laying precast reinforced cement concrete slabs 12.5 cm thick M-30 including reinforcement and 12 mm dia MS handle (with plain or interlocking joints as directed)setting in mortar 1:6, complete all as specified and as directed.

RETAINING WALL/BOUNDARY WALL/CHAINLINK FENCING

Hand packing of broken stone or boulder of gauge not exceeding 40 to 80 mm at back of walls, complete all as specified and as directed.

AIR CONDITIONING

Design,Supply ,installation, testing and commissioning of package air conditioning installations A/C by VRV/VRF out door unit technology of capacity 3 x 12 TR [ 2 working + 1 standby] complete all as specified and as directed.

DEMOLITION/DISMANTLING

Taking down TPN DB 4/6way including MCBs/Isolators from its position for further dispoasal, complete all as specified and as directed.

Dismantalling steel rolling shutter complete all as specified and as directed.

Dismantling water tanks of Exc 500 itres and not.exc 1000 itres complete all as specified and as directed.

AUTOMATIC FIRE ALARM SYSTEM

Supply, laying, jointing and testing of 2CX1.5 sq.mm copper FRLSH cable including PVC concealed conduits of medium grade & suitable size and fixing accessories conforming to I.S. 1554 complete all as specified and as directed

Supply and fixing carbondioxide type fire extinguisher of capacity 4.5 kgs complete with all fittings and accessories with ISI mark, cylinder conforming to IS: 7285 with CCOE approved screw down valve ISI marked complete all as specified and as directed

Supply and fixing carbondioxide type fire extinguisher of capacity 9.0 kgs complete with all fittings and accessories with ISI mark, cylinder conforming to IS: 7285 with CCOE approved screw down valve ISI marked complete all as specified and as directed

Supply and fixing dry chemical powder ABC (stored pressure) mono ammonium phosphate base fire extinguisher of capacity 9 kgs conforming to IS: 15683. powder confirming to IS: 14 609 with ISI mark, duly pressurized by nitrogen gas, controllable discharge valve fitted with pressure guage, discharge hose and nozzle, internal/external powder coated as per IS complete all as specified and as directed

Supply and fixing dry chemical powder (outside CO2 cylinder type) sodium bi-corbonate base powder confirming to IS:4308, CO2 cylinder confirming to IS:7285, trolley mounted higher capacity controllable discharge hose & nozzle, internal / external powder coated as per IS: 10658 with ISI Marked fire extinguisher of capacity 25 kg. complete all as specified and as directed

EOT CRANE

LIGHTENING PROTECTION

Single pointed Air termination Aluminium Rod 12 mm dia 500 mm long with Aluminium base plate of size 125 x 125 x 10mm fixed over hylam sheet of size 175 x 175 x 10mm and fixed on roof complete all as specified and as directed.

Aluminium strip 25x3 mm complete with saddles and fixing screws for fitting the strip. complete all as specified and as directed.

Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5m below the normal ground level connected with GI earth strip 32x6mm by means of bolts, nuts, check nuts & washers of galvanished iron steel including necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50m, with and including PCC chamber in PCC (1:2:4), type B1,using (20mm graded stone aggregate), "mild steel angle iron frame" made out of MS angle iron of size 40x 40 x 6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20mm dia medium grade GI pipe for watering 40mm dia medium grade, GI pipe for lead protection in & including alternate layers of charcoal dust and common salt complete all as shown in electrical "Plate No '3' of SSR Part I and connected to earthing test point all as specified and indicated including testing on completion complete all as specifies and as directed.

DG SET

Supply,installation,testing,comissioning of silent engine generating set with accoustic enclosure as per CPCB IV norms 415 volts, 62.5 KVA, 3 phase 0.8 power factor, 50 Hz, 1500 RPM self excited self regulated brushless AC generator including accoustic enclosure suitable for ambient condition and conforming to condition under IS 4722, BS 5514/ 2613 /5000 with and including the accessories as per details mentioned in ANNEXURE - A of BOQ complete all as specified and as detailed below: NOTE : (i) ANNEXURE - A has been uploaded separately alongwith tender documents and is part of BOQ for all purposes.

Earthing complete with galvanized earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized iron strip of 32x 6 mm (up to 7.5m in length from earth plate) by means of brass bolts and nuts checknuts and washers of brass all as specified and shown in electrical plate no 3 of SSR part 1 including Charcoal and rock salt with necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with CI Cover 10mm thick Hinged to CI frame with MS bar 6mm dia 150mm c/c reinforcement, watering funnel, 50 mm dia medium grade GI pipe for protection of earth electrode and 20mm dia GI pipe medium gdade for watering all as specified and directed and tested on completion.

INTERNAL ELECTRIC SUPPLY

Point wiring with 1.5 sqmm PVC insulated and unsheathed copper conductor cable multistranded 1100 volts grade, FRLSH, ISI marked drawn through and inculding non metallic PVC rigid concealed conduit and conduit accessories, medium grade, ISI marked, concealed including provn of pre fabricated pressed steel terminal box of suitable size made out of 2 mm thick sheets, for mounting modular brackets, including modular brackets and switch plates as required at site for fixing modular type switches, sockets etc including one run of 1.5 sqmm PVC insulated unsheathed copper cable FRLSH for earth continuity green in colour, connected to earth duly complete all as specified and directed for the following :-

(a) One light point controlled by one switch

(b) One fan (ceiling fan/Ex.fan) point controlled by one switch

(c) One 3 Pin socket outlet 6 amps socket on independent board

All as per item No.47 here-in-before but One 3 pin socket outlet 15/16 amps switch socket out let on independent board with 4 sqmm FRLSH PVC insulated, unsheathed, multistranded wire for phase and neutral one run of 4 sqmm copper cable green in colour for earth continuty conductor all as specified and directed.

All as per item No.47 here-in-before but one light point controlled by two Nos two way switches complete all as specefied and directed.

LED adore lamp for AC 240 Volt supply, B22 type,CDS five star, 10 watts of five star rated complete all as specified and as directed.

Exhaust fan 380 mm sweep , (Heavy duty),900 RPM, complete with louvers suitable for operation on 240 V AC, 50 Hz AC supply fixed on wall including making of neccessary opening ,fixing and making good the disturbed surfaces etc complete with and inclussive of making necessary electric connection from ceiling rose to fan through twin core flexible wire complete all as specified and as directed.

