REPAIRS TO CERTAIN FURNITURE AT DEFENCE LABORATORY JODHPUR

Amount

WOODEN FURNITURE TABLE OFFICE CLERK (Drg. No.DB-4120): Removing old and unserviceable parts / components of “Table office clerk wooden” and S&F new parts / components of same size, existing pattern and same material with Glue, Bamboo pins, screws etc. including tightening of joints, and polishing to match the existing all as shown on drawing & as directed by Engineer-in-charge. (a) Drawer made of 12mm thick particle board with one side teak finish in front side and 06mm thick ply wood for bottom including teak wood edging.

(b) Leg made to shape with first class hard wood (teak wood)

(c) Long stiffener made out of frist class hard wood (teak wood)

(d) short stiffener made out of frist class hard wood (teak wood)

(e)Table top, 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.

(f)Material & Laboure for one coat of french polishing the complete table.

TABLE OFFICE OFFICER (DB-4112) :-Removing old and unserviceable parts / components of “Table office Officers wooden” and S&F new parts / components of same size, existing pattern and same material with Glue, Bamboo pins, screws etc. including tightening of joints, and polishing to match the existing all as shown on drawing & as directed by Engineer-in-charge. (a) Drawer made of 12mm thick particle board with one side teak finish in front side and 06mm thick ply wood for bottom including teak wood edging.

(b) Leg made to shape with first class hard wood (teak wood)

(c) Door made out of particle board 18/19 mm thick, one side teak veneered with knob and brass lock 4 lever Make Godrej

(d) Shelf made out of 18/19 mm thick plain particle board commercial type.

(e)Material & Laboure for one coat of french polishing the complete table.

(f)Table top, 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.

TABLE DRESSING GENTS (FD-230) :-Removing old and unserviceable parts / components of “Table office Officers wooden” and S&F new parts / components of same size, existing pattern and same material with Glue, Bamboo pins, screws etc. including tightening of joints, and polishing to match the existing all as shown on drawing & as directed by Engineer-in-charge. (a) Drawer made of 12mm thick particle board with one side teak finish in front side and 06mm thick ply wood for bottom including teak wood edging.

(b) 5.50mm thick looking mirror with 6mm thick commercial plywood

(c) Long rail of first class hard wood (teak wood) for looking glass frame.

(d) Short rail of first class hard wood (teak wood) for looking glass frame.

(e) Knob of brass metal

(f) M&L one coat of french polishing the complete table dressing table gents

CHAIR DINNING (Drg. No. FD-279): Removing old and unserviceable parts / components of “Chair dining” and S&F new parts / components of same size, existing pattern and same material with Glue, Bamboo pins, screws etc. including tightening of joints, and polishing to match the existing all as shown on drawing & as directed by Engineer-in-charge. (a) Front leg made of 1st class hard wood (teak wood).

(b) Rear leg made of 1st class hard wood (teak wood).

(c) Back rest made of 1st class hard wood (teak wood).

(d) Stiffener made of 1st class hard wood (teak wood).

(e) Front/rear/side rail including making holes for canning, made of 1st class hard wood (teak wood).

(f) M&L for one coat polishing the complete Chair dining.

CHAIR EASY (Drg. No. FD-229): Removing old and unserviceable parts / components of “Chair easy” and S&F new parts / components of same size, existing pattern and same material with Glue, Bamboo pins, screws etc. including tightening of joints, and polishing to match the existing all as shown on drawing & as directed by Engineer-in-charge. (a) Front leg made of 1st class hard wood (teak wood).

(b) Rear leg made of 1st class hard wood (teak wood).

(c) Front/rear/side rail of seat including making holes for canning, made of 1st class hard wood (teak wood).

(d) Arm rest made of 1st class hard wood (teak wood).

(e) Back rest made out of first class hard wood (teak wood).

(f) Stiffener made out of first class hard wood (teak wood).

