Construction of Rural Police Station (G+2) at Panvad Dist Chhotaudepur (Including Concelled Electrification) [1st Attempt]

No. InFigure In Words Rs.

1 Excavation for foundation upto 1.5 Mt. depth including sorting out and stacking of 714.00 Cum. 124.61 Rs. One Hundred Twenty

useful materials and disposing of the excavated stuff for all lead and lift. [[B]Loose or Four & Paise Sixty One

2 Excavation for foundation upto 1.5 Mt. depth including sorting out and stacking of 477.00 Cum. 159.30 Rs. One Hundred Fifty Nine

useful materials and disposing of the excavated stuff for all lead and lift. [[B]Dense & Paise Thirty Only

and Hard Soil

3 Excavation for foundation upto 1.5 Mt. to 3.0 mt depth including sorting out and 401.00 Cum. 172.83 Rs. One Hundred Seventy

stacking of useful materials and disposing of the excavated stuff for all lead and lift. Two & Paise Eighty Three

[[B]Dense and Hard Soil

4 Excavation for foundation upto 3.0 Mt. to 5.0 mt depth including sorting out and 134.00 Cum. 304.12 Rs. Three Hundred Four &

stacking of useful materials and disposing of the excavated stuff for all lead and lift. Paise Twelve Only

[[B]Dense and Hard Soil

5 Providing and laying cement concrete 1:2:4 (1-cement:2-coarse sand:4-stone 7.00 Cum. 3650.89 Rs. Three Thousand Six

aggregates 20mmof nominal size) and curing etc.complete including cost of Hundred Fifty & Paise

Eighty Nine Only

formwork in Foundation & Plinth

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

6 Providing & laying CEMENT CONCRETE 1:3:6 ( 1cement : 3 coarse sand : 6 broken 82.00 Cum. 3075.91 Rs. Three Thousand

stone aggregate 40 mm nominal size) and curing etc.complete including cost of Seventy Five & Paise

Ninety One Only

formwork in Foundation & Plinth

7 Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand , 8 graded 74.20 Cum. 2753.58 Rs. Two Thousand Seven

machine broken stone aggregate 40mm nominal size ) and curing etc.complete Hundred Fifty Three &

Paise Fifty Eight Only

including cost of formwork in Foundation & Plinth

8 Provinding & laying controlled cement concrete M-200 & finishing smooth with 0.90 Cum. 3999.02 Rs. Three Thousand Nine

curing including of formwork reinforcement for RCC Work in Foundation & Plinth. Hundred Ninety Nine &

Paise Two Only

Rate are also inclusive of providing and mixing Plasticizer of approved make in

proportion prescribed by manufacture.

9 Providing & laying Controlled CEMENT CONCRETE M-250 and curing complete 283.00 Cum. 4612.76 Rs. Four Thousand Six

including cost of formwork Plywood only with fair finish & Proping must be of steel Hundred Twelve & Paise

Seventy Six Only

only so as to give fair finish but excluding the cost of reinforcement in Column

FOOTING base of columns and Mass concrete. Rate are also inclusive of providing

and mixing Plasticiser of approved make in proportion as per mix design .

10 Providing & laying Controlled CEMENT CONCRETE M-250 and curing complete 50.00 Cum. 8983.79 Rs. Eight Thousand Nine

including cost of formworkof Plywood only with fair finish & Proping must be of steel Hundred Eighty Three &

Paise Seventy Nine Only

only so as to give fair finish but excluding the cost of reinforcement in COLUMN upto

PLINTH for any cross sectional area of column. Rate are also inclusive of providing

and mixing Plasticiser of approved make in proportion as per mix design .

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

11 Providing and laying Controlled cement concrete M-250 and finishing smooth with 56.80 Cum. 7261.10 Rs. Seven Thousand Two

curing etc.. complete including the cost of formworkof Plywood only with fair finish & Hundred Sixty One & Paise

Proping must be of steel only so as to give fair finish but exculding the cost of

reinforcement for PLINTH BEAMS of any cross sectional area of beam. Rate are also

inclusive of providing and mixing Plasticiser of approved make in proportion as per

mix design .

12 Filling available excavated earth (excluding rock) in trenches. plinth, sides 1309.00 Cum. 136.11 Rs. One Hundred Thirty Six

of foundations etc. in layers not exceeding 20 cm. in depth consolidating each & Paise Eleven Only

disposited layer by ramming and watering.

not exceeding 20cms.In depth consolidating each deposited layer by ramming and Paise Fifty Eight Only

14 Supplying and Filling in plinth with sand under floors including watering, ramming, 49.00 Cum. 484.44 Rs. Four Hundred Eighty

consolidation and dressing etc.complete Four & Paise Forty Four

15 Applying general insecticide Pest control treatment to floors, cupboards etc 478.00 Smt 48.76 Rs. Forty Eight & Paise

including labour materials etc.complete. Using Imidacloprid 30.5 SCas Per IS 6313 Seventy Six Only

part -II( (0.075% concentration by mass) is recommended 10.5ml chemical diluted

with 5 liters of water application 0.5 litre chemical /Sqm of surface is recommended

as per I.S.

16 Providing and laying cement concrete 1:5:10 (1-cement;5-coarse sand;10-graded 37.00 Cum. 2592.41 Rs. Two Thousand Five

brick aggregate of 40mm nominal size) and curing etc.complete including cost of Hundred Ninety Two &

Paise Forty One Only

formwork in foundation and plinth.

17 Provinding and laying 400 micron polythene Sheet at plinth level under CC for water 509.00 Smt 49.07 Rs. Forty Nine & Paise

proofing treatment etc complete as directed by Engineer In Charge. Seven Only

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

18 Providing & laying Controlled CEMENT CONCRETE M-150 and curing complete 52.00 Cum. 3986.32 Rs. Three Thousand Nine

including the cost of formwork of Plywood only with fair finish & Proping must be of Hundred Eighty Six & Paise

Thirty Two Only

steel only so as to give fair finish but excluding the cost of reinforcement in Rcc

Grade Slab. Rate are also inclusive of providing and mixing Plasticiser of approved

make in proportion as per mix design .

19 Providing and laying controlled cement concrete M-250 including the cost of 20.00 Cum. 6060.00 Rs. Six Thousand Sixty Only

formworkof Plywood only with fair finish & Proping must be of steel only so as to give

fair finish but excluding the cost of reinforcement for R.C.C. COPING. Rate are also

inclusive of providing and mixing Plasticiser of approved make in proportion as per

mix design .

20 Providing & Laying Controlled Cement Concrete M-250 andincluding the cost of 33.00 Cum. 10863.89 Rs. Ten Thousand Eight

formworkof Plywood only with fair finish & Proping must be of steel only so as to give Hundred Sixty Three &

Paise Eighty Nine Only

fair finish but excluding cost of the reinforcement for RCC Work etc complete For

Column at Ground Floor for any cross sectional area. Rate are also inclusive of

providing and mixing Plasticiser of approved make in proportion as per mix design .

21 Providing & Laying Controlled Cement Concrete M-250 and including the cost of 35.00 Cum. 10903.90 Rs. Ten Thousand Nine

formwork of Plywood only with fair finish & Proping must be of steel only so as to Hundred Three & Paise

Ninety Only

give fair finish but excluding cost of the reinforcement for RCC Work etc complete

For Column at First Floor for any cross sectional area. Rate are also inclusive of

providing and mixing Plasticiser of approved make in proportion as per mix design .

22 Providing & Laying Controlled Cement Concrete M-250 and including the cost of 44.00 Cum. 10943.91 Rs. Ten Thousand Nine

formworkof Plywood only with fair finish & Proping must be of steel only so as to give Hundred Forty Three &

Paise Ninety One Only

fair finish but excluding cost of the reinforcement for RCC Work etc complete For

Column at Second Floor for any cross sectional area. Rate are also inclusive of

providing and mixing Plasticiser of approved make in proportion as per mix design .

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

23 Providing & Laying Controlled Cement Concrete M-250 and including the cost of 6.00 Cum. 10983.92 Rs. Ten Thousand Nine

formworkof Plywood only with fair finish & Proping must be of steel only so as to give Hundred Eighty Three &

Paise Ninety Two Only

fair finish but excluding cost of the reinforcement for RCC Work etc complete For

Column at Third Floor for any cross sectional area. Rate are also inclusive of

providing and mixing Plasticiser of approved make in proportion as per mix design .

24 Providing & Laying Controlled Cement Concrete M-250 and including the cost of 3.00 Cum. 11023.93 Rs. Eleven Thousand

formworkof Plywood only with fair finish & Proping must be of steel only so as to give Twenty Three & Paise

Ninety Three Only

fair finish but excluding cost of the reinforcement for RCC Work etc complete For

Column at Fourth Floor for any cross sectional area. Rate are also inclusive of

providing and mixing Plasticiser of approved make in proportion as per mix design .

25 Providing & Laying Controlled Cement Concrete M-250 andincluding the cost of 43.00 Cum. 9096.50 Rs. Nine Thousand Ninety

formworkof Plywood only with fair finish & Proping must be of steel only so as to give Six & Paise Fifty Only

fair finish but excluding cost of the reinforcement for RCC Work etc complete for

BEAM at Ground floor for any cross sectional area.Rate are inclusive of Providing

and Mixing Plasticiser in cement concrete as per mix design

26 Providing & Laying Controlled Cement Concrete M-250 andincluding the cost of 38.00 Cum. 9136.51 Rs. Nine Thousand One

formworkof Plywood only with fair finish & Proping must be of steel only so as to give Hundred Thirty Six & Paise

Fifty One Only

fair finish but excluding cost of the reinforcement for RCC Work etc complete for

BEAM at First floor for any cross sectional area.Rate are inclusive of Providing and

Mixing Plasticiser in cement concrete as per mix design

27 Providing & Laying Controlled Cement Concrete M-250 andincluding the cost of 38.00 Cum. 9176.52 Rs. Nine Thousand One

formworkof Plywood only with fair finish & Proping must be of steel only so as to give Hundred Seventy Six &

Paise Fifty Two Only

fair finish but excluding cost of the reinforcement for RCC Work etc complete for

BEAM at Second floor for any cross sectional area.Rate are inclusive of Providing

and Mixing Plasticiser in cement concrete as per mix design

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

28 Providing & Laying Controlled Cement Concrete M-250 andincluding the cost of 4.00 Cum. 9216.53 Rs. Nine Thousand Two

formworkof Plywood only with fair finish & Proping must be of steel only so as to give Hundred Sixteen & Paise

Fifty Three Only

fair finish but excluding cost of the reinforcement for RCC Work etc complete for

BEAM at Third floor for any cross sectional area.Rate are inclusive of Providing and

Mixing Plasticiser in cement concrete as per mix design

29 Providing & Laying Controlled Cement Concrete M-250 andincluding the cost of 4.00 Cum. 9256.54 Rs. Nine Thousand Two

formworkof Plywood only with fair finish & Proping must be of steel only so as to give Hundred Fifty Six & Paise

Fifty Four Only

fair finish but excluding cost of the reinforcement for RCC Work etc complete for

BEAM at Fourth floor for any cross sectional area.Rate are inclusive of Providing and

Mixing Plasticiser in cement concrete as per mix design

30 Providing and laying Controlled cement concrete M-250 finishing smooth with 5.00 Cum. 8162.56 Rs. Eight Thousand One

curing etc. completeincluding the cost of formworkof Plywood only with fair finish & Hundred Sixty Two & Paise

Fifty Six Only

Proping must be of steel only so as to give fair finish but exculding the cost of

reinforcement for R.C.C. work in SLAB having thickness of 10cm. and upto 13 cms.

for GROUND FLOOR Rate are also inclusive of providing and mixing Plasticiser of

approved make in proportion as per mix design .

31 Providing and laying Controlled cement concrete M-250 finishing smooth with 91.60 Cum. 7735.86 Rs. Seven Thousand Seven

curing etc. completeincluding the cost of formworkof Plywood only with fair finish & Hundred Thirty Five &

Paise Eighty Six Only

Proping must be of steel only so as to give fair finish but exculding the cost of

reinforcement for R.C.C. work in SLAB having thickness of 13cm. and upto 15 cms.

for GROUND FLOOR Rate are also inclusive of providing and mixing Plasticiser of

approved make in proportion as per mix design .

32 Providing and laying Controlled cement concrete M-250 finishing smooth with 77.00 Cum. 7775.87 Rs. Seven Thousand Seven

curing etc. completeincluding the cost of formworkof Plywood only with fair finish & Hundred Seventy Five &

Paise Eighty Seven Only

Proping must be of steel only so as to give fair finish but exculding the cost of

reinforcement for R.C.C. work in SLAB having thickness of 13cm. and upto 15 cms.

for FIRST FLOOR Rate are also inclusive of providing and mixing Plasticiser of

approved make in proportion as per mix design .

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

33 Providing and laying Controlled cement concrete M-250 finishing smooth with 69.00 Cum. 7815.88 Rs. Seven Thousand Eight

curing etc. completeincluding the cost of formworkof Plywood only with fair finish & Hundred Fifteen & Paise

Eighty Eight Only

Proping must be of steel only so as to give fair finish but exculding the cost of

reinforcement for R.C.C. work in SLAB having thickness of 13cm. and upto 15 cms.

for SECOND FLOOR Rate are also inclusive of providing and mixing Plasticiser of

approved make in proportion as per mix design .

34 Providing and laying Controlled cement concrete M-250 finishing smooth with 6.00 Cum. 7855.89 Rs. Seven Thousand Eight

curing etc. completeincluding the cost of formworkof Plywood only with fair finish & Hundred Fifty Five & Paise

Eighty Nine Only

Proping must be of steel only so as to give fair finish but exculding the cost of

reinforcement for R.C.C. work in SLAB having thickness of 13cm. and upto 15 cms.

for THIRD FLOOR Rate are also inclusive of providing and mixing Plasticiser of

approved make in proportion as per mix design .

35 Providing and laying Controlled cement concrete M-250 finishing smooth with 6.00 Cum. 7895.90 Rs. Seven Thousand Eight

curing etc. completeincluding the cost of formworkof Plywood only with fair finish & Hundred Ninety Five &

Paise Ninety Only

Proping must be of steel only so as to give fair finish but exculding the cost of

reinforcement for R.C.C. work in SLAB having thickness of 13cm. and upto 15 cms.

for FOURTH FLOOR Rate are also inclusive of providing and mixing Plasticiser of

approved make in proportion as per mix design .

36 Providing & Laying Controlled Cement Concrete M-250 and including the cost of 6.00 Cum. 8801.00 Rs. Eight Thousand Eight

formworkof Plywood only with fair finish & Proping must be of steel only so as to give Hundred One Only

fair finish but excluding cost of the reinforcement concrete for RCC Work etc

complete For Lintel for Ground Floor. Rate are also inclusive of providing and mixing

Plasticiser of approved make in proportion as per mix design .

37 Providing & Laying Controlled Cement Concrete M-250 and including the cost of 5.00 Cum. 8841.01 Rs. Eight Thousand Eight

formworkof Plywood only with fair finish & Proping must be of steel only so as to give Hundred Forty One & Paise

fair finish but excluding cost of the reinforcement concrete for RCC Work etc

complete For Lintel for First Floor. Rate are also inclusive of providing and mixing

Plasticiser of approved make in proportion as per mix design .

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

38 Providing & Laying Controlled Cement Concrete M-250 and including the cost of 5.00 Cum. 8881.02 Rs. Eight Thousand Eight

formworkof Plywood only with fair finish & Proping must be of steel only so as to give Hundred Eighty One &

Paise Two Only

fair finish but excluding cost of the reinforcement concrete for RCC Work etc

complete For Lintel for Second Floor. Rate are also inclusive of providing and mixing

Plasticiser of approved make in proportion as per mix design .

39 Providing & Laying Controlled Cement Concrete M-250 and including the cost of 2.00 Cum. 8921.03 Rs. Eight Thousand Nine

formworkof Plywood only with fair finish & Proping must be of steel only so as to give Hundred Twenty One &

Paise Three Only

fair finish but excluding cost of the reinforcement concrete for RCC Work etc

complete For Lintel for Third Floor. Rate are also inclusive of providing and mixing

Plasticiser of approved make in proportion as per mix design .

40 Providing & Laying Controlled Cement Concrete M-250 and including the cost of 1.00 Cum. 8961.04 Rs. Eight Thousand Nine

formworkof Plywood only with fair finish & Proping must be of steel only so as to give Hundred Sixty One & Paise

fair finish but excluding cost of the reinforcement concrete for RCC Work etc

complete For Lintel for Fourth Floor. Rate are also inclusive of providing and mixing

Plasticiser of approved make in proportion as per mix design.

41 Providing & Laying Controlled Cement Concrete M-250 and including the cost of 1.00 Cum. 6060.00 Rs. Six Thousand Sixty Only

formworkof Plywood only with fair finish & Proping must be of steel only so as to give

fair finish but excluding cost of the reinforcement concrete for RCC Work etc

complete For Lintel Bend for Ground Floor. Rate are also inclusive of providing and

mixing Plasticiser of approved make in proportion as per mix design.

42 Providing and laying controlled cement concrete M-250 for reinforced concrete 58.00 Cum. 9887.87 Rs. Nine Thousand Eight

CHHAJJA for any thickness upto all floors including finishing the exposed surface Hundred Eighty Seven &

Paise Eighty Seven Only

with cement mortar 1:3 (1 cement : 3 fine sand) to give a smooth surface, centering

and formwork Plywood only with fair finish & Proping must be of steel only so as to

give fair finish and curing complete. excluding cost of reinforcement for All

Floor.Rate are also inclusive of providing and mixing Plasticiser of approved make in

proportion as per mix design .

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

43 Providing and laying Controlled cement concrete M-250 including finishing smooth 19.00 Cum. 8484.36 Rs. Eight Thousand Four

for R.C.C. STAIR CASE including the cost of formworkof Plywood only with fair finish Hundred Eighty Four &

Paise Thirty Six Only

& Proping must be of steel only so as to give fair finish and curing etc. Complete

excluding cost of reinforcement for ALL FLOORS. Rate are also inclusive of

providing and mixing Plasticiser of approved make in proportion as per mix design .

44 Providing & Laying Controlled Cement Concrete M-250 and including the cost of 20.00 Cum. 15153.94 Rs. Fifteen Thousand One

formworkof Plywood only with fair finish & Proping must be of steel only so as to give Hundred Fifty Three &

Paise Ninety Four Only

fair finish but excluding cost of the reinforcement concrete for RCC Work etc

complete For Horizontal & Vertical Fins for all Floor.Rate are also inclusive of

providing and mixing Plasticiser of approved make in proportion as per mix design .

45 Providing & Laying Controlled Cement Concrete M-250 and including the cost of 80.00 Cum. 8041.10 Rs. Eight Thousand Forty

formwork of Plywood only with fair finish & Proping must be of steel only so as to One & Paise Ten Only

give fair finish but excluding cost of the reinforcement concrete for RCC Work etc

complete For Fins for Sump.Rate are also inclusive of providing and mixing

Plasticiser of approved make in proportion as per mix design .

46 Providing TMT Bars Fe - 500 D reinforcement for RCC work including cutting, 126548.00 Kg 77.01 Rs. Seventy Seven & Paise

bending, binding and placing in position etc.complete for all floors.Steel must be One Only

used Approved Material list of GSPHCL.

47 Brick work using common burnt clay building bricks having crushing strength not 214.00 Cum. 4237.60 Rs. Four Thousand Two

less than 35 kg./Sq.Cm. in Foundation and Plinth in Cement Mortar 1:6 (1- Cement : Hundred Thirty Seven &

Paise Sixty Only

6 -fine sand)(B) Conventional

48 HALF BRICK masonary in common brunt clay building bricks having crushing 3.00 Sqm 634.43 Rs. Six Hundred Thirty

strength not less than 35 kg./sq.cm.in cement mortar 1:4 (1 cement : 4 coarse sand ) Four & Paise Forty Three

conventional bricks for foundation & plinth

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

49 Brick work using common burnt clay building bricks having crushing strength not 82.00 Cum. 4523.17 Rs. Four Thousand Five

less than 35 Kg/Sq.cm.in superstructure above plinth up to floor two level in Hundred Twenty Three &

Paise Seventeen Only

conventional bricks in cement mortar 1:6(1-cement;6-fine sand) for Ground Floor.