Energy efficient LED tube light fitting(mirror optic) with tube 5/6 watts or nearest size ,240V, 50hz surface mounted, decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly, energy efficient ready to use pack of complete with mounting bracket etc including connecting up with 1.0 sq mm 3 core flexible copper conductor cable complete all as specified and directed

Energy efficient LED tube light fitting with tube 20 watts or nearest size ,240V, 50hz surface mounted, decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly, energy efficient ready to use pack of complete with mounting bracket etc including connecting up with 1.0 sq mm 3 core flexible copper conductor cable complete all as specified and directed

LED Security light fitting with 30W New generation Energy saving & environmental friendly long life made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having top opening seperate driver compartment with IP66 protection pre wired with 1.0 Sq mm 3 core copper conductor cable upto connector including 1.5 m long GI Tubing light grade of 32mm dia bend to shape for fixing on wall/pole with suitable MS brackets nuts and bolts etc compelte all as specified and as directred.

Energy saving, enivironmentally friendly & robust high bay light LED 60 watt energy efficeint P.F> 0.95, >100 lum/watt, with and including LED light driver holder connecting of with three core flexible copper conductor cable of suitable size, complete all as specified and as directred.

Submain wiring complete with earth wire of PVC insulated multistranded copper conductor FRLSH cable, ISI marked with and inclussive of suitable size PVC rigid counduit concealed to wall, and PVC wire of size 4x16 sqmm for phase and neutral duly colour coded and 1x16 sqmm for earth continuity conductor green in colour complete all as specified and as directed. Note:- 1 Run of PVC conduit , 4 runs of 16 Sqmm & 1 run of 16 Sqmm will be measured as one unit.

Submain wiring complete with earth wire of PVC insulated multistranded copper conductor FRLSH cable, ISI marked with and inclussive of suitable size PVC rigid counduit concealed to wall, and PVC wire of size 2x 6 sqmm for phase and neutral duly colour coded and 1x6 sqmm for earth continuity conductor green in colour complete all as specified and as directed. Note:- 1 Run of PVC conduit , 2 runs of 6 Sqmm & 1 run of 6 Sqmm will be measured as one unit.

Submain wiring complete with earth wire of PVC insulated multistranded copper conductor FRLSH cable, ISI marked with and inclussive of suitable size PVC rigid counduit concealed to wall, and PVC wire of size 2x 4.0 sqmm for phase and neutral duly colour coded and 1x4.0 sqmm for earth continuity conductor green in colour complete all as specified and as directed. Note:- 1 Run of PVC conduit , 2 runs of 4 Sqmm & 1 run of 4 Sqmm will be measured as one unit.

Supply and fixing concealed in wall MCB DB double door type, TPN 4 way 415V, 50Hz , IP 43 protection with 200A rated isolated neutral bus bar , mechanical strength IK09,Door earthing including provision for fixing MCB TPN 80 amp as incommer and outgoing circuits MCB SP/TP complete, fill empty way with blanking plates complete all as specefied and directed. Note : MCB and MCBs shall be measured and paid seperately.

Supply and fixing concealed in wall SPN MCB DB double door type, 12 way IP 43 protection with 200A rated isolated neutral bus bar , mechanical strength IK09,Door earthing including provision for fixing MCB SPN 40 AmpS as incommer and outgoing circuits MCB SP/TP complete, fill empty way with blanking plates complete all as specefied and directed. Note : MCB and MCBs shall be measured and paid seperately.

Supply and fixing concealed in wall MCB DB. double door type, Single pole and neutral 4way sheet steel phospetised powder painted with 200 amps rated bus bar 240 Volts nautral link, IP:43 protection, complete all as specified and directed.

Earthing complete with galvanised steel plate electrode 60cmX60cmX6mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level)with top edge of the plate not less than 1.5 metres below normal groundlevel, connected to GI strip of 25mm x 4mm by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No-3 of SSR Part-I connected to earthing test point all as specified or indicated including excavation and connected earth work in hard/dense soil, PCC 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe and 40 mm bore GI medium grade for earth lead protection pipe connected upto DBs, and suitable CI top cover with handle, funnel, strainer,charcoal, salt and testing on completion all as specified and directed. Note- Rate quoted deemed to be include excavation and earth work in any type of soil with PCC workcomplete all as specefied and directed.

Earth continuity galvanised iron strip of size 25mm x 4mm as earthing lead fixed to wall with and inclussive of GI pipes 25 mm dia light grade for protection of earth strips or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation complete all as specified and directed.

EXTERNAL ELECTRIC SUPPLY

Supply, Installation, Testing and Commissioning of copper wound Power transformer step down outdoor type 132/33 KV, 10/16 MVA, ONAN/ONAF, Vector group Star/star (YNyn0) with on load tap changing gear (+) 5% to (-) 15% in steps of 1.25% on HV side, with terminal arrangement of HV Outdoor Bushings/LV Cable Box and all standard accessories as per IS 2026 and as specified in PS, including first fill of oil complete. comprising of accessories as per details mentioned in ANNEXURE - B of BOQ complete all as specified and as detailed below: NOTE : (i) ANNEXURE - B has been uploaded separately alongwith tender documents and is part of BOQ for all purposes. MAKES : Bharat Bijlee/ Crompton Greaves/Seimens/Schneider/ Voltamp

Supply, fixing, testing and commissioning of outdoor duty isolator, motor operated as well as hand operated triple pole, off circuit, fault making, horizontal mounted, centre post rotated double break, 132 KV/145KV, 1250 Amps with short time rating of 40 KA for 3 sec, 50 Hz ,3 phase, including earth switch hand operated as well as motor operated with FRP coated control boxes all as specified in particular specification and as per IEC:62271-102 complete all as specified and as directed.

Supply, install, testing and commissioning of lightning arrestor single pole made of porcelin brown glazed, heavy duty station class, gapless, zinc oxide type (non linear) fitted with pressure relief device, arc diverting ports, grading/corona rings, discharge counter with ammeter, mounting insulator complete all as specified and as per IS 3070 (Part I) and with following parameters:- Nominal system voltage : 132 KV Normal discharge current rating : 10 KA MAKES : CGL/Lamco/Oblum

Supply, fixing, testing and commissioning of bus post insulator made of porcelin, brown glazed, suitable for heavily polluted atmosphere and suitable for 145 KV and all as per IS 731 complete all as specified and as directed.