(g) M&L for one coat of french polishing the complete Chair easy

CHAIR WRITING (Drg. No. FD-280): M&L for replacement of following unserviceable/defective parts with new one by using bamboo nails and Fevicol including tightening joints and polishing to match the existing all as shown on drawing & as directed by Engineer-in-charge. : - (a) Front leg made of 1st class hard wood (teak wood).

(b) Rear leg made of 1st class hard wood (teak wood).

(c) Back rest made of 1st class hard wood (teak wood).

(d) Stiffener made of 1st class hard wood (teak wood).

(e) Hand rest made of 1st class hard wood (teak wood).

(f) Front/rear/side rail including making holes for canning made of 1st class hard wood (teak wood).

(g) M&L one coat of french polishing the complete Chair writing

TABLE WRITING (Drg. No. FD-33/248/275): Removing old and unserviceable parts / components of “Table writing” and S&F new parts / components of same size, existing pattern and same material with Glue, Bamboo pins, screws etc. including tightening of joints, and polishing to match the existing all as shown on drawing & as directed by Engineer-in-charge. (a) Top, 19mm thick pre-laminated particle board, exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.

(b) Leg made of 1st class hard wood (teak wood).

(c) Front/rear top rail made of 1st class hard wood (teak wood).

(d) Stiffener made of 1st class hard wood (teak wood).

(e) Door made out of particle board 18/19mm thick,one side teak veneered with knob and brass lock 4 lever make godrej

(f) Drawer made of 12mm thick particle board with one side teak finish in front side and 06mm thick ply wood for bottom including teak wood edging.

(g) M&L one coat of french polishing the complete Table writing

TABLE DINNING 8/6 PERSONS (Drg. No. FD-273/30/239):Removing old and unserviceable parts / components of “Table dining 6 or 8 person” and S&F new parts / components of same size, existing pattern and same material with Glue, Bamboo pins, screws etc. including tightening of joints, and polishing to match the existing all as shown on drawing & as directed by Engineer-in-charge. (a) Leg made to shape with 1st class hard wood (teak wood).

(b) Top long rail made of 1st class hard wood (teak wood).

(c) Top short rail made of 1st class hard wood (teak wood).

(d) Table top (Table dinning 8 persons) made out of 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.

(e) Table top (Table dinning 6 persons) made out of 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.

(f) M&L one coat of french polishing the complete Table dining 6 or 8 persons

TABLE CENTRAL (Drg. No. FD-235/ 274): Removing old and unserviceable parts / components of “Table Central” and S&F new parts / components of same size, existing pattern and same material with Glue, Bamboo pins, screws etc. including tightening of joints, and polishing to match the existing all as shown on drawing & as directed by Engineer-in-charge. (a) Table top, 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.

(b) Leg made to shape with 1st class hard wood (teak wood)

(c) Front / rear top rails made of 1st class hard wood (teak wood).

(d) Side top rails made of 1st class hard wood (teak wood).

(f) M&L one coat of french polishing the complete Table central

PEG TABLE (Drg. No. FD-277):Removing old and unserviceable parts / components of “Peg Table” and S&F new parts / components of same size, existing pattern and same material with Glue, Bamboo pins, screws etc. including tightening of joints, and polishing to match the existing all as shown on drawing & as directed by Engineer-in-charge. (a) Table top, 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.

(b) Leg made of 1st class hard wood (teak wood).

(c) Top long rail made of 1st class hard wood (teak wood).

(d) Top short rail made of 1st class hard wood (teak wood).

(e) M&L one coat of french polishing the complete peg Table

TABLE BED SIDE (Drg. No. FD-276) :-Removing old and unserviceable parts / components of “Table bed side” and S&F new parts / components of same size, existing pattern and same material with Glue, Bamboo pins, screws etc. including tightening of joints, and polishing to match the existing all as shown on drawing & as directed by Engineer-in-charge. (a) Leg made out of first class hard wood (teak wood).

(b) Bottom long rail made out of first class hard wood (teak wood).

(c) Bottom short rail made out of first class hard wood (teak wood).

(d) Shelf made out of 12 mm thick pre-laminated particle board, exterior grade pre- laminated one side with decorative choice lamination and other side balancing white lamination with 4 mm thick teak wood beading on front side.