50 Brick work using common burnt clay building bricks having crushing strength not 149.00 Cum. 4565.52 Rs. Four Thousand Five

less than 35 Kg/Sq.cm.in superstructure above plinth up to floor two level in Hundred Sixty Five & Paise

Fifty Two Only

conventional bricks in cement mortar 1:6(1-cement;6-fine sand) forr First Floor

51 Brick work using common burnt clay building bricks having crushing strength not 137.00 Cum. 4607.87 Rs. Four Thousand Six

less than 35 Kg/Sq.cm.in superstructure above plinth up to floor two level in Hundred Seven & Paise

Eighty Seven Only

conventional bricks in cement mortar 1:6(1-cement;6-fine sand) forr Second Floor

52 Brick work using common burnt clay building bricks having crushing strength not 45.00 Cum. 4650.22 Rs. Four Thousand Six

less than 35 Kg/Sq.cm.in superstructure above plinth up to floor two level in Hundred Fifty & Paise

Twenty Two Only

conventional bricks in cement mortar 1:6(1-cement;6-fine sand) forrThird Floor

53 Brick work using common burnt clay building bricks having crushing strength not 16.00 Cum. 4692.57 Rs. Four Thousand Six

less than 35 Kg/Sq.cm.in superstructure above plinth up to floor two level in Hundred Ninety Two &

Paise Fifty Seven Only

conventional bricks in cement mortar 1:6(1-cement;6-fine sand) for Fourth Floor

54 HALF BRICK masonary in common brunt clay building bricks having crusing 34.00 Sqm. 689.60 Rs. Six Hundred Eighty

strength not less than 35 kg./sq.cm.in cement mortar 1:4 (1 cement : 4 coarse sand ) Nine & Paise Sixty Only

conventional bricks for Ground Floor.

55 HALF BRICK masonary in common brunt clay building bricks having crusing 62.00 Sqm. 695.94 Rs. Six Hundred Ninety

strength not less than 35 kg./sq.cm.in cement mortar 1:4 (1 cement : 4 coarse sand ) Five & Paise Ninety Four

conventional bricks for Frist Floor.

56 HALF BRICK masonary in common brunt clay building bricks having crusing 40.00 Sqm. 702.28 Rs. Seven Hundred Two &

strength not less than 35 kg./sq.cm.in cement mortar 1:4 (1 cement : 4 coarse sand ) Paise Twenty Eight Only

conventional bricks for Second Floor.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

57 Provinding and fixing chicken wire mesh Jali 0.18 mm and 0.18m wide with 690.00 Sqm. 64.06 Rs. Sixty Four & Paise Six

necessary screws and nails to joint between R.C.C. column and brick work etc. Only

complete as per Engineer-in-charge.

58 Providing and Fixing Granite Telephonic Black Colour 15 to 18 mm thick for jambs 203.00 Sqm. 2428.00 Rs. Two Thousand Four

and sills of doors & windows using neat cement slurry laid over 20 mm average base Hundred Twenty Eight Only

of cement mortar 1:1(1 cement:1 Coarse Sand) and jointed with grey cement slurry

including racking(Tancha Work) rubbing and polishing,scaffoldings,tools and

tackles,scaffolding etc. complete(with base of neat cement) as per direction of

Engineer in charge including full rounding the exposed edges as directed.

59 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior 549.00 Sqm. 226.90 Rs. Two Hundred Twenty

plastering and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including Six & Paise Ninety Only

finishing with a floating coat of neat cement slurry at GROUND FLOOR.

60 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior 506.00 Sqm. 254.01 Rs. Two Hundred Fifty Four

plastering and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including & Paise One Only

finishing with a floating coat of neat cement slurry at FIRST FLOOR.

61 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior 444.00 Sqm. 281.12 Rs. Two Hundred Eighty

plastering and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including One & Paise Twelve Only

finishing with a floating coat of neat cement slurry at Second FLOOR.

62 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior 36.00 Sqm. 308.23 Rs. Three Hundred Eight &

plastering and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including Paise Twenty Three Only

finishing with a floating coat of neat cement slurry at Third FLOOR.

63 Providing 10 mm thick cement PLASTER in single coat on ceilings for interior 36.00 Sqm. 335.34 Rs. Three Hundred Thirty

plastering and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including Five & Paise Thirty Four

finishing with a floating coat of neat cement slurry at Fourth FLOOR.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

64 Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for 1030.00 Sqm. 229.09 Rs. Two Hundred Twenty

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) Nine & Paise Nine Only

including finishing with floating coat of neat cement slurry at GROUND FLOOR.

65 Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for 1484.00 Sqm. 258.23 Rs. Two Hundred Fifty

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) Eight & Paise Twenty

Three Only

including finishing with floating coat of neat cement slurry at FIRST FLOOR.

66 Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for 1098.00 Sqm. 287.37 Rs. Two Hundred Eighty

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) Seven & Paise Thirty Seven

including finishing with floating coat of neat cement slurry atSecondFLOOR.

67 Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for 279.00 Sqm. 316.51 Rs. Three Hundred Sixteen

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) & Paise Fifty One Only

including finishing with floating coat of neat cement slurry at Third FLOOR.

68 Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for 86.00 Sqm. 345.65 Rs. Three Hundred Forty

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) Five & Paise Sixty Five Only

including finishing with floating coat of neat cement slurry at Fourth FLOOR.

69 Synthetic Texture Plaster with Double Coat Smooth plaster : 1552.00 Sqm. 527.37 Rs. Five Hundred Twenty

Providing 20mm thick cement plaster in single coat plastering upto floor two level Seven & Paise Thirty Seven

Outside and finished even and smooth in (i) Cement mortar 1:3 (1-cement : 3-sand)

as Base Coat and providing 2-3 mm thick synthetic texture plaster of approved

texture (Material Shall be Used as Approved By GSPHCL Only ) including cost of all

materials, labour, conveyance, loading and unloading, taxes, royalties, scaffolding,

watering etc.complete for any Height as per Drawing and instructions of Engineer -

in -Charge.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

70 Providing 20 mm thick SAND FACED cement Plaster on walls above ground level 914.00 Sqm 350.48 Rs. Three Hundred Fifty &

consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm thick Paise Forty Eight Only

finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc. Complete for any height.

71 Provinding CEMENT VATA (10cm x 10cm) size quarter round in cement mortar (1 : 332.00 Rmt 24.04 Rs. Twenty Four & Paise

1) including neat cement finishing, watering etc. Complete. Four Only

72 Providing and laying Zycosil in cement ( Polimeric adhesive) with preparing of 80.00 Sqm. 110.70 Rs. One Hundred Ten &

existing surface as per direction of Engineer in charge. Paise Seventy Only

73 Provinding 10 mm thick cement PLASTER in single coat of interior plastering and 420.00 Sqm. 266.59 Rs. Two Hundred Sixty Six

finished even and smooth in cement mortar 1:3 ( 1 cement : 3 sand ) and finishing & Paise Fifty Nine Only

with floating coat of neat cement slurry including providing and mixing with WATER

PROFFING material For ALL FLOORS.

74 Providing & laying ordinary CEMENT CONCRETE 1:2:4 ( 1 cement : 2 coarse sand : 4 101.00 Smt 352.17 Rs. Three Hundred Fifty

graded machine broken stone aggregate 20 mm nominal size ) for flooring Laid in Two & Paise Seventeen

one layer finished with floating coat of neat cement

(A) 50 mm Thick.

75 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile flooring 883.00 Sqm. 1768.90 Rs. One Thousand Seven

over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new Hundred Sixty Eight &

Paise Ninety Only

surface orfixing on existing flooring by adhesive including dismentaling of existing

flooring and material jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete size and shade of tiles shall be as per

approved architecture drawing and as per direction of engineer-in-charge for all

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

76 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile for 78.00 Sqm. 1445.20 Rs. One Thousand Four

skirting,risers of steps and dedo over 20 mm (average) base of cement mortar 1:6 ( Hundred Forty Five & Paise

Twenty Only

1 cement: 6 coarse sand) on new surface orfixing on existing flooring by adhesive

including dismentaling of existing flooring and material jointed with color cement

slurry including finised with flush pointing & cleaning the surface etc. complete size

and shade of tiles shall be as per approved architecture drawing and as per

direction of engineer-in-charge for all floors .

77 Provinding & laying 24" x 24" Vitrified 8 to 10 mm thick tile flooring over 20 mm 48.00 Sqm. 1458.33 Rs. One Thousand Four

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or Hundred Fifty Eight & Paise

Thirty Three Only

fixing on existing flooring by adhesive material including dismentaling of existing

flooring and material jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for Antiskid. size and shade of tiles

shall be as per approved architecture drawing and as per direction of engineer-in-

charge for all floors

78 Provinding & laying Printed / Coloured GLAZED TILES 8 mm to 10mm thick in 222.00 Sqm. 1508.58 Rs. One Thousand Five

skirting, risers of steps and DADO on 10mm thick cement plaster 1: 3 ( 1 cement : 3 Hundred Eight & Paise Fifty

Eight Only

coarse sand ) & jointed with white cement slurry.Size ot tiles shall be 600mm

x300mm. size and shade of tiles shall be as per approved architecture drawing and

as per direction of engineer-in-charge for all floors .

79 Providing and Laying 25mm thick Mirror Polished (Dimond Cut) Kota Stone Flooring 409.00 Sqm. 1108.30 Rs. One Thousand One

over 20mm thick base of cement mortar 1 : 6 (1-Cement : 6-Coarse Sand) laid over Hundred Eight & Paise

Thirty Only

and jointed with grey cement slurry including Rubbing and Polishing etc. Complete

as Directed By Engineer In Charge for all Floors.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

80 Providing and Laying 25mm thick Mirror Polished (Dimond Cut) Kota Stone in risers 28.00 Sqm. 1292.70 Rs. One Thousand Two

of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : Hundred Ninety Two &

Paise Seventy Only

3 coarse sand) and jointed with gray cement slury mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete as Directed By

Engineer In Charge for all Floors.

81 Provinding and Laying 18 mm thick Granite Stone Slab Flooring of approved colour 115.00 Sqm. 2158.45 Rs. Two Thousand One

& quality & brand over 20mm thick average base of C.M. 1:6 (1cement : 6 coarse Hundred Fifty Eight & Paise

Forty Five Only

sand) laid and jointed with grey cement slury including Rubbing and Polishing etc.

Complete for All Floors.

82 Provinding and Laying 18 mm thick Granite Stone Slab for Skirting, Dado of 90.00 Sqm. 2342.81 Rs. Two Thousand Three

approved colour & quality & brand over 20mm thick average base of C.M. 1:6 Hundred Forty Two & Paise

Eighty One Only

(1cement : 6 coarse sand) laid and jointed with grey cement slury including Rubbing

and Polishing etc. Complete for All Floors.

83 Providing and fixing both side polished machine cut Granite Shelves / Partitions 10.00 Sqm. 3322.50 Rs. Three Thousand Three

18mm thick embaded in to wall at support including racking and finishing smooth Hundred Twenty Two &

Paise Fifty Only

the surface including cutting the stone as and where required etc. complete

including rounding of exposed edges etc. complete.

84 Moulding of Kota stone / Granite Stair Tread complete as per direction of Engineer 263.00 Rmt 129.95 Rs. One Hundred Twenty

In Charge. For all floor. Nine & Paise Ninety Five

85 Pro and Making 3 nos of groove total length of stair case trade of size 10mm x 10mm 255.00 Rmt 82.80 Rs. Eighty Two & Paise

finishind smooth in parralel line.equality spaced as per direction of engineerr in Eighty Only

charge in all type of flooring etc complete. For all floor.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

86 Constructing of Cooking platform ( sandwich type ) 68cm width and 84 cm high 5.00 Rmt 3758.47 Rs. Three Thousand Seven

resting on thick sandwiched polish Granite Slab in C.M 1:3 with providing and fixing Hundred Fifty Eight & Paise

Forty Seven Only

25 mm thick rough kota stone at bottom and 20 to 25 mm thick Polish Granite stone (

single piece/ telephonic Black ) top & Vertical and polished granite stone (single

piece/ telephonic Black ) 20 to 25mm thick on top & polished granite round moulded

Top facia patty including polishing etc . complete as per drawing and specification

without stainless steel sink including necessary cutting for sink & making hole for

gas pipe and fixing P.V.C bend of 25mm dia.

87 Providing and fixing extruted Alluminium section window having extruded 204.00 Sqm. 2119.14 Rs. Two Thousand One

Aluminum Colour anodized section frame main outer size 127mm x 38.10mm x Hundred Ninteen & Paise

Fourteen Only

1.35mm (of Jindal Section no:2443, @ wt.of 1.384 Kg/mt), horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm (of Jindal Section no:8787,@ Wt.1.205

Kg/mt), vertical member of size 122.20mm x 31.75mm x 1.50mm (of Jindal Section

no:8935,@ Wt. 1.398 Kg/mt) with sliding shutters of horizontal member size

mmx18mm x1.29mm (of Jindal Section no:8949@ wt.of 0.456 Kg/mt), vertical

member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8947 @ wt.of

0.456Kg/mt/section 8948,@Wt. 457 kg/mt with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc. complete for window for NRB

Buildings.(With Out Outer Frame)

88 Providing and fixing standard extruded of ALLUMINIUM SECTION of size 63mm x 53.00 Sqm. 1163.92 Rs. One Thousand One

38.10mm x 1.2mm (Jindal Section :2434,@Wt.0.643 kg per mt) with colour anodized Hundred Sixty Three &

Paise Ninety Two Only

alluminium frame for ventilation with 5mm thick frosted glass as details etc complete

for VENTILATION.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

89 Providing, Supplying and Fixing of 32mm (Total) Thick Double Flush Door Shutter 46.00 sqm 10027.39 Rs. Ten Thousand Twenty

with 1mm Thick Laminates on Both Side of Shutter. Making / Construction of Flush Seven & Paise Thirty Nine

Door is with Pine or southern Yellow Pine Filler and 2.5mm core veneer Both Side

and 0.4mm Face Veneer on Both Side with Lock rail on Center. Flush Door Provide

with Teak wood beading patti (32mm X 12mm) on Peripheries of Flush Door with

Door Frame of Non Teak Solid Wood of size 120mm x 65mm with Chemically Treated

and Seasoned Including Paint Matching with Laminates. Frame & Flush door shutter

having 5 year warranty against attack of biological agent like termite, borers, decay,

fungi and harmful insects also warranty against seasoning related issues like crack,

bending, twisting, warping. Laminates on shutter shall be press by cold press

method. Shutter shall be brought to site in packed PVC bags & pvc coating shall be

removed on completion of work in such a way that shutter & Frame is free from nail

mark & any damages etc. Rates are also Inclusive of all Labors & Proviging 15cm.

Long 8 No of Hold Fast (25mm X 5mm) & 4 No of 6 Inch S.S. but Hinges, 100mm x

mm x 3mm thick, required Screw & Nails per Frame and Fixing 6mm thick Glass on

Top of Door Frame with Battens Patti, following S.S. Fixtures And Fastening.

(1) Aldrops 1 No, 250mm x 16mm & Tadi 1 No, (2) Door Stopper 1 No, 100mm Long,

(3) Double Leg Heavy Push Door Stopper 1 No & (4) Handle 2 No, 150mm Long X

10mm thick. Door with Glass are Fixing as per Details Drawing & Instruction of

Engineer in charge. All Materials Used Shall be as Per approved Material Make List

of G.S.P.H.C. The Required Frame is to be Obtained from Vanil Udhyog Maked Only.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

90 Providing, Supplying and Fixing of 32mm (Total) Thick Single Flush Door Shutter 80.00 Sqm 8408.29 Rs. Eight Thousand Four

with 1mm Thick Laminates on Both Side of Shutter. Making / Construction of Flush Hundred Eight & Paise

Twenty Nine Only

Door is with Pine or southern Yellow Pine Filler and 2.5mm core veneer Both Side

and 0.4mm Face Veneer on Both Side with Lock rail on Center. Flush Door Provide

with Teak wood beading patti (32mm X 12mm) on Peripheries of Flush Door with

Door Frame of Non Teak Solid Wood of size 100mm x 60mm with Chemically Treated

and Seasoned Including Paint Matching with Laminates. Frame & Flush door shutter

having 5 year warranty against attack of biological agent like termite, borers, decay,

fungi and harmful insects also warranty against seasoning related issues like crack,

bending, twisting, warping. Laminates on shutter shall be press by cold press

method. Shutter shall be brought to site in packed PVC bags & pvc coating shall be

removed on completion of work in such a way that shutter & Frame is free from nail

mark & any damages etc. Rates are also Inclusive of all Labors & Proviging 15cm.

Long 8 No of Hold Fast (25mm X 5mm) & 4 No of 6 Inch S.S. but Hinges, 100mm x

mm x 3mm thick, required Screw & Nails per Frame and Fixing following S.S.

Fixtures And Fastening.

(1) Aldrops 1 No, 250mm x 16mm & Tadi 1 No, (2) Door Stopper 1 No, 100mm Long,

(3) Double Leg Heavy Push Door Stopper 1 No & (4) Handle 2 No, 150mm Long X

10mm thick. Door are Fixing as per Details Drawing & Instruction of Engineer in

charge. All Materials Used Shall be as Per approved Material Make List of G.S.P.H.C.

The Required Frame is to be Obtained from Vanil Udhyog Maked Only.

91 Providing & fixing hydraulic door closer of approved size and made such as 42.00 No. 1411.05 Rs. One Thousand Four

EVERITE/HYPER/EGL/GODREJ or equivalent as directed. All lift, level and leads. Hundred Eleven & Paise

92 Providing and Fixing Teak wood door frame patti 40mm x 10mm thick as per detail 204.00 Rmt 71.01 Rs. Seventy One & Paise

drawing and as directed by engineer in charge. Rates are inclusive of all material, One Only

labour and taxes etc. Complete

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

93 Providing and fixing Solid PVC Flush Door Shutters 24mm thick made fro Co- 18.00 Sqm 4476.00 Rs. Four Thousand Four

Extruded THREE LAYER RIGID PVC Foam Sheet (Single extruded) with density not Hundred Seventy Six Only

less than 600 Kg / cbm. Outer Layer (0.8-1mm) thick should be of Rigid PVC with

Density not less than 1400 kg/cbm including Providing & Fixing WPC Door Frame

Uperline Patti of 24mm x 6mm Size. Door should be Water proof, Termite proof, Fire

Retardant & having good screw holding capacity. Providing & Fixing 100% Solid

Wood Plastic Composit (WPC) Door Frame 90mm x 45mm made from Wood Plastic

Composite (Single extruded Process) material with dencity 780kg / cbm All as per

specifications & drawings etc. complete as per direction of Engineer-in-charge.

94 Providing & fixing WPC DOOR PATTI 24mmx6mm thick as per per Detail drawigs 51.00 Rmt 57.02 Rs. Fifty Seven & Paise Two

and as directed by Engineer in charge. Rate are inclusive of all material, labour, Only

95 Providing & Fixing rolling shutters of approved make made of 80mm wide M.S. Laths 44.00 Smt 3519.21 Rs. Three Thousand Five

inter-locked together through their entire length and joints togethe at the ends by Hundred Ninteen & Paise

Twenty One Only

end locks mounted on specially designed pipe shaft with bracket plates, guide

channels and arrangements for inside and outside locking with push-pull operation

including cost of hood cover and spring etc. complete. (A) Shutters having width

below 3.5 M.

96 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter with 16.00 No. 582.44 Rs. Five Hundred Eighty

jali of the following nominal diameter of self cleansing design with C.I scread down Two & Paise Forty Four

or hinged grating including the cost of cutting and making good the walls.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

97 Providing & fixing PVC SWR MULTY NANHI TRAP IS:14735 for drain -100mm dia. 14.00 No. 1122.26 Rs. One Thousand One

With jali of following nominal dia. Of self cleansing design with C.I. Screwed down Hundred Twenty Two &

Paise Twenty Six Only

or Hinged grating including the cost of cutting and making good the walls. Rate are

inclusive of all necessary fittings, material, labour etc.complete as per direction of

Engineer In charge.Providing & Fixing Floor drain jali (Glossy Finish) (on N.T.) of 6"

X 6"size made of Stainless Steel Grade 304 Floor Drain 3 Piece (Cover/Jali/Grating)

With Anti Cockroach Bowl on N.T. Rate are inclusive of all necessary fittings,

material, labour etc.complete as per direction of Engineer In charge.

98 Providing and fixing to wall, ceiling and floor UPVC/SWR Soil Waste Pipe with 'O' 77.00 Rmt. 471.36 Rs. Four Hundred Seventy

Ring 110 mm dia. of ISI 13592/92. Rate inclusive of All fittings like single or double One & Paise Thirty Six Only

'Y' with door, reducer, coupler single 'T' with door bend,including All Labour

Charges etc. complete and making good the Wall, Ceiling and Floor, ISI make only.