Supply, fixing, testing and commissioning of disc/string insulator made of porcelin vitreous brown, suitable for heavily polluted areas, ball and socket type with socket, ball, pin shall be machined steel and hot dip galvanised 11000 volts grade, 70 KN breaking capacity used in stack to get 132 KV grading and as per IS 2486 complete all as specified and directed.(12 Nos 11 KV Disc insulators )

Design ,Material and labour for galvanised steel structures lattice type bolted connection, made from rolled mild steel sections and hot dip galvanised after pre treatment of steel members, with minimum zinc coating 910 gms/sqm, with hot dipped bolts, nuts and washers shall be electro galvanised complete all as specified and as per relevant IS Note: (i) Structural drawing of Lattice towers shall be as per IS/IEC standard suitable to 132 KV sub station yard and same shall be got approved by Accepting Officer before execution. (ii) The contactor shall submit the complete designing and layout of Lattice structural drawing for approval of Acceptance Officer before execution of work.

Supply, Installation, Testing and Commissioning of cable XLPE insulated, armoured, 132 KV grade (E) copper conductor UG cable, laid in trenches/on structures/in cable duct horizontally or in tier formation as per site condition complete all as per IS specifications of size 1 core x 630 sqmm. The cable shall be of EHV grade single core, armoured stranded compacted circular copper conductor of cross section 630 sq.mm, core screening by a layer of semiconducting tape followed by a layer of semiconducting compound, cross linked polyethylene (XLPE) dry cured insulation, insulation screening with semiconducting compound extruded directly over the insulation, longitudinal sealing by a layer of non woven tape with water swellable absorbent over insulation screen, followed by radial sealing of corrugated & seamless or seam welded aluminum with asphalt coating & overall PE sheathed & graphite coated/semi conducting layer and conforming to the technical particulars of specification. IS 7098 part 3 shall be followed for manufacturing of cable along with technical specification, complete all as specified and directed. MAKES : Universal/ KEI/RPG/CCI

Supply, laying, jointing , testing and commissioning multi core copper conductor cables, PVC insulated, LT 1100 volts grade GI strip/wire armoured in ducts/on structures including clamps, terminations on both ends with glands and connecting up to the equipment and of size 4 core 1.5 Sqmm, complete all as specified and directed.

Supply, laying, jointing , testing and commissioning multi core copper conductor cables, PVC insulated, LT 1100 volts grade GI strip/wire armoured in ducts/on structures including clamps, terminations on both ends with glands and connecting up to the equipment and of size 4 core 2.5 Sqmm, complete all as specified and directed.

Supply, laying, jointing , testing and commissioning multi core copper conductor cables, PVC insulated, LT 1100 volts grade GI strip/wire armoured in ducts/on structures including clamps, terminations on both ends with glands and connecting up to the equipment and of size 6 core 2.5 Sqmm, complete all as specified and directed.

Supply, laying, jointing , testing and commissioning multi core copper conductor cables, PVC insulated, LT 1100 volts grade GI strip/wire armoured in ducts/on structures including clamps, terminations on both ends with glands and connecting up to the equipment and of size 4 core 4 Sqmm, complete all as specified and directed.

Supply and fix GI cable tray perforated on walls/MS angle iron supports of 200 mm width including bends, coupler plates complete all as specified and directed. Note: Angle irons used for fixing cable trays will be measued and paid separately.

Supply and fix GI cable tray perforated on walls/MS angle iron supports of 300 mm width including bends, coupler plates complete all as specified and directed. Note: Angle irons used for fixing cable trays will be measued and paid separately.

MS channel, angle iron, flat iron, bent to shape including welding, drilling holes, fixing, provision of bolts, nuts and washers including painting with two coats of epoxy over one coat of primer(For fixing cable trays and for cable supports) complete all as specified and as directed.

Material and labour for provision of earthmat laid in trenches/ducts/walls made of GI 100 x 10 mm size of GI strips including jointing (rivetting and brazing,etc) complete all as specified and as directed

Material and labour for provision of earthmat laid in trenches/ducts/walls made of GI 75 x 10 mm size of GI strips including jointing (rivetting and brazing,etc) complete all as specified and as directed

Material and labour for provision of earthmat laid in trenches/ducts/walls made of GI 50 x 6 mm size of GI strips including jointing (rivetting and brazing,etc) complete all as specified and as directed

Supply and fix earth strip 100 x 10 mm copper strip laid in trench/floor/walls including jointing ( rivetting and brazing,etc) complete all as per specified and as dirercted.

Supply and fix earth strip 50 x 6 mm copper strip laid in trench/floor/walls including jointing ( rivetting and brazing,etc) complete all as per specified and as dirercted.

Supply and fix earth strip 32 x 6 mm copper strip laid in trench/floor/walls including jointing ( rivetting and brazing,etc) complete all as per specified and as dirercted.

Supply and fix earth strip 32 x 6 mm GI strip laid in trench/floor/walls including jointing ( rivetting and brazing,etc) complete all as per specified and as dirercted.

Supply, laying, jointing and testing of LT UG cable, XLPE insulated, armoured, electric power cables (heavy duty) 1100 Volts grade with aluminium conductor passing through duct/trenches on angle iron supports including glanding, crimping and connecting up of size 95 Sqmm and 3.5 core complete all as specified and as directed.

Supply, laying, jointing and testing of LT UG cable, XLPE insulated, armoured, electric power cables (heavy duty) 1100 Volts grade with aluminium conductor passing through duct/trenches on angle iron supports including glanding, crimping and connecting up of size 50 Sqmm and 3.5 core complete all as specified and as directed.

Supply, laying, jointing and testing of LT UG cable, XLPE insulated, armoured, electric power cables (heavy duty) 1100 Volts grade with aluminium conductor passing through duct/trenches on angle iron supports including glanding, crimping and connecting up of size 35 Sqmm and 3.5 core complete all as specified and as directed.

Supply, laying, jointing and testing of LT UG cable, XLPE insulated, armoured, electric power cables (heavy duty) 1100 Volts grade with aluminium conductor passing through duct/trenches on angle iron supports including glanding, crimping and connecting up of size 25 Sqmm and 4 core complete all as specified and as directed.

Supply, laying, jointing and testing of LT UG cable, XLPE insulated, armoured, electric power cables (heavy duty) 1100 Volts grade with aluminium conductor passing through duct/trenches on angle iron supports including glanding, crimping and connecting up of size 16 Sqmm and 4 core complete all as specified and as directed.

