SEC-VI/ITA/SE(E/M)-03 of 2025-26 SL-01

Amount

Supplying & delivery of 7.5 Mtr conical flenged tied GRP street light pole made by CNC filament welding machine using thermoset resin, top ID 85, bottom ID 216, thick 5mm, 1.0 mtr single arm, flanged made up of MS-GRP coating as per direction of EIC. Make- Bajaj/Fibro Plastichem/Tex Wear/Strongbond

Supply & fixing of 120 watt LED street light as per approved technical specification of UD&MA department

Design drawing & civil foundation (size- 1.5mx06mx06m) work & erection of upto 10mtr long conical / cylindical flenged type GRP street light pole by earthwork in excavation of foundation trench approx 1.7 5 mtr x 1.1 mtr x1.1 mtr including removing of soil and necessery trimming the side of trench levelling, dressing, & after that picked jhama brick soling & dressing bed levelling & filling joints & pcc after that tor rod size, stirrups, binders etc & vertically MS tor rod suitable dia complete with binding with black annealed wire, shuttering & concrete including fixing of pole foundation boilts( with graded stonechips 20 mm as IS proportion (1:2:4) complete & water vrigidity next seven days.

Supply of 1100 volt Grade PVC/XLPE insulated armoured AJumnium conduc tor cables (HD) , Glowstar/polycab/ Havells

i) 4C x 10Sq mm Armoured

i) 4C x 16 Sq mm Armoured

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Laying of cable upto 50 sqmm through existing RCC / HUME/GI pipe for single , 2, 3, 3 1/2 & 4 core cable .

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. 65MM DIA PIPE

Laying PVC/GF/MS pipe in UG tranch 460 mm width x 760 mm av. depth including excavation , filling the tranch with shifted soil, laveling up and restoring the surface duly rammed.

Supply brass compression gland and making and termination sullable for the following AL/ Cu conductor PVC insulated cable or 1.1KV grade as required.

a) 4 X 10 sq.mm

b) 4 X 16 sq.mm

Supplying cable socket(lug) and making core termination including soldering/crimping etc sutiable for the following PVC insulated AU/CU conductor as required inciuding making connection (cable socket made of aluminium)

a) 4 X 10 sq.mm

a) 4 X 16 sq.mm

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. 3 x 22/0.3 (1.5 sqmm)

Earthing with 50mm d1a GI Pipe 3.64mm thtCk x 3.04mtr long and 1 x 4 SWG GI (Hot Dip) Wire (4mtr 1ong) 13mm x 80 mm long Gt bolts double nuts, double washers inciuding S & F 15- mm dIa GI pipe protection (1mtr long) to be filed with bitumen partly under ground level and partly above the ground level dnven to an ave depth of 3.65mtr below the ground level and restoring surface duly rammed as below 1) For Morrum SoiI by ISI -Medium GI Pipe

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages a) solid GI wire ii) No. 6 SWG 3 mtr each for 75 poles= 225 12 m each for 2 feeder piller box= 24

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required SIZE- 4 x 80/0.4 (10 sqmm)

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 32A HAVELLS

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 100A HAVELLS

Painting Block Letters or Digits within a circle/square as required, with ”Black Japan” paint of approved make & brand, the size of letters and digits as given below, Size 50 mm and upto 75 mm

Supplying & Erection of big size feeder pillar box of Size (1372 x 914 x 607 mm) made up of 3.15 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box will be painted by 2 cores of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35x35x3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C.

Microtunnelling arrangement and laying of 65mm dia 5mm thick HD PVC pipe through earth below 1m ground level comptete with arrangement of machinery, pipe etc

Supply and Fixing of fuse unit complete with base and bridge on existing Board and necessary connection, for the 60 Amp. / 63 Amp., 415 V

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection, legrand- 6-32A(SP)

Supplying of Bakelite sheet a) 3 mm thick

Supply and delivery of Electronic Timer suitable for 240/ 360/415V, 50 Hz(Make: L&T/ABB/Schneider/Simence/ GE/Minilic) of the following time (Second) range:b) 12.0 to 120.0

Supply and fixing of 240/230 volt, 50 Hz, T.P., power contactor (Make: L & T/ABB/Schneider/Simence/ GE) having contact block of the following range g) 50-85Amp

STARLITE ENTERPRISE (BID ID -6669207)

D.C.Eng.Co (BID ID -6648558)