(e) Top and sides made out of 18 mm thick pre-laminated particle board, exterior grade pre- laminated one side with decorative choice lamination and other side balancing white lamination with 4 mm thick teak wood beading on exposed edges.

(f) Back plywood made out of 6 mm thick commercial face plywood.

(g) M&L one coat of french polishing the complete Table bed side

CHAIR CBA WOODEN (Drg No:-FD-4124) :-Removing old and unserviceable parts / components of “Chair CBA Wooden” and S&F new parts / components of same size, existing pattern and same material with Glue, Bamboo pins, screws etc. including tightening of joints, and polishing to match the existing all as shown on drawing & as directed by Engineer-in-charge. (a) Rear leg made out of first class hard wood (teak wood).

(b) Front leg made out of first class hard wood (teak wood).

(c) Side rail made out of first class hard wood (teak wood).

(d) Front rail made out of first class hard wood (teak wood).

(e) Back rail made out of first class hard wood (teak wood).

(f) Hand rest made out of first class hard wood (teak wood).

(g) Stiffener made out of first class hard wood (teak wood).

(h) M&L for one coat polishing the complete Chair CBA Wooden.

Supply and fix in repairs long rails of bed hard /bed newar made out of second class Hard wood size & shape as per drawing complete all asspecified and shown in drawing

Supply and fix in repairs top of “bed plywood / charpoy JCOs plywood / charpoy ORs / charpoy folding made out of 12 mm thick plywood commercial face in one face, size & shape as per drawing complete all as specified and shown in drawing.

Supply and fix in repairs head board of bed plywood including polishing complete all as shown on drawing and as directed by Engr-in-Charge.

Supply and fix in repairs foot board of bed plywood including polishing complete all as shown on drawing and as directed by Engr-in-Charge.

Material and laboure for preparation of old polished surface of wooden bed and applying one coat polish complete all as shown on drawing and as directed by Engr-in-Charge.

Removing old and unserviceable parts / components of “charpoy newar” and S&F new parts / components of same size, existing pattern and same material with Glue, Bamboo pins, screws etc. including tightening of joints, and polishing to match the existing all as shown on drawing & as directed by Engineer-in-charge.(a) Long rail made out of second class hard wood (Sal wood).

(b) Short rail made out of second class hard wood (Sal wood).

(c) Leg made out of Shishem wood.

M & L for reweaving of charpoy newar / bed newar with 55 to 60 mm wide cotton tape newar superior quality closely weave both side (top and bottom) using newar not less than 3.00 Kg per charpoy by weight including removal of old unserviceable newar, and including tightening of joints of charpoy frame with wooden wedges before weaving all as specified and shown in drawing and as directed by Engineer-in-Charge.

Repairs / upholstering to sofa chairs five seated (two Nos single seated with arms and three Nos single seated without arms) by removing old unserviceable tapestry cloth and Dasooti cloth, long cloth, coir, cotton layer, Hessian cloth etc, tightening of joints of wooden frame and supply and fix new tapestry cloth and Dasooti cloth, long cloth, coir, cotton layer, Hessian cloth etc complete, all as specified and shown in drawing and as directed by Engineer-in-Charge.

Removing old unserviceable cushion cover from cushion of sofa set 4 / 5 seat and Supply and fix new cushion cover made out of velvet tapestry cloth of approved quality, suitable for cushion of size 550 mm x 530mm x 100 mm thick, all as specified and shown in drawing and as directed by Engineer-in-Charge.

Removing old unserviceable cushion from sofa set 4 / 5 seat and Supply and fix new foam cushion of size 550 mm x 530mm x 100 mm thick covered with velvet tapestry cloth of approved quality, all as specified and shown in drawing and as directed by Engineer-in-Charge.

M&L painting to following steel furniture with one coat of synthetic enamel paint including preparation of surfaces, of tint olive green (OG)/white/black/gray complete all as specified and as directed by Engineer-in-charge: - (a) Almirah large steel with shelves.