Supply, Installation, Testing and Commissioning Earthing complete with copper earth plate electrode 300x300x3 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to copper earth strip 25 x 3 mm by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no 3 of SSR part I including Charcoal and rock salt with necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber Hinged to CI frame with MS bar 6mm dia 150mm c/c reinforcement, watering funnel with 15 mm dia medium grade GI pipe for watering and for protection of earth electrode 32 mm dia medium grade GI pipe all as specified and directed and tested on completion.

Boring of holes under road , pavement, hard standing by trenchless technology using ultra sound technique and necessary machinery including HDPE pipe of 200 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

Supply only following tools for day to day maintenance of electric dsitribution system :-

Self supporting cum extendable Aluminium Ladder of 12 feet extendable upto 21 feet.

Wall supported extendable aluminium ladder 16 feet extendable upto 30 feet

Crimping pliers to crimp the end sealing ferrules from 95 to 400 Sqmm

AC Power clamp on meter to measure KWH, KVA, KVAR Voltage

Motor operated insulation tester 5000 V, upto 10000M Ohm with carrying case and HV testing leads.

Motor operated insulation tester 2500 V, upto 10000M Ohm with carrying case and HV testing leads.

Earth resistance tester 0 to 2000 Ohm complete with 4 spikes 4 test leads, charging lead and carrying case

Electric operated drill for drilling in steel for 10 mm dia hole.

Electric operated blower for air volume 2.7 cu meter/min

Centrifuge machine complete with filter Heater, pump suitable for 230 V AC supply for capacity 500 Litre/hr.

Telestone type fibre glass discharge rod

Adjustable spanner conforming to IS -6149 of sizes 155 mm, 255mm, 305mm, 380 mm

Combination pliers conforming to IS 3650 of sizes 165 mm,185 mm, 210mm

Screw driver conforming to IS 844 of sizes 100 mm, 150 mm ,200mm, 250 mm, 300 mm

Hammer with handle (Ball pein and cross pein) of 200 gms, 340 gms, 500 gms weight confirming to IS-843

Double ended spanner (Plain) confirming to IS-2028 of size 6 x7 mm to 30x32 mm - 20 Nos

Allen Keys of size 4 mm , 6mm, 8mm, 10 mm, 14 mm & 17 mm

Electric rubber hand gloves 33 KV and above voltage grade

M& L for erection of vertically position steel tubular swaged poles complete with cast iron base plate,final taper plug,bolts,nuts & screws as specified type 410 SP-55(11.0 meters long) and applying three coats of black bituminous paint throughout internally and two coats externally on the pole embedded in concrete and applying two coat of zinc chrome primer to the exposed surface complete all as specified and as directed.

S & F High power LED Flood light fitting 150W complete on 11 mtr poles with IP protection 66 inculding all fixing arrangement such as nuts & bolts, clamps and 50x50x5 mm and 60 cm long angle iron bracket duly two coat super enameled paint over one coat of red oxide primer etc., complete all as specified and directed. Note: The cost of 01 run of connecting copper cable 03X1.5 Sqmm 1100 Volts grade FRLSH and all fixing accessories are deemed to be included in the unit price.

Supply, Installation, Testing and commissioning of indoor, metal enclosed corrosion proof aluminium alloy Gas Insulated Switchgear (GIS) 145 KV, 3 Phase, 50 HZ, 2500 Amps, three phase encapsulated consisting of 2 Nos Incomer feeder bays and 2 Nos outgoing transformer bays including installation tools, spares, refill kits all as specified and accessories as per details mentioned in ANNEXURE - C of BOQ complete all as specified and as detailed below: NOTE : (i) ANNEXURE - C has been uploaded separately alongwith tender documents and is part of BOQ for all purposes. MAKES : ABB/ CG/Siemens/ GE

Supply, Installation, Testing and Commissioning of Control & Relay Simplex type panel (CRP) with front swing & front perplex glass door RAL7035 natural IP 32 ventilation for 132 KV incoming line feeder bay consist of the following: Makes: ABB/ Schneider/SIEMENS/ CG a) Main-I Numerical Line Differential Protection Relay with inbuilt on IEC61850 protocol – 1 No ( MAKE : Schneider MiCOM P543 or its equivalent in ABB/SIEMENS b) Numerical Backup Protection Relay – 1 No ( MAKE : Schneider Easergy P5 [HV/LV] or its equivalent in ABB/SIEMENS c) Auxiliary Relay - with self-reset contacts. Operating time<20ms. (4 Contacts) – 3 Nos ( MAKE : Schneider RAAS4 or its equivalent in ABB/ SIEMENS. d) DC/AC Supply Supervision - 200ms<drop off time<400ms, 4 contacts – 2 Nos ( MAKE : Schneider VD1X or its equivalent in ABB/ SIEMENS e) Trip Circuit Supervision - 200ms<drop off time<400ms, 2 contacts – 3 Nos. ( MAKE : Schneider VD3X or its equivalent in ABB/ SIEMENS f) Master Trip Relay with hand reset contacts & following flag. Low Burden. Operating time<10ms.(8 Contacts) – 1 No ( ( MAKE : Schneider BAXBH16 or its equivalent in ABB/ SIEMENS/ALSTOM) g) Tri Vector Meter - with ABT & RS485 (modbus) port, Accuracy class 0.2 S- 1 No ( MAKE : SECURE PREMIER 300 or its equivalent in ABB/ SIEMENS) h) Panel Accesories.

Supply, Installation, Testing and Commissioning of Control & Relay Simplex type panel (CRP) with front swing & front perplex glass door RAL7035 natural IP 32 ventilation for 132 KV/ 33KV transformer protection consisting of the following: Makes: ABB/ Schneider/SIEMENS/ CG a) Numerical Transformer Differential Protection Relay – 1 No (MAKE : Schneider MiCOM P642 or its equivalent in ABB/ SIEMENS) b) Numerical Backup Protection Relay – 1 No (MAKE : Schneider Easergy P5 [HV/LV] or its equivalent in ABB/ SIEMENS c) Auxiliary Relay - with self-reset contacts. Operating time<20ms. (4 Contacts) – 5 Nos ( MAKE : Schneider RAAS4 or its equivalent in ABB/ SIEMENS d) DC/AC Supply Supervision - 200ms<drop off time<400ms, 4 contacts – 2 Nos ( MAKE : Schneider VD1X or its equivalent in ABB/ SIEMENS e) Trip Circuit Supervision - 200ms<drop off time<400ms, 2 contacts – 3 Nos. ( MAKE : Schneider VD3X or its equivalent in ABB/ SIEMENS f) Master Trip Relay with hand reset contacts & following flag. Low Burden. Operating time<10ms.(8 Contacts) – 2 No ( MAKE : Schneider BAXBH8 or its equivalent in ABB/ SIEMENS/ALSTOM g) Tri Vector Meter - with ABT & RS485 (modbus) port, Accuracy class 0.2 S- 2 No ( MAKE : SECURE PREMIER 300 or its equivalent in ABB/ SIEMENS) h) TTB 4W - Test Terminal Block 3 Phase 4 Wire i) Panel Accessories