Joints shall be sealed by pipe sealant.

99 Providing and fixing to wall, ceiling and floor UPVC/SWR Soil Waste Pipe with 'O' 94.00 Rmt. 245.74 Rs. Two Hundred Forty

Ring 75 mm dia. of ISI 13592/92. Rate inclusive of All fittings like single or double 'Y' Five & Paise Seventy Four

with door, reducer, coupler single 'T' with door bend,including All Labour Charges

etc. complete and making good the Wall, Ceiling and Floor, ISI make only. Joints

shall be sealed by pipe sealant.

100 Provinding and fixing in position PVC COWEL VENT to pipe 75 mm dia directed. 6.00 No. 16.47 Rs. Sixteen & Paise Forty

Seven Only

101 Provinding and fixing in position PVC COWEL VENT to pipe 110 mm dia directed. 6.00 No. 28.16 Rs. Twenty Eight & Paise

Sixteen Only

102 P & F to Wall Ceilling and Floor SWR Rain Water Pipe as Per IS-13592 of 90mm Dia. 117.00 Rmt. 302.54 Rs. Three Hundred Two &

Complete with Special Flings, Compressor type Fittings, Wall clips on wooden patty Paise Fifty Four Only

including making good the ceiling and floor on terrace rain water pipe shall be

mm Dia. SWR horizontal pipe and vertical pipe and 90mm bend at the end near by

Ground level rate are Inclusive of all Necessary Fittings required for ALL FLOORS.

103 Providing & fixing Gun metal Handle valve only, with all necessary fittings 25mm 5.00 No. 416.47 Rs. Four Hundred Sixteen

Dia. Brand shall be as per approved make list of GSPHC. & Paise Forty Seven Only

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

104 Providing & fixing Gun metal Handle valve only, with all necessary fittings 40mm 10.00 No. 656.86 Rs. Six Hundred Fifty Six &

Dia. Brand shall be as per approved make list of GSPHC. Paise Eighty Six Only

105 Providing & fixing Gun metal Handle valve only, with all necessary fittings 50mm 3.00 No. 2302.33 Rs. Two Thousand Three

Dia. Brand shall be as per approved make list of GSPHC. Hundred Two & Paise

Thirty Three Only

106 Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) 80.00 Rmt. 654.04 Rs. Six Hundred Fifty Four

PIPE having National Sanitation Foundation (NSF) seal For Portable Water of 50 mm. & Paise Four Only

dia. nominal bor tube fitting and clamps including making good the wall, ceiling

and floor etc. Complete all material must be used Approved Material list of GSPHCL.

107 Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) 103.00 Rmt. 443.29 Rs. Four Hundred Forty

PIPE having National Sanitation Foundation (NSF) seal For Portable Water of 40 mm. Three & Paise Twenty Nine

dia. nominal bor tube fitting and clamps including making good the wall, ceiling

and floor etc. Complete all material must be used Approved Material list of GSPHCL.

108 Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) 3.00 Rmt. 334.89 Rs. Three Hundred Thirty

PIPE having National Sanitation Foundation (NSF) seal For Portable Water of 32 mm. Four & Paise Eighty Nine

dia. nominal bor tube fitting and clamps including making good the wall, ceiling

and floor etc. Complete all material must be used Approved Material list of GSPHCL.

109 Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) 60.00 Rmt. 251.31 Rs. Two Hundred Fifty One

PIPE having National Sanitation Foundation (NSF) seal For Portable Water of 25 mm. & Paise Thirty One Only

dia. nominal bor tube fitting and clamps including making good the wall, ceiling

and floor etc. Complete all material must be used Approved Material list of GSPHCL.

110 Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) 61.00 Rmt. 206.73 Rs. Two Hundred Six &

PIPE having National Sanitation Foundation (NSF) seal For Portable Water of 20 mm. Paise Seventy Three Only

dia. nominal bor tube fitting and clamps including making good the wall, ceiling

and floor etc. Complete all material must be used Approved Material list of GSPHCL.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

111 Providing and laying Integrated cement based proprietary water proofing treatment 607.00 Sqm. 924.72 Rs. Nine Hundred Twenty

of required thickness over the roof incl.10mm thick waterproofing cement plaster in Four & Paise Seventy Two

cement mortar 1:3 and china mosaic fitting and finally finishing the surface with white

cement slurry and sloping out terrace slab with following specification laid to

required slope not flatter that 1:80 (the thickness of water proofing treatment near

rainwater outlet or the lowest point of the finished slop shall not be less than 45mm

incl. treating the vertical surface of the parapet wall unto 20 cms. height above

finished level of terracing incl. finishing the top with joint less water proofing

plaster, curing testing etc. complete.) Rate is including ten years performance of

guarantee bond to be given on stamp paper. (No. extra shall be paid for increase in

thickness for proper slope.)

a)Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm. of cement

admixed with proprietary water proofing compound conforming to IS-2645 and

10mm thick water proofing cement plaster in Cement mortar 1:3 over the R.C.C slab

including cleaning the surface before treatments.

b)Laying cement concrete using broken brick bats 25 mm to 40 mm size with 50% of

cement mortar 1:4(1 cement : 4 coarse sand) over 10mm thick water proofing

cement mortar 1:3 (1 cement : 3 coarse sand) admixed with proprietary water

proofing compound conforming to IS -2645 to required slope and treating similarly

the adjoining walls upto 200mm height including rounding of junction of walls.

(c) After two day of proper curing applying a second coat of cement slurry.

(d)Finishing the surface with china mosaic pieces laid on 10mm thick joint less

cement plaster of mix 1:3 ( 1 cement : 3 coarse sand) admixed with proprietary water

proofing compound conforming to IS-2645 and finally finishing the surface with

trowel with neat slurry.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

(e)The whole terrace so finished shall be flooded with water for a minimum period of

two weeks for curing for final test all above operation to be done in order and as

directed and specified by the Engineer in change.

112 Providing, Fabricating and fixing M.S. GRILL/GATE of approved pattern fabricated 15635.00 Kg. 75.20 Rs. Seventy Five & Paise

from M.S. flat,square bars, round bars,c-channel, box pipe as per detail Drawings. Twenty Only

Rate is including welding with grinding. Rate is also including two coats of Oil paint

and one coat of yellow Zinc cromet primer coat of approved brand only oil paint

shall be used as per approved material list of GSPHCL, structural steel must be of ISI

mark only. for all floor and at any height only.

113 Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on Ceilling/Slop Surface 1576.00 Sqm. 192.51 Rs. One Hundred Ninety

(two coats) to give an required shap even shade after throughly brushing the Two & Paise Fifty One Only

surface to remove all dirt and remains of loose poweder material etc. complete. Rate

are inclusive of applying two coat of lapy (Putty) and one coat of primer on new

Ceilling/Slop Surface to give and even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter and sand papered

smooth. Fine Putty, primer , plastic emulsion paint shall be used as per approved

material list by GSPHCL ( For all floor ).

114 Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to give an 3831.00 Sqm. 181.87 Rs. One Hundred Eighty

required shap even shade after throughly brushing the surface to remove all dirt and One & Paise Eighty Seven

remains of loose poweder material etc. complete. Rate are inclusive of applying two

coat of lapy (Putty) and one coat of primer on new wall surface to give and even

shade including thoroughly brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth. Fine Putty, primer , plastic emulsion

paint shall be used as per approved material list by GSPHCL ( For all floor ).

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

115 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) 2785.00 Sqm. 155.21 Rs. One Hundred Fifty Five

over and above applying One Coat Of Primer to give an required shape even shade & Paise Twenty One Only

after thoroughly brushing the surface to remove all dirt, and remains of loose

powdered materials.etc complete.Primer, Exterior emulsion paint shall be used as

per approved material list by GSPHCL ( For any height ).

116 Providing and Fixing 3mm thick FRP fiber sheet with net multi wall roofing sheet 52.00 Sqm. 669.44 Rs. Six Hundred Sixty Nine

fixed with hooks, bolts,nuts,rubber silicon sealer and fixing any height etc complete & Paise Forty Four Only

as per approved drawing a direction given by Engineer in Charge.

117 Pro.And fixing single layer Waterproof Gypsum Board 12.5 mm thick sections using 52.00 Sqm. 600.94 Rs. Six Hundred & Paise

waterproof board of size 1220mm x1830mm x8.0mm suspended by GIsuspender Ninety Four Only

channel of size 25mm x3mm with intermediate channelog size 18mm x40mm x0.8mm

at 1220mm center tocenter ceiling sectionof size 40mm x35mmx0.55mm at 457mm

c/c andperimeter channelA of size 20mmx27mmx30mmx0.5mm atedges &drop sincl

.paper tap sands ofitcleat, anchorfastener ,scochbolt connecting cleat ,joining

compound top coatonceiling incl. makingnecy. opening forlightfitting ,diffuser etc.

comp .as per detail drawing as directed

118 Supplying And Installation Of GRC Jali thickness 25mm,Grade M-40, Flexural 70.00 Sqm. 7379.10 Rs. Seven Thousand Three

M8,Back side Double coated frame fabrication at site including installation at site Hundred Seventy Nine &

Paise Ten Only

transportation loading and unloading all with both sides weather proof emulsion

paints etc completed as directed by EIC

119 Providing And Laying R Shapped Bulfle galvanized steel 55R Panel with 25mm clear 13.00 Sqm. 1696.25 Rs. One Thousand Six

gap between two panel plain exterior cladding system with super coal powder coal Hundred Ninety Six & Paise

Twenty Five Only

on visible surface of panels and structure black colour coated system

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

120 Providing and Fixing of Stainless Steel 304 grade Pipe Railing 0.90mt. Height. Top 41.00 Rmt 3143.43 Rs. Three Thousand One

Round Pipe (Baluster) of 2" dia. Vertical balustrade 1.5" x 1.5" at every max. 0.90mt. Hundred Forty Three &

Paise Forty Three Only

c/c and intermediate 3 nos. runners pipe mid rail of 1" dia. and S.S. base plate of

x 8mm. The Railing system shall be floor mounted with anchor fastener and base

plate of 100mm size having 8mm thickness completed as per detailed drawing & as

directed by engineer in charge. Rate are inclusive of all material, labour, taxes &

polishing.

121 Providing and Fixing of Stainless steel 304 grade pipe(hand rail) railing. top pipe of 39.00 Rmt 911.03 Rs. Nine Hundred Eleven &

2" dia , vertical support 1.5 " x1.5" at every max. 0.9 mt c/c, fixed with Paise Three Only

stone/concrete or brickwork &finishing the said as directed by engineer in charge.

Rate are inclusive of all material,labour,taxes&polishing.

122 Providing and Fixing Stainless Steel (304 Grade) 1mm thick Matt / Satin Finish 1.00 No. 4269.00 Rs. Four Thousand Two

Kitchen Sink of over all Minimum size 533mm x 457mm x 203mm deep having bowl Hundred Sixty Nine Only

Minimum size 470mm x 395mm x 203mm Finishing with cement mortar 1:3 (1-

Cement : 3-Fine Sand) etc. Complete. Rate including of 32mm dia. C.P. Brass Waste

Coupling and 32mm dia. Rigid PVC Waste Pipe upto N.T. (S.S. Kitchen Sink Shall be

of Nirali, Navkar, Carysil or Krishna make Only) for ALL FLOORS.

123 Providing & Fixing Wall Mounted Sink Cock with Extended Swivel Spout & Wall 1.00 No. 1330.32 Rs. One Thousand Three

Flange . Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Hundred Thirty & Paise

Thirty Two Only

Complete as per Detailed Drawings, Specifications and as per the Instruction of

Engineer In charge. The Model & Make of Sink Cock Shall be as per the Approved

Make List of GSPHCL.

124 Providing and fixing Water Closet Squatting Pan (Orrissa Type W.C.PAN) size 580 2.00 No. 1028.45 Rs. One Thousand Twenty

mm first quality including necessary 'P' or 'S' trap, including jointing the trap with pan Eight & Paise Forty Five

& soil pipe or PVC Trap with pvc canectour, M.S.Clamp etc. in vitreous china white

colour. Joints shall be sealed by pipe sealant.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

125 Providing & Fixing Wall Hung with PVC Flush Tank, Soft Seat Cover & intergal "P" or 8.00 No. 5470.90 Rs. Five Thousand Four

"S" Trap including Jointing the Trap with Pan and Soil pipe. Wall hung shall be fixed Hundred Seventy & Paise

Ninety Only

on S.S heavy duty rack bolt having 16mm dia, 165mm length using Plastic sleeve

Make by Using Drill Bitt Only. Rate are inclusive of all matreials, Labour & Necessary

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the

Instruction of Engineer In charge. The Model & Make of Wall Hung & Flush Tank

Shall be as per the Approved Make List of GSPHCL.

126 Providing & Fixing Health faucets (ABS body). Rate are inclusive of all materials, 8.00 No. 565.51 Rs. Five Hundred Sixty Five

Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications & Paise Fifty One Only

and as per the Instruction of Engineer In Charge. The Model & Make of Health

Faucets shall be as per the Approved Make List of GSPHCL.

127 Providing & Fixing Two Way Bib Tap with Wall Flange. Rate are inclusive of all 2.00 No. 1309.39 Rs. One Thousand Three

materials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Hundred Nine & Paise

Thirty Nine Only

Specifications and as per the Instruction of Engineer In Charge. The Model & Make

of Two way Bib Tap shall be as per the Approved Make List of GSPHCL.

128 Providing & Fixing 25mm Concealed Heavy Duty Stop Cock with Exposed Part & 10.00 No. 1233.57 Rs. One Thousand Two

Other Accessories (Sleeve, Lever, Wall Flange) . Rate are inclusive of all matreials, Hundred Thirty Three &

Paise Fifty Seven Only

Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications

and as per the Instruction of Engineer In charge. The Model & Make of Concealed

Heavy Stop Cock Shall be as per the Approved Make List of GSPHCL.

129 Providing and fixing Single Hole Wash Basin with C.I. or M.S. brackete & M.I. fisher 10.00 No. 3935.33 Rs. Three Thousand Nine

union, P.V.C. water pipe with connection from Stop Cock to Pillar Tap, PVC Bottle Hundred Thirty Five &

Paise Thirty Three Only

trap with connection 32mm dia. C.P. brass waste coupling etc. complete. Rate are

inclusive of all materials, Labour & Necessary Fittings etc. Complete as per Detailed

Drawings, Specifications and as per instruction of Engineer In Charge. The Model &

Make of Wash Basin Shall be as per the Approved Make List of GSPHCL.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

130 Providing and fixing 600mm x 450mm bevelled edge Mirror of superior glass 10.00 No. 850.90 Rs. Eight Hundred Fifty &

mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with Paise Ninety Only

C.P. brass screws and washers.

131 Providing & Fixing Towel Rod. Rate are inclusive of all materials, Labour & 2.00 No. 1078.70 Rs. One Thousand Seventy

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as Eight & Paise Seventy Only

per the Instruction of Engineer In Charge. The Model & Make of Towel Rod shall be

as per the Approved Make List of GSPHCL.

132 Providing & Fixing Towel Ring. Rate are inclusive of all matreials, Labour & 10.00 No. 909.08 Rs. Nine Hundred Nine &

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as Paise Eight Only

per the Instruction of Engineer In charge. The Model & Make of Towel Ring Shall be

as per the Approved Make List of GSPHCL.

133 Providing & Fixing S.S. Cloth Hanger (5 Hook). Rate as per detail drawing and as 10.00 No. 249.85 Rs. Two Hundred Forty

directed by engineer in charge.Rate are inclusive of all materials, Labour & Nine & Paise Eighty Five

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as

per the Instruction of Engineer In Charge. The Model & Make shall be as per the

Approved Make List of GSPHCL.

134 Providing & Fixing 15mm Concealed Heavy Duty Stop Cock with Exposed Part & 10.00 No. 942.54 Rs. Nine Hundred Forty

Other Accessories (Sleeve, Lever, Wall Flange) . Rate are inclusive of all matreials, Two & Paise Fifty Four Only

Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications

and as per the Instruction of Engineer In charge. The Model & Make of Concealed

Heavy Stop Cock Shall be as per the Approved Make List of GSPHCL.

135 Providing & Fixing 15mm One way Bib Tap with wall flange. Rate are inclusive of all 11.00 No. 990.61 Rs. Nine Hundred Ninety &

materials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Paise Sixty One Only

Specifications and as per the Instruction of Engineer In Charge. The Model & Make

of Bib Tap shall be as per the Approved Make List of GSPHCL.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

136 Providing & Fixing Shower with Arm. Rate are inclusive of all materials, Labour & 2.00 No. 931.79 Rs. Nine Hundred Thirty

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as One & Paise Seventy Nine

per the Instruction of Engineer In Charge. The Model & Make of Shower with Arm

shall be as per the Approved Make List of GSPHCL.

137 Providing and fixing in position ISI marked Rotational moulded Polyethylene double 5000.00 Ltr. 3.91 Rs. Three & Paise Ninety

layer Cylindrical vertical storage Tank (IS : 1270) Water Tank Size including marking One Only

inlet and outlet. Over flow and washout arrangement with G.I. connection including

using necessary M.H. for connection etc. complete with closed cover including

applying two coats of oil painting outside the Tank etc. complete.

138 Providing and Fixing Urinal with P.V.C.water pipe,32mm dia C.P. Brass waste 6.00 No. 2098.98 Rs. Two Thousand Ninety

coupling with connection 32mm dia waste pipe etc complete Rate are inclusive of all Eight & Paise Ninety Eight

materials labour and necessary fittings etc complete as per Detialed

drawings,Specifications and as per the instruction of Engineer In charge. The model

& Make of Urinal shall be as per approved make list of GSPHCL.

139 Provinding and fixing SW gully trap with out CI grating brick masonary chamber and 8.00 No. 1176.94 Rs. One Thousand One

water tight CI cover with frame of 300*300mm size inside with standard weight (I) Hundred Seventy Six &

Paise Ninety Four Only

Square mouth traps ©150*100mm size P or S type

140 Constructing brick masonry chamber for under ground C.I. inspection chamber and 31.00 No. 3793.18 Rs. Three Thousand Seven

bends with brick having crushing strength not less than 35 kg./cm2 in C.M. 1.5 Hundred Ninety Three &

Paise Eighteen Only

precast R.C.C. cover 1:1.5:3 of Size 455 x 610 mm internal dimenslons. R.C.C. top

slab with C.C. 1:1.5:3 mix (1 Cement : 1.5 coarse sand :3 graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cment walls & bed connect etc.

complete rate inclusive of outside plaster of 15mm thick in cm 1:3 form top of

chamber and all side up to 15 cm deep below ground level. rate also inclusive of

providing and fixing precast cover of size 0.7 m x 0.5 x .07 m with 2 no of m.s. flat

handle in cement concrete 1:1.5:3.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

141 Extra over above item for additional depth of 0.1 m or part thereof beyond 450mm 40.00 No. 239.99 Rs. Two Hundred Thirty

depth for brick masonary chamber for (I) size 455 x 610mm Nine & Paise Ninety Nine

142 Constructing brick masonry chamber for under ground C.I. inspection chamber and 24.00 No. 5476.93 Rs. Five Thousand Four

bends with brick having crushing strength not less than 35 kg./cm2 in C.M. 1.5 Hundred Seventy Six &

Paise Ninety Three Only

precast R.C.C. cover 1:1.5:3 of Size 600 x 850 mm internal dimenslons. R.C.C. top

slab with C.C. 1:1.5:3 mix (1 Cement : 1.5 coarse sand :3 graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cment walls & bed connect etc.

complete rate inclusive of outside plaster of 15mm thick in cm 1:3 form top of

chamber and all side up to 15 cm deep below ground level. rate also inclusive of

providing and fixing precast cover of size 0.7 m x 0.95 x .07 m with 2 no of m.s. flat

handle in cement concrete 1:1.5:3.

