Resurfacing work of Approach Road to NCC Academy, Black topping of Ground and Paver block, Kerbing Repairing around Ground in NCC Academy at Jeetnagar, Dist.Narmada

Name of Work : Resurfacing work of Approach Road to NCC Academy, Black topping of

Ground and Paver block, Kerbing Repairing around Ground in NCC Academy at Jeetnagar, Dist.

BILL OF QUANTITIES

Item Description of Item (with brief specification and reference to book of

Quantity Unit Rate Amount

No. specifications)

1 Scarifying gravelled macadam or bitumen macadam surface 6 cm to

cm.depth including stacking useful materials on road side and disposing 7783.00 Sqm 42.59

off remaining stuff.

2 Providing and applying evenly tack coat with bitumen @ rate of 2.5 Kg/

10 Sq.M. as per instructed E.I.C.

3 Providing and laying 37.50 mm thick Bituminous Macadam with B.T.

aggregate as per M.O.R.T. & H. specification and Bulk asphalt VG-30 for

mixing @ 34.00 KG. / M.T. i.e. 3.40 % of total weight of mix including

heating and mixing the aggregate and asphalt in continuous of drum

mix plant and hot laid process spreading the same by paver finisher and

consolidation with roller as per M.O.R.T. & H specification to achieve

desired density, including providing all materials equipments, tools and

plants, fire wood, oil, kerosene, labour charges etc. complete using

contractor's own machinery drum mix plant and paver finisher etc.

4 Providing and laying 25 mm thick Semi Dense Bituminous Concrete

with B.T. aggregate as per MORTH gradation asphalt grade VG-30 for

mixing @ 50.00 KG. / M.T. i.e. 5.0% by weight of total mix using silane

at the rate 0.1% of asphalt weight including heating and mixing the

aggregate and asphalt by continuous of batch mix plant and hot laid

process laying with paver finisher and consolidation with roller as per

MORTH specification to achieve desire density, including cost all

materials equipments, tools and plants, oil, kerosene, firewood, labour

charges etc. complete using contractor's own machineries batch mix

plant and paver finisher etc. complete.

5 Providing and laying compacted 100mm thick of specified quarry spaull

in side shoulder including carriage of material and spreading on

prepared base including compacting as per MORTH specification etc. 123.00 Cum 343.40

complete as directed. Using excavated material after proper gradation.

6 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete.

7 Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M250 grade

concret as per approved design and including excavation for fixing in 274.00 Rmt 374.92

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand)

8 Dismentaling tiled of stone floors laid in mortar including stacking of

serviceable materilas and disposal of unserviceable materials with all 630.20 Sqm 50.28

9 Cautionary Warning Sign :-Providing and fixing sing boards made out of

2mm aluminium sheet; size 90 x 90 x 90 cms. equilateral triangle as per

design of IRC-67-1977. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats of best

quality epoxy paint ;reflectorised with retro refiectivesheeting as per

latest M.O.S.T.Specifications; 3.1m long stand postand frame fabricated

from suitable sizeiron angle of 35 x 35 x 3mm, 75 x 75 x 6mm as 8.00 No. 3808.66

required; painted with bestquality epoxy coatings in black andwhite

bends. The details of symbol foreach board shall be as per

theinstruction of engineer in charge. The fixing at site shall be in 1:2:4

CC block of size 45 x 45 x 60 Cms. for each leg.including excavation,

curing etc.complete under the supervision of engineer in charge.(A)

Engineer Grade(VR)

10 Informatory Signs :-Providing and fixing sing boards made out of 2mm

aluminium sheet; size 80 x 60cms. rectangle as per the design of IRC-67-

1977 pre treated with phospheting process & acid teching; coated with

one coat of epoxyprimer and two coats of best qualityepoxy paint;

reflectorised with retro refiective sheeting as per latest M.O.S.T.

Specifications; 3.1m long stand postand frame fabricated from suitable

sizeiron angle of 35 x 35 x 3mm75x75x6mm as required; painted with 3.00 No. 3856.90

best qualityepoxy coatings in black and whitebends. the details of

symbol for eachboard shall details of symbol for eachboard shall be as

per the instruction ofengineer in charge. The fixing at site shall be in

1:2:4 CC block of size 45 x45 x 60cms. for each leg. including excavation

curing tec. complete under the supervision of engineer in charge.(A)

Engineer Grade(VR)...

11 Regulatory/Mandatory signs :Providing and fixing sing boards made out

of 2mm aluminium sheet; size 60cms. diameter circle as per the design

of IRC-67-1977 pre treated with phospheting process & acid eteching;

coated with one coat of epoxy primer and two coats of best quality

epoxy paint; reflectorised with retro refiective sheeting as per latest

M.O.S.T. Specifications; 3.1m long stand post and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm 75x75x6mm as required;

painted with best quality epoxy coatings in black and white bends. the

details of symbol for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC block of size

x 45 x 60cms. for each leg. including excavation curing etc. complete

under the supervision of engineer in charge.(A) Engineer Grade(VR)...

12 Direction sign (Junction board):-Providing and fixing sing boards made

out of 2mm aluminium sheet; size 244 x 122cms. rectangle as as per

the design of IRC-67-1977 pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats of best

quality epoxy paint; reflectorised with retro refiective sheeting as per

latest M.O.S.T. Specifications; Letters and numerals should be as per

IRC-30-1968, 3.1m long (2 nos) stand post and frame fabricated from

suitable size iron angle of 50 x 50 x 5mm 75x75x6mm as required;

painted with best quality epoxy coatings in black and white bends. the

details of symbol or inscription / numerals for each board shall be as

per the instruction of engineer in charge. The fixing at site shall be in

1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including

excavation curing etc. complete under the supervision of engineer in

charge.(A) Engineer Grade(VR)...

