Construction of New Samras Boys Hostel (Cap-125) Building at Isroli, Tal.Bardoli, Dist.Surat.

Name of work :- Construction of New Samras Boys Hostel (Cap-125) Building at Isroli, Tal.Bardoli, Dist.Surat.

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

1 Excavation for foundation upto 1.50 mt depth including sorting out and stacking of 2650.90 Cumt 122.94

useful materials and disposing the excavated stuff upto 50 mt lead (A) Loose or soft

2 Excavation for foundation 1.50 mt to 3.00 mt depth including sorting out and 1089.20 Cumt 170.87

stacking of useful materials and disposing the excavated stuff upto 50 mt lead (B)

Dense or hard soil.

3 Filling in foundation and plinth with sand in layers of 20 cm. Thickness including 209.30 Cumt 481.80

watering ramming and consolidating etc. comp.

4 Filling available excavated Earth (Excluding Rock) in trench plinth side of 1589.20 Cumt 136.92

foundation in layer not excluding 20 cm in depth consolidation each deposited layer

by ramming and watering etc. complete.

5 Filling foundation and plinth with murrum or selected soil in layer of 20 cm in 299.30 Cumt 301.78

thickness including ramming watering and consolidating etc. complete.

6 Applying general insecticide pest control treatment to floor,cupboards etc including 2997.90 Sqmt 91.63

labour materials etc.complete.using lmidacloprid 30.5 Scas per IS 6313 part -III

(0.075% concentration by mass) is recommended 10.5ml chemical diluted with

liter of water application 0.5 liter chemical / Sqm of surface is recommended as per

7 Providing and laying controlled cement concrete M-150 and curing complete 301.20 Cumt 3958.25

including the cost of formwork But excluding the cost of reinforcement for

reinforced concrete work in (A) Foundations and Plinth PCC.

8 Providing and laying controlled cement concrete M-250 and curing complete 446.90 Cumt 4691.45

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (A) Foundations, footings and Mass concrete. footing.

9 Providing and laying controlled cement concrete M-250 and curing complete 99.00 Cumt 7879.01

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (d) columns Up to Plinth level.

10 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- Crushed 142.30 Cumt 3231.26

stone aggregates 40 mm nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth.

11 Providing and laying controlled cement concrete M-200 and curing complete 65.30 Cumt 7865.88

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts and struts Ground FLOOR.

12 Providing and laying controlled cement concrete M-200 and curing complete 47.10 Cumt 7906.28

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts and struts First FLOOR.

13 Providing and laying controlled cement concrete M-200 and curing complete 44.90 Cumt 7947.69

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts and struts Second FLOOR.

14 Providing and laying controlled cement concrete M-200 and curing complete 44.90 Cumt 7988.09

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts and struts Third FLOOR.

15 Providing and laying controlled cement concrete M-200 and curing complete 17.80 Cumt 8029.50

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts and struts 4th FLOOR.

16 Providing and laying controlled cement concrete M-250 and curing complete 145.40 Cumt 5986.27

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Ground & Plinth BEAMS.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

17 Providing and laying controlled cement concrete M-150 and curing complete 82.50 Cumt 4336.94

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (C) Plinth Slabs.

18 Providing and laying controlled cement concrete M-200 and curing complete 107.60 Cumt 6225.64

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (C) Ground floor Beams.

19 Providing and laying controlled cement concrete M-200 and curing complete 103.90 Cumt 6266.04

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (C) First floor Beams.

20 Providing and laying controlled cement concrete M-200 and curing complete 101.00 Cumt 6307.45

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (C) Second floor Beams.

21 Providing and laying controlled cement concrete M-200 and curing complete 101.00 Cumt 6347.85

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (C) Third floor Beams.

22 Providing and laying controlled cement concrete M-200 and curing complete 9.30 Cumt 6389.26

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (C) 4th floor Beams.

23 Providing and laying controlled cement concrete M-200 and curing etc. complete 10.20 Cumt 5930.72

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (c) Chhajja for Ground floor.

24 Providing and laying controlled cement concrete M-200 and curing etc. complete 9.70 Cumt 5972.13

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (c) Chhajja for First floor.

25 Providing and laying controlled cement concrete M-200 and curing etc. complete 9.70 Cumt 6012.53

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (c) Chhajja for second floor.

26 Providing and laying controlled cement concrete M-200 and curing etc. complete 9.70 Cumt 6053.94

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (c) Chhajja Third floor.

27 Providing and laying controlled cement concrete M-200 and curing etc. complete 0.20 Cumt 6094.35

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (c) Chhajja Fourth floor.

28 Providing and laying controlled cement concrete M-200 and curing etc. complete 4.90 Cumt 7061.92

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (c) Lintel for Ground floor.

29 Providing and laying controlled cement concrete M-200 and curing etc. complete 6.30 Cumt 7103.33

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (c) Lintel for First floor.

30 Providing and laying controlled cement concrete M-200 and curing etc. complete 6.30 Cumt 7143.73

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (c) Lintel for Second floor.

31 Providing and laying controlled cement concrete M-200 and curing etc. complete 6.30 Cumt 7185.14

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (c) Lintel for Third floor.

32 Providing and laying controlled cement concrete M-200 and curing etc. complete 0.10 Cumt 7225.50

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (c) Lintel for 4th floor.

33 Providing and laying controlled cement concrete M.200 and curing complete 125.00 Cumt 6706.40

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (C) Ground floor Slab.

34 Providing and laying controlled cement concrete M-200 and curing complete 108.70 Cumt 6747.81

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (C) First Floor slab.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

35 Providing and laying controlled cement concrete M-200 and curing complete 106.10 Cumt 6788.21

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (C) Second Floor slab.

36 Providing and laying controlled cement concrete M-200 and curing complete 106.10 Cumt 6829.62

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (C) Third Floor slab.

37 Providing and laying controlled cement concrete M-200 and curing complete 8.30 Cumt 6870.02

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (C) 4th floor Slab.

38 Providing and laying controlled cement concrete M-200 and curing etc. complete 5.20 Cumt 7468.95

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (E) Stair case up to floor two level for Ground Floor to

39 Providing and laying controlled cement concrete M-200 and curing etc. complete 2.80 Cumt 7510.36

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (E) Stair case up to floor two level for First Floor to

40 Providing and laying controlled cement concrete M-200 and curing etc. complete 2.80 Cumt 7550.76

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (E) Stair case up to floor two level for second to third

41 Providing and laying controlled cement concrete M-200 and curing etc. complete 2.80 Cumt 7592.17

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (E) Stair case up to floor two level for Third Floor to

42 Providing and laying controlled cement concrete M-250 and curing etc. complete 258.70 Cumt 6984.15

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in RCC wall for Below plinth.

43 Providing and laying controlled cement concrete M-200 and curing etc. complete 5.40 Cumt 6946.78

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in RCC wall for Ground floor.

44 Providing and laying controlled cement concrete M-200 and curing etc. complete 5.40 Cumt 6987.18

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in RCC wall for First floor.

45 Providing and laying controlled cement concrete M-200 and curing etc. complete 5.40 Cumt 7028.59

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in RCC wall for Second floor.

46 Providing and laying controlled cement concrete M-200 and curing etc. complete 5.40 Cumt 7068.99

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in RCC wall for Third floor.

47 Providing and laying controlled cement concrete M-200 and curing etc. complete 40.30 Cumt 7110.40

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in RCC wall for 4th floor.

48 Providing and fixing 90 cm high Stainless steel railing made from anticorrocive 304 48.60 Sqmt 3467.33

grade S S pipe of 50 mm dia (16Gauge) as hand rail with S S 304 grade Baluster of

38 mm dia (16Gauge) as a vertical support fixed in RCC slab at 1.2m c/c including

three horizontal S S pipes of 25 mm dia (16Gauge) at eqal distance fixed by

mm dia (16Gauge) S S pipe with baluster including accessories as per detailed

drawing as directed etc. complete.

49 Providing and fixing 65cm high M.S. Raling with MS Pipe Railing made from MS 2708.00 Kgs. 74.74

pipe of 50 mm dia (Rmt/wt 4.50kg) as hand rail with Baluster of 38 mm dia (Rmt/wt

2.99kg) as a vertical support fixed in RCC slab & wall at 1.0m c/c including three

horizontal pipes of 50 mm dia at eqal distance fixed pipe with baluster and Priming

coat & two coat of oil pait including accessories as per detailed drawing as directed

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

50 Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including 326943.00 Kgs. 78.53

bending, binding and placing in position complete up to All floor Level.

51 Brick work using common burnt clay building bricks crushing strength not less than 120.60 Cumt 4214.33

35 kg/sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement : 6 fine sand)

(B) Conventional For below plinth.

52 Brick work using common burnt clay building bricks crushing strength not less than 279.30 Cumt 4503.04

35 kg/sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement : 6 fine sand)

(B) Conventional For Groud Floor.

53 Brick work using common burnt clay building bricks crushing strength not less than 121.80 Cumt 4545.16

35 kg/sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement : 6 fine sand)

(B) Conventional For First Floor.