(b) Almirah medium steel with shelves

(c) Almirah large steel with glass doors

(d) Almirah large steel library godrej pattern

(e) Chair CBA steel with arms.

(f) Chair CBB steel with arms.

(g) Rack steel open large size 6'x6'x2'

(h) Rack stationary steel

(i) Rack side steel

(j) Table office steel clerk / typist

(l) Table office officers steel

(m) Stool steel of any size

(n) FMN set of charpoy newar / charpoy GI /bed hard /cot hard (black paint)

(o) Bed iron folding

(p) Locker bed side steel.

(q) Book self open large steel.

(r) Book self small steel

STEEL- FURNITURE :- ALMIRAH LARGE STEEL WITH SHELVES (FD-97(M)/113/1033): Removing old and unserviceable parts / components of “Almirah large steel, Almirah large steel (Godrej pattern)” and S&F new parts / components of same size, existing pattern and same material, with appropriate welding or screw, nut, bolt complete all as shown on drawing & as directed by Engineer-in-charge. (a) MS lock 6 livers best quality with brass livers & duplicate key

(b) Leg made out of 1.00 mm thick mild steel plan black sheet including painting with two coats synthetic enamel paint over one coat of red oxide primer with spray machine.

(c) Shelves made out of 1.00 mm thick mild steel plan black sheet including painting with two coats synthetic enamel paint over one coat of red oxide primer with spray machine

(d) Door made out of 1.00 mm thick mild steel plan black sheet including painting with two coats synthetic enamel paint over one coat of red oxide primer with spray machine.

(e) Mild steel chromium plated handle 125 mm size

ALMIRAH MEDIUM STEEL WITH SHELVES (FD-67(M)/350/1032):- M&L for replacement of following unserviceable/defective parts with new one and painting with two coats of synthetic enamel paint over acoat of red oxide zin chrome primer complete all as shown on drawing and as specified: - (a) MS lock 6 livers best quality with brass livers & duplicate key

(b) Leg made out of 1.00 mm thick mild steel plan black sheet including painting with two coats synthetic enamel paint over one coat of red oxide primer with spray machine.

(c) Shelves made out of 1.00 mm thick mild steel plan black sheet including painting with two coats synthetic enamel paint over one coat of red oxide primer with spray machine

(d) Door made out of 1.00 mm thick mild steel plan black sheet including painting with two coats synthetic enamel paint over one coat of red oxide primer with spray machine.

(e) Mild steel chromium plated handle 125 mm size

TABLE OFFICE CLERK STEEL (FD-1004/84M): M&L for replacement of following unserviceable/ defective parts with new one complete all as shown on drawing and as specified: - (a) ) MS lock 4 brass livers, best quality with duplicate key for drawer.

(b) Table top made out of 19 mm thick pre-laminated particle board, exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.

(c) Drawer made out of 1.00 mm thick mild steel plan black sheet including painting with two coats synthetic enamel paint over one coat of red oxide primer with spray machine

(d) Legs made out of mild steel square tube not less than 16 gauge, cut to size and fixed through welding.

TABLE OFFICE OFFICERS STEEL (FD-84M/1003): M&L for replacement of following unserviceable/defective parts with new one complete all as shown on drawing and as specified:- (a) Table top, 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.

(b) Drawer made out of 1.00 mm thick mild steel plan black sheet including painting with two coats synthetic enamel paint over one coat of red oxide primer with spray machine.

(c) Door of unit made out of 1.00 mm thick mild steel plan black sheet including painting with two coats synthetic enamel paint over one coat of red oxide primer with spray machine.

(d) MS lock 4 brass livers, best quality with duplicate key for drawer.

(e) Leg made out of mild steel square tube not less than 16 gauge, cut to size and fixed through welding.

LOCKER BED SIDE STEEL (FD-127(M)): M&L for replacement of following unserviceable / defective parts with new one complete all as shown on drawing and as specified: - (a) MS lock with key.

(b) MS Chromium plated handle.