Supply, Installation, Testing and Commissioning of 145 KV 630A 40 KA Oil filled outdoor termination with composite insulator, solid rod connector bolt and support insulators for cables with XLPE insulation. The termination base plate and the cable's metallic sheath shall be electrically insulated from the supporting structure by means of self-supporting stand-off insulators or any other self-supporting means designed to withstand both mechanical and electrical stresses in services. The stress cone shall inhibit possible mechanical stress and deformation of the cable insulation surface during operation and also shall be capable of accommodating minor radial and longitudinal movement without determent to the dielectric stress in the insulation shield. The termination shall be within polymeric or porcelain hollow insulator in brown or grey colour as per standard practice of manufacturing in addition upon, arcing horn and shield ring shall have to be supplied wherever required. The termination shall be filled with an insulating compound up to a level where the electric field is substantially reduced and shall be offered. Oil filled termination should have silicon oil as di-electric medium. Silicon oil should not be subject to any heating at site prior to filling. The outdoor terminal should be suitable for very heavily polluted atmospheric conditions with total creepage distance of 31 mm/ kV and protected creepage distance of not more than 50% of the total Creepage distance. The cable end terminals for terminating the cables shall be fully compatible with the cables to be supplied complete all as specified and directed. NOTE: Civil foundation / Supporting Strcuture etc and general works which are required as per site/technically required to achieve optimum efficency are to be supplied by the contractor for which rate is deemed to be included in the unit rate quoted.

Supply, Installation, testing & commissioning of HT 33KV VCB line up of Eight panels switchboard consisting of (a) 1250 A, VCB 33 KV – 2 Nos as incomer (b) Bus coupler cum Bus Riser 1250 A VCB 33 KV-1 No and (c) 1250 A VCB 33 KV - 5 Nos as outgoing. VCB panel shall be indoor type totally enclosed, free standing floor mounting type, compartment based with truck mounted vacuum circuit breaker, spring operated, electrically and manually charged operating mechanism suitable for horizontal isolation, horizontal draw out type VCBs with copper bus bars. Self supported Insulated Busbar with full voltage rated should be used. Complete VCB panel confirming to IEC 62271-200 standards and IP 54 class of protection comprising necessary bus-bars extension and connections and protective and control devices as specified in ANNEXURE - D of BOQ complete all as specified and as detailed below: NOTE:- (i) ANNEXURE - D has been uploaded separately alongwith tender documents and is part of BOQ for all purposes. MAKES : ABB/CG/SCHNEIDER/SIEMENS/ M/s Indian Transformers and electricals Pvt Ltd

Supply, Installation, Testing and Commissioning of Three Phase 4 Wire 110V/50A FCBC Thristor based with in-built DCDB and RS485 communication Suitable for and including 110 V/ 200 AH VRLA Battery with 55 cells, 2V each with all connected accessories complete all as specified and as directed.

Supply, Installation, Testing and Commissioning of 48V/20A FCBC Thristor based with in-built DCDB and RS485 communication ,Three Phase 4Wire, Full Wave, Full Controlled, Thyrister based Charger with VRLA battery complete all as specefied and directed.

Supply, lay, testing and commissioning of cable 33 KV(E) XLPE CABLE grade cable of 3 Core 240 Sqmm suitable for earthed system having compacted circular stranded aluminium conductor shielded with semi-conducting compound extruded layer XLPE insulated dry cured core shielded with semi-conducting compound extruded layer followed by metallic copper foil, screened inner sheath of extruded PVC, galvanized single flat steel strip armoured and PVC sheathed overall conforming to IS: 7098/Part-II/1985, as amended upto date with ISI marked of 3 Core 240 Sqmm in VCV/CCV manufacturing process ,complete all as specified and directed

Supply, lay, testing and commissioning of cable 33KV(E) XLPE CABLE grade cable of 3 Core 300 Sqmm suitable for earthed system having compacted circular stranded aluminium conductor shielded with semi-conducting compound extruded layer XLPE insulated dry cured core shielded with semi-conducting compound extruded layer followed by metallic copper foil, screened inner sheath of extruded PVC, galvanized single flat steel strip armoured and PVC sheathed overall conforming to IS: 7098/Part-II/1985, as amended upto date with ISI marked of 3 Core 300 Sqmm in VCV/CCV manufacturing process.

Cable jointing kit for 33 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 240 Sqmm 3 core complete all as specified and directed.

Cable jointing kit for 33 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 3 Core 240 Sqmm complete all as specified and directed.

Cable jointing kit for 33 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 3 Core 300 Sqmm complete all as specified and directed.

Cable jointing kit for 33 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 3 Core 240 Sqmm complete all as specified and directed.

Cable jointing kit for 33 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 3 Core 300 Sqmm complete all as specified and directed.

Supply, laying & testing of 11KV(E) XLPE insulated cable of size 3 Core 120 Sqmm suitable for earthed system having compacted circular stranded aluminium conductor shielded with semi-conducting compound extruded layer XLPE insulated dry cured core shielded with semi-conducting compound extruded layer followed by metallic copper foil, screened inner sheath of extruded PVC, galvanized single flat steel strip armoured and PVC sheathed overall conforming to IS: 7098/Part-II/1985, amended upto date with ISI marked of size 3 Core 120 Sqmm in VCV/CCV manufacturing process, complete all as specified and as directed.

Supply, laying & testing of 11KV(E) XLPE insulated cable of size 3 Core 240 Sqmm suitable for earthed system having compacted circular stranded aluminium conductor shielded with semi-conducting compound extruded layer XLPE insulated dry cured core shielded with semi-conducting compound extruded layer followed by metallic copper foil, screened inner sheath of extruded PVC, galvanized single flat steel strip armoured and PVC sheathed overall conforming to IS: 7098/Part-II/1985, amended upto date with ISI marked of size 3 Core 240 Sqmm in VCV/CCV manufacturing process, complete all as specified and as directed.