54 Brick work using common burnt clay building bricks crushing strength not less than 120.80 Cumt 4587.28

35 kg/sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement : 6 fine sand)

(B) Conventional For Second Floor.

55 Brick work using common burnt clay building bricks crushing strength not less than 120.80 Cumt 4629.40

35 kg/sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement : 6 fine sand)

(B) Conventional For Third Floor.

56 Brick work using common burnt clay building bricks crushing strength not less than 21.40 Cumt 4671.51

35 kg/sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement : 6 fine sand)

(B) Conventional For Fourth Floor.

57 Half brick masonry in common brunt clay building bricks having crushing strength 262.80 Sqmt 685.66

not less than 35Kg/Sm. In C.M 1:4 (1cement : 4 coarse sand) in super structure. (B)

Conventional For Groud Floor.

58 Half brick masonry in common brunt clay building bricks having crushing strength 433.50 Sqmt 691.96

not less than 35Kg/Sm. In C.M 1:4 (1cement : 4 coarse sand) in super structure. (B)

Conventional For First Floor.

59 Half brick masonry in common brunt clay building bricks having crushing strength 433.50 Sqmt 698.26

not less than 35Kg/Sm. In C.M 1:4 (1cement : 4 coarse sand) in super structure. (B)

Conventional For second floor.

60 Half brick masonry in common brunt clay building bricks having crushing strength 433.50 Sqmt 704.57

not less than 35Kg/Sm. In C.M 1:4 (1cement : 4 coarse sand) in super structure. (B)

Conventional For Third floor.

61 Providing 20 mm thick double coat mala cement plaster on interior brick / concrete 2019.30 Sqmt 286.10

work for plastering comprising of base coat of 12 mm thick cement plaster in

cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top

coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including

scaffolding curing with 1x1mm Grooves at junction of Structural members etc.

complete. For Ground floor.

62 Providing 20 mm thick double coat mala cement plaster on interior brick / concrete 2015.30 Sqmt 314.16

work for plastering comprising of base coat of 12 mm thick cement plaster in

cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top

coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including

scaffolding curing with 1x1mm Grooves at junction of Structural members etc.

complete. For first floor.

63 Providing 20 mm thick double coat mala cement plaster on interior brick / concrete 2015.30 Sqmt 342.22

work for plastering comprising of base coat of 12 mm thick cement plaster in

cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top

coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including

scaffolding curing with 1x1mm Grooves at junction of Structural members etc.

complete. For second floor.

64 Providing 20 mm thick double coat mala cement plaster on interior brick / concrete 2015.30 Sqmt 370.28

work for plastering comprising of base coat of 12 mm thick cement plaster in

cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top

coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including

scaffolding curing with 1x1mm Grooves at junction of Structural members etc.

complete. For third floor.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

65 Providing 20 mm thick double coat mala cement plaster on interior brick / concrete 88.00 Sqmt 398.33

work for plastering comprising of base coat of 12 mm thick cement plaster in

cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top

coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including

scaffolding curing with 1x1mm Grooves at junction of Structural members etc.

complete. For 4th floor.

66 Providing 10 mm. Thick cement plaster in single coat for plastering on ceiling and 843.90 Sqmt 148.32

soffits of stairs and finished even and smooth in : (I) Cement mortar 1:4 (1 cement :

4 sand) with 1x1mm Grooves at junction of Structural members etc. complete. For

67 Providing 10 mm. Thick cement plaster in single coat for plastering on ceiling and 818.10 Sqmt 172.88

soffits of stairs and finished even and smooth in : (I) Cement mortar 1:4 (1 cement :

4 sand) with 1x1mm Grooves at junction of Structural members etc. complete. For

68 Providing 10 mm. Thick cement plaster in single coat for plastering on ceiling and 806.60 Sqmt 197.44

soffits of stairs and finished even and smooth in : (I) Cement mortar 1:4 (1 cement :

4 sand) with 1x1mm Grooves at junction of Structural members etc. complete.For

69 Providing 10 mm. Thick cement plaster in single coat for plastering on ceiling and 806.60 Sqmt 222.01

soffits of stairs and finished even and smooth in : (I) Cement mortar 1:4 (1 cement :

4 sand) with 1x1mm Grooves at junction of Structural members etc. complete. For

70 Providing 10 mm. Thick cement plaster in single coat for plastering on ceiling and 56.20 Sqmt 246.57

soffits of stairs and finished even and smooth in : (I) Cement mortar 1:4 (1 cement :

4 sand) with 1x1mm Grooves at junction of Structural members etc. complete. For

71 20 mm Thick sand faced Gutka cement plaster on walls for all height above ground 4079.80 Sqmt 315.69

level consisting of 12 mm Thick backing coat of c.m. 1:3 (1 cement : 3 sand) and

mm Thick finishing coat of c.m. 1:1 (1 cement : 1 sand) with 1x1cm Groves at

juction of structure member etc. complete.all height.

72 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 606.70 Rmt 44.28

73 Applying two coats of (white cement based) or (acrylic lappy (putty)) and two coats 11484.60 Sqmt 40.59

of primer of approved brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.

74 Wall painting (Two coats) with plastic emulsion paint of approved brand and 8153.20 Sqmt 84.37

manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand

papered smooth.

75 Wall painting (Two coats) with plastic emulsion paint of approved brand and 3331.40 Sqmt 90.05

manufacture on undecorated ceiling surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign matter

and sand papered smooth.

76 Wall Painting (Two coats) with weather proof acraylic emulsion (Apex or equivalent 4079.80 Sqmt 120.26

type) paint of approved brand and manufacture and of required shade on exterior

wall surface to give an even shade over and including primery coat with Alkaly

resistance primer of approved brand after thoroughly brushing surface to remove all

dust and remains of loose powdered material etc. comp. for all height.

77 Providing And filling with good quality sinder (steam coal) as directed by engineer 158.40 Cumt 454.50

in charge in sunks in layers of 15 cm thick,including watering, placing, ramming

well etc. as directed, for all floor.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

78 Providing 20 mm thick Water proof cement plaster for sunk in single coat on brick / 358.80 Sqmt 317.14

conctrete wall for interor plastering up to floor two level finished even and smooth

(ii) cement mortar 1:3 (1- cement, 3 sand) and mixing waterproofing materials of

approved brand and manufacture in cement mortar in proportion recommended by

the manufacture for All floor.

79 Providing and laying water proofing treatment by conventional method including 1291.20 Sqmt 950.41

cleaning the slab surface by wire brush as directed including provding first layer of

C.M. 1:4 of 40 mm thickness mixed with water proofing compound at rate

prescribed by manufacturer, including putting of brick bats of average thickness

mm Well immerssed in water laid uniformly on first layer of mortar including

applying cement slurry @ rate of 0.08 bag/sqm. on fixed layer of brick bats

including maintaining necessary slope, in second layer 40 mm thick C.M 1:4 mixed

with water proofing compound as directed, including finishing smooth with cement

slurry as directed complete.

80 Providing and laying controlled cement concrete M-200 for RCC work and curing 8.10 Cumt 6002.43

complete including the cost of form work but excluding the cost of reinforcement

for reinforced concrete work in coping on Ground Floor.

81 Providing and laying controlled cement concrete M-200 for RCC work and curing 2.10 Cumt 6042.83

complete including the cost of form work but excluding the cost of reinforcement

for reinforced concrete work in coping on First Floor.

82 Providing and laying controlled cement concrete M-200 for RCC work and curing 2.10 Cumt 6084.24

complete including the cost of form work but excluding the cost of reinforcement

for reinforced concrete work in coping on Second Floor.

83 Providing and laying controlled cement concrete M-200 for RCC work and curing 2.10 Cumt 6124.64

complete including the cost of form work but excluding the cost of reinforcement

for reinforced concrete work in coping on Third Floor.

84 Providing and laying controlled cement concrete M-200 for RCC work and curing 3.00 Cumt 6166.05

complete including the cost of form work but excluding the cost of reinforcement

for reinforced concrete work in coping on 4th Floor.

85 Providing and fixing window having extruded aluminum Colour anodized section 188.60 Sqmt 1713.70

frame main outer size 63.50 x 38.10 x 1.95 mm, horizontal two track member size

61.85 mm x 31.75 mm x 1.20mm , vertical member of size 61.85 mm x 31.75mm x

1.30 mm with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm

(of Jindal Section no:8949 @ wt.of 0.456Kg/mt), vertical member of size 40mm x

18mm x 1.29mm with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for window. W1, W2.

86 Providing and fixing single shutter alluminium colour anodized openable window of 58.00 Sqmt 3446.12

frame 92mm x 31.75mm x 1.00mm size having top, Bottom & vertical shutters of

size 65 x 25 x 1.50mm & bottom shutter including 5 mm thick Transparent tinted

float glass for glazing fixed with Transparent Silicon gasket, Lock Strip with

Standard Extruded Colour Anodized Aluminum Coted fittings and all required

materials labours and equipments as per detail drawing window as directed. For W3.