(c) Leg made out of 1.00 mm thick mild steel plan black sheet including painting with two coats synthetic enamel paint over one coat of red oxide primer with spray machine.

(d) Shelves made out of 1.00 mm thick mild steel plan black sheet including painting with two coats synthetic enamel paint over one coat of red oxide primer with spray machine.

(e) Mild steel chromium plated Hasp & staple.

(f) Door of unit made out of 1.00 mm thick mild steel plan black sheet including painting with two coats synthetic enamel paint over one coat of red oxide primer with spray machine.

CHAIR CB STEEL WITHOUT ARMS (FD-75M): M&L for replacement of following unserviceable/defective parts with new one complete all as shown on drawing and as specified: - (a) MS round bar 10mm dia 200mm long 2 Nos in each Chair at bottom through welding.

(b) MS flat in 25x3mm, thick, 50mm long 6 Nos in each Chair under seat frame through welding.

(c) Bottom seat frame wooden duly cane woven and black painted, fixed with screws (Godrej pattern)

(d) Back frame wooden duly cane woven and black painted, fixed with screws (Godrej pattern)

(e) M&L for painting to chair frame with one coat of synthetic enamel paint of tint olive green (OG).

(f) Second class HW hand rest including black enamel painting.

CHARPOY GI PIPE WITH NYLON NEWAR (FD-220): M&L for replacement of following unserviceable /defective parts with new one complete all as shown on drawing and as specified by Engineer-in-charge: - (a) Long rail of GI pipe medium grade duly treaded.

(b) To convert long rail into short rail obtained from item No 30 (a) above and fixed

(c) To convert long / short rail into legs obtained from item No 30 (a) & (b) above and provision of top and bottom clamp for MNF set fabricated with 25x3 mm flat and washer and welding 3mm thick 40mm dia MS plate at bottom of legs and painting of clamp and plate with 2 coats of black japan paints over one coat of red oxide primer.

(d) MCI elbow 32mm (ISI marked).

(e) Check nut 32mm.

(f) Weaving the charpoy closely with new 50/55 mm wide nylon newar light colour, 1st quality (not recycled), weight of nylon newar for each charpoy not less than 1.5 Kg.

S & F top clamp for MNF set of charpoy GI, fabricated with 25 x 3mm thick Flat Iron welded to leg of charpoy and applying 2 coats of Black Japan paint over a coat of red oxide primer including removing old unserviceable clamp all as specified and shown in drawing and as directed by Engineer-in-Charge.

Supply and fix by welding 3 mm thick mild steel plain black sheet 40 mm dia at bottom of legs of charpoy GI and applying 2 coats of Black Japan paint over a coat of red oxide primer including removing old bottom plate of legs complete all as shown in drawing and as directed by Engineer-in-Charge.

Removing old unserviceable nylon newar from GI Charpoy & supply and fix of 12mm thick plywood commercial type (ISI marked) of size 1980mmx900mm with and including 10 Nos hooks/cleat (3 Nos welded on each long rails and 2 Nos welded on each short rail) made wih MS flat iron 40x6mm and 40mm long duly holed suitable for 6mm dia bolts, 10 nos bolts & nuts 6mm dia 25mm long with 3mm thick washers, two numbers 40x6mm size MS flat iron stiffner between long rails fixed at 660mm equal distance from short rails fixed with and including 5 to 6mm dia 60mm dia long bolts, nut 3mm thick washer including necessary drilling,welded portion to be grinded smoothly and applying two coats of aluminium paint over a coat of aluminium paint on steel surfaces complete all as speciied and as directed (FD-220). Make: Kitply, National ply, Central India or any make approved by E-in C.

M&L reweaving of wooden chair with 2.00to2.50 mm white/pale cream plastic cane in following wooden chair all as shown on drawing and as specified by Engineer-in-charge: - (a) Back & Seat of easy chair.

(b) Back & Seat of dining chair.

(b) Back & Seat of writing chair.

PRAFUL ENTERPRISES

M/S CHANDER SHEKHAR

M/s B. S. Solanki Builders