143 Extra over above item for additional depth of 0.1 m or part thereof beyond 450mm 22.00 No. 322.37 Rs. Three Hundred Twenty

depth for brick masonary chamber for (I)Size 600 x850 mm Two & Paise Thirty Seven

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

144 Providing, supplying and Fixing Corrugated DWC HDPE Pipes of Class SN8 45.00 Rmt. 229.00 Rs. Two Hundred Twenty

Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and Nine Only

elastomeric sealing ring) with non-smooth External Annular Corrugated and Smooth

Internal Surfaces (Double Wall) for non-pressure underground Sewerage & Drainage

application as per EN:13476-3 including all local and central taxes, transportation,

freight charges, octroi, inspection charges, loading, unloading, conveyance to the

departmental stores etc. complete. (100mm ID Dia) Including Lowering, laying and

jointing of class SN 8 structured wall ( External Annular Corrugated & Smooth

Internal surface) Polyethylene Piping and fittings with the help of coupler ( on line /

off line ) attached with one end of pipes, sliding over the elastomeric sealing rubber

ring placed on the specified valley of the corrugation at the spigot end, lowering the

same into the trench, laying on the lower bedding (constructed at bottom of

trenches) at prescribed gradient,depth & alignment ,testing the water tightness of

the joints, ensuring the continuity tests of specified pipe segments etc. complete as

per drawing,specifications & detailed engineering, including carriage of pipes &

fittings from site stacks to the place of laying etc. as per direction of Engineer-in-

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

145 Providing, supplying and fixing Corrugated DWC HDPE Pipes of Class SN8 125.00 Rmt. 396.00 Rs. Three Hundred Ninety

Structured Wall polyethelene Piping systems (Pipe with online/offline coupler and Six Only

elastomeric sealing ring) with non-smooth External Annular Corrugated and Smooth

Internal Surfaces (Double Wall) for non-pressure underground Sewerage & Drainage

application as per EN:13476-3 including all local and central taxes, transportation,

freight charges, octroi, inspection charges, loading, unloading, conveyance to the

departmental stores etc. complete. (150 mm ID Dia) Including Lowering, laying and

jointing of class SN 8 structured wall ( External Annular Corrugated & Smooth

Internal surface) Polyethylene Piping and fittings with the help of coupler ( on line /

off line ) attached with one end of pipes, sliding over the elastomeric sealing rubber

ring placed on the specified valley of the corrugation at the spigot end, lowering the

same into the trench, laying on the lower bedding (constructed at bottom of

trenches) at prescribed gradient,depth & alignment ,testing the water tightness of

the joints, ensuring the continuity tests of specified pipe segments etc. complete as

per drawing,specifications & detailed engineering, including carriage of pipes &

fittings from site stacks to the place of laying etc. as per direction of Engineer-in-

146 Providing and fixing Acrylic sheet with Vinyl letter colour -2073 - dark grey for bak 5.00 Sqmt 7193.88 Rs. Seven Thousand One

ground and colour -2199 - white letter with required scroo ..etc as per required Hundred Ninety Three &

Paise Eighty Eight Only

sizes complete etc as per specification.& instruction of Engineer Incharge.

147 Providing, supplying & fixing Stainless steel letters(30.00cmt Height & 4.50cmt wide) 30.00 No. 1056.52 Rs. One Thousand Fifty Six

304 grade with spraying colour on surface etc. complete as directed. Size of the S.S. & Paise Fifty Two Only

letters shall be as described in tender item. Coating of the S.S. letters shall be as

directed by engineer in charge. Letter shall be fixed at any height as directed by

engineer in charge.

148 Providing I.S.I mark 7 levers three keys brass pad lock of NAVTAL (Goderej) make 47.00 No. 243.64 Rs. Two Hundred Forty

65mm dia on completion of project. Three & Paise Sixty Four

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

149 Providing and fixing ball cock of approved quality as directed. (A) Copper Metal ISI 2.00 Each 187.96 Rs. One Hundred Eighty

Mark. (ii) 50 mm dia. Seven & Paise Ninety Six

150 Providing Supplying and fixing Single Pipe Bracket System with U Bolt Rubber 75.00 No. 182.83 Rs. One Hundred Eighty

Mounted for Pipe supporting clamping system for external vertical Fixed line with Two & Paise Eighty Three

wall distance 3" including nuts, bolts, fasterners etc complete as per detailed

specification and as directed by Engineer in charge.

151 Providing Supplying and fixing S4 Channel system ( S4 channel + Profile Bracket + U 70.00 No. 421.58 Rs. Four Hundred Twenty

Bolt Rubber Mounted System) for multiple pipes for external vertical fixed line with One & Paise Fifty Eight

wall distance 3" including nuts, bolts, fasterners etc complete as per detailed

specification and as directed by Engineer in charge.

152 Providing and Laying 80mm thick Rubber Mould Paver Block of M-30 grade made by 197.00 Sqm 700.54 Rs. Seven Hundred & Paise

Block making machine with strong vibratory compaction and of approved size and Fifty Four Only

design in required colour and pattern over and including 50mm thick compacted

bed of course sand etc. complete as directed by engineer in charge

153 Providing and fixing pre-cast concrete Kerb Stone of gray cement based concrete 99.00 Rmt 371.21 Rs. Three Hundred Seventy

block 30cm length, 30cm height and 15cm thick of M250 grade concrete as per One & Paise Twenty One

approved design and including excavation for fixing in proper line and level, filling

the joint with C:M 1:3 (1cement :3fine sand) etc complete.

154 Providing and filling brick bats in sock well as per drawing and specification.etc 9.00 Cum 509.42 Rs. Five Hundred Nine &

complete Paise Forty Two Only

155 Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and painting 10.00 Cum 205.60 Rs. Two Hundred Five &

with two coats of Anti-corrosive paint etc. complete. Paise Sixty Only

156 Providing and fixing precast RCC cover including angle frame of 40 x 40 x 3 mm 3.00 No. 1932.00 Rs. One Thousand Nine

section and C.C. 1:1.5:3 precast RCC cover for I.C. and M.H. chamber etc. including Hundred Thirty Two Only

8 mm. HYSD steel at 15 cm. c/c both way and oil painting of angle frame and

finishing of concrete. (60x60x7)

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

157 Providing and laying Plantations including providing and fixing tree guard.. Rates 80.00 No. 600.00 Rs. Six Hundred Only

are also inclusive of maintaining the plants in live condition at the time of the

execution of the building. i.e. Initial starting time. [The tree shall be planted].

158 Providing and laying loan for land scrapping including watering for all floors. 625.00 Sqm 150.00 Rs. One Hundred Fifty Only

159 Box cutting the road surface to proper slope and camber for making slope and 154.00 Cum 110.91 Rs. One Hundred Ten &

camber for making a base for road work including removing the excavated stuff and Paise Ninety One Only

depositing on the road side slope as directed upto 50 Mt. lead.

160 Providing , supplying & Laying Granular Sub base ( GSB) by providing couarse 56.00 Cum 1106.12 Rs. One Thousand One

graded material , spreading in uniform layer with motor grader on prepared surface Hundred Six & Paise

Twelve Only

mixing by mix in place method with rotavator at OMC and compacting with vibratory

roller to achieve the desired density complete as per morth specification

161 Supplying of graded stone aggregate of following sizes. (for W.B.M.) (3)Crushed 57.00 Cum 890.66 Rs. Eight Hundred Ninety &

stone aggregate for hard quality up 40mm to 63mm size. Paise Sixty Six Only

162 Spreding the stone aggregate for soling and W.B.M incl. filling the interstics forming 42.00 Cum 265.83 Rs. Two Hundred Sixty Five

the surface to required camber and gradient (ii) 40mm to 63mm size. & Paise Eighty Three Only

163 supplying of murrum on W.B.M surface etc comp 13.00 Cum 305.60 Rs. Three Hundred Five &

Paise Sixty Only

164 Spreding blidage or road crust filling the gaps in metal and leveling to cambert and 13.00 Cum 156.96 Rs. One Hundred Fifty Six

gradient as directed (i) murrum & Paise Ninety Six Only

165 Rolling and consolidation water bound macadam (except laterite and 1120.00 Sqm 26.60 Rs. Twenty Six & Paise

Kankar)including watering not exceeding 150 mm thickness (Main layer including Sixty Only

binding materials) including filling in depression which occur during the process.

(b) With power roller exceeding 8 tonne and not exceeding 12 tonne.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

166 Construction of concrete road using trimix system having of any thickness M-300 113.00 Cum 4534.38 Rs. Four Thousand Five

concrete mix with providing and fixing & removing of "C" channel having size 75mm Hundred Thirty Four &

Paise Thirty Eight Only

x 75mm as per required level slope and thickness of concrete road floor leveling of

place concrete with surface vibrator machine, dewatering system device finishing

with power floater machine and trowel light brooming on the surface as directed

with providing expansion joint size 20 x 190mm using of concrete cutter machine inc

curing etc.complete.rate are also inclusive of providing and mixing plastisizer of

approved make in proportion as per mix design .

167 Providing & fixing 25mm dia backup rod having minimum density 22kg per cum 32.00 Rmt 17.62 Rs. Seventeen & Paise Sixty

(ASTMD-3575)& Compression strength of 0.40kg per sqm (ASTM-5249) and finishing Two Only

with polysulphide sealant etc.comp for 20mm wide expansion joint

168 Providing & making & Cutting the road surface of any required depth & thickness 317.00 Rmt 36.80 Rs. Thirty Six & Paise

with machine cutter & fiiling it with sealant etc. complete as per direction of Eighty Only

Engineer incharge.

169 Providing and fixing CAPCELL HD - 100 pre-moulded compressible filler board in 6.50 Smt 795.27 Rs. Seven Hundred Ninety

black colour confirming to MoRT&H Specifications (Clause 1015), having minimum Five & Paise Twenty Seven

density 95kg/cum.metre, non-staining with less than 1% water absorption &

compression recovery of 93% minimum as per specification for 20 mm wide

expansion joint including cutting to required size and shape at all levels etc.

complete as directed.

170 Drilling of 200 / 215 mm dia. bore well in over burden rocky or loose collapsible / 200.00 Rmt 414.00 Rs. Four Hundred Fourteen

boulder strata & lowering of 175 / 200 mm dia. UPVC / PVC / ERW casing pipe Only

above 12 meters and up to 40 meters depth by DTH rig etc.complete.For Zone-I

171 Manufacture, supply & delivery of ISI marked UPVC 175.00 mm nominal dia. " CS " 106.00 Rmt 906.00 Rs. Nine Hundred Six Only

Type Casing pipe (IS 12818)with latest amendment.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

172 Lowering and removing of 100 mm dia dropline and 32 mm dia airline for 100.00 Rmt 148.00 Rs. One Hundred Forty

development of each water bearing zone come across up to the full depth of deep Eight Only

tube well of size 200 mm dia. for the tubewell up to 185 meter depth through suitable

air compressor. The job is for compete period of development.( where water is very

deep and 2/3rd submersion is not achived.)

* All the required accessories, machineries etc for above job will have to be

provided by contractors.

173 The job is for suitable air compressor complete period of development. 1.00 Job 22205.00 Rs. Twenty Two Thousand

Two Hundred Five Only

174 Geophysical Survey for pin point for bore well including survey done by GWSSB 1.00 Job 3571.00 Rs. Three Thousand Five

department with ralay repail of pin point location including fees to GWSSB Hundred Seventy One Only

department & Transportation charges.

175 Supply of Gravel having size 4 mm to 6mm size 1.00 Cum 2029.00 Rs. Two Thousand Twenty

176 Providing and Corrogulated JSW pre coated sheet roofing fixed withh galvanised 81.00 Smt 1022.99 Rs. One Thousand Twenty

iron J or L hooks, bolts and Nuts 8 mm dia with bitumin and G.I. Limpet washer or Two & Paise Ninety Nine

G.I. limpet washer with white lead complete excluding the cost of Purlines , rafters

and trusses(0.60mm thick)

177 Providing, laying, testing & commissioning of "C" Class Heavy Duty G.I. pipe

Confirming IS 1239 fittings likes elboes, tees, flanges, tapers, nuts, bolts, gaskets etc

in ground including welding, excavation & providing cement concrete blocks as

supports, anticorrosive treatment with coltar/asphalt tapeas per IS 10221 or

Wrapping coating material 4mm thick on pipe , refilling the treanch etc. complete as

per direction of engineer in charge.

(A) 200 mm dia 20.00 Rmt 4248.53 Rs. Four Thousand Two

Hundred Forty Eight &

Paise Fifty Three Only

(B) 150 mm dia 100.00 Rmt 2561.95 Rs. Two Thousand Five

Hundred Sixty One & Paise

Ninety Five Only

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

(C)100 mm dia. 15.00 Rmt 1870.20 Rs. One Thousand Eight

Hundred Seventy & Paise

Twenty Only

178 Supplying, fixing, testing and commissioning of Butterfly valve of PN 1.6 rating with

bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets

conforming to IS 13095 of follwing sizes as required :

(A) 100 mm dia 2.00 Set 5845.97 Rs. Five Thousand Eight

Hundred Forty Five & Paise

Ninety Seven Only

(B)80 mm dia. 2.00 Set 4368.46 Rs. Four Thousand Three

Hundred Sixty Eight &

Paise Forty Six Only

179 Providing, fixing, testing and commissioning of Non-Return valve of following sizes

conforming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as

(A) 150 mm dia 2.00 Set 15594.79 Rs. Fifteen Thousand Five

Hundred Ninety Four &

Paise Seventy Nine Only

(B)100 mm dia. 2.00 Set 9688.87 Rs. Nine Thousand Six

Hundred Eighty Eight &

Paise Eighty Seven Only

180 Providing and fixing single headed internal Hydrant valve with instantaneous 2.00 Set 5382.66 Rs. Five Thousand Three

Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked Hundred Eighty Two &

Paise Sixty Six Only

conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain

as required. Single headed Stainless Steel

181 Providing and fixing 63mm dia Gun metal short branch pipe with 20 mm nominal 2.00 Nos 1457.27 Rs. One Thousand Four

internal diameter size nozzle conforming to IS 903 suitable for instantaneous Hundred Fifty Seven &

Paise Twenty Seven Only

connection to interconnect hose pipe coupling as required:Stainless Steel (Grade

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

182 Supplying and fixing 63 mm dia, 15 m long RRL Hose pipe with 63 mm dia male and 2.00 Nos 3899.90 Rs. Three Thousand Eight

female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) Hundred Ninety Nine &

Paise Ninety Only

as required:

Stainless Steel (Grade 304)

183 Providing, fixing, testing and commissioning of Weather proof standard fire Hose 2.00 Nos 5100.00 Rs. Five Thousand One

Cabinet wall mounting type(750mm x 600mm x 250 mm deep) having single Hundred Only

opening with M.S. Fabricated Stand, necessary locking arrangement by allan key

suitable for housing 2 nos. hose pipe, 1no. Branch pipe & nozzle spaner.

184 Supply and fixing Orifice plate made out of 6mm thick stainless steel (Grade 304) 1.00 Nos 1158.53 Rs. One Thousand One

with orifice of required size to be fitted between flange and landing valve of external Hundred Fifty Eight & Paise

Fifty Three Only

and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm²

complete as required.

185 Supplying and fixing First Aid hose reel with MS construction spray painted in post 2.00 Nos 7606.61 Rs. Seven Thousand Six

office red, conforming to IS 884 with upto date amendments, complete with the Hundred Six & Paise Sixty

following as required. 30m long 25mm (nominal internal) dia water hose

thermoplastic (textile rainforced) type-2 as per IS: 12585 25mm (nominal internal)

dia S.S.Shut up valve & nozzle. Drum and brackets for fixing the equipments on wall.

Connections from riser with stop valve (GM) & M.S. pipe.

186 Supply, Installation, Testing & commissioning of test & drain assembly with all 2.00 Set 6708.11 Rs. Six Thousand Seven

piping, sight glass, 25mm dia, Test and Drain/Gate Valve complete etc. Hundred Eight & Paise

Eleven Only

187 providing & fixing Emergency escape signes/ printed on rigid PVC sheet / acrylic

sheet 4 mm thick photoluminescent auto glow type of approved quality including

fixing on door, wall, celling complete with installation as directed.

A. Escape Signes/Fire Signes 6400.00 SQ.INC 7.95 Rs. Seven & Paise Ninety

188 Supplying, Installing, Testing and commissioning of Heavy Duty foot valve with 1.00 No. 10486.98 Rs. Ten Thousand Four

flanges, Nut Bolts, Gaskets etc. with necessary complete accessories, 150mm dia. Hundred Eighty Six & Paise

Ninety Eight Only

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

189 Providing, fixing and testing of Air Vessel made of 250 mm dia, 8 mm thk sheet, 1200 1.00 No. 15996.45 Rs. Fifteen Thousand Nine

mm in height with Air Release Valve in top & connection to riser, drain arrangement Hundred Ninety Six & Paise

Forty Five Only

with 25 mm GM wheel valve with required accessories, pressure gauge, painting,

etc. compelte

190 Providing, laying, testing & commissioning of "C" Class Heavy Duty G.I. pipe

Confirming IS 1239 including welding, fittings likes elboes, tees, flanges, tapers,

nuts, bolts, gaskets etc and fixing the pipe on the wall/ceilling with suitable

clamp/supports frame and painiting of one coat of primer & 2 or more coat of

synthetic enamel paint of approved make/shade complete as per specification.

(A) 100 mm 15.00 Rmt 1367.39 Rs. One Thousand Three

Hundred Sixty Seven &

Paise Thirty Nine Only

(B) 80 mm 15.00 Rmt 1095.47 Rs. One Thousand Ninety

Five & Paise Forty Seven

191 Getting provisional NOC and Final NOC and Renewal of NOC (During Defect 1.00 Job 16950.00 Rs. Sixteen Thousand Nine

Liability Period) for Fire Hydrant,Sprinkler system, Fire Extinguisher, Fire alarm Hundred Fifty Only

system etc. from local fire authority or any other relevant statutory authority atinitial

stage and required various other stages of construction work, including preparation

of reports /drawings as perfireauthority requirement. Rate also include srenewal of

Fire NOC during defectliability period as per requirement. Main agency has to give

demonstration of all fire system to fire officer police / concern beneficiaries &

GSPHCL. Agencyhas to submit FDR of approved bank as per clause 2.0, section 3, of

Rs 20000.00 OrQuoted rate which ever is higher to GSPHCL for minimum

maturitperiod of Four yearsin favour of GSPHC, which will be released after

Successful Submitting of All Fire NOC at the completion of defectliability period.

Renewal Fire N.O.C. shall be submitted final S.D.proposal. Agency has to borne

charges like preparing and submission of all the documents, Photographs, CD/DVD

required to getthe N.O.C. from concern fire department and also liaisoning work

with concern departments.Maincivilagencyhastogetthepre-

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

NOC from fire & emergency department well before starting civil & the fire hydrant

work including sump &pumproom work. For hat rofessional & experience fire

agency has to repare drawing of fire hydrant system ,sprinkler

system,firealarmsystem,DGsetetc.as pertenderitem and making floor layout of all

fire pump panel, cable earthing etc in pump room. If any changes required in

drawings of sump & pump room. Main agency has to inform in written before

excavation of pump & sump room. Agency has to calculate the total head& discharge

required as per NBC/local fire office requirement and as per site situation and

submit fire pump OEM specification curve foundation detail etc & get approval of

cable, panel drawings & specification. After completion of fire hydraunt relate

dworkasperpre-NOC, tenders pecification & drawing approved by fire department,

agency has to dosite visit with fire department & give the testing & demonstration to

fire officer & getthe final NOC before handing over of the building. Agency has to

give live testing & demonstration of all system to GSPHCL& police department

jointly.For fire NOC fee separate item is taken in tender. Agency has to quote the

rate as per latest Gazettein respective tender item.

192 Supplying and fixing 4 way Fire Brigade service inlet connection of CI body with gun 2.00 Nos 12252.93 Rs. Twelve Thousand Two

metal instantanoeus male inlet coupling complete with chain & cap as required for Hundred Fifty Two & Paise

Ninety Three Only

suitable MS pipe (150 mm) connection conforming to IS 904 as required

(A) Total Amount of Civil Work Rs.