87 Providing & Fixing in position standard extruded approved colour anodised 56.30 Sqmt 2445.21

Aluminum Ventilator with outer frame 65 x 25 mm Stander Box Frame with 5 mm

thick Transparent Float glass and alluminium strip blade fixed or lovers ventilation

including all required materials, fixtures, fastenning, labours and equipments as per

detailed drawing as directed. For Ventilators V1.

88 Providing & Fixing in position standard extruded approved colour anodised 5.20 Sqmt 2311.89

Aluminum Ventilator with outer frame 65 x 25 mm Stander Box Frame with 5 mm

thick Transparent glass at Top and 5mm thick Frosted Fixed Glass at Bottom Half

alluminium strip blade fixed orlovers ventilation including all required materials,

fixtures, fastenning, labours and equipments as per detailed drawing as directed. For

Ventilators V2.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

89 Providing & Fixing in position standard extruded approved colour anodised 25.20 Sqmt 2830.02

Aluminum Ventilator with outer frame 65 x 25 mm Stander Box Frame with 5 mm

thick Transparent Float glass and alluminium strip blade fixed orlovers ventilation

including all required materials, fixtures, fastenning, labours and equipments as per

detailed drawing as directed. For Ventilators V3.

90 Providing and fixing in position collapsible steel shutters with vertical channel 20 x 15.20 Sqmt 2523.99

10x 2 mm braced with flat iron diagonals 20 x 5 mm size with top and bottom rails

of T_rin 40 x 40 x 6 mm with 38 mm dia,steel pulleys complete with bolts, nuts,

locking arrangements, stoppers, handles including applying priming coat with two

coats of enamel paints etc. Comp.

91 Providing and fixing M S angle openable grilled Door having 65 MM. x 65 MM x 6 2.10 Sqmt 4146.05

MM size M.S. angled welded togather to make a box frame and 20mm dia M.S.

bars to be fixed with it by drilling hole in the angle section and welded at 10 cm C/C

approx including anodized iron fixtures & fastenings including primer coat of

approved quality and two coats of oil paint etc., complet as per detail drawing as

92 Providing and fixing wooden door of 2.95x2.55m of 50mm thick door and hollow 7.60 Sqmt 4867.19

Double flush door shutter made from teak wood frame of size 7.5 cm x 3.8cm with

top,middle,bottom rails & vertical two styles & both side water proof ply wood of

6mm thick. Pivoted the double shutter with requires teakwood batten with 1mm

thick lamination on both side,Two Coloue Pattern, one coat of primer & two coats of

enamel paints on frame & edges, design of which is to be approved by the architect.

Door shall be providing with Floor spring Heavy duty and 60cm long stainless steel

handle and necessary Locking system of Godrej , fixtures & fastenings etc. directed

by engineer in charge.main door D1.

93 Providing and fixing 35 mm thick Double shutter flush door, solid core with Double 15.40 Sqmt 4289.47

Shutter of Factory made & Stamped I.S 12823 Grade one, Type one, melamine

faced three layred resin Flushed Door Having Decorative Lamination on both sides

& 'U' TYPE 2MM. TH. 35MM. X 35MM. SPECIALLY SHAPED MOLDED

COLORED ANODIZED ALUMINUM BEADING FIXED AROUND THE DOOR

FROM HOLDING LICENCE FOR MINIMUM 5 YEARS and 15cm long stainless

steel handle and necessary Locking system of Godrej,Zinc Coated Hinges, S.S

fixtures & fastenings etc. directed by engineer in charge D2, D3.

94 Providing and fixing 35 mm thick flush door Single shutter, solid core with Shutter 149.70 Sqmt 4320.78

of Factory made & Stamped I.S 12823 Grade one, Type one, melamine faced three

layred resin Flushed Door Having Decorative Lamination on both sides & 'U' TYPE

2MM. TH. 35MM. X 35MM. SPECIALLY SHAPED MOLDED COLORED

ANODIZED ALUMINUM BEADING FIXED AROUND THE DOOR, FROM

HOLDING LICENCE FOR MINIMUM 5 YEARS and 15cm long stainless steel

handle and necessary Locking system of Godrej, zinc coated hinges, fixtures &

fastenings etc directed by engineer in charge D4, D6.

95 Providing and fixing 35 mm thick Double shutter flush door, solid core with 7.90 Sqmt 4891.43

Double Shutter of Factory made & Stamped I.S 12823 Grade one, Type one,

melamine faced three layred resin Flushed Door Having Decorative Lamination on

both sides & 'U' TYPE 2MM. TH. 35MM. X 35MM. SPECIALLY SHAPED

MOLDED COLORED ANODIZED ALUMINUM BEADING FIXED AROUND

THE DOOR FROM HOLDING LICENCE FOR MINIMUM 5 YEARS, DOOR

HANDLE, SIGNAGES ETC. AS PER NATIONAL BUILDING CODE

PART 3, ANNEX:B-9 and 15cm long stainless steel handle and necessary Locking

system of Godrej, Zinc Coated Hinges, S.S fixtures & fastenings etc. directed by

engineer in charge D5.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

96 Providing and fixing FRP frame size 100 x 50 mm and 35 mm thick FRP depress 78.80 Sqmt 2542.17

panel Single shutter having extra reinforcement on sides & edges in Gel coat

finish.The core of the shutter & frame is to be filed up with injected fire retradat

grade polyurethene foam done in situ along with embeded wooden pieces for

stiffening & also taking hinges & fintures.The whole FRP frame & shutter is to be

waterproof, weatherproof ,termite proof & resistance to mild acid/alkali.Rates are to

be inclusive of S.S hinges with necessary screws & alluminum fixtures & fastenings

& fartener sleeve.Colour and Shade approved by Engineer-In-Charge. D7.

97 Providing and laying machine cut machine polished Granite stone treads and risers 108.50 Sqmt 1897.79

in Single piece Max length with 1cm projecting, nozing rounded moulding in tread

laid over 12 mm (avg.) thick bases of cement mortar 1:6 (1-cement : 6-coarse sand)

jointed with grey or colour cement slurry including rubbing and polishing incl.

making Three Nos. of grooves of size 3mm X 3mm along the length of treads etc.

98 P & L 60 x 60 cm. Matt Finished Full Body vitrified Tiles flooring Two Colours 36.90 Sqmt 1467.72

Pattern 8 & 10mm Thick Tiles flooring over 20 mm (average) base of cement

mortar 1:6 (1 cement: 6 coarse sand) on new surface or fixing on existing flooring

by adhesive material including dismentaling of existing flooring and jointed with

color cement slurry including finised with flush pointing & cleaning the surface etc.

complete for Two Colours shade, Colour and Shade approved by Engineer-In-

99 P & L 60 x 60 cm. Matt Finished Full Body vitrified Tiles flooring Two Colours 2.10 Sqmt 1592.40

Pattern 8 & 10mm Thick Tiles riser of steps,skirting dedo and pillars laid on 10 mm

thick cement mortar 1:3 (1-cement 3-coarse sand) and jointed with color cement

slurry mixed with pigment to match the shade of slab including finised with flush

pointing & cleaning the surface for antiskit mat finised etc. complete. for Two

Colours shade and Shade approved by Engineer-In-Charge.

100 P & L 60x60 cm. Full Body vitrified Tiles flooring 8 & 10mm Thick Tiles flooring 1898.30 Sqmt 1471.53

over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new

surface or fixing on existing flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete, Colour and Shade approved by

Engineer-In-Charge.

101 P & L 60x60 cm. Full Body vitrified Tiles flooring 8 & 10mm Thick Tiles riser of 173.90 Sqmt 1592.40

steps,skirting dedo and pillars laid on 10 mm thick cement mortar 1:3 (1-cement 3-

coarse sand) and jointed with color cement slurry mixed with pigment to match the

shade of slab including finised with flush pointing & cleaning the surface for

antiskit mat finised etc. complete. Colours and Shade approved by Engineer-In-

102 P & L 60x60 cm. Matt Finished Antisked Full Body Polished vitrified Tiles flooring 136.30 Sqmt 1467.72

8 & 10mm Thick Tiles flooring over 20 mm (average) base of cement mortar 1:6 (1

cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive

material including dismentaling of existing flooring and jointed with color cement

slurry including finised with flush pointing & cleaning the surface etc. complete and

Colour Shade approved by Engineer-In-Charge.

103 P & L 30x60 cm. Polished Vitrified Tiles 8 &10 mm thick in skirting risers of steps 278.30 Sqmt 1592.40

and dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse sand) and jointed

with colour cement slurry Colour and Shade approved by Engineer-In-Charge.

104 P & L 30x30 cm. Matt Finished Antisked Ceramic Tiles 6 mm thick in flooring 102.80 Sqmt 1017.30

treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1-

cement:3-coarse sand) finishing with flush pointing in colour cement slurry etc.

complete. Colour and Shade approved by Engineer-In-Charge.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

105 P & L 30x45 cm. Glazed Vitrified Tiles 6 mm thick in skirting risers of steps and 501.00 Sqmt 1513.28

dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse sand) and jointed with

colour cement slurry.