Supply, laying & testing of 11KV(E) XLPE insulated cable of size 3 Core 400 Sqmm suitable for earthed system having compacted circular stranded aluminium conductor shielded with semi-conducting compound extruded layer XLPE insulated dry cured core shielded with semi-conducting compound extruded layer followed by metallic copper foil, screened inner sheath of extruded PVC, galvanized single flat steel strip armoured and PVC sheathed overall conforming to IS: 7098/Part-II/1985, amended upto date with ISI marked of size 3 Core 400 Sqmm in VCV/CCV manufacturing process, complete all as specified and as directed.

Design, Supply, Installation, Testing and Commissioning of energy management system/ substation automation system with suitable software capable of taking care of complete data monitoring, data logging and control functions at 132 MRS consisting of 4 Nos 132 KV GIS, 8 Nos HT 33 KV VCBs at MRS, 6 Nos 33 KV VCB switch gear at Command Swimming pool and other allied switchgears complete with servers, work stations, desk top computers, operating system, communication products and object software's assembled from industry standard products, complete all as specified and directed and accessories as per details mentioned in ANNEXURE - E of BOQ complete all as specified and as detailed below: NOTE:- (i) ANNEXURE - E has been uploaded separately alongwith tender documents and is part of BOQ for all purposes. Make:-Hitachi / ABB/ Siemens/ GE/Schneider

Brick masanory soak pit for transformer oil semi under ground of internal size 5 Mtr x 5 mtr and 2 mtr deep externally plastered above ground level and internally plastered, including provision of MS chequered plate cover 5mm thick including stiffener members made of angle iron and expoxy paiting to the MS channgels/angle and covers complete incl vent pipe 0.5 mtr, 50mm dia complete all as specified and directed.Note: Soak pit to be constructed on pile foundation, piling along with pile cap is considered. Base foundation above pile cap required.

Supply and fixing in position Retardant/ extinguishing electric insulated synthetic mat 2.5 mm (+/-) 10% thick conforming to BIS -DOC No ET-02 (540) dt 30/04/2004, meeting requirements of IS- 3043, IS-5216 (Part-1, 2 & 3), IS-15652:2006 and IEC 479 Pub-I tested having minimum width of 1000 mm (+/-) 20 mm. All allied materials such as PU-Resin Chemical bond (hardener), special PVC adhesive liquid primer and qty required to complete the job as per site requirement suitable for all voltages not exceeding 33/11 KV system complete all as specified and directed.

RCC cable route indicator semi-circular shape on top of size 600x450x100 mm casted in PCC 1:3:6 with TMT bar of size 10 mm dia and foundation base casted in RCC 1:2:4, grouted in earth upto 550 mm duly engraved the following letters "HT UG CABLE" with two coats of antifungal weather coat paint, etc complete all as specified and directed.

Display chart (set of 2 nos) of size 5' x 4' duly made on white polyvinyl sheet exactly showing the locations of the yard and the machineries and equipments installed in the sub-station duly marked properly with legends etc, and a separate chart showing the details of machineries installed with nos, capacity/ rating and make with computer cutting letters of approved size on poly vinyl sheet complete all as specified and directed.

Display chart (set of 2 nos) of size 6' x 5' duly made on white polyvinyl sheet exactly showing the lay out of transmission and distribution of HT UG cable routes, locations of the HT Joints, drawn on autocad, etc duly marked properly with legends, with computer cutting letters of approved size on poly vinyl sheet, complete all as specified and directed.

Shock treatment chart duly laminated with wooden frame enclosure , complete all as specified and directed.

Rolled miled steel plates (plain or chequred), channels, angle iron, spare cut or niotched ordinary and counter sunk) forming holes, without any detachement all as directed conforming to Fe-410-0 or Fe-310-0 including appling two coats of synthetic enamel paint over a coat of ant-corrosive red-oxide, zinc chrome primer,complete all as specified and directed.

First aid GI box containing prescribed medicines for first aid box as per standard quality and quantity each as required to provide first aid treatment in an emergency ,complete all as specified and directed.

Supply, Installation, Testing and Commissioning of copper wound Power transformer step down outdoor type 33/11 KV, 8/12 MVA, ONAN/ONAF,Vector group Dyn 11 with onload tap changing gear (+) 5% to (-)15% in steps of 1.25% on HV side, with HV/LV Cable Box and all standard accessories as per IS 2026 and as specified in PS, including first fill of oil complete. comprising the following accessories:- a) Conservator Tank b) Pressure Relief Device c) Buchholz Relay d) Oil Surge Relay e) Oil Temperature Indicator (OTI) f) Winding Temperature Indicator (WTI) g) Oil Preservation Equipment like h) Oil Sealing j) Breather k) Aircell in conservator tank. l) Radiators and control valves m) Each radiator tank shall have its own cooling fans, shut off valves at the top and bottom. n) motor operated OLTC shall be o) On load tap changing with RTCC panel. p) Marshalling box q) Thermosphyn filter. r) NIFPS [Protection] s) The requisite foundation is a part of the item as recommended by Manufacturer and the cost of the same is deemed to be included in the part of the item. s) Necessary pit for collection of oil shall be provided as recommended by manufacturer and the cost of the same is also deemed to be included in the part of the item. Make:- ABB/ Siemens/BHEL/ GE/ Schneider/CG/ Voltamp

Supply, Installation, testing & commissioning of HT 33 KV VCB line up Six panels switchboard consisting of (a) 1250A, VCB 33 KV – 2 Nos as incomer (b) Bus coupler cum Bus Riser 1250A VCB 33 KV-1 No and (c) 1250 A VCB 33 KV - 3 Nos as outgoing. VCB panel shall be indoor type totally enclosed, free standing floor mounting type, compartment based with truck mounted vacuum circuit breaker spring operated electrically and manually charged operating mechanism suitable for horizontal isolation, horizontal draw out type VCBs with copper bus bars. Self supported Insulated Busbar with full voltage rated should be used. Complete VCB panel confirming to IEC 62271-200 standards and IP 54 class of protection comprising necessary bus-bars extension and connections and following protective and control devices as specified in ANNEXURE - F of BOQ complete all as specified and as detailed below: NOTE:- (i) ANNEXURE - F has been uploaded separately alongwith tender documents and is part of BOQ for all purposes. MAKES : ABB/CG/SCHNEIDER/SIEMENS/ M/s Indian Transformers and electricals Pvt Ltd