(A) Total Amount of Civil Work Rs.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Electrical Item

Providing & Erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm

copper PVC insulted FRLS-H wire with 1.5 sq. mm (green) copper PVC insulated

FRLS-H wire for earth continuity in FIA approved ISI mark medium class white colour

20/25 mm dia. embossed rigid PVC pipe with PVC fitting fixed with adhesive

solution erected on/in Brick Wall / slab along with continuous G.I. fish wire to draw

wires and laid in approved manner zari for PVC pipe and boxes shall be filled with

cement mortar and finishing the surface to match the wall / ceiling complete with

RS: Six Hundred Five

193a approved make 5/6 Amp. ISI mark modular type switch and accessories mounted in 270.00 Point 605.00

20 G. G.I. company fabricated metallic box covered with appropriate front plate only

modules erected flushed with wall / ceiling with necessary modular lamp holder /

modular ceiling rose / HD Connector 75 mm deep GI box as per requirement ( make

& model approved by EIC and matching colour with switches accessories) as

directed for concealed wiring. Light point. Cat.-III.(Conductor resistance should be

as per IS:8130/1984 )

Necessary sheet cover must be erected on all box to prevent mortar going into the

box.& for ceiling light Point use deep Junction box of same PVC Pipe make . Length

of point wiring must not increase than 10 mtr. For that necessary switch boards and

their locations must be finalised before execution by agency otherwise payment will

not be done for extra long point. (For future extention, if required, agency has to

erect one higher size metal box and modular plate as per instruction of EIC. Cost of

blank plate shall be paid as per tender item) [Wire must be having box

packing][This item include cleaning(inside/outside) of all GI switch boards,electric

point box,fan box & box cutting plaster arround modular plate without any gap]

(Light Point Cat-III)

For Secondary Light Point Cat.-III RS: Two Hundred Eight

193b 35.00 Point

For Bell Point Cat.-III RS: Six Hundred Five

193c 5.00 Point

For Fan Point (with 6 A. Modular type switch and two module hum free EME Rotary

RS: Eight Hundred

193d Five step type electronic fan regulator both having ISI mark) Cat.-III 80.00 Point 842.00

Forty Two only

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat.-III

RS: Six Hundred Thirty

193e 22.00 Point

For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI

RS: Three Hundred

193f mark) Cat.-III. 90.00 Point 306.00

Twenty One only

Providing and erecting 1.5 mm thick FIA approved and ISI mark (embossed) RIGID

white Colour PVC PIPES of following size complete erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution concealed in wall / slab along

with contineous fish wire to draw mains, laid in approved manner with plastering by

RS: Twenty Four

194a cement mortar & finishing the surface to match the wall / ceiling. 20 mm dia. 950.00 Mtr.

For 25 mm dia. RS: Thirty Three

Providing & Erecting Mains with approved make FRLS-H PVC Insulated wire ISI

marked 1.1 KV grade with FIA approved ISI mark medium class 20/25/32 mm dia.

embossed rigid PVC pipe with same company PVC fitting fixed with adhesive

solution to be erected on/in brick wall / slab along with continuous G. I. fish wire to

draw mains Zari work & plastering by cement mortar & finishing the surface to

match the wall / ceiling complete (Conductor resistance should be as per RS: Eighty One

IS:8130/1984 ) [a] 2 x 1.5 sq.mm. FRLS-H copper multi stranded conductor mains with 750.00 Mtr.

1.5 sq.mm. FRLS-H copper multi stranded conductor for earthing as per standard

colour code. (with 20 mm dia. PVC pipe) [Wire must be having box packing]

For 2 x 2.5 sq.mm. FRLS-H copper multi stranded conductor mains with 1.5 sq.mm.

FRLS-H copper multi stranded conductor for earthing as per standard colour code.

RS: One Hundred Eight

195b (with 20/25 mm dia. PVC pipe as per requirement) [Wire must be having box 575.00 Mtr. 108.00

packing] (Conductor resistance should be as per IS:8130/1984 ) only

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

For 2 x 4.0 sq.mm. FRLS-Hcopper multi stranded conductor mains with 2.5 sq.mm.

FRLS-H copper multi stranded conductor for earthing as per standard colour code.

RS: One Hundred Forty

195c (with 20/25 mm dia. PVC pipe as per requirement) [Wire must be having box 300.00 Mtr. 145.00

packing] (Conductor resistance should be as per IS:8130/1984 ) Five only

For 2 x 6.0 sq.mm. FRLS-H copper multi stranded conductor mains with 2.5 sq.mm.

FRLS-H copper multi stranded conductor for earthing as per standard colour code.

RS: One Hundred

195d (with 25 mm dia. PVC pipe as per requirement) [Wire must be having box packing] 350.00 Mtr. 192.00

(Conductor resistance should be as per IS:8130/1984 ) Ninty Two only

For 2 x 6.0 sq.mm. FRLS-H copper multi stranded conductor mains with 2.5 sq.mm.

FRLS-H copper multi stranded conductor for earthing as per standard colour code.

RS: Three Hundred

195e (with 25 mm dia. PVC pipe as per requirement) [Wire must be having box packing] 150.00 Mtr. 339.00

(Conductor resistance should be as per IS:8130/1984 ) Thirty Nine only

Providing & fixing 20 mm. dia. PVC insulated G.I. Corrugated Flexible pipe with

necessary socket, PVC bushes, saddle, Check-nuts etc. complete of following sizes.

196a 50.00 Mtr. 31.00 RS: Thirty One only

Providing & fixing 25 mm. dia. PVC insulated G.I. Corrugated Flexible pipe with

necessary socket, PVC bushes, saddle, Check-nuts etc. complete of following sizes. RS: Thirty Seven

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Providing and erecting Plug Point wiring with 1.1 KV grade ISI marked approved

make 2 x 2.5 sq.mm copper PVC insulated FRLS-H wire with 1.5 sq.mm (green)

copper PVC insulated FRLS-H wire for earth continuity in FIA approved ISI mark

white colour medium class 20/25 mm dia. rigid PVC pipe with same band PVC

fitting fixed with adhesive solution erected in brick wall/slab along with continuous

G. I. fish wire to draw wires and make plaster zari for PVC pipe & boxes shall be

filled with cement mortar & finishing the surface to match the wall / ceiling complete

RS: Nine Hundred

197 with 16 Amp Modular type Swich and accessories mounted in 20 G. GI company 20.00 Point 930.00

fabricated metallic box covered with appropriate front plate modules erected Thirty only

flushed with wall. (a) 16 Amp. indicator switch & 1 No. 6/16 A universal socket white

colour suitable for 3 pin top duly both having ISI mark. (Necessary Sheet Must Be

Erected On All Box To Prevent Mortor Going In To The Box) Cat.-III.

Providing and erecting Plug Point wiring with approved ISI marked 1.1 kv grade 2 x

4.00 sq.mm copper PVC insulated FRLS-H wire with 2.5 sq.mm (green) copper PVC

insulated FRLS-H wire for earth continuity in FIA approved ISI mark white colour

medium class 20/25 mm dia. igid PVC pipe with same band PVC fitting fixed with

adhesive solution erected on/in brick wall /slab along with continuous G.I. fish wire

to draw wires and make plaster zari for PVC pipe & boxes shall be filled with

cement mortar & finishing the surface to match the brick wall / ceiling complete with RS: One Thousand

198 16 Amp Modular type Swich and accessories mounted in 20 G. GI company 2.00 Point

Eighty Seven only

fabricated metallic box covered with appropriate front plate modules erected

flushed with wall. (a) 16 Amp. indicator switch & 1 No. 16 Amp. universal socket

white colour suitable for 3 pin top duly. Cat.-III (Necessary Sheet Must Be Erected

On All Box To Prevent Mortor Going In To The Box)(AC/Gyser point)

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of

mm dia in soft soil. Suitable for pipe-in-pipe technology earthing.Earth electric rod

must be made from Corrosion free Hot dip galvanizing pipes having following

specification.

(A) Earth Electrode: outerpipe:- minimum 88mm O.D ,'B ' Class ISI mark of Reputed

Brand, Inner pipe:- 42 mm minimum O.D, Pipe B Class ISI mark reputed Brand

Terminal Size: 70mm X 100mm length, Terminal Should be made from inner pipe for

that pipe must be pressed and give rectangular shape so its work as a terminal.The

hot deep galvanising must be done after above process.Galvanised thickness must

be minimum 75 micron any where. SS Nut bolt:- 2 no.with washer suitable for 14mm

dia. hole must be provided at terminal. total minimum Weight(approx.) of earth

RS: Seven Thousand

199a electrodewith inside conductive material should be 26kg. 8.00 Each 6000.00

Twenty Five only

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/ meter testing as per

IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound :-Earthing compound should be capable to retain moisture

for long time Back Filling Compound weight is 25 Kg. Necessary test report must be

submitted.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

. Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification only] [OEM

has to submit all detail & sample for approved before supplying]

[Water must be poured in bore before starting earthing. Earthing value must be

measured with earth tester. Agency has to bring the earth resistance to at least

ohms & voltage between neutral & Earthing upto 02 volt. Agency has to maintain

earthing & its value for one year. Earthing must be done in the presence of A.E.

SITC(D) Chamber and cover :-Earthing chamber heavy duty PVC/CC/Brick

masonary should be size of 400mmX400mmX400mm depth and Cover should be RS: One Thousand twenty

199b heavy duty cast iron with required size of 300mmX300mmX4mm thick. 8.00 Each

For Above Earthing Additional charges for boring in hard rock soil (By Breaker) &

filling soft soil in earth pit. (Certificate for soil have to given by DEE/AE along with

RS: Three Hundred

200 Photographs). 8.00 Each 325.00

Twenty Five only

Supplying and erecting M.S./G.I. metal box having 16 Gauge painted with red oxide

be concealed in wall with necessary plastering & finishing with 3 mm thick laminated RS: Five and Paise

201 sheet with grooving as directed of following depth 3" depth. 500.00 Sq. Inch

Ninty Four only

Providing following type of Modular Type Accessories mounted with 20 G company

fabricated GI metalic box, single mounting base frame covered with textured /

RS: One Hundred Fifty

202a metallic front plate, modules erected with necessary connection. As instructed by 5.00 Each 159.00

Engineer in charge. a) TV Co-axial Socket outlet. Cat.-III Nine only

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

For Blank plate single, CAT-III

RS: Twenty Five

202b 100.00 Each

For Two pin / RJ-11Telephone Socket (For One Gang) Cat III RS: One Hundred Fifty

202c 30.00 Each

Nine only

For Modem Jack for Computer Open RJ-45 Cat III RS: One Hundred Fifty

202d 48.00 Each

Nine only

For 16Amp. Universal socket. Cat.-III (For AC Points) RS: One Hundred

202e 13.00 Each

Ninty Eight only

For 16/20/25 Amp. Modular Starter for Motor / A.C. Unit Complete Cat.-III RS: Four Hundred

202f 13.00 Each

Ninty Three only

For Modular indicating call bell Cat.-III RS: Three Hundred

202g 5.00 Each

Twenty Six only

For Modular Buzzer Cat.-III RS: One Hundred Forty

202h 5.00 Each

Eight only

Providing and erecting modular type accessories mounted on 20G G.I. company

fabricated galvanised metal box covered with approriate front plate modules

RS: Seven Hundred

203 erected flushed with wall/Ceiling with 1 Nos. of 16 Amp SP indicator Switch & 3 Nos. 6.00 Each 744.00

of 6 Amp 3/5 pin plug. [For TV Switch board] Cat.-III Forty Four only

Providing & Erecting following size of TV Co-axial flexible cable comprising inner

conductor of solid bare copper insulated with Foam PE & Secondary conductor made

of poly - Aluminium film bonded Al. Braids @ suitable coverage overall sheathed RS: Thirty Nine

204 with black PVC insulation. (FINOLEX / POLYCAB / RRKABEL) [b] RG-6 250.00 Mtr.

Supplying & erecting Sintex or approved make SMC press moulded composite FRP.

loop-in, loop-out approx. 2mm thick box complete with bakelite connector strip

4way & hinged doors having locking arrangements with mounting clamp with nuts, RS: Five Hundred Ten

205 bolts & washers suitable for erection on pole with cable clamps& earth bolt of 8.00 Each

following size of box. (b) 250 mm x 200 mm x 100 mm [deep]

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Supplying & erecting approved make street light box comprising CNC Processed

robust housing made FRLSom single sheet multi folded with high grade powder

coating (RAL-7032 Structure finish as Standard) of IP-55 degree of Protection Gasket RS: One Thousand Six

206a (PU Gasketing) of following size of Box. [i] 350 mm X 200 mm X 150 mm [Make and 2.00 Each

Hundred Forty Six only

model approved by EIC strictly as per tender specification]

For 200mm X 150 mm X 100 mm RS: Eight Hundred

206b 2.00 Each

Twenty Seven only

Providing & erecting Switch board for Computer or electric apparatus consisting of

following items in single board erected on 20 G. G.I. company fabricated metallic

box erected with appropriate front plate modules erected flushed with wall as

RS: One Thousand One

207 directed. 1 no. 6/16 Amp. universal Socket, 1 no. 13 Amp. international socket, 2 nos. 40.00 Each 1122.00 Hundred Twenty Two

16 Amp. indicator switch, 2 nos. 6 Amp. Switch & 2 nos. 6 Amp. 5 pin Plug. For only

Computer power Supply board. Cat.-III

SITC of specified make Cat - 6 voice /data cable to be done in prelaid PVC pipe /

raceway , but without the cost of raceway or pipe ( the wire is to be drawn from

MFD/ JB to outlet point) (a) CAT - 6-Y Colour ( For Voice Cabling ) & X -Colour(For RS: Forty Seven

208 Computer Data Cable) ( 1000.00 Mtr

Molex/Avaya/Systimax/Legrand,D-link make)

SITC of 24 x 10/100/1000BASE-T ports

4 x Gigabit RJ45/SFP Combo ports

Advanced L2 switching and security features RS: Fifteen Thousand

209 L2+ Static Routing 3.00 Each 15247.00 Two Hundred Forty Seven

Optional “standard mode” or “surveillance mode” management user interface only

(Netgear,Cisco,D-Link make)

SITC of Jack Panel, fully loaded with 24 nos. UTP ports for PCB based IO Jacks (RJ45,

TIA-568C Category-6, Installation and Termination of all 24 nos. Catergory-6 UTP

unloaded with individually replaceable 24 nos. Category-6 I/O Jacks complying with RS: Four Thousand

210 TIA-568.C.2, as per given jack specification Shall be suitable for loading unshielded 3.00 Each 4357.00 Three Hundred Fifty Seven

& shielded jacks for different category systems (Netgear,Cisco,D-Link make) only

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug 30U' Snag

less(Molex/Avaya/Systimax/Legrand,D-Link make) RS: One Hundred

Ninty Nine only

SITC of CAT6 UTP 24AWG PATCH CORD:1M,Plug 30U' Snag

RS: One Hundred Fifty

212 less(Molex/Avaya/Systimax/Legrand,D-Link make) 48.00 Each 155.00

Five only

Supply and installation of 9U steel rack for installing 4 nos. Ethernate switches/Hubs.

The Rack should be fully enclosed steel housing fabricated with 16 SWG sheet and

powder coated with glass doors and having wire management systems. The rate

RS: Eleven Thousand

213 includes the Exhaust Fan, 2 nos. 4 socket and 1 switch power strip and all the wiring 2.00 Each 11441.00 Four Hundred Forty One

in the rack. (Rittal,Valrack,APC,Legrand ,Elixer,APC,D-Linkmake) only

Supplying & erecting Delton or approved make Telephone Cable electrolytic

copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape

& sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring &

confirming to C-DOT erected in existing pipe. of following size of conductors &

RS: One Hundred

214 nos.of pairs. With necessary connections.(a) Conductor Size 0.5 mm armoured Ten 75.00 Mtr.

Twenty Four only

Pairs.[make and model approved by EIC strictly as per tender specification]

For Conductor Size 0.5 mm armoured Twenty Pairs.[make and model approved by

EIC strictly as per tender specification] RS: One Hundred

Ninty Eight only

Providing & erecting Tag Box for Telephone Lines suitable for 50 Pairs Krone type RS: One Thousand

216 complete with Krone & locking arrangements. 1.00 Each 1730.00 Seven Hundred Thirty

Termination and Testing of CAT 6 data socket I/o as per industries with ferruling for

Pyrotech table,including cost of Site Visit for Work and Service up to defect laibility

217 period. 37.00 Each 68.00 RS: Sixty Eight only

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Termination and Testing of RJ 11 Telephone socket as per industries with ferruling

for Pyrotech table,including cost of Site Visit for Work and Service up to defect

218 laibility period. 37.00 Each 42.00 RS: Forty Two only

Supplying and Erecting LED indoor fitting having 1100mm long with LED of wattage Mashroom shape 0.2W

to 0.5W assemble on single MCPCB with housing use as a heat sink shall be made from white powder

coating Aluminum extrusion having enough strength (sample must be approved by EIC)with polycarbonate

diffuser with following specification:

(A) Company mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C) Rated input wattage: max. 24w

(D) Rated input current : 0.2 Amp

(E) Power Factor : Min.

(F) ATHD :Max. 15%

(G) Rated Luminous flux: Min. 2420 lm

(H) CCT: 6500K

(I) CRI: Min. 80Ra

(J) Driver Efficiency: Min. 80% RS: Three Hundred

219 (K) LED life span: Min. 50000 Hrs @ L70 (Certificate shall be attached) 90.00 Each

Seventy only

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M) Surge protection : Min. 2KV(N) IP rating: IP

(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be provided

(Q) Fixing Clamp min.12mm wide heavy duty design & strength should be sufficient to hold the fitting

erected on wall or ceiling (R) 3 core x 1.0 Sqmm copper wire

with min. 1ft (300mm) earthing connector.

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to submit 5 yrs free

replacement Guarantee for complete Fixture) [Approval will be given strictly subject to item specification]

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

SITC of Indoor Commercial Recess / Surface mounted (IP20) 24 W Cool/Natural

white/Warm (6K/4K) white Color back lit LED Down lighter with BIS approved

separate potted driver with single piece pressure die cast aluminium alloy housing

(no plastic part allowed) with corrosion resistant powder coated finish with

PMMA/PS/Injection moulded Polycarbonate diffuser with high brightness LED

complete (LED from Philips Lumileds, CREE, Nichia, Bridgelux, Seoul & Osram) CRI

> 80, CCT 6K/4K. The LED's should be mounted on back lit metal core PCB for better

heat conduction and long life of LED. Test report of shall be submitted (LM 79 for

complete fixture, for individual LED). The Fixture have protection like miswiring,

over voltage, over load , IP20 wrong wiring, THD < 15%,, P.F > 0.95, efficiency ≥

lm/w & driver efficiency > 85%. For 24 W fixture wide voltage range from 180 V to

270 V, 50/60 HZ @ 240V, 4 KV surge protection.

RS: One Thousand One

220 The fixure must have min. 2400 lumen light output. The fixture should be provided 85.00 Each 1159.00

Hundred Fifty Nine only

with external separate Potted driver, latest Valid BIS approved Luminaire and driver.

The Fixture efficiency ≥ 90 lumens/watt only for safety and performance. (L70 @

50,000 Hrs.) The fixture should be able to easily mount on POP / Grid false ceiling.

The Luminiare should be tested as per IP 20 and following test reports should be

submitted at the time of approval: heat resistant test, thermal test, Ingress protection

test, IK test, Photobiological report with 3 core X 1.0 Sq.mm. flexible wire as per site

requirement [Note:-The manufacturer / authorized Channel partner of the

manufacturer has to submit 5 yrs. free replacement Guarantee for complete Fixture

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

SITC of Indoor Commercial Recess / Surface mounted (IP20) maximum 18 W

Cool/Natural white/Warm white Color LED Down lighter office Lighting Luminaire

with separate potted driver with single piece pressure die cast aluminium alloy

housing with corrosion resistant powder coated finish with PMMA/PS/Injection

moulded Polycarbonate diffuser with high brightness LED complete (LED

approx.6K/4K from Philips Lumileds, CREE, Nichia, Bridgelux, Seoul & Osram) CRI >

80, CCT 5600K (5400 to 5800K bin). The LED's should be mounted on back lit metal

core PCB for better heat conduction and long life of LED. The Fixture should comply

all International Standarad third party (LM 79 for complete fixture, LM80 for

individual LED). The Fixture have protection like miswiring, over voltage, over load,

wrong wiring, THD < 15%,, P.F > 0.95, efficiency ≥ 100 lm/w & driver efficiency >

85%. For 18 W fixture wide voltage range from 180 V to 270 V, 50/60 HZ @ 240V

RS: One Thousand

221 application, 4 KV surge protection. 45.00 Each 1027.00

Twenty Seven only

The fixure must have min. 1800 lumen light output. The fixture should be provided

with external separate Potted driver, latest Valid BIS approved Luminaire and driver.

The Fixture efficiency ≥ 90 lumens/watt only for safety and performance. (L70 @

30,000 Hrs.) The fixture should be able to easily mount on POP / Grid false ceiling.

The Luminiare should be tested as per IP 20 and following test reports should be

submitted at the time of approval: heat resistant test, thermal test, Ingress protection

test, drop test, Photobiological report with 3 core X 1.0 Sq.mm. flexible wire as per

site requirement [Note:-The manufacturer / authorized Channel partner of the

manufacturer has to submit 5yrs. free replacement Guarantee for complete Fixture

Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to

voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp RS: One Hundred

222 holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP 50.00 Each

Eleven only

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Providing and erecting max. 10 watt LED battern having main housing having

powder coated aluminium extruded & mashroom shape polycarbonate diffuser.