106 Providing and laying water proofing treatment with broken chine mosaic flooring 993.30 Sqmt 779.70

for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out

upto surface using white cement including rounding off junctions and extending

them upto 15 cm along the wall, clearing with water and oxalic acid etc. as directed.

107 Providing and fixing pre-cast Rubber Dye inter locking concrete block 60mm thick 567.10 Sqmt 706.93

with grade of concrete M300 pnumatic compressed / Vibrated mechanically and as

per approved design confieming to IS 15658: 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line and level as per guidelines of

IRC : SP 63-2018 etc complete.

108 P & L 60x60 cm Machin cut Machin polished Blue Kota Stone slab 25 mm thick 315.10 Sqmt 1015.53

flooring over 20 mm (average) thick base of cement mortar 1:6 (1-cement 6-coarse

sand) and jointed with grey cement slurry mixed with pigment to match the shade of

slab including rubbing and polishing etc.complete.

109 P & L 60x60 cm Machin cut Machin polished Blue Kota Stone slab 25 mm thick in 25.00 Sqmt 1144.15

riser of steps,skirting dedo and pillars laid on 10 mm thick cement mortar 1:3 (1-

cement 3-coarse sand) and jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and polishing etc. complete.

110 Providing and fixing Mirrar polished 18 mm thick Black Granite stone in Single 865.90 Sqmt 2312.90

piece with full round edge and polished of approved quality in clading on Cill &

Jambs and around the doors/ windows/ ventilation with 12 mm thick cement motor

CM (1:4) and fixing with cement slurry & adhesive including moulding of exposed

edges as directed by engineering in charge etc. complete.

111 Providinfg and fixing Safty grills of required pattern for windows/ Door using 8315.00 Kgs. 113.12

necessary M.S angle/ M.S pipe, M.S flats and other structural steel at required

spacing including cutting, welding and fabriction etc. including one coat of primer

of approved quality and two coats of oil painting as per detail drawing etc complete.

112 Providing erecting and fixing double coated (ISI) water tank of required capacity 20000.00 Litre 3.95

each with all necessary fittings and connection etc. complete on terrace.

113 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe (SCH- 225.00 Rmt 195.67

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

114 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe (SCH- 335.00 Rmt 148.12

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

115 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe (SCH- 410.00 Rmt 91.84

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

116 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe (SCH- 640.00 Rmt 72.65

40) for cold water including fittings as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

117 Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) 750.00 Rmt 834.38

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm

length x 196 mm heigh at every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement including cost

of all materials.

118 Providing laying (to level or slopes) and jointing reinforced concrete Light duty non- 400.00 Rmt 678.02

pressure pipes I.S. class NP2 of the following internal diameter with collars and butt

ends prepared for collar joints including testing of joints complete.(D) 300mm.

119 Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) 175.00 Rmt 878.57

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x

145 mm heigh at every 2000 mm center to center or shall be concealed in walls as

directed including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost of all

120 Providing, laying and jointing in true line and level 75 mm dia. UPVC SWRType B 270.00 Rmt 740.33

pipe conforming to IS 13592-1992 with one end plain and other end socketed with

rubbering and fitting conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp at every 2000 mm c/c or shall be

conceled in walss as directed including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

121 Providing and fixing in PVC SWR cowel went 75mm dia to pipes. (B) 75mm dia. 6.00 Nos. 15.66

122 Providing and fixing in PVC SWR cowel went 110mm dia to pipes. (B) 110mm 4.00 Nos. 28.79

123 Providing and fixing MS Z clamp on Wall or celling for Pipe Fitting including all 583.00 Nos. 70.70

type necessary fittings and accessories etc. completed as per directed engineer in

124 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter 89.00 Nos. 599.64

with jali of the following nominal diameter of self cleansing design with C.I scread

down or hinged grating including the cost of cutting and making good the walls.

125 Providing and fixing wash down water closet dual flushing system type (European 16.00 Nos. 4343.00

type W C pan) with integral P and S trap including jointing the trap with soil pipe in

cement mortar 1:1 (1 cement five sand) including providing and fixing plastic seat

cover for wash down WC with CP brass hinges and rubber buffers back plastic seat

and including providing and fixing PVC flushing tank with a pair of C I or MS

bracket with complete fitting such as lead valve siphon 15 mm dia brass ball valve

with polythene float CP brass handle unions and couplings for connection with inlet

out let and over flow pipes 40 mm dia porcelain enameled flush bend including

cutting holes in walls and making good the same connection the flush bend with

cistern and closet vitreous china.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

126 Provision and fixing water closet squatting orissa type W.C. pan size 580mm 14.00 Nos. 1625.09

integral footrest and 100 mm P or S trap and in cluding 25 mm dia CP brass flush

valve and GI inlet connection etc. comp. (A) Vitreous china long pattern white or

127 Providing and fixing brass screw down stop tap.(A) 15mm dia. 83.00 Nos. 205.83

128 Providing and fixing brass screw down stop tap.(C) 25mm dia. 20.00 Nos. 220.82

129 Providing and fixing ball cock of approved. quality as directed. (A) Copper Metal 2.00 Nos. 189.84

130 Providing and fixing Gun metal check or non-return fullway wheel valve. (E) 40mm 4.00 Nos. 663.43

131 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. 34.00 Nos. 1583.44

brackets painted white including sutting holes and making good the same but

excluding fittings. (A) Vitreous China: (ii) Flat Back washbasin 550 mm x v 400mm

size. (i) In white colour.

132 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mm dia. 36.00 Nos. 67.91

133 Providing and fixing Urinal or approved quality including conecting the Urinal with 20.00 Nos. 1074.96

waste pipe, tap etc. complete. (A) White earthenware flat back or corner type size

134 Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia. 36.00 Nos. 78.75

135 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass 34.00 Nos. 859.41

mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge

with C.P. brass screws and washers.

136 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to 34.00 Nos. 616.42

wooden plugs with C.P. brass scews (B) 600mm x 20mm size.

137 Providing and fixing screw down bib taps of following size. (A) Brass screw down 100.00 Nos. 186.83

bib tap polished bright. (i) 15mm dia.

138 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, 36.00 Nos. 308.73

shanks and back nuts. (i) 15mm dia.

139 Providing and fixing in position 300 mm high, 150 mm wide English letters made 150.00 Nos. 707.00

from 1.0 mm thick stainless steel sheet as directed by Engineer in charge with all

necessary tools & plants etc. complete.

140 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and 40.00 Nos. 1246.92

water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard

weight (i) Square mouth traps (B) 150mm x 100mm size P or R type.

141 Constructing brick masonry chamber for underground C.I. Inspection chamber and 24.00 Nos. 3208.77

bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5

precast RCC cover 455mm x 610mm intenal dimensions with frame (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls and bed concrete etc.

complete (i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe

142 Constructing brick masonry chamber for underground C.I. Inspection chamber and 24.00 Nos. 3916.78

bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight

of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

frame 15Kg.) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete. (i) Inside dimensions 500mmx 700mm and 450mm

deep for single pipe line.

143 Extra over items for every additional depth of 0.1M. of part thereof beyond 450mm 20.00 Each 242.39

depth for Brick masonry chamber.(i) for 455mm x 610mm size.

144 Extra over items for every additional depth of 0.1M. of part thereof beyond 450mm 20.00 Each 264.86

depth for Brick masonry chamber. (i) for 500mm x 700mm size.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

145 Providing cement vata (10cm x 10cm size) quarter round in cement mortar 1:1 456.30 Rmt 24.28

including neat cement finishing watering etc. Complete.

146 Providing and fixing MS Ladder of required pattern with MS flats (30x3mm) or 300.00 Kgs. 114.13

round or square bars (12mm) at required spacing & with round headed bolts and

nuts or screws or welding including primer coat of approved quality and two coats

of oil paintas as directed by engineer in charge.

147 Constructing Sandwitch Platform of 18 mm thick Polished Black Granite at top and 19.70 Sqmt 2865.37

25 mm thick Kota stone slab one side polished at bottom with cementing Materials /

adhsives including makeing necessary grooves in walls with Vertical sandwich two

Kotastone 25 mm support every 60 cm centre to centre or as required including all

labour material of approved quality incl. full moulded round front edge granite strip

of one side polished and jointed with grey cement slurry including rubbing and

polishing etc. complete for all floors.

148 Providing and fixing kitchen platform trolley having three drawers of SS (IS 304) of 25.90 Sqmt 12123.03

required size like thali, katleri, perforated, partition, cupsosar type in kitchen

platform having drawer front side and backside by using 19mm thick all proof

plywood of ISI quality all side laminated etc. as directed. The size of SS (IS 304)

basket of size 4" to 18" for thali, dish, katleri, perforated, partition, cupsosar type as

directed including necessary S.S. fittings, handles, nobs, telescopic channels, etc. as

149 Providing and fixing Kitchen sink including cutting holes in walls and making good 2.00 No 2621.95

the same but excluding fittings. (C) SS Sink Glosy ASIS 304 Grade x 1mm thick

with over all size 610x460 mm & bowl size 550x400x200.