Supply, Installation, testing & commissioning of HT 11 KV, 25 kA, VCB line up 14 panels switchboard consisting of (a) 1250 Amps, VCB 11 KV - 02 Nos as Incomer, (b) Bus coupler 1250 Amps VCB 11 KV -1 Nos , (c) Outoing 1250A VCB 11 KV - 11 Nos. VCB panel shall be indoor type totally enclosed, free standing floor mounting type, compartment based with truck mounted vacuum circuit breaker spring operated electrically and manually charged operating mechanism suitable for horizontal isolation, horizontal draw out type VCBs with copper bus bars. Self supported Insulated Busbar with full voltage rated should be used. The switchgear panel shall be of sheet steel construction not less than 2.5mm thickness for load bearing section and not less than 2 mm thickness for non-load bearing and shall totally dust and vermin proof. Complete VCB panel confirming to IEC 62271-200 standards and IP 54 class of protection comprising necessary bus-bars extension and connections and following protective and control devices as specified below. Circuit Breaker shall be suitable for E2, M2 & C2 duty complete all as specified and as directed and comprising of accessories mentioned in ANNEXURE - G of BOQ complete all as specified and as detailed below: NOTE:- (i) ANNEXURE - G has been uploaded separately alongwith tender documents and is part of BOQ for all purposes. MAKES : ABB/CG/SCHNEIDER/SIEMENS/ M/s Indian Transformers and electricals Pvt Ltd

Design, Supply, Installation, testing & commissioning of 2 way 11 KV, 630 Amps, 21 kA / 3 Sec Extensible outdoor VCB with Copper Busbar, consisting of 1 No 630 Amps Manual/Motorised for incoming and outgoing. All live parts, bus bars, bus bars IP 67 degree of protection should be enclosed in tank to avoid multiple inter connections & sealed for life welded four sides with minimum 2 mm Thickness stainless steel tank with IP 67 degree of protection complete all as specified and directed including accessories complete all as specified and as detailed below: Make:- ABB/ Siemens/ GE/ Schneider/Lucy/CG/ M/s Indian Transformers and electricals Pvt Ltd

Supplying, Installing, Connecting, Commissioning and Testing of Transformer, Step Down, Outdoor Type, Floor or Platform Mounted complete with standard fittings, 11 KV / 433 V [at No load], AC, 3 Phase, 50 Hz, of 100 KVA capacity, Double Copper Wound, Oil immersed, CRGO Core type Naturally cooled, Built-up with class "A" insulation, having Primary Voltage [HT] 11 KV and Secondary Voltage [LT] of 433 Volts, Delta connected on 11 KV Side & Star connected on 433 Volts side, designed & constructed with particular reference to Tropical Condition, conforming to IS – 1180-2014, Level-2 with latest amendment including PCC / Brick Masonry Foundation / Platform as per IE Rules, fixing HT / LT Busbar and Cables etc. complete all as specified and as directed and comprising of accessories mentioned in ANNEXURE - H of BOQ complete all as specified and as detailed below: NOTE:- (i) ANNEXURE - H has been uploaded separately alongwith tender documents and is part of BOQ for all purposes.

Loop in loop out box of FRP made with IP 65 protection of thermoplastic circuit breaker boxes with metric knockouts for cable entry and exit, combi climate cable glands of IP 66/ IP 67 for cable entry and grommets IP 65 for conduit for cable exit with MCB 6 Amps, 10 kA, C curve overload and short circuit protection, terminals as bus terminals for cable with necessary fixing arrangements and with cable glands, etc complete all as specified and directed.

Supply and fixing spring loaded aluminium clamps suitable for HV & EHV cables of size Single Core 630 Sqmm 132 KV Aluminium cable inculding all necessary items to fix such as nuts, bolts, washers etc. and all fixing arrangements as required at site, complete all as specified and directed.

Supply and fixing spring loaded aluminium clamps suitable for HV & EHV cables of size Three Core 300 Sqmm 33 KV Aluminium cable inculding all necessary items to fix such as nuts, bolts, washers etc. and all fixing arrangements as required at site, complete all as specified and directed.

Supply and fixing spring loaded aluminium clamps suitable for HV & EHV cables of size Three Core 240 Sqmm 33 KV Aluminium cable inculding all necessary items to fix such as nuts, bolts, washers etc. and all fixing arrangements as required at site, complete all as specified and directed.

Supply, laying & testing of XLPE insulated multistranded copper conductor three core, 11000 Volts grade [E] armoured cable of size 240 Sqmm including connecting up with suitable size copper lugs, nuts, bolts, washers, etc complete all as specified and directed.

survey, site inspection, layout design and location identification for complete earthing/earth mat layouting for best result depending on the soil condition at the site of 132KV yard complete all as specified and directed.

brick massonary in cement mortar 1:4 of internal size 1000 x 1000 x 800mm for man hole in control cable routes including plastering with cement mortar 1:6 10MM thick internally and externally 150mm below the G.L. with 1:6 cement mortar 15mm thick, PCC 1:4:8 type D2 by using 40mm gradded aggregate foundation of size 1550x1550 mm of 150mm thick and PCC 1:3:6 for coping of 50mm thick and covering the chamber with 40X40X4 mm thick angle iron frame and 10cm thick RCC slab with type B0 1:2:4 concrete with 12.5mm graded aggregate as cover with handles made out of MS round bar 10 mm dia for lifting slabs including painting to the angle iron with two coats of synthetic enamel paint over a coat of redoxide primer and white wash for the man hole complete all as specified and directed.

Brick massonary in cement mortar 1:4 of internal size 1500 x 1500 x 1400mm for man hole in control cable routes including plastering with cement mortar 1:6 10MM thick internally and externally 150mm below the G.L. with 1:6 cement mortar 15mm thick, PCC 1:4:8 type D2 by using 40mm gradded aggregate foundation of size 1550x1550 mm of 150mm thick and PCC 1:3:6 for coping of 50mm thick and covering the chamber with 40X40X4 mm thick angle iron frame and 10cm thick RCC slab with type B0 1:2:4 concrete with 12.5mm graded aggregate as cover with handles made out of MS round bar 10 mm dia for lifting slabs including painting to the angle iron with two coats of synthetic enamel paint over a coat of redoxide primer and white wash for the man hole complete all as specified and directed.