Electrically & photomatry parameters are as undr: 240 V, 50 Hz, System wattage 10 w

± 10 %, PF ≥ 0.95, system luments min. 1000, CCT- 3000K to 6500K, CRI ≥ 80, THD ≤

15%, delivery efficiency ≥ 85%, L80 Certified LED, 30000 hrs. @ L70, Electronic CC

driver, 3 core insulated copper wire for internal wiring, IP20, operating voltage:

RS: Three Hundred

223 to 270 V, Surge - 2 KV, Fixing Clamp min.12mm wide heavy duty design & strength 2.00 Each 309.00

Nine only

should be sufficient to hold the fitting erected on wall or ceiling,Length of fitting

should be min.600mm,3 core x 0.5 Sqmm copper wire with min. 1ft (300mm) &

earthing connector.

Providing and erecting PVC body surface mounting LED Bulk head type 9 watt

Lighting Fitting with electronic driver having THD < 15%, CRI>80, P.F.0.95 And

lumen output from luminaire 720 lm, input voltage range 160-270 V AC, 50 Hz cool RS: Seven Hundred

224 white (3000 to 6500 k), inbuilt driver having efficiency >=80lm/w, -20 deg C to + 60 4.00 Each

Eighty only

deg C working temperature, AL frame with Beam Angle 120 deg.

Providing and erecting decorative wall bracket fittings complete with LED lamp and

rust free fittings components mounted in chrome finish housing with holder

RS: One Thousand Six

225 ,clear/opaque glass diffuser complete erected with lead wires with minimum 15 2.00 Each 1696.00

wattage capacity as per instruction engineer incharge/architect/authority .cat-III Hundred Ninty Six only

Providing & erecting stand alone Wall mounted PIR motion Sensor with ABS Housing

single phase AC operation. Complete with Dual element pyroelectric sensor, Digital

Signal Processing Detection Range 12 meters, angle 110 degree, RFI and EMI

immunity, Detects motion in it's coverage area. Multipurpose device can be used as

RS: Four Thousand Nine

226 security device, an energy saving device, an automatic switch. Complete with infra 8.00 Each

Hundred Fifty Eight only

red sensor, Light & sensitivity Sensor, Timer with Bye pass facility. Suitable for

Watts incandescent load or 750 watts of fluorescent load.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of

thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder

coated and high U.V. & corrosion resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

RS: One Hundred

227 Luminaire efficacy> 85 lumens/watt , 20.00 Mtr. 134.00

LED driver efficiency > 85 % Thirty Four only

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

wattage capacity between the ranges shown.)Minimum 4.8W-120 LED per meter (2

wire, IP-65) with non integral suitable Driver complete LED Strip Light

Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to

Class-I, 50 Hz. Specification of Ceiling Fan must be as per below. (1) Sweep:

mm, (2) Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power

Consumption: maximum 53W, (5) RPM: minimum 330, (6) Service value:min

m3/min. (7) Class of insulation: 'B', (8) No. of heavy duty premium quality Ball

bearing: Two, (9) Total Body: Top & Bottom should be alluminium, (10) Blade:

Aluminium approx 1.1 mm thick, (11) Colour: White high grade powder coating, (12)

Canopy: Two Nos. Heavy duty, (13) Condenser: 1.5 MFD Aluminium body premium

RS: One Thousand Nine

quality, Branded make, (14) Down road: up to 1.0 mtr as per site requirment, (15)

228 2.00 Each 1929.00 Hundred Twenty Nine

Required fixing accessories, (16) 3 core 0.50 sq.mm ISI wire as per site requirment, only

(17) No vibration and noise due to mechanical parts. (Agency has to erect safey wire

with ceiling fan and checked with EIC) (OEM has to approved model as per tender

specification and tested at ERDA) (Necessary test reports should be submitted

strictly at the time of approval. Sample approved by EIC subject to above

specification only)

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated,

Ceiling fan with Brush Less Direct Current (BLDC) permanent ferrite magnet Motor,

class of insulation: B, Rust free 3 nos.Aluminium blades, 2 nos. canopies, shackle kit

with earthing provision, copper winding, Power factor not < 0.9, Service Value

(CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM,230v (tolerance

as per IS : 374-2019), THD < 10%, compitible with electronic regulator unit for Speed

Control and all remaining accessories including safety pin, nut bolts, washers,

temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and rectifier RS: Two Thousand Six

229 circuit with surge, over current and overload protection , 50 Hz, Single phase AC 78.00 Each

Hundred Three only

Supply, earthing etc. Complete as required and 3 core 0.50 sq.mm ISI wire as per

site requirment.(Agency has to erect safey wire with ceiling fan and checked with

EIC) (Necessary test reports should be submitted strictly at the time of approval.

Sample approved by EIC subject to above specification only) (A) 1200 mm Sweep

Supplying and erecting approved make oscillating type medium duty bracket fan

with Aluminium Blades A.C. 23OV. 50cy/s wall mounted with height adjustment and RS: Two Thousand

230 rotary tilting device complete with guard, mounting accessories kit, pull cord for 2.00 Each 2329.00 Three Hundred Twenty

speed and oscillation flexible Core plug top complete erected with lead wires as Nine only

directed. (a) 400mm

Supplying & erecting approved make low noise Decorative exhaust fan having size

150mm/ 200 mm with 1350 RPM with round / square frame ABS/metalic body with RS: One Thousand Six

231 Grill / inbuilt lowers. 7.00 Each 1687.00 Hundred Eighty Seven

Supplying & erecting single phase approved make industrial exhaust fan suitable for

medium duty ring mounted low noise operation suitable for medium duty having RS: Two Thousand

232 following dia size and maximum speed in RPM 380 mm dia 900 RPM 6.00 Each 2713.00 Seven Hundred Thirteen

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Supplying & Erecting Fan Hook Of 10 mm M.S Round bar bounded to the RCC bars

up to 50 mm Length each side & piereced through 18 Gauge G.I Box having 125 mm

dia depth of 75 mm complete erected concealed in ceiling with necessary round RS: One Hundred

233 modular plate 80.00 Each

Twenty Five only

Providing & erecting Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S.

RS: Ninty Eight

234 Bolt & Nuts erected with necessary hook of 10 mm M.S. Round Bar. 5.00 Each 98.00

Providing & Erecting Decorative Dig Dong bell Stereo type 250 Volt complete

erected on existing polished wooden block or in M.S. box with 3mm thick white ISI RS: One Hundred

235 mark laminated sheet. (Anchor-Chime model,Rider,Vision,GM modular) 4.00 Each

Seventy only

Supplying and erecting 19 / 20 mm. nominal bore "B" Class G.I Pipe /M.S. Pipe down

rod erected duly painted for fan complete with necessary 24/0.2 flat 3 core flexible

cable with earthing.The Down rod thickness,hole,locking

arrangement,construction,power coating,colour shed should be match as original

down rod brought with ceiling fan.For that agency has to give original down road

RS: One Hundred

236 sample to fabricator and one sample down rod should be approved with EIC .After 10.00 Rn.Mtr 107.00

Seven only

approval given by EIC agency can use the down rod as per approved sample.If

without approval down rod will be erect on site,agency has to replace them with own

cost.(No vibration or wobbling of fan while rotating)

Supplying and fixing radium sticker or Painting the number and words for inventory

Identification on erected fittings / equipment’s or Such accessories (MCBDB, Panel,

Pole, Rack, Earthing, Pump, Door etc.) as may required with good quality of

enamelled paint or fade proof, weather proof, waterproof high quality vinyl radium

sticker for indoor / outdoor application as directed by engineer in charge. For one RS: Twenty Two

character 50 mm height. only

(The colour of sticker / paint should be as per instruction given by EIC as per site

requirement)

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Desiging,fabricating,testing electrical panel (switch board) at manufacuturer's

workshop and Providing & erecting at site. Panel should be weather proof, dust &

vermin proof, floor mounted front operated cubical panel board having IP-54 made

from 2 mm. thick CRCA M.S. sheet for outer body,gland plate & doors, 1.6 mm. thick

CRCA M.S. sheet for internal partitions with necessary supporting angles, flats

including skirting, bending, drilling, welding, riveting with internal partitions &

cable alley,rubber gromets, rib, control wires, backelite control fuses as per

requirements,sufficient nos. of hinges for doors, door locking arrangement, rubber

gasket complete with Required Nos. heavy Duty Connector with Cadmium plated nut RS: Twenty One

238 and bolt for Anti rusting and Al.busbar for earth, nuts/bolts,washer etc as per 4.50 Sq. Mtr. 21500.00 Thousand Five Hundred

instruction of engineer-In-Charge. Cost of supplied item like switchgears, LED only

indicator ,CTs , busbars and PVC FRLS copper wire with suitable size for power

interconnection,measuring instruments, foundation flange-bolts-base plates, cost of

C channel/angle iron stand (1ft to 2ft height as per cable size)shall be excluded of

panel fabrication.Specification of suppiled items is attached seperatly.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

The panel shall be supplied with Seven Tank chemical process. which shall be carried out before

applying painting, painted with powder coating. (The rates excludes the cost of switchgears,

busbars, interconnecting mains & Copper / Aluminium strip, fuse, meters etc. The dimension shall

be measured excluding base beams.switchgear of approved brand and specification shall be

used and erected at CPRI approved panel manufacturers only. Busbar compartment must be

separate for easy termination of tails/cables and to avoid least distance of punching holes in

busbar. Panel depth shall be 350 mm. Panel manufacturer have to give 4 years service support if

in case of breakdown or fault. Panel manufacturer have to submit electrical meter calibration

report. Agency should design the panel in such a way that there should not be any excess in panel

area (sq.mtr) & length of bus-bar (mtr), if any excess is need to be done agnecy has to draw

attention to GSPHCL at the time of approval of G.A. drawing.

Loading and unloading of above item shall be done by hydra and skill work force under

supervision of electrical engineer and guidelines given by manufacturer to avoid damage to the

Size of door and Ele. room / Pump room shall be measure and provide to panel manufacturer to

prepare GA drawing considering the size of electrical room/pump room door and also inside size

of it. Agnecy has to co-ordinate with civil agency for giving proper dimenssion of electrical

room/pump room to accomodeted panel easily.[Including Necessary numbering / marking on

PANEL done with red colour radium sticker as per site requirement and instructions given by EIC

on site. Font / number size given by EIC on site as per requirement] (See attached details

specification of panel & manufacture also while quoting rate. [Manufacturer must be of Gujarat

state so three stage inspection can be done if required and service support]

Providing and erecting in existing fabrication panel Approved make Four pole

moulded case circuit breaker having breaking capacity/strength ICU of 35 K.A. and

above at 415 V. having Normal current rating 125A.with variable Thermal &

RS: Eight Thousand

238 magnetic release suitable to work on A.C.supply 50 c/s. with all internal 2.00 Each 8774.00 Seven Hundred Seventy

connections, spreader tinned copper & complete erected in existing 16 G.M.S. Four only

housing (pump Panel) Ics=100%Icu

Providing and erecting in existing fabrication panel Approved make Four pole

moulded case circuit breaker having breaking capacity/strength ICU of 35 K.A. and

above at 415 V. having Normal current rating 63-100A.with variable Thermal &

RS: Six Thousand Seven

239 magnetic release suitable to work on A.C.supply 50 c/s. with all internal 2.00 Each 6723.00 Hundred Twenty Three

connections, spreader tinned copper & complete erected in existing 16 G.M.S. only

housing (pump Panel) Ics=100%Icu

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Supplying & erecting approved make Four Pole 415V change over switch interior for

panel mounting with operating mechanism A.C.23 duty confirming to IS for [c] 100- RS: Seven Thousand

240 125A 2.00 Each 7713.00 Seven Hundred Thirteen

Supplying & erecting approved make Four Pole 415 V change over switch interior

for panel mounting with operating mechanism A.C.23 duty confirming to I.S.S. for RS: Four Thousand

241 For 63 A. 2.00 Each 4738.00 Seven Hundred Thirty

Eight only

Providing and erecting following additional parts for panel mounting MCCBs

(A)Extended operating rotary handle with pad lock with three position trip,off,on

RS: Nine Hundred Fifty

242 suitable for 25A to 250 A panel mounting cat-III(Company must be same company of 6.00 Each 952.00

switchgear)(If required) Two only

Supplying and erecting tripple pole & neutral 440V / 500 V Panel mounting Copper

Busbars with four equal Nos. of electrolyte bus having current density not more than

1.6 Amp. / sq.mm (Rated current / cross section area) duly wraped with colour

insulating tape for phase sequence of following current carrying capacity, erected

with necessary bus bar supports / insulators, main cable socket to each bar, erected RS: One Thousand Nine

243a 1.00 Rn.Mtr 1942.00

in existing cubical panel with necessary connections.For electrolyte copper Busbars Hundred Forty Two only

Suitable for 100 Amp. capacity

Suitable for 200 Amp. capacity RS: Three Thousand

243b 2.00 Rn.Mtr 3171.00 One Hundred Seventy One

RS: Four Thousand

Suitable for 300 Amp. capacity

243c 2.00 Rn.Mtr 4861.00 Eight Hundred Sixty One

Supplying and erecting KITKAT pattern porcelain cutout with base of following

RS: Four Hundred

244 current capacity erected on existing block board. [vi] 200 A. 500 V. 3.00 Each 416.00

Sixteen only

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Approved make Earth fault Relay suitable to mount with inter connection to moulded

case circuit breaker having CT ratio & MCCB rating as following along with shunt

trip 220 V AC with all internal connections & complete erected in existing RS: Five Thousand Four

245 M.S.housing. (2) 125 A - 200 A, CT Ratio 1/200 [make and model approved by EIC 1.00 Each 5427.00 Hundred Twenty Seven

strictly as per tender specification] only

Supplying and erecting approved make panel mounting type Digital Voltmeter

having 3 x 1/2 digits LED display, 0 to 750 AC Volts range having class-1 accuracy,

erected on existing panel board with all connection, wiring etc. with manufacturers RS: One Thousand Two

246 calibration certificate. [Make and model approved by EIC as per specification] 1.00 Each 1263.00 Hundred Sixty Three

Supplying and erecting approved make panel mounting type Digital Ammeter

having 3 digits LED display, external CT operated, calibrated for 0 to 1000 Amps.

suitable to operate on 500 Volt AC, class-1 accuracy,erected on existing panel RS: One Thousand Five

247 board with all connection, wiring etc. with manufacturers calibration certificate. 1.00 Each 1543.00 Hundred Forty Three

[Make and model approved by EIC as per specification] only

500 V on existing panel board with necessary connections. [Make and model RS: Three Hundred

248 approved by EIC as per specification] 2.00 Each

Fourteen only

Supplying and erecting approved make set of indicator lamps of LED type lamp,

lense cover, Bakelite holder complete erected with necessary connections. [Make RS: Forty Three

249 and model approved by EIC as per specification] 6.00 Each

Providing and Erecting of Miniature circuit breaker single pole 6 Amp. to 25 Amp.

suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be

RS: One Hundred

250 erected in existing MS box confirming to IS 8828/1996 with ISI Mark. Cat - lll 22.00 Each 122.00

Twenty Two only

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio

15 VA burden having 0.5 class accuracy erected in Class existing CRCA box duly

RS: Two Hundred

251 secured with insulating materials connected to the meter [Make and model 3.00 Each 272.00

approved by EIC as per specification] Seventy Two only

Providing & erecting 240 V MCB Double pole switch for Motor and inductive load (C

curve) having 10 KA breaking capacity & confirms to IS:8828 in Existing M.S. box

RS: Three Hundred

252 having following capacity. For 40 Amp. 30.00 Each 360.00

Sixty only

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve)

having 10KA breaking capacity & confirms to IS:8828 in existing MS box having

RS: Eight Hundred

253 following capacity. For 63 Amp. 7.00 Each 803.00

Three only

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve)

having 10KA breaking capacity & confirms to IS :8828 with same company metal box

RS: Seven Hundred

254 with earthing terminal having following capacity in existing MS box having following 2.00 Each 728.00

capacity For 40 Amp. Cat. Twenty Eight only

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve)

having 10KA breaking capacity & confirms to IS :8828 with same company metal box

RS: Six Hundred Forty

255 with earthing terminal having following capacity with necessary numbering/marking 2.00 Each 649.00

with oil paint by painter. For 25 Amp. Cat.-III Nine only

Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet

steel duly powder coated with gasket, dust & vermin proof bakelite shield two

earthing terminals for following type of RCCB, RCCB + MCB [a] For 2 pole [Same RS: Two Hundred Ninty

256a company metal box used as MCB / ELCB used with earthing terminal with necessary 2.00 Each

Nine only

Numbering / marking with oil Paint by painter]

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

For 4 pole [Same company metal box used as MCB / ELCB used with earthing

RS: Four Hundred

256b terminal with necessary Numbering / marking with oil Paint by painter] 1.00 Each 486.00

Eighty Six only

Supply, Installation, Testing & Commissioning of Three Phase, 440 V Surge

Suppressor protection Device (SPD) & 40 Amp TPN MCB (or As per SPD OEM guide

line for the protection of SPD which is erected such a way that it can be operated

easily) SPD must be capable to protect all electrical and electronics equipments if

SPD blast or fuse then the panel builder must have replace it soon during defect RS: Six Thousand Three

liability period.The Detail Specification of SPD are As per Attached sheet with Hundred Ninteen only

Annexture -A(E). (Hakel, Iskira, Obo make) (With Three year Gaurantee / warranty)

Providing ad erecting approved make single phase Double Door metal clad D.B. as per relevant

indian standards ammended upto date.

Supplying and fixing following way single phase MCB distrubution board of company fabricated

MCBDB Door Back Side &body Must Be Made OF 1.2 MM Thick CRCA Sheet sheet with sheet box

with powder coated inside and outside after apply seven tank chemical process of cover

complete with suitable integral single piece construction tinned copper busbar and link with all

necessary interconnection and with necessary size MS frame for mounting MCBDB. Manufacturer

must be provided (1) IP 43 and as per IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2)

Seven tank Powder coating Certificate (3) Tinned Copper/Brass make neutral & Earthing link with

isolation & Protecting Cover for 240 Volts on surface / recess complete with loose wire box,

terminal connectors for all incoming and outgoing circuits, with suitable size FRLS PVC insulated

RS: Six Thousand Two

258 copper conductor up to terminal blocks and internal connection, tinned coppper bus bar, 1 no. 11.00 Each 6254.00

tinned copper neutral link, tinned copper earth bar, din bar, detachable gland plate, Hundred Fifty Four only

interconnections, powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing. For 16 Way MCBDB: Including

Amp. 30 mA double pole ELCB (ELCB confirming to IS:12640/1988 having sensitivity of 30 mA and

breaking capacity of 10 KA), MCB 40 Amp. double pole switch (C curve confirms to IS:8828 having

breaking capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL suitable to operate on

Volt A.C. power. (6 Amp to 25 Amp: 12 Nos. as Per Site Required As Per EIC Instruction)

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must

be erected in line & level with spirit level and finish the external edge with box

cutting plaster) (Same colour MCB(SP/DP) should be used as same as MCBDB)

[Including Necessary numbering / marking on box done with red colour radium

sticker as per site requirement and instructions given by EIC on site. Font / number

size given by EIC on site as per requirement]

Providing ad erecting approved make single phase Double Door metal clad D.B. as

per relevant indian standards ammended upto date.

Supplying and fixing following way single phase MCB distrubution board of

company fabricated MCBDB Door Back Side &body Must Be Made OF 1.2 MM Thick

CRCA Sheet sheet box with powder coated inside and outside after apply seven

tank chemical process ofcover complete with suitable integral single piece

construction tinned copper busbar and link with all necessary interconnection and

with necessary size MS frame for mounting MCBDB. Manufacturer must be provided

(1) IP 43 and as per IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2)

Seven tank Powder coating Certificate (3) Tinned Copper/Brass make neutral & RS: Five Thousand Five

259 1.00 Each 5543.00 Hundred Forty Three

Earthing link with isolation & Protecting Cover for 240 Volts on surface / recess only

complete with loose wire box, terminal connectors for all incoming and outgoing

circuits, with suitable size FRLS PVC insulated copper conductor up to terminal

blocks and internal connection, tinned coppper bus bar, 1 no. tinned copper neutral

link, tinned copper earth bar, din bar, detachable gland plate, interconnections,

powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

For 12 Way MCBDB: Including 40 Amp. 30 mA double pole ELCB (ELCB confirming

to IS:12640/1988 having sensitivity of 30 mA and breaking capacity of 10 KA), MCB

40 Amp. double pole switch (C curve confirms to IS:8828 having breaking capacity

of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL suitable to operate on 240 Volt

A.C. power. (6 Amp to 25A 8 Nos. As Per Site Requirment As PEr EIC Instruction)

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must

be erected in line & level with spirit level and finish the external edge with box

cutting plaster) (Same colour MCB(SP/DP) should be used as same as MCBDB)

[Including Necessary numbering / marking on box done with red colour radium

sticker as per site requirement and instructions given by EIC on site. Font / number

size given by EIC on site as per requirement]

Providing ad erecting approved make Three phase Double Door metal clad D.B. as

per relevant indian standards ammended upto date.