150 Providing and fixing 0.45 meter wide sand which type wash counter platform 6.40 Sqmt 3411.78

including supplying and fixing granite stone of 18 mm thick mirror polished on top

and side posiition and vertical strip at front with cement slurry & adhesive including

moulding of both exposed edges over 25 mm thick kotah stone platform fixing in

top and sides and itermediates supports fixing with cement mortar and adhesive and

finishing with C.P. brass waste, M.I. fisher union, pillar tap, Rubber plug all

material and labour and assessories complete etc.

151 Aluminium Composite panelling to drop -fin and front coloum, etc. supply & fixing 92.80 Sqmt 2242.20

of aluminium composite panel (ACP), 4 mm thick in requied colours for

interious/exterious consisting of two layers of aliminium skins of 0.25 mm thick

sandwiching a thermo plastic core in contiouns lamination process with PVDF

coating for interior/exterior grades enduring long colour and no fungal attacks.base

Frame work with aluminium sectoin of 65mm x 25mm shall be Fixed over the brick

work and above aliminium panels shall be fixed to the frame work as cladding with

material-sillicone Dowcorring 789 weather silicone in 995 dow corring. it includes

cost of materials,accesories adhesives scaffolding, wastages, transpot, taxes, fixing

in to a near finish in aesthetic point of view, without any undulation in facies all

complete as per drawing and instuction of engineer-in charge.

152 Providing & laying Two Coats of Synthetic Granular Plaster with backing coat of 20 511.20 Sqmt 742.35

mm. thick Double coat plaster comprising of base coat of 12 mm. thick cement

plaster in cement mortar (1 cement: 4 coarse sand) in rough finishing and 8 mm

thick top coat of cement mortar 1:2 (1 cement : 2 coarse sand) finished with 2 mm

thick incorporating fine filaments made up of polymers and instruction given by

architect or engineer-in-charge etc. complete. (for all heights)

153 Providing and fixing polished 18 mm thick black granite with full round edge and 349.40 Sqmt 2560.35

double side polished of approved quality in between urinal & Cupboard Selvesh

and fixing with cement slurry & adhesive including moulding of both exposed edges

as directed by engineering in charge etc. complete.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

154 Providing & Fixing 114mm wide G.I. Sheets having weight not less than 490 Gm/m 18.80 Sqmt 2777.50

roll formed to create 84mm wide louver snap fixed on special shaped GI channel.

Fix louvers & channels shall finished with powder coating of 55 micron (1)

0.55mm thick sheet.etc. complet as per detail drawing as directed.

155 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 100.00 Rmt 170.36

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps including making good the

wall, ceiling and floor etc. complete. [A] 15 mm.

156 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 200.00 Rmt 253.82

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps including making good the

wall, ceiling and floor etc. complete. [C] 25 mm.

157 Providing and Fixing 15 mm thick 300 mm x 300 mm Tactile Warning Tiles 3.00 Sqmt 1380.67

(Attention Tiles i.e. Tactile Warning Surface Indicator {TWSI}) of Johnsan Endura

Tac Button Yellow Plus or equvqlent make in flooring laid on 20 mm thick cement

mortar 1:6 (1 cement : 6 coarse sand) on new surface and jointed with cement slurry

including finished with flush pointing & cleaning the surface for all floors as per

detailed drawing etc. complete as directed by Architect or Engineer in charge. Thse

tiles shall be Anti Skid, Chemical Resistant, Fade Proof, Frost - Heat & Weather

Proof, High Flexural Strength, Highly Durable, Stain Resistance. All Tactile

Warning Tiles meet the specific size and dimension standards as required by

158 Providing and Fixing a set of wall mounted 38 mm dia U shaped horizontal stainless 2.00 Per Set 2671.45

steel collapsible grab bar, 38mm vertical stainless steel fixed grab rail of grade SS

304 from round pipe supported and 75 mm dia 8 mm thick SS 304 base flange on

wall including anchor fasteners, nuts, accessories as per detailed drawing etc.

complete as directed by Architect or Engineer in charge.

159 Providing & fixing 25mm Thick cupboard of plywood Shutter size1.20 x2.10 mt. 416.80 Sqmt 3363.30

including 19 mm & 6mm thick allproof plywood which BWR confirming to IS

designs & grooves as directed by architectural With Teak wood Fram 25mm x

mm size including lamination of 1.0 mm thick in single or double shade of plain or

texture finish as directed on all visible face including on teak wood batten patti and

0.80 mm white lamination on all non visible faces & remaining faces. Fixing by

necessary S.S. Decorative handle, S.S.stopper, Magnet S.S. Hinges & Polishing of

all teak wood Framing good quality lock with necessary fixtures & fasteners of

standard make as per detail drawing and image also including all labours as

approved by engineer-in-charge etc. complete.

160 Providing and fixing 150 mm Wide approved quality chicken wire mesh at junction 1136.30 Sqmt 54.54

of brick work and RCC work or two dissimilar surfaces, at all heights fixed by nails,

rowal plugs or tag by cement mortar 1:3 before applying the plaster, including

curing, scaffolding all complete as directed.

161 P & L 30x45 cm. Glazed Ceramic Tiles 6 mm thick in skirting risers of steps and 122.40 Sqmt 1127.48

dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse sand) and jointed with

colour cement slurry.

162 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not 1.00 No. 958.17

less than 35Kg.

163 Providing & erecting open well horizontal mono block pump set with cast iron body, 1.00 No. 22119.00

complete for three phase submersible motor having [H] [D] For 5 HP 3 phase open

well horizontal mono block pump set suitable for 1350 LPM to 310 LPM @ 10 to

42 Mtr head suitable for 50/65 mm dia delivery pipe cat-ll.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

164 Supplying & erecting approved make motor control cubical panel (Direct - on - line) 1.00 No. 10276.75

made from 16 G. CRCA sheet duly epoxy powder painted inside and outside with

hinged doors and locking, arrangement consisting of suitable size of ON- OFF

isolator (AC - 3/23duty) main fuses, single phasing preventer, indicating lamps for

R- Y - B phases, overload relay, Automatic water level controller, Ammeter,

Voltmeter each with two way selector switch incoming, wires duly socket crimped,

main contactor & overload relay, start - stop push buttons, to be erected on angle

iron frame grouted on wall as directed. The isolator, overload relay & contactors will

be of L & T, Siemens or BCH make only. (A) DOL up to 5.0 H.P.

165 Providing and fixing rolling shutters of approved make made of 80 mm wide M.S 6.50 Sqmt 4546.01

laths inter-locked together through heir entire length and jointed together at the ends

by end locks mounted on specially designed pipe shaft with bracket plates,guide

channels and arrangement for inside and outside locking with push-pull operation

including the cost of hood cover and sprig etc.complete (A) Shutters having width

166 Drilling in soil with lowering of pipes concrete sealing including gravel packing 110.00 Rmt 393.90

clay breaking and development of bore with air compressor by required capacity

vertical test etc. complete including the cost of benimeter 250mm dia.

167 Supplying slotted PVC pipes of approved quality at site of work confirming to IS. 60.00 Rmt 555.50

168 Supplying PVC plain pipes of approved quality at site of work confirming to IS. 50.00 Rmt 494.90

169 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible 130.00 Rmt 146.45

Submersible copper cable approved make of following Size. (B) 3 Core x 4.0 Sq.

170 Supplying submersible pump set suitable for bore of 150 mm. dia. or more having 1.00 No. 33557.25

three phase motor capacity not more than 7.5 H.P. with following capacity (B) (8

stage) 390 to 350 LPM discharge at 62 to 70 mtrs. head respectively suitable for

50mm dia. delivery pipe Cat.III.

171 Lowering of submersible motor pump set at the depth of following, complete with 1.00 Per Set 2568.43

required. Nos. and size of casing pipes erected by means of proper chain pulley

block & pipe wrenches after checking of threads of each pipe with coupling to take

the load of the pump set and pipe assembly filled up with water (B) Above 60 mtrs.

and Up to 120 mtrs.

172 Providing and fixing to wall ceiling and floor HDP pipes tubes (medium grade) of 80.00 Rmt 513.08

the 50mm nominal bore, tube, fittings and clamps include. Making good the wall

ceiling and floor. (F) 50mm dia.

173 Providing and fixing gun metal cock of non return full way wheel valve. (F) 50mm 1.00 Rmt 959.50

174 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure 350.00 Rmt 339.05

poluthene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall

ceiling and floor. (G)110 mm.

175 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure 50.00 Rmt 721.14

poluthene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall

ceiling and floor.(G)160 mm.