13 Village name/ Bump Ahed sign :-Providing and fixing sing boards made

out of 2mm aluminium sheet; size 90 x 60cms. rectangle as as per the

design of IRC-67-1977 pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats of best

quality epoxy paint; reflectorised with retro refiective sheeting as per

latest M.O.S.T. Specifications; Letters and numerals should be as per

IRC-30-1968, 3.1m long (2 nos) stand post and frame fabricated from 2.00 No. 5045.37

suitable size iron angle of 50 x 50 x 5mm painted with best quality

epoxy coatings in black and white bends. the details of symbol or

inscription / numerals for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC block of size

x 45 x 60cms. for each leg. including excavation curing etc. complete

under the supervision of engineer in charge.(A) Engineer Grade(VR)...

14 Hazard Marker Sign :-Providing and fixing sing boards made out of 2mm

aluminium sheet; size 90 x 30cms. rectangle as as per the

design/drawing attached (IRC) pretreated with phospheting process &

acid etching; coated with one coat of epoxy primer and two coats of

best quality epoxy paint; reflectorised with retro refiective sheeting as

per latest M.O.S.T. Specifications; 3.1m long stand post and frame 2.00 No. 2423.74

fabricated from suitable size iron angle of 35 x 35 x 3mm & 50 x 50 x

5mm painted with best quality epoxy coatings The fixing at site shall be

in 1:2:4 CC block of size 45x45x 60cms. for each leg. including

excavation curing etc. complete under the supervision of engineer in

charge.(A) Engineer Grade(VR)...

15 Chevron sign :-Providing and fixing sign boards made out of 1.5mm

aluminium sheet / 3mm ACP (Aluminum composite Panel); size

60x50cm rectangular plate as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with one coat of

epoxy primer and two coats of best quality epoxy paint ; reflectorised

with High Intensity Prismatic Grade retro refiective sheeting of Type-4

as per ASTM D-4956 and latest M.O.S.T Specifications; 3.6 mtr long

stand post of tron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron angle

35x35x3mm; painted with best quality epoxy coatings in black and 16.00 No. 3711.75

white bends. the details of symbol or inscription / numerals for each

board shall be as per the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC block of size 45 x 45 x 60 Cms. for each leg

including excavation, Intensity Grade curing etc.complete under the

supervision of engineer in charge. A warranty for 7 years for the Retro

reflective sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab for the

product offered shall be submitted by contractor. (B) Class-B Type-4

Retro Reflective sheeting

16 Road marking with hot applied thermoplastic paints with reflectorising

glass beads on bitumin surface providing and laying a hot applied

thermoplastic compound 2.5 mm thick including reflectorising glass

beads @ 250gms per sqm area, thickness of 2.5mm is excluding of

surface applied glass beds as per IRC:35-2015. The finished surface to

be level, uniform and free from streaks and holes. zebra patta /bump

patta lane/center line/ edge line/cut patta. The white color marking 236.00 Smt 367.72

should provide liminance coefficinet on cemend road shalll be min

mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the

service life during the day time. The marking should meet the

performance criteria for night time reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15 of IRC 35-2015. Warranty for

the Retro reflectivity should be two years.

17 Cat Eye / Road Stud / RPM: Supplying of Molded Twin Shanks Raised

Pavement Markers made of polycarbonate and ABS moulded body and

reflective panels with micro prismatic lens capable of providing total

internal reflection of the light entering the lens face and shall support a

load of 13635 kgs. tested in accordance to ASTM D 4280 Type H and

complying to Specifications of Category A of MORTH Circular No

RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and

length shall not exceed 20 mm, 130 mm and 130 mm and with

minimum reflective area of 13 Sqcm on each side and the slope to the 159.00 No. 326.23

base shall be 35 +/- 5 degree. The strength of detachment of the

integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm

and height not less than 30+/- 2 mm) from the body is to be a minimum

value of 500 Kgf. Fixing will be by drilling holes on the road for the

shanks to go inside, without nails and using epoxy resin based adhesive

as per manufacturers recommendation and The color of the marker

should be as per the IRC 35-2015 and as directed by Engineer-in-

Providing and fixing guard stone as per I.R.C. type design including

white washing etc. complete.(ii) Fixing in C.C. 1:5:10

In Words: Rupees Fifty-Four Lakh Eighty Thousand Nine Hundred Thirteen and Eight Paise Only.

I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated

rate mentioned above. Amount of my /our tender works out as under.

* Estimated Amount * Estimated Amount

put to tender put to tender

Deduct :…………% Below Add :………%Above

In Words …………………………………… In Words………………………………

* (Please strike out whichever is not applicable).

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge

for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per

actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the

rate of input rate mentioned in all the tender.

5 The amount of dismentalled credit materials at Rs. 0 shall be deducted from first R.A. Bill.

6 The Contractor will have to submit the mix design for different grades of Cement Concrete & Asphalt at his own cost

before execution as directed and to be approved from the engineer in charge.

Deputy Executive Engineer Executive Engineer

Rajpipla (R&B) Sub-Division Rajpipla (R&B) Division

Rajpipla Rajpipla