Supplying and fixing following way Three phase MCB distrubution board of

company fabricated 16 GMS/IK 09 certificate with sheet box with powder coated

inside and outside after apply seven tank chemical process of MS sheet cover

complete with suitable integral single piece construction tinned copper busbar and

link with all necessary interconnection and with necessary size MS frame for

mounting MCBDB. Manufacturer must be provided (1) IP 43 and as per IS:8623-1 &

IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank Powder coating Certificate

(3) Tinned Copper/Brass make neutral & Earthing link with isolation & Protecting RS: Three Thousand

260 2.00 Each 3379.00 Three Hundred Seventy

Cover for 240 Volts on surface / recess complete with loose wire box, terminal Nine only

connectors for all incoming and outgoing circuits, with suitable size FRLS PVC

insulated copper conductor up to terminal blocks and internal connection, tinned

coppper bus bar, 1 no. tinned copper neutral link, tinned copper earth bar, din bar,

detachable gland plate, interconnections, powder painted including earthing etc.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

(n) Three phase 8 way SS Double door for horizontal single phase outgoing Cat.-III

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must

be erected in line & level with spirit level and finish the external edge with box

cutting plaster) (Same colour MCB(SP/DP) should be used as same as MCBDB)

[Including Necessary numbering / marking on box done with red colour radium

sticker as per site requirement and instructions given by EIC on site. Font / number

size given by EIC on site as per requirement]

Providing and Erecting of Approved make ELCBs / RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on 3 phase and neutral 240 V having characteristic of quick

action & tripping with all advance feature & do not incorporate any electronic RS: Two Thousand Four

261 component for following Max. rating erected in Existing metal box with earthing 6.00 Each 2434.00 Hundred Thirty Four

terminal with necessary numbering with oil paint by painter. (iv) 40Amp. DP. only

Providing and Erecting of Approved make ELCBs / RCCBs conforming to IS:

and having sensitivity of 300 mA and Short Circuit withstand capacity of 10KA and

suitable for operation on 3 phase and neutral 240 V having characteristic of quick

action & tripping with all advance feature & do not incorporate any electronic

RS: Three Thousand

component for following Max. rating erected as directed with same company metal

262 1.00 Each 3312.00 Three Hundred Twelve

box with earthing terminal with necessary numbering with oil paint by painter. (iv) only

40 Amp. DP.

Providing and erecting approved make ISI mark ELCB confirming to IS:12640/1988

having serial number printed on it and having sensitivity of 300 mA. and breaking

capacity of 10 KA and suitable for 440 V having characteristic of quick acting &

Tripping with all advance feature & do not incorporate any electronic component for

RS: Four Thousand

263 following Max. rating erected as directed in existing same company MS box. 2.00 Each

Ninty Four only

Suitable for operation on Three phase 440 Volt max. rating of (iii) For 40 Amp. FP.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Providing & erecting 240 V MCB Double pole switch for Lighting load (C curve)

having 10 KA breaking capacity & confirms to IS:8828 in Existing M.S. box having

RS: Three Hundred

264 following capacity. For 6 to 32 Amp. Cat:-III 5.00 Each 327.00

Twenty Seven only

Supplying & erecting 12 mm thick backelite sheet of approved make and grade on

25 x 25 x 3 mm red oxide painted angle iron frame suitable for fixing ICDP SWITCH

and energy meter (contractor shall make approved drawing of Bakelite sheet To

RS: Two Thousand Two

265 arrange required No. of Energy meter & ICDP switch-busbar etc. as per Actual 1.00 Sq. Mtr. 2289.00 Hundred Eighty Nine

space available in electrical room at site) only

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Supplying and erecting Servo Controlled Voltage Stabilizer (SCVS) as per following

requirement: (1) Input Voltage Range - Three Phase 340 To 480 Volt AC. (2) Out put

Volatge - Three Phase 415 Volt AC (Line - Line) with Voltage Regulation of +/- 1%.

(3) Frequency range - 47 Hz To 63 Hz. (4) Efficiency - More or equal to 98%. (5) Type

of Stabilizer - Suitable for Balance & Unbalance Load and Voltage including SPD (6)

Controlled Type - Digital Micro Controller Based Disply. (7) Rate Of Correction -

Upto 100 Volt / Sec (Line - Line) (8) Servo Motor Drive - AC Syncronous Stepper

Motor - As per KVA Capacityy, Out put volatge and Voltage regulation requirement.

(9) Nil Wave form Distortion and Effect of Load POwer. (10) Responce Time - 10 milli

second. (11) Protection requirements - Input low Cut off protection / Input High Cut

Off Protection / Output Low Cut Off protection / IOutput High (12) Fault

Annuciation Panel LED shows Input present, Input high Input low, Output Normal, RS: Ninty One Thousand

266 Output High, Outpur low, Overload. (13) Output On time delay - 10 seconds (14) 1.00 Each 91138.00 One Hundred Thirty Eight

Ambient Tempeature capacity - 0 - 45 RH upto 90 %. (15) Enclosure Type - IP 20 (16) only

Type of Cooling - Air ,Output:Bypass switch with changeover switch and Provied

SPD & 4 year free replacement guarantee on Stamp paper.

Loading and unloading of above item shall be done by hydra and skill work force

under supervision of electrical engineer and guidelines given by manufacturer to

avoid damage to the item. Picture of it to be submitted in running bill / final bill.Size

of door and Ele. room / Pump room shall be checked by agency's engineer before

giving order. If found any problem in size discuss with GSPHCL engineer for

rectification before giving order. (35 KVA) (Make - Servomax, Fuji, Krykard,

Providing, erecting, fabricating the M.S. structure as per requirement of site as per

structure design Including proper size approved by EIC of M.S. angles, flats, bars,

square pipe, channels, sections (Tata, Jindal, Asian, JSI Make) complete with cutting,

welding, grinding and finishing duly painted with Asian/Nerolac make premium

quality oil paint and true care red oxide metal primer,asian paint make with erection

on site as per direction of engineer in charge with necessary grouting cementing, RS: Seventy Two and

plastering and finishing complete. All hole opening of square pipe end must be 100.00 Kg.

Paise Sixty Three only

closed with M.S plate welding. Payment will be done on KG as per Actual weight.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Providing and erecting metalic danger notice board for MEDIUM VOLTAGE

268 installation to be erected as per I.S. 3.00 Each 69.00 RS: Sixty Nine only

Supplying and erecting approved make GRP/FRP Perforated type Cable Tray

Material – Corrosion Resistant Polyester Flame Retardant U.V. Stabilized Resin

System - Manufactured from Pultruded Sections- Polyester Resin System, Glass

Content : 55 – 60 % - - Standard Length : 3000 mm- Support Span – 1500 mm,

Deflection L/200 - Specification NEMA FG1 1993- UV Resistant - Flame Retardant – IS

6746 - Appendix K/UL 94, Very Low Flammability - Specification Followed NEMA

FG1 1993 Oxygen Index – Minimum 30% as per ASTM D 2863 - Flame Spread (Extent

of Burning) – 20 mm as per Standard ASTM D 635 - Tensile Strength – 4000 – 8000 RS: Five Hundred

269a Kg/Cm2 as per Standard ASTM D 638 - Flexural Strength – 2500 – 10000 Kg/Cm2 as 5.00 Rn. Mtr.

Twenty Six only

per Standard ASTM D 790- Izod Impact Strength – 130 Kg/Cm2 as per Standard ASTM

D 256- Compressive Strength – 2500 – 5000 Kg/Cm2 as per Standard ASTM D 695-

Barcol Hardness – 50 – 65. Width 300 mm, Side Member “C” Section : 100 x 35 x

35mm with 4mm Thickness, Loading 60Kg./Mtr. With Concentrated Load 70Kg. at

center of the span

Width 150 mm, Side Member “C” Section : 75 x 25 x 25mm with 4mm Thickness,

Loading 30Kg./Mtr. With Concentrated Load 70Kg. at center of the span. RS: Two Hundred

269b 5.00 Rn. Mtr.

Thirty only

Supplying and laying UPVC cable trunking system comprising unplasticised

polyvinyl, chloride rigid material with ignition free & flame proof confirming BS .All

RS: Two Hundred

270a necessary accessories and measuring of following sizes. [1] 75 mm x 50 mm 10.00 Mtr. 275.00

trunking.[MK, LEGRAND, OBBO make Only] Seventy Five only

100 mm x 50 mm trunking .[MK, LEGRAND, OBBO make Only] RS: Four Hundred

Twenty Four only

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Supplying and erecting approved make Octagonal pole made from HR sheet steel.

The pole should be made as per IS. and shall be coated with hot dip galvanizing as

per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction box

with Hot Deep Galvanised door having 2 nos. 180° operated hinges & 2 nos. Ln key

locking with silicon rubber gasket. Consist of terminal plate of min 6mm Hylam

sheet, standard profile 35 mm X 7.5 mm Din-Rail & MCB, Brass stud type terminal RS: Seven Thousand Six

and arrangement for cable termination to be erected on RCC foundation as per 3.00 Each

Hundred Nine only

details given by manufacturer and EIC considering site requirement.

5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness with 200 mm X

mm X 12 mm base plate, 4-M16 Bolts and 600 mm long hot deep galvanized J-Bolt,

nuts, washers..Approx Pole weight 46 kg(make:-Bajaj,Walmark,Transrail,Ambica

(Test certificate to be submitted)SITC Of 5 To 7 Mtr Octagonal Pole Foundation (1)

Grade of RCC 1:2:4, (2) Grade of steel rainforcement of RCC FE 415, (3) Clear cover

to rainforcement 50mm, (4) Concrete vibrated, (5) use suttering / farma(6)

Foundation Colour Same As Building Colour outside Shade (7) Detail drawing will be

given by corporation .

For 7 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm thickness with 225 mm X

225 mm X 16 mm base plate, 4-M20 Bolts and 600 mm long hot deep galvanized J-

Bolt, nuts, washers with. Approx Pole weight 67 kg.(Make:- Bajaj, Valmont, Transrail,

Ambica Only) (Test certificate to be submitted)SITC Of 5 To 7 Mtr Octagonal Pole

RS: Twelve Thousand

Foundation (1) Grade of RCC 1:2:4, (2) Grade of steel rainforcement of RCC FE

271b 3.00 Each 12551.00 Five Hundred Fifty One

(3) Clear cover to rainforcement 50mm, (4) Concrete vibrated, (5) use suttering / only

farma(6) Foundation Colour Same As Building Colour outside Shade (7) Detail

drawing will be given by corporation .

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Providing and making Coil type earthing, coil made from 8 SWG galvanised iron

wire with 50 mm OD and 50 turns (length of turns approx. 200 mm) and having

additional continuous streight length of 3.00 mtr at open end and should be

273 connected to earthing bolt and burried in 1.5 mtr deep specially prepared earth pit

RS: Three Hundred

Sixty Eight only

complete with salt and charcoal/coke as required for coil type earthing.(Approx

weight of coil 1.0 to 1.1 Kgs)

Supplying and erecting Fabricating terminal box for street light pole made from

SWG M.S. sheet having following size complete with fixing arrangement for terminal

board, with necessary hole for wire entry and exit from the box. The box shall be

provided with cover and hinges on one side and bolting at other end The box shall

be fixed by clamps fabricated from 25mm x 6mm flat.The box shall be painted with

RS: Seven Hundred

274 one coat of red oxide and two coats of paint having following box size 330 mm x 260 2.00 Each 702.00

mm x 140 mm (depth). Providing and fixing Terminal board of size 5.0 x 127 x

mm.bakelite sheet with 15 Amp. kitkat pattern porcelain fuse unit with suitable brass

studs with nuts, washers and clamps of size 25 mm x 3 mm suitable for pole painted

with one coat of red lead paint.

Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside

diameter complete with suitable G.I. Sleeve tubing of 2 mm. thick and required size

and length suitable for 76.5 / 80 mm. required size of pole top or pipe in pipe surface

for terrace as per instruction of EIC or wall bracket as per instruction of EIC having

nuts and bolts for fixing the brackets and having spread of Upto 0.50 mtr. length with

suitable rise as per site condition and suitable welded stiffner reducer and nipple

RS: Four Hundred

275a with check nut complete painted with one coat of yellow zinc and two coats of 19.00 Each 487.00

Eighty Seven only

alluminium paint for Single arm bracket suitable for pole or terrace as per design

given by EIC (a) For single arm bracket. (Jindal / Asian / Tata / Surya Prakash make

Only) (Fabricators:- Bajaj, Valmont, Transrail, Ambica, RR Ispat Only) (Test

certificate to be submitted)

For Double arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only)

(Fabricators:- Bajaj, Valmont, Transrail, Ambica Only) (Test certificate to be RS: Six Hundred

275b submitted) 1.00 Each

Sixteen only

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

For Wall & Terrace Street light Bracket:Providing and Fixing of wall and terrace

bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside diameter and length

suitable for building face for fixing the brackets and having spread of Upto 0.70 mtr.

length with suitable degree angle as per site situation suggested by EIC. vertical

plane and suitable welded stiffner reducer and nipple with check nut complete

painted with one coat of red oxide and two coats of alluminium paint (Zinc Coating

before alluminium Paint is mandatory)with . complete with 150*150*2mm thick G.I

plate with 4no heavy duty galvanized jasti khila of required size or Single arm RS: Four Hundred

276 bracket (pipe in pipe type) suitable for terrace as per design given by EIC 1.00 Each

Eighty Seven only

Considering parfait, height ,width and total height of building and type of led fitting

For single arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only)

(Fabricators:- Ambica / Fab / Bajaj / Impression equipment Only) (Test certificate to

be submitted)

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

SITC of Outdoor aesthetically designed LED Street Light Luminaire with total

consumption of max. 55 Watts with single piece heavy duty & sufficient size of die

cast aluminium housing to accommodate driver, both SPD and necessary wiring and

terminal easily inside the housing. High power LEDs wattage of 5 Watt (Driving

current of LED should be max. 80% of Rated current) shall be mounted on high

quality metal core PCB with extremely precison designed heat sink complete with

IP66 protection. LED lense are covered with thoughened glass / premium cluster

Lens for better light distribution. The fixture should be suitable for pole/bracket

mounting. The fixture should be complied with both LM79 and LM 80 certified. LED

module should be tested L70 at 50,000 hrs ( All Test Certificate must be submitted

with RA bill). LED fitting provided with high quality potted driver with Metal housing

and protection against high and low Voltage cut Off, Protection against 440V. Driver RS: Four Thousand Four

277 should have protection like over current, over voltage, short circuit and operational 2.00 Each

Hundred Six only

in the temperature range of 0 deg to 50 deg and humidity range of 10% to 90% RH.

THD of driver should be less than 10% and P.F > 0.95. The Fixture should meet the

technical criterias like Operating Voltage range 180 to 270 V, total lumens of fitting

not less than 7500, CCT> 4K/6K as per site requirement & decided by EIC, CRI >

beam angle 120 deg, surge immunity level at least 4 KV integral and 10 KV non

integral. (Note:- The manufacturer / authorized Channel partner of the manufacturer

has to submit 5 yrs free replacement Guarantee for complete Fixture)

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

SITC of Outdoor aesthetically designed LED Street Light Luminaire with total

consumption of max. 75 Watts with single piece heavy duty & sufficient size of die

cast aluminium housing to accommodate driver, both SPD and necessary wiring and

terminal easily inside the housing. High power LEDs wattage of 5 Watt (Driving

current of LED should be max. 80% of Rated current ) shall be mounted on high

quality metal core PCB with extremely precison designed heat sink complete with

IP66 protection. LED lense are covered with thoughened glass / premium cluster

Lens for better light distribution.The fixture should be suitable for pole/bracket

mounting. The fixture should be complied with both LM79 and LM 80 certified.LED

module should be tested L70 at 50,000 hrs ( All Test Certificate must be submitted

with RA bill) . LED fitting provided with high quality potted driver with Metal housing

and protection against high and low Voltage cut Off, Protection against 440V. Driver RS: Five Thousand Two

278 should have protection like over current, over voltage, short circuit and operational 6.00 Each 5229.00 Hundred Twenty Nine

in the temperature range of 0 deg to 50 deg and humidity range of 10% to 90% RH.

THD of driver should be less than 10% and P.F > 0.95. The Fixture should meet the

technical criterias like Oprating Voltage range 180 to 270 V, total lumens of fitting

not less then 11250, CCT> 4K/6K as per site requirement & decided by EIC, CRI >

65, beam angle 120 deg, surge immunity level at least 4 KV integral and 10 KV non

integral. (Note:- The manufacturer / authorized Channel partner of the manufacturer

has to submit 5 yrs free replcement Guarantee for complete Fixture) (Provision in

Estimate For Garden)

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

SITC of Outdoor aesthetically designed LED Flood Light Luminaire with total

consumption of Max.75 watts with single piece heavy duty & sufficient size of die

cast aluminium housing to accommodate driver, both SPD and necessary wiring and

terminal easily inside the housing. High power LEDs of 5 Watt (Driving current of

LED should be max. 80% of Rated current ) shall be mounted on high quality metal

core based PCB with extremely precised designed heat sink, complete with IP66

protection. LED lense are covered with toughened glass / premium cluster Lens for

better light distribution. The fixture should be suitable for pole/bracket mounting.

The fixture should be complied both LM79 and LM 80 certified. LED module should

be tested L70 at 50,000 hrs ( All Test Certificate must be submitted with RA bill). LED

fitting provided with high quality potted driver with Metal housing and protection RS: Five Thousand

279 against high and low Voltage cut Off, Protection against 440V. Driver should have 5.00 Each 5324.00 Three Hundred Twenty

protection like over current, over voltage, short circuit and operational in the Four only

temperature range of 0 deg to 50 deg and humidity range of 10% to 90% RH. THD of

driver should be less than 10% and P.F > 0.95. The Fixture should meet the technical

criterias like Operating Voltage range 180 to 270 V, total lumens of fitting not less

then 11250, CCT > 4K/6K as per site requirement & decided by EIC, CRI > 65, beam

angle 120 deg, surge immunity level at least 4 KV integral and 10 KV non integral.

(Note:- The manufacturer / authorized Channel partner of the manufacturer has to

submit 5 yrs free replacement Guarantee for complete Fixture)

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

SITC of Outdoor aesthetically designed LED Flood Light Luminaire with total

consumption of Max.105 watts with single piece heavy duty & sufficient size of die

cast aluminium housing to accommodate driver, both SPD and necessary wiring and

terminal easily inside the housing. High power LEDs of 5 Watt (Driving current of

LED should be max. 80% of Rated current ) shall be mounted on high quality metal

core based PCB with extremely precised designed heat sink, complete with IP66

protection. LED lense are covered with toughened glass / premium cluster Lens for

better light distribution. The fixture should be suitable for pole/bracket mounting.

The fixture should be complied both LM79 and LM 80 certified. LED module should

be tested L70 at 50,000 hrs( All Test Certificate must be submitted with RA bill). LED

fitting provided with high quality potted driver with Metal housing and protection

RS: Six Thousand Three

280 against high and low Voltage cut Off, Protection against 440V. Driver should have 2.00 Each 6316.00

Hundred Sixteen only

protection like over current, over voltage, short circuit and operational in the

temperature range of 0 deg to 50 deg and humidity range of 10% to 90% RH. THD of

driver should be less than 10% and P.F > 0.95. The Fixture should meet the technical

criterias like Operating Voltage range 180 to 270 V, total lumens of fitting not less

then 15750, CCT > 4K/6K as per site requirement & decided by EIC, CRI > 65, beam

angle 120 deg, surge immunity level at least 4 KV integral and 10 KV non integral.