176 Providing junction for rain water juncton chamber of size 0.60x0.60x0.75m with 4.00 Nos. 6544.80

excavation of size 1.96x1.96 m & 0.15m thick c.c.1:2:4 bed concrete including

brick masonary wall in CM 1:6 of 0.75m height & 0.23m thick with 15mm thick

cement plaster inside & outside & 1.06x1.06 RCC (1:2:4) slab of thickness 0.15m

with CRS steel and 0.60mx0.45m cast iron manhole cover with frame weight not

less than 35 kg as per directed by Engineer-in-charge.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

177 Providing Filter chamber of Brick work in C:M 1:6 of size 2.06mx1.20m x1.20m & 1.00 No. 18562.79

excavation dimension of 2.82mx 1.96x1.35m including C.C 1:2:4 bed concrete of

0.15m thick including brick work in c.m 1:6 for 23cm thick wall including 15mm

thick cement plaster inside & outside with cement slurry & 10cm thick RCC 1:2:4

top cover with frame of minimum weight of 35 kg & filling filter material kapchi in

layers (25-40mm & 10-20mm) & BT metal 40mm & sand as per directed by

Engineer-in-charge.

178 Constructing brick masonry chamber for underground C.I. Inspection chamber and 2.00 Nos. 7180.44

bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5

C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions, total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt.

of frame 15Kg.) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete. (iii) Inside dimensions 600mm x 850 mm

and 450mm deep for pipe lines with three or more inlets.

179 Providing and laying cement concrete 1:4:8 (1- Cement : 4- Coarse sand : 8- graded 21.00 Cumt 2745.38

stone aggregates 20 mm nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth.

180 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded 23.00 Cumt 3741.69

stone aggregates 20 mm nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth.

181 Steel work, welded in built up sections framed work including cutting, hoisting, 5287.00 Kgs. 91.08

fixing in position and applying a priming coat of read lead paint & two coat oil

paint. (A) In beams and joists, channels angles Tees, flats, with connecting plates or

angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to

common rafters and the like.

182 Providing and fixing of Ridge flashing for roof panel shall be made out of 0.5 mm 206.00 Sqmt 867.39

thick pre coated GI sheet. The Precoated sheet shall be of minimum 240 mpa steel

grade confirming to IS 14246:1995 and shall have zinc coating of minimum

gsm as per IS:277:1992 , 5-7 microns epoxy primer on both side of the sheet and

polyester top coat 15-18 micron. The PPGI Sheet shall have plastic protective guard

film of minimum 25 microns to avoid scratches during transportation. The ridge

shall be fixed to the steel members by pop rivet or self drilling/self stitching fastners

@ maximum 450 mm c/c along length of capping/flashing etc. complete.

183 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete 316.00 Rmt 374.92

block 30cm length,30cm height and 15cm thick of M250 grade concret as per

approved design and including excavation for fixing in proper line and level,filling

the joint with C:M 1:3 (1cement:3fine sand) etc complete.

184 Providing and laying weep hole in Aburtments, and returns by using A.C. pipe of 113.00 Nos. 89.20

100mm including laying in proper grede and jointing the completed as per detailed

185 Constructing,Providing and Fabricating cattle trap using channel section frame of 9.00 Sqmt 5259.07

size ISMC series 100m x 50 mm (Weight 9.20 kg/Rmt) and ISMC I Section

mm x 75mm (Weight 11.50 kg/Rmt) 1mt C/C Intermediate Support for welding G.I.

Pipe at 12 cm of size 50mm dia Heavy duty in a frame made of channel section of

100mm x 50mm all round including fixing the urit on prepared chamber of

masonary wall using MS hold fast embeded in masnary wall top as directed by

Engineer in charge as per drawing by necessary arrangement etc.complete.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

186 Providing and fixing decorative entrance gate made out of cast iron and various mild 563.00 Kgs. 181.80

steel tabular section combination, the Ornamental entrance gate should be fixed at

compound wall including pattern and die making, cutting, welding, grinding,

fabrication, fixing in position at compound wall with necessary pedestal, bearing

block and other locking arrangement. The entrance gate should be painted with two

coats of priming coat of paint and two coat of oil paint etc complete. As per detail

design and instruction of architect.

187 Providing and fixing concertina coil fencing with punched tape concertina coil 600 150.00 Rmt 359.56

mm dia 10 mt openable length having 50 no rounds per 6 mt length, upto 3mt height

of wall with angle iron (50mm x50mm x5mm) requird shaped As per Directed

Engeenier in charge. placed 2.4mt or 3.00mt apart and with 4 horizontal R.B.T.

reinforced barbed wire (3 mm), stud tied with G.I. staples and G.I. clips to retain

horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all

complete as per direction of Engineer-in-charge, with reinforced barbed tape

(R.B.T.)/Spring core (2.5 mm thick) and weight 43.478 gm/meter at compound wall

for ESR M4/ intakewell.

188 Box cutting the road surface to proper slope and camber for making a base for road 252.00 Cumt 109.41

work including removing the excavated stuff and depositing on the road side slope

as directed upto 50Mt.lead.

189 Construction of granular sub-base 150 mm thick by providing coarse graded 69.00 Cumt 785.78

machine crushed B.T. material satisfying MOST specification of grading I (B.T.

stone aggregate 53 mm to 26.5 mm 35 %, 26.5 to 4.75 mm - 45 % and 2.36 mm

below - 20 %) including spreading in uniform layer with motor grader on prepared

surface, mixing by mix in place method with rotavator at OMC and compacting with

vibratory roller to achieve the desired density etc. complete.

190 Providing and laying wet mix macadam base course 250 mm thick using machine 115.00 Cumt 916.07

crushed B.T. chips as per required gradation mixing with required optimum quantity

of water, conveying the mix to site of work, spreading in to grade and camber with

mechanical paver and consolidation each layer with vibratory roller including cost

of material labour plant and equipment etc. complete.

191 Providing &laying ave. 200 mm thick M-250 grade of controlled cement concrete 92.00 Cumt 5881.23

including dressing sub base providing and laying 200 micron thick LDPE

memberance over prepared sub base providing and mixing recron 3s fiber at

gm/cmt. of concrete placing the concrete and leveling with surface vibrator finishing

the surface with power floater and trowel light brooming on the surface as directed

including Providing and filling exparsion joint having size 20 mm x 115 mm &

filling the expansion joint having size 20 mm x 20mm by using cloper -200 as per

manufacturer's specification and making construction joint having size 10 mm x

10mm by using concrete cutter machine etc. complete.

192 Providing, laying (to level or slopes) and jointing reinforced concrete Light duty non- 74.00 Rmt 659.99

pressure pipes I.S. class NP3 of the following internal diameter with collars and butt

ends prepared for collar joints including testing of joints complete. (i) 300mm.

193 Clearing and grubbing road land including uprooting rank vegetation grass bushes, 0.30 Hect 28455.10

shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier

and disposal of unserviceable materials (C) By mechanical means in area of light

194 Earthwork for embankment including breaking clods, dressing with all lead and lift 7253.00 Cumt 169.28

(excluding watering and consolidation) (E) From Borrow area within 3.0 Km. lead.

195 Rolling of earthwork in layers with power roller including filling in depressions 7253.00 Cumt 23.12

which occur during the process and Watering of earth work as directed.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

196 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete 375.00 RMT 593.79

block 30cm length, 45cm height and 15cm thick of M200 grade concret as per

approved design and including excavation for fixing in proper line and level,filling

the joint with C:M 1:3 (1cement:3fine sand) etc complete.

197 Supplying of yellow or Goradu soil with all lead and Lift including spreading 140.00 Cumt 169.28

watering dressing and rolling with hand roller etc complete Selected soil.

198 Supplying of well rotted FYM manure with all lead and Lift including spreading 7.00 Cumt 303.00

mixing dressing and rolling with hand roller etc. complete.

199 Scarifying the surface of Soil including spreading of DAP fertilizer mixing with Soil 929.00 Sqmt 15.15

properly levelling gand dressing of the plot.

200 Supplying and planting Dibbing semi carpet lawn at distance of abour 15 cm x 15 929.00 Sqmt 25.25

cm after proper anti termite teratment amd rolling the seme by hand roller amd

wetering etc complete.

201 Bowing and developing flowering plants grown in nusery having approximate 50.00 Nos. 35.35

height 4 to 5 ft or Height ad per Landscaps Plan with natural growith of soil packed

in polithyline bag or Earthern pot. Including organic & chemical fertilizer

Pesticides, fungicides, hormones & maintaining the plants up to three months as

deserted. Bottol palm.

202 Bowing and developing flowering plants grown in nusery having approximate 50.00 Nos. 50.50

height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature

colour planted in alump of soil packed in polithyline bag or Earthern pot. Including

organic & chemical fertilizer pesticides, fungicides hormones & maintaining the

plants uo to three months as deserted Trinagle Plan.

203 Bowing and developing flowering plants grown in nusery having approximate 50.00 Nos. 50.50

height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature

colour planted in alump of soil packed in polithyline bag or Earthern pot. Including

organic & chemical fertilizer pesticides, fungicides hormones & maintaining the

plants uo to three months as Jasud.