SCHEDULE 'A' PART-XVII PHASE -II Outsourcing for sub station for the First 11 Months during Defect Liability Period .

Manning and operation for 132/33 KV sub station at Dolphin hills by providing one high skilled operator [having relevant experience] & one skilled operator complete in 08 hours of each shift on all the days including Sunday & holidays in three shifts a day complete all as specified and as directed.

Manning and operation for 33/11 KV sub station at Command swimming pool by providing skilled operator [having relevant experience] & one Semi-skilled operator complete in 08 hours of each shift on all the days including Sunday & holidays in three shifts a day complete all as specified and as directed.

SCHEDULE 'A' PART-XVIII PHASE -III Outsourcing for sub station for the Second 11 Months during Defect Liability Period .

Manning and operation for 132/33 KV sub station at Dolphin hills by providing one high skilled operator [having relevant experience] & one skilled operator complete in 08 hours of each shift on all the days including Sunday & holidays in three shifts a day complete all as specified and as directed.

Manning and operation for 33/11 KV sub station at Command swimming pool by providing skilled operator [having relevant experience] & one Semi-skilled operator complete in 08 hours of each shift on all the days including Sunday & holidays in three shifts a day complete all as specified and as directed.

SCHEDULE 'A' PART-XIX PHASE -IV Outsourcing for sub station for the balance 02 Months after 22 months during Defect Liability Period .

Manning and operation for 132/33 KV sub station at Dolphin hills by providing one high skilled operator [having relevant experience] & one skilled operator complete in 08 hours of each shift on all the days including Sunday & holidays in three shifts a day complete all as specified and as directed.

Manning and operation for 33/11 KV sub station at Command swimming pool by providing skilled operator [having relevant experience] & one Semi-skilled operator complete in 08 hours of each shift on all the days including Sunday & holidays in three shifts a day complete all as specified and as directed.

Note for Item No. 138 to 143:- [i] The operator shall maintain log sheet for respective sub-stations as directed. [ii] The operator shall monitor all monitors and inform concerned if anything happens in the circuit all as directed. [iii] Contractor shall laise with command swimming pool sub-station/ Dolphin hill in case of major breakdown for early restore of supply. [iv] Conveyance and communication system like mobile phone etc., shall be provided by the contractor. [v] The contractor shall abide by the latest labour rules and minimum wages Act. Wages paid by the contractor to the emplopyed persons shall not be less than minimum wages fixed by the state/ central Govt from time to time whichever is higher. [vi] The contractor shall also insure employede workmen on th job. [vii] The contractor is responsible for insurance, EPF, ESI, labour welfare cess etc., as applicable and shall be paid to the workmen as per existing Rules/ Acts/ regulations etc., and quoted is deemed to include the same.

SCHEDULE 'A' PART-XX PHASE -V Outsourcing for SCADA system for the First 11 Months after Defect Liability Period .

Operation and comprehensive maintenace of GSM based SCADA located in restricted area through OEM which includes RTUs, connecting OFC cables, Fibre/ Ethernet switch, LFMS, SCADA software, various monitors, Processors etc.,complete all as specified and as directed.

SCHEDULE 'A' PART-XXI PHASE -VI Outsourcing for SCADA system for the Second 11 Months after Defect Liability Period .

Operation and comprehensive maintenace of GSM based SCADA located in restricted area through OEM which includes RTUs, connecting OFC cables, Fibre/ Ethernet switch, LFMS, SCADA software, various monitors, Processors etc.,complete all as specified and as directed.

SCHEDULE 'A' PART-XXII PHASE -VII Outsourcing for SCADA system for the Third 11 Months after Defect Liability Period .

Operation and comprehensive maintenace of GSM based SCADA located in restricted area through OEM which includes RTUs, connecting OFC cables, Fibre/ Ethernet switch, LFMS, SCADA software, various monitors, Processors etc.,complete all as specified and as directed.

SCHEDULE 'A' PART-XXIII PHASE -VIII Outsourcing for SCADA system for the Fourth 11 Months after Defect Liability Period .

Operation and comprehensive maintenace of GSM based SCADA located in restricted area through OEM which includes RTUs, connecting OFC cables, Fibre/ Ethernet switch, LFMS, SCADA software, various monitors, Processors etc.,complete all as specified and as directed.

SCHEDULE 'A' PART-XXIV PHASE -IX Outsourcing for SCADA system for the Fifth 11 months after Defect Liability Period .

Operation and comprehensive maintenace of GSM based SCADA located in restricted area through OEM which includes RTUs, connecting OFC cables, Fibre/ Ethernet switch, LFMS, SCADA software, various monitors, Processors etc.,complete all as specified and as directed.

SCHEDULE 'A' PART-XXV PHASE -X Outsourcing for SCADA system for the Sixth 11 months after Defect Liability Period .

Operation and comprehensive maintenace of GSM based SCADA located in restricted area through OEM which includes RTUs, connecting OFC cables, Fibre/ Ethernet switch, LFMS, SCADA software, various monitors, Processors etc.,complete all as specified and as directed.

SCHEDULE 'A' PART-XXVI PHASE -XI Outsourcing for SCADA system for the Seventh 11 months after Defect Liability Period .

Operation and comprehensive maintenace of GSM based SCADA located in restricted area through OEM which includes RTUs, connecting OFC cables, Fibre/ Ethernet switch, LFMS, SCADA software, various monitors, Processors etc.,complete all as specified and as directed.

SCHEDULE 'A' PART-XXVII PHASE -XII Outsourcing for SCADA system for the Eighth 11 months after Defect Liability Period .

Operation and comprehensive maintenace of GSM based SCADA located in restricted area through OEM which includes RTUs, connecting OFC cables, Fibre/ Ethernet switch, LFMS, SCADA software, various monitors, Processors etc.,complete all as specified and as directed.

SCHEDULE 'A' PART-XXVIII PHASE -XIII Outsourcing for SCADA system for the balance 08 months after completion of Phase XII .

Operation and comprehensive maintenace of GSM based SCADA located in restricted area through OEM which includes RTUs, connecting OFC cables, Fibre/ Ethernet switch, LFMS, SCADA software, various monitors, Processors etc.,complete all as specified and as directed.

K KUMAR RAJA PROJECTS P LIMITED

M K ENGINEERS CO.

FRIZO INDIA PVT LTD

Om Parkash Nargotra Constructions Pvt Ltd

SOOD ASSOCIATES PVT LTD

Shekhar Enterprises