(Note:- The manufacturer / authorized Channel partner of the manufacturer has to

submit 5 yrs free replacement Guarantee for complete Fixture)

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

supplying & erecting 30 W LED POST TOP LATTERN fitting with high power white

LEDs wattage of 1 ww and above assebled on single MCPCB's effiency more than

130 lumens per watt and corrosion free high pressure diecast alluminium housing

with smooth finish powder caoted and heat sink extruded alluminium with difuser

and poly carbonate optics/ lences with compny mark / name /engraved or

embossed 120 to 300 volt, power factor more than 0.95, THD < 10%, CCT 5000K to

5700K , Uniformity ratio > 0.45, Luminure efficency Min 110 lumens per watt. LED

Driver efficency > 85%. Cree/osram/philips Lumileds/Nichia /Seoul/Bridge Lux RS: Three Thousand

281 (USA) make LED used for luminare ( Each Fitting required LM 79 and LM-80 5.00 Each 3444.00 Four Hundred Forty Four

certificates) (B) Flood Light(IP-65)Surge-10KV.(E)Post Top Latern LED Fitting only

Comprises of 650 MM TOP diameter 120 degree beam angle with 3 Nos supporting

ribs proposed for garden & Promenade. maximum 40 WATT, (Note:- The

manufacturer/authorized Channel partner of the manufacturer has to submit 5 yrs

free replcement Guarantee for complete Fixture)

Supplying & Erecting following size of Light duty “A” Class G.I. Pipe & erecting as

RS: One Hundred

282 directed by Engineer-in-charge. For 25 mm dia. 10.00 Mtr. 171.00

Seventy One only

Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI

283 marked copper wires of following size to be erected as directed. 3 core 1.5 sq.mm. 500.00 Mtr. 58.00 RS: Fifty Eight only

PVC insulated round copper wire ISI mark.

Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI

284 marked copper wires of following size to be erected as directed. 3 core 2.5 sq.mm. 50.00 Mtr. 96.00 RS: Ninty Six only

PVC insulated round copper wire ISI mark.

Providing & erecting FRLS XLPE (IS : 7098) (I)-88 ISI marked armoured Copper cable

for 1100 volt to be laid 90 cms. Under ground or to be laid on wall with suitable G.I.

heavy guage 1.0 mm thick cable clamp or in existing DWC pipe underground or RS: Four Hundred Fifty

285a road crossing or floor of following size of cables. [a-1] For 4 core x 4 sq.mm. 300.00 Mtr.

For 4 core x 6 sq.mm. RS: Six Hundred Thirty

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Providing & erecting FRLS XLPE (IS : 7098) (I)-88 ISI marked armoured Copper

cable for 1100 volt to be laid 90 cms. Under ground or to be laid on wall with suitable

RS: One Hundred Fifty

286 G.I. heavy guage cable 1.0 mm thick clamp or in existing DWC pipe underground 50.00 Mtr. 153.00

or road crossing or floor.For 4 core x 1.5 sq.mm. Three only

Providing and erecting FRLS XLPE (IS:7098) (I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid 90 cms.Under ground or to be laid on

wall with suitable G.I. heavy guage 1.0 mm thick cable clamp or in existing DWC RS: One Hundred

287 pipe underground or road crossing or floor of following size of cables. [d] 4 core x 40.00 Mtr.

Eighty Two only

Providing and erecting FRLS XLPE (IS:7098) (I)-88 ISI armoured cable multistrand

Aluminium conductofor 1.1 KV. Under ground or to be laid on wall with suitable G.I. RS: Four Hundred Fifty

288 heavy guage 1.0 mm thick cable clamp or in existing trench / pipe of following size 100.00 Mtr.

of cables. [A-1] 3*1/2 core x 70 Sq. mm (35 Sq.mm*1/2 core)

Providing and erecting FRLS XLPE (IS:7098) (I)-88 ISI armoured cable multistrand

Aluminium conductofor 1.1 KV. Under ground or to be laid on wall with suitable G.I.

RS: Three Hundred

289 heavy guage 1.0 mm thick cable clamp or in existing trench / pipe of following size 20.00 Mtr. 338.00

of cables. [A-1] 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) Thirty Eight only

Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS:

16205 (part 24) 2018)) with minimum load required of 450N capacity with anti rodent

and ultra violet material properties with necessary connecting accessories of same

material at required depth to be laid 90 cms. under ground for laying of cable

RS: One Hundred

290 below ground / road surface for enclosing cable and back filling the same to make 350.00 Mtr.

Seventeen only

ground as per original. (A) For Outer dia. 50 mm and Inner dia. 38 mm. (Test

Certificate to be Submitted)

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Providing & laying HDPE Double walled corrugated pipes (DWC) of polyethylene

(conforming to IS: 16205 (part 24) 2018) with minimum load required of 450N

capacity with anti rodent and ultra violet material properties with necessary

connecting accessories of same material at required depth to be laid 90 cms. under

RS: One Hundred Fifty

291 ground for laying of cable below ground / road surface for enclosing cable and 20.00 Mtr.

back filling the same to make ground as per original.For Outer dia. 90 mm and Inner

dia. 75 mm. (Test Certificate to be Submitted)

Providing & fixing double compressed heavy duty flange type brass cable gland

RS: Forty Three

292a with rubber ring for P V C insulated armoured cable complete with outgoing tails, 28.00 Each 43.00

insulating tape etc. For following size cables. For 2 to 4 core x 4.0 Sq. mm

For 4 core*16/25 Sq. mm RS: Fifty Seven

292b 10.00 Each

For 3x1/2 core x 35/50 Sq. mm RS: Seventy Five

292c 6.00 Each

For 3*1/2 core*70 Sq. mm (35 Sq. mm*1/2 core) RS: One Hundred Two

292d 16.00 Each

Providing and Fixing Of Solderiess crimping type Aluminium Lugs conforming to IS

suitable for cable of following size evenly crimping with high pressure tool &

293a connected to switchgear terminals with brass/ cadmium plate nut bolts in an 20.00 Each 15.00 RS: Fifteen only

approved manner. For 16-25 Sq.mm. Allumium Cable

For 35/50 Sq.mm.

293b 20.00 Each 20.00 RS: Twenty only

For 70 Sq.mm. RS: Twenty Five

293c 60.00 Each

Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable

for cable of following size evenly crimped with high pressure tool & connected to

294 switchgear terminals with brass/cadmium plated nut bolts in an approved manner. 179.00 Each 8.00 RS: Eight only

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Providing and Laying of Mains with ISI marked, 1.1 KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated conforms to

IS:694, IEC - 227 erected in existing pipe of following size (Specifically for control

295 panel, relays, power switchgears, motor starters & control wiring) with required size 50.00 Mtr. 70.00 RS: Seventy only

of copper lugs, nuts and bolts if required. [f] One wire 6.00 sq. mm

Providing and Laying of Mains with ISI marked, 1.1 KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated conforms to

IS:694, IEC - 227 erected in existing pipe of following size (Specifically for control RS: One Hundred

296 panel, relays, power switchgears, motor starters & control wiring) with required size 50.00 Mtr.

Fourteen only

of copper lugs, nuts and bolts if required. [f] One wire 10.00 sq. mm

Providing and Laying of Mains with ISI marked, 1.1 KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated conforms to

IS:694, IEC - 227 erected in existing pipe of following size (Specifically for control RS: One Hundred

297 panel, relays, power switchgears, motor starters & control wiring) with required size 125.00 Mtr.

Seventy Six only

of copper lugs, nuts and bolts if required. [g] One wire 16.00 sq. mm

Providing and Laying of Mains with ISI marked, 1.1 KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated conforms to

IS:694, IEC - 227 erected in existing pipe of following size (Specifically for control RS: Two Hundred Ninty

298 panel, relays, power switchgears, motor starters & control wiring) with required size 50.00 Mtr.

Three only

of copper lugs, nuts and bolts if required. For One wire 25 sq.mm.

Providing and Laying of Mains with ISI marked, 1.1 KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control RS: Eight Hundred

299 panel, relays, power switchgears, motor starters & control wiring) with required size 70.00 Mtr.

Twenty Nine only

of copper lugs, nuts and bolts if required. [k] One wire 70.00 sq. mm

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Providing and laying Mains with ISI marked, 1.1 KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC insulated conforms to IS:694, IEC

- 227 erected in existing pipe of following size (Specifically for control panel, relays, RS: Twenty One

300 power switchgears, motor starters & control wiring) with required size of copper 50.00 Mtr.

lugs, nuts and bolts if required. For One wire 1.50 sq. mm

Providing , erecting Universal Astro Intelligent streetlight control system Insu with

weather Proof box for Indoor application 5 KVA (As Per Atteched Technical RS: Eighteen Thousand

301 Specification) 1.00 Each

Four Hundred Six only

Supplying and erecting Fully Automatic hydro pneumatic booster system with cast

iron housing Enclosure class IP44 minimum , with built in PTO motor protection and

stainless steel impeller pump, pump model GRUNDFOS CMB 5-46 series or

equivalent with 24 Liter hydro pneumatic pressurized tank capacity 8 m3/hr,Rated

RS: Fifty Eight Thousand

head :40 mtr, motor rating : 1.5 H.P. includes pressure switches, Non Return Valve,

302 2.00 Each 58357.00 Three Hundred Fifty Seven

Pressure Gauge, 5 way Brass connector, with necessary Plumbing work of 25mm dia only

suction and delivery pipe which includes all required size of pipes, Joints valves,

Bypass valve, labor all accessories required for installation of pressure pump (

Foundation work and base stand cost included)

Supplying Water tight M.S.Box of size 20 x 15 x 15 cms. to erect suitable kitkat fuse /

MCB to be . erected on polished wooden board inside the box with hinged/sliding

RS: Two Hundred

303 door with rubber rings and erected on pole with suitable pole clamp, all duly 2.00 Each 232.00

painted with one coat of red oxide and two coats of paints. (Cost of Fuse / MCB shall Thirty Two only

be taken extra)

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible

Submersible copper cable approved make of following Size. [d] 3 Core x 2.5Sq. Mm RS: One Hundred

Three only

Providing water proof straight joint in PVC insulated flat flexible copper cable by

using insulated material water proofing material and making the joint complete. UP RS: One Hundred

305 to 10 Sq.mm 2.00 Each

Eighty Eight only

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Supply, Installation, Testing and Commissioning (SITC) of ___30____KVA Silent Type

Diesel Generating (DG) Set(s) of prime power rating (kVA) as specified, complete as

a packaged system, conforming to CPCB IV+ (or better) emission norms, and

complying with all applicable statutory requirements, codes and standards including

(but not limited to) IS 4722:1968, IS 13364 (Part 2) and BS 5514 (latest

editions/amendments). The DG set shall be suitable for 415 V ±10%, 50 Hz ±5%, 3-

phase, 4-wire operation at 0.8 lagging power factor, 1500 RPM, for tropical

conditions, and shall be capable of delivering 10% overload for one (1) hour after RS: Five lac Fifty

306 twelve (12) hours of continuous operation (ISO 8528), unless otherwise stated by the 1.00 Each 550138.00 Thousand One Hundred

OEM. The scope shall include complete accessories, interconnections, anti-vibration Thirty Eight only

arrangements, exhaust system, acoustic enclosure, consumables for first

commissioning, and all works necessary to render the installation fully functional

and compliant, as directed by the Engineer-in-Charge (EIC).

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

(A) Diesel Engine:

Turbocharged, 4-stroke, water-cooled, multi-cylinder diesel engine, suitably rated

for the specified DG set prime rating at site conditions, complete with dynamically

balanced flywheel, heavy-duty engine mounting, and electric starting arrangement.

The engine governing shall be electronic (isochronous/droop as per OEM standard)

and shall comply with ISO 8528/BS 5514 requirements for steady-state speed

regulation. Engine shall be complete with dry type air cleaner with restriction

indicator, lube oil cooler (if required), radiator/cooling package (as applicable), and

all sensors/switches required for protections and annunciation. The engine shall be

capable of 10% overload for one (1) hour after twelve (12) hours continuous

operation and shall be suitable for continuous duty under tropical ambient

conditions. The offered engine model shall be CPCB IV+ compliant and shall be

supplied with complete emission control/after-treatment system (including

DEF/urea dosing where applicable) along with all accessories, tanks, pumps,

heaters and controls required for compliant operation. The supply shall include first

fill of lubricating oil, coolant and consumables required for initial commissioning and

testing. All fasteners, couplings, guards, hoses and standard/recommended

accessories required for safe and reliable operation shall be included and shall be

subject to inspection/approval by the EIC.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

(B) Engine-Mounted Instrumentation/Control Panel:

Engine-mounted instrument/control panel shall be microprocessor based, with

LCD/LED display, event log and alarm/trip annunciation, complete with all wiring,

harnesses and terminations. Indications/protections shall include (minimum) the

following and any additional protections recommended by the OEM: (i) Start/Stop

key switch and/or push buttons with emergency stop; (ii) Output breaker: suitably

rated 4-pole ACB/MCCB/MCB as applicable, with minimum 50 kA rupturing

capacity (or as per fault level at site, whichever is higher), with shunt trip where

required; (iii) Jacket water/coolant temperature – indication and high temperature

alarm/trip; (iv) Lube oil pressure – indication and low pressure alarm/trip; (v) Lube

oil temperature (where provided) – indication/alarm; (vi) Battery charging

indication, battery voltage indication and charging failure alarm; (vii) Engine speed

(RPM) indication and overspeed trip; (viii) Engine running hours meter (non-

resettable); (ix) Fuel level indication and low fuel alarm; (x) Fail-to-start / crank fail

alarm; (xi) Under/over frequency and under/over voltage protection (alternator

side) as applicable; (xii) Common alarm and common trip indication with potential-

free contacts for BMS/remote annunciation. All meters/indications shall be of proven

industrial quality and the panel shall be wired, ferruled and labelled. The contractor

shall submit wiring diagrams, protection settings and datasheets for approval prior

to dispatch/installation.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

(C) Alternator:

Synchronous, brushless alternator of appropriate kVA rating, 415 V, 3-phase, 50 Hz,

1500 RPM, 0.8 lagging PF, continuous duty, dynamically balanced rotor, self-cooled,

self-excited and AVR regulated. Enclosure shall be SPDP, minimum IP23. Insulation

shall be Class H with suitable tropicalization; temperature rise shall be within limits

of the applicable standard. The alternator shall comply with IS 13364 (Part 2), IS

and/or BS 2613 (latest), as applicable. Voltage regulation with AVR shall be within

±1.0% (steady state) or OEM standard whichever is better. The alternator shall be

capable of 10% overload for one (1) hour after twelve (12) hours of continuous

operation. Harmonic distortion shall be suitable for non-linear loads; alternator shall

be equipped with appropriate AVR features (e.g., soft start, UFRO) and shall be

suitable for motor starting duties typical to the installation. Terminals shall be

brought out to a terminal box with adequate space for termination and shall include

earthing terminals. All routine/type test certificates (as applicable) shall be

submitted for acceptance.

(D) Base Frame & Foundation: Engine and alternator shall be mounted on a suitably designed, fabricated MS

channel base frame with stiffeners, lifting arrangement and coupling guard, duly painted/treated for

corrosion protection. The set shall be installed on an adequately designed cement concrete

foundation/pedestal with anchor bolts, pockets, grouting and anti-vibration mounts (AVMs) / spring

isolators as per OEM recommendations and site conditions. Vibration levels shall be within OEM

permissible limits. The contractor shall be responsible for alignment, levelling, tightening torque and re-

check after load trial, complete in all respects.

(E) Fuel Tank: In-built/base fuel tank fabricated from minimum 3 mm thick MS sheet, duly leak-tested,

complete with filling arrangement, vent, drain, cleaning opening, level indication and isolation valve(s). The

capacity shall be adequate for minimum eight (8) hours continuous operation at full load. Fuel piping

between tank and engine shall be MS ‘C’ class pipes of suitable diameter with compatible flexible

connections (where required), complete with all valves, clamps, supports, unions and fittings. Any

additional safety provisions required by local fire authority/UGVCL/competent authority (such as double

wall/bunding, flame arrestor, etc.) shall be provided within the quoted scope.

(F) Exhaust System: Heavy-duty residential type exhaust silencer suitable for CPCB IV+ installation (with

DEF/after-treatment system wherever applicable) along with exhaust piping of required length, bends,

supports and flexible bellow, complete with rain cap, drain arrangement and all accessories. Exhaust piping

shall be thermally insulated/lagged and cladded where required to ensure personnel safety and to limit

heat radiation inside the DG room/enclosure. The complete exhaust arrangement shall be designed such

that engine exhaust back pressure remains within OEM permissible limits and shall comply with applicable

statutory and safety requirements.

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

(G) Starting System:

12 V / 24 V DC electric starting system (as per OEM design) comprising starter motor(s), battery

charger/alternator charging arrangement, relays, cabling and terminals, complete with

maintenance-free batteries of suitable Ah capacity to ensure minimum three (3) consecutive

cranking attempts. System shall include battery isolator and indication of charging

healthy/failure. All battery interconnections shall be with crimped lugs, insulated sleeves and

proper supports, complete in all respects.

(H) Acoustic and Weatherproof Enclosure: Acoustic enclosure shall be factory-fabricated,

weatherproof and corrosion protected, suitable for outdoor installation, with minimum IP65

protection (or better) for the enclosure body. Enclosure design shall provide adequate fresh air

intake and hot air discharge for engine radiator and alternator cooling such that the internal

temperature rise remains within OEM limits at full load. Provision shall be made for safe

access/maintenance including lockable doors, viewing window (where provided), emergency

stop access, and cable entry glands. Noise level of the complete DG set with enclosure shall not

exceed 75 dB(A) measured at 1.0 m distance in free field conditions, in accordance with

applicable CPCB requirements. The enclosure shall comply with CPCB IV+ (or better)

requirements and other applicable local rules/regulations. All louvers, acoustic infill/insulation,

fasteners and sealing arrangements shall be of fire-retardant/industrial grade as per OEM

standard. Any deviation from the specified noise/IP requirements shall be treated as non-

compliance unless explicitly approved by the EIC in writing.

The DG set shall be provided with a durable QR code/label fixed on the

enclosure/control panel, linking to a document repository containing (as a

minimum) approved GA drawings, wiring diagrams, foundation and installation

details, OEM catalogues, operating & maintenance manuals, factory test reports,

type test certificates (where applicable), warranty certificate, geo-tag of

manufacturing location, and rating plate data as per relevant IS/BS/ISO

requirements. The OEM/Contractor shall provide a Remote Monitoring System

(RMS) with minimum one (1) year connectivity (SIM/data plan/server access as

applicable), including dashboard access, user ID/password, and data download

facility. RMS shall, at minimum, capture and report: DG status (Auto/Manual/Off),

start/stop events, kW/kVA/kVAR, V/I/Hz, PF, run hours, fuel level, battery voltage,

alarms/trips with time stamp, and GPS/location (where supported). All

licences/subscriptions required for the stated period shall be included in the quoted

Item Estimated Rate [Rs. Ps.] Amount

Description of Item Qty. Unit

No. InFigure In Words Rs.

Erection, testing, commissioning and satisfactory performance demonstration shall be carried out

as per site requirements and as directed by the Engineer-in-Charge. The scope shall include pre-

commissioning checks, insulation resistance tests, no-load and load trials, safety/protection

checks, and performance test on load bank (where directed) with submission of test records at

OEM premises. The contractor shall provide initial consumables including first fill of diesel fuel (

80% of fuel tank capacity at the time handing over ), lubricating oil, coolant, etc. required for

commissioning and the specified tests. The bidder/OEM shall provide comprehensive

warranty/guarantee including repair/ rectify/ replacementof any spare parts, engine, alternator,

control panel, RMS, replacement of battery, enclosure and all accessories( excluding consumable

item like oil, fiter etc.). The period of guarantee shall be consided upto defect liability period

complation or releace of final security deposit which ever is later. The warranty/guarantee shall

be start from the date of NOC or handing over whicg ever is later. covering defects in materials

and workmanship. During warranty, all spares/repairs/replacements and visits required to

maintain the DG set in serviceable condition shall be carried out at no additional cost.including

All necessary statutory approvals, inspections, testing and certification from the Electrical

Inspector/competent authority (including Supply , testing and sealing of energy meter(s) & CT &

meter box wherever applicable) shall be arranged and obtained by the contractor within the

quoted scope and time, at no extra cost. Required O&M manuals, as-built drawings, warranty

certificates and training to operating staff shall be provided prior to handing over.

Factory testing shall be carried out with fuel and load bank at 0.8 power factor and

the DG set shall be offered for inspection prior to dispatch. Cost inclusive of Diesel,

To & Fro Fair, Lodging boarding etc. of two engineer of corporation.

Note: The DG set specifications shall comply with the latest CPCB

guidelines/notifications and all applicable local rules/regulations prevailing as on

the last date of tender submission applicable local rules/regulations prevailing as on

the last date of tender submission(A) Agency has to provide DG set______30_______

KVA ,BHP not less than _____42____ BHP with diesel of 80% of fuel tank capacity

Heavy Duty standard oil M.S./ PVC Barrel & Diesel Filling hand Pump of required