204 Bowing and developing flowering plants grown in nusery having approximate 50.00 Nos. 70.70

height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature

colour planted in alump of soil packed in polithyline bag or Earthern pot. Including

organic & chemical fertilizer pesticides, fungicides hormones & maintaining the

plants uo to three months as Croton.

205 Bowing and developing flowering plants grown in nusery having approximate 50.00 Nos. 50.50

height 3 to 4 ft or Height ad per Landscaps Plan with natural growith and nature

colour planted in alump of soil packed in polithyline bag or Earthern pot. Including

organic & chemical fertilizer pesticides, fungicides hormones & maintaining the

plants uo to three months as deserted Croton.

206 Bowing and developing flowering plants grown in nusery having approximate 50.00 Nos. 45.45

height 3.5 to 4.5 ft or Height ad per Landscaps Plan with natural growith and nature

colour planted in alump of soil packed in polithyline bag or Earthern pot. Including

organic & chemical fertilizer pesticides, fungicides hormones & maintaining the

plants uo to three months as deserted Croton.

207 Bowing and developing flowering plants grown in nusery having approximate 50.00 Nos. 15.15

height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature

colour planted in alump of soil packed in polithyline bag or Earthern pot. Including

organic & chemical fertilizer pesticides, fungicides hormones & maintaining the

plants uo to three months as deserted Croton.

208 Bowing and developing flowering plants grown in nusery having approximate 50.00 Nos. 25.25

height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature

colour planted in alump of soil packed in polithyline bag or Earthern pot. Including

organic & chemical fertilizer pesticides, fungicides hormones & maintaining the

plants uo to three months as deserted Durenta Varigated.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

209 Bowing and developing flowering plants grown in nusery having approximate 50.00 Nos. 50.50

height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature

colour planted in alump of soil packed in polithyline bag or Earthern pot. Including

organic & chemical fertilizer pesticides, fungicides hormones & maintaining the

plants uo to three months as deserted Crotons Variety.

210 Bowing and developing flowering plants grown in nusery having approximate 500.00 Nos. 20.20

height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature

colour planted in alump of soil packed in polithyline bag or Earthern pot. Including

organic & chemical fertilizer pesticides, fungicides hormones & maintaining the

plants uo to three months as deserted green mahindi.

211 Bowing and developing flowering plants grown in nusery having approximate 50.00 Nos. 45.45

height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature

colour planted in alump of soil packed in polithyline bag or Earthern pot. Including

organic & chemical fertilizer pesticides, fungicides hormones & maintaining the

plants uo to three months as deserted Varigated Ficus.

212 Bowing and developing flowering plants grown in nusery having approximate 50.00 Nos. 20.20

height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature

colour planted in alump of soil packed in polithyline bag or Earthern pot. Including

organic & chemical fertilizer pesticides, fungicides hormones & maintaining the

plants up to three months as deserted New block ficus.

213 Labour charges for planting various plants after proper anti termite treatment in pits 1050.00 Nos. 20.20

including placing property and filling the pit with requred prepared mix soil and

wetering and dispporting etc complete.

214 Maintenace of Lawn and flower bed and plants include loosening soil, regular 929.00 Sqmt 20.20

watering weeding,regular trimming/training, mowing of lawns twice a month with

all labor, tools and tackles etc. for a period of one Year.

215 Maintenance of Planted tree upto one year incl watering digging pilts rimming 1050.00 Nos. 151.50

applying fertilizer, insectiside, Pestiside and Pestisides and replacing plants if

necessary etc. complete for raising of plants weeding or soil working also incl

mainting water supply lines and drip lines of plantation (water and Electricity supply

216 Rubber Hose pipe 15 mm dia of approved brand and make. 80.00 Rmt 25.25

217 Providnig and fixing G I Nipple as directed. 20.00 Nos. 20.20

218 Supply, installation, testing &commissioning of ISI approved electrical motor driven 1.00 No. 98424.50

jockey pump set having 10.8 m3/hr. @ 70m head.The pump unit shall be a

horizontally direct mounted motor. Unit shall comprise the following minimum

requirements: a) Pump, b) Electric motor IE2, c) Foundation bolts, d) Mating

flanges with gasket and fasteners, e) Discharge gauges, etc.complete in all respect,

219 Supply, installation, testing &commissioning of Priming tank, HDPE type, 1000 1.00 No. 25674.20

litres, with necessary piping 100 mm size, G.I pipe for priming the pumps, pipe of

with butterfly valves for isolation, Water Filling to priming tank by piping min.

mm size, with all complete.

220 Supply, installation, testing &commissioning of Manifold (surge vessel) for fire 1.00 No. 55630.80

hydrant system, min.300 mm diameter,made from M.S plate,hydro tested to

kg./cm2. with ball valves,header with couplings for fitting pressure switches,

pressure gauges etc.with necessary isolation valves with all complete.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

221 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW 25.00 Mtr 393.90

piping,conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589

for size 200 mm dia. & above, thickness. G.I. pipe fittings as per IS: 1239, part-II,

Heavy class for size 150 mm dia. & below & IS: 3589 for size 200 mm dia. above,

flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers, etc. Hydrostatic

testing for 2 hours at 150% of the system pressure, hook-up etc. Painting for piping,

fittings & structural pipe support, shall be two coat of zinc primer and two coats of

fire red conf. to IS: 5, Shade 536. Complete with all accessories as per approved

drawings, specicification and direction of the Engineer-in-Charge, with all

complete. 25 mm dia.

222 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, 50.00 Mtr 636.30

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589, for size

200 mm dia. & above, thickness. G.I. pipe fitting's as per IS: 1239, part-II, Heavy

class for size 150 mm dia. & below & IS: 3589, for size 200 mm dia. above, flanges,

nuts bolts & washers, 3 mm thick gasket, pipe hangers, etc. Hydrostatic testing for

hour's at 150% of the system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support, shall be two coat of zinc

primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification and direction of the Engineer-

in-Charge, with all complete. 50 mm dia.

223 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, 65.00 Mtr 1171.60

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589, for size

200 mm dia. & above, thickness. G.I. pipe fitting's as per IS: 1239, part-II, Heavy

class for size 150 mm dia. & below & IS: 3589, for size 200 mm dia. above, flanges,

nuts bolts & washers, 3 mm thick gasket, pipe hangers, etc. Hydrostatic testing for

hour's at 150% of the system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support, shall be two coat of zinc

primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification and direction of the Engineer-

in-Charge with all complete. 80 mm dia.

224 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, 240.00 Mtr 1686.70

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589, for size

200 mm dia. & above thickness. G.I. pipe fitting's as per IS: 1239, part-II, Heavy

class for size 150 mm dia. & below & IS: 3589 for size 200 mm dia. above, flanges,

nuts bolts & washers, 3 mm thick gasket, pipe hangers, etc. Hydrostatic testing for

hour's at 150% of the system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support, shall be two coat of zinc

primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification and direction of the Engineer-

in-Charge, with all complete. 100 mm dia.

225 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, 15.00 Mtr 2525.00

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589, for size

200 mm dia. & above, thickness. G.I. pipe fitting's as per IS: 1239, part-II, Heavy

class for size 150 mm dia. & below & IS: 3589, for size 200 mm dia. above, flanges,

nuts bolts & washers, 3 mm thick gasket, pipe hangers, etc. Hydrostatic testing for

hour's at 150% of the system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support, shall be two coat of zinc

primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification and direction of the Engineer-

in-Charge, with all complete. 150 mm dia.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

226 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, 1.00 Mtr 3413.80

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589, for size

200 mm dia. & above, thickness. G.I. pipe fitting's as per IS: 1239, part-II, Heavy

class for size 150 mm dia. & below & IS: 3589, for size 200 mm dia. above, flanges,

nuts bolts & washers, 3 mm thick gasket, pipe hangers, etc.Hydrostatic testing for

hour's at 150% of the system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support, shall be two coat of zinc

primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification and direction of the Engineer-

in-Charge, with all complete.200 mm dia.

227 Supply, installtion, testing & commissioing of Underground GI (ERW) piping 15.00 Mtr 2020.00

conforming to IS:1239, part-I, Heavy class ('C' class) up to 150 mm dia and IS:3589

Heavy class ('C' class), for 200 mm dia. & above, min. 6.35mm thickness including

Heavy class fittings, anti-corrosive tape of size 150 mm wide x 4 mm thick,

wrapping & coating with 13KV holiday testing . Rates shall include sand bedding of

75mm dia all around, backfilling of the excavated including installation of heavy

pipe fitting's, flanges, etc. 10 % of all the welded joints shall be done

radiographically tested and 50% of the joints radiographed shall be the "Field

Joints". Hydrostatic testing for 2 hours at 150% of the system pressure, hook-up etc.,

complete with all accessories as per approved drawings, specicification and

direction of the Engineer-in-Charge, with all complete. (Road Crossing) 100 mm dia.

228 Supply, installtion, testing & commissioing of Underground GI (ERW) piping 10.00 Mtr 3040.10

conforming to IS:1239, part-I, Heavy class ('C' class) up to 150 mm dia. and IS:3589

Heavy class ('C' class), for 200 mm dia. & above, min. 6.35mm thickness including

Heavy class fittings, anti-corrosive tape of size 150 mm wide x 4 mm thick,

wrapping & coating with 13KV holiday testing . Rates shall include sand bedding of

75mm dia all around, backfilling of the excavated including installation of heavy

pipe fitting's, flanges, etc. 10 % of all the welded joints shall be done

radiographically tested and 50% of the joints radiographed shall be the "Field

Joints". Hydrostatic testing for 2 hours at 150% of the system pressure, hook-up etc.,

complete with all accessories as per approved drawings, specicification and

direction of the Engineer-in-Charge, with all complete. (Road Crossing) 150 mm dia.

229 Design, Supply and installation of Safety Signage made of Zinc Sulphilde based 7200.00 Sq. 9.09

glow in dark, Rigid sheet with High Luminous property enclosed in a transperent inch

weather proof UV stabilized plastic pasted on 3 mm thick clear acrylic sheet such as

EXITS, EMERGENCY EXIT, DO NOT USE LIFT DURING FIRE, FLOOR

MARKINGS, FIRE LIFT, STAIRCASE EXIT, FIRE ALARM CALL POINT,

FIRE HOSE REEL, FIRE HYDRANT POINT etc.

230 Supply, Installtion, Testing & Commissioing of Standard Response Sprinkler, 1.00 No. 555.50

Pendent Brass Sprinkler, Quartzoid Bulb type with crome finish, nickel crome

platde, K factor K-80, Temp.- 680C, 1/2" end connection including resessed

escutcheon. (UL Listed).

231 Supply, installation, testing & commissioning of pressure switch. (Range 0 to 16 3.00 Nos. 2817.90

232 Supply, installation, testing & commissioning of 150 mm dia. dial Burdon Type 6.00 Nos. 2737.10

Glycerine Filled pressure gauge with isolation ball valve arrangements with

necessary isolation valves with all complete. (Range 0 to 15 kg/cm2)

233 Supply, installation, testing & commissioning of Cast iron body double flanged gate 3.00 Nos. 5898.40

valve With Rising Spinldle conf. to IS: 14846, PN-1.6 with mating flanges, drilling

as per IS/ANSI 150# with mating flanges, galvanized nut, bolts & washers, gasket

mm thick, etc., with all complete. 50 mm dia.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

234 Supply, installation, testing & commissioning of Cast iron body double flanged gate 2.00 Nos. 8181.00

valve With Rising Spinldle conf. to IS: 14846, PN-1.6 with mating flanges, drilling

as per IS/ANSI 150# with mating flanges, galvanized nut, bolts & washers, gasket

3 mm thick, etc., with all complete. 80 mm dia.

235 Supply, installation, testing & commissioning of Cast iron body double flanged gate 2.00 Nos. 10261.60

valve With Rising Spinldle conf. to IS: 14846, PN-1.6 with mating flanges, drilling

as per IS/ANSI 150# with mating flanges, galvanized nut, bolts & washers, gasket

3 mm thick, etc., with all complete. 100 mm dia.

236 Supply, installation, testing & commissioning of Cast iron body double flanged gate 2.00 Nos. 15917.60

valve With Rising Spinldle conf. to IS: 14846, PN-1.6 with mating flanges, drilling

as per IS/ANSI 150# with mating flanges, galvanized nut, bolts & washers, gasket

3 mm thick, etc., with all complete. 150 mm dia.

237 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly valve 4.00 Nos. 2009.90

according to IS:13095, PN-1.6, Iron Disc for size 150 mm dia. & below Lever

operated and above 150 mm dia. Gear operated complete with mating flanges /ANSI

class # 150 with bolts & nuts washers, rubber gaskets 3 mm thick, etc., with all

complete. 50 mm dia.

238 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly valve 4.00 Nos. 2565.40

according to IS:13095, PN-1.6, Iron Disc for size 150 mm dia. & below Lever

operated and above 150 mm dia. Gear operated complete with mating flanges /ANSI

class # 150 with bolts & nuts washers, rubber gaskets 3 mm thick, etc., with all

complete. 80 mm dia.

239 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly valve 5.00 Nos. 3120.90

according to IS: 13095, PN-1.6, Iron Disc for size 150 mm dia. & below Lever

operated and above 150 mm dia. Gear operated complete with mating flanges /ANSI

class # 150 with bolts & nuts washers, rubber gaskets 3 mm thick, etc., with all

complete. 100 mm dia.

240 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly valve 1.00 No. 4484.40

according to IS: 13095, PN-1.6, Iron Disc for size 150 mm dia. & below Lever

operated and above 150 mm dia. Gear operated complete with mating flanges /ANSI

class # 150 with bolts & nuts washers, rubber gaskets 3 mm thick, etc., with all

complete. 150 mm dia.

241 Supply, installation, testing & commissioning of Cast iron body Dual Plate Wafer 2.00 Nos. 1535.20

Type NRV conf. to IS: 210, PN-1.6 complete with mating Flanges class # 150 with

bolts & nuts, washers, gaskets 3 mm thick, etc., with all complete Accessories

242 Supply, installation, testing & commissioning of Cast iron body Dual Plate Wafer 2.00 Nos. 2222.00

Type NRV conf. to IS: 210, PN-1.6 complete with mating Flanges class # 150 with

bolts & nuts, washers, gaskets 3 mm thick, etc., with all complete Accessories

243 Supply, installation, testing & commissioning of Cast iron body Dual Plate Wafer 2.00 Nos. 3161.30

Type NRV conf. to IS: 210, PN-1.6 complete with mating Flanges class # 150 with

bolts & nuts, washers, gaskets 3 mm thick, etc., with all complete Accessories

244 Supply, installation, testing & commissioning of Cast iron body Dual Plate Wafer 2.00 Nos. 5817.60

Type NRV conf. to IS: 210, PN-1.6 complete with mating Flanges class # 150 with

bolts & nuts, washers, gaskets 3 mm thick, etc., with all complete Accessories

245 Supply, installation, testing & commissioning of SG iron body SinglePlate Wafer 2.00 Nos. 1111.00

Type NRV conf. to ASTMA 536, PN-1.6 complete with mating Flanges class #

with bolts & nuts, washers, gaskets 3 mm thick, etc., with all complete. Accessories

246 Supply, installation, testing & commissioning of SG iron body SinglePlate Wafer 2.00 Nos. 1454.40

Type NRV conf. to ASTMA 536, PN-1.6 complete with mating Flanges class #

with bolts & nuts, washers, gaskets 3 mm thick, etc., with all complete. Accessories

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

247 Supply, installation, testing & commissioning of SG iron body SinglePlate Wafer 2.00 Nos. 1787.70

Type NRV conf. to ASTMA 536, PN-1.6 complete with mating Flanges class #

with bolts & nuts, washers, gaskets 3 mm thick, etc., with all complete. Accessories

248 Supply, installation, testing & commissioning of Y Type Strainer complete with 2.00 Nos. 5555.00

mating flanges with bolts & nuts, washers, gaskets 3 mm thick, etc., with all

complete accessories. 80 mm dia.

249 Supply, installation, testing & commissioning of Y Type Strainer complete with 2.00 Nos. 7272.00

mating flanges with bolts & nuts, washers, gaskets 3 mm thick, etc., with all

complete accessories. 100 mm dia.

250 Supply, installation, testing & commissioning of Y Type Strainer complete with 1.00 No. 11554.40

mating flanges with bolts & nuts, washers, gaskets 3 mm thick, etc., with all

complete accessories. 150 mm dia.

251 Supply, installing, testing and commissioning of Normax make CI heavy duty ball 1.00 No. 4191.50

type foot valve with flanges, nut bolts, gaskets etc. with necessary complete

accessories. 80 mm dia.

252 Supply, installing, testing and commissioning of Normax make CI heavy duty ball 2.00 Nos. 6161.00

type foot valve with flanges, nut bolts, gaskets etc. with necessary complete

accessories. 100 mm dia.

253 Supply, installing, testing and commissioning of Normax make CI heavy duty ball 1.00 No. 12402.80

type foot valve with flanges, nut bolts, gaskets etc. with necessary complete

accessories. 150 mm dia.

254 Supply, installation, testing & commissioning of Four way fire brigade Inlet 1.00 No. 8978.90

connection with 63 mm dia. stainless steel (SS304) instantaneous male inlets with

built in non return valve in each inlet with 150 mm dia. header pipe, suitable rubber

cap and GI chain including nuts, bolts, washers, gasket 3 mm thick, etc. with all

255 Supply, installation, testing & commissioning of Two way fire brigade Inlet 1.00 No. 5130.80

connection with 63 mm dia. stainless steel (SS304) instantaneous male inlets with

built in non return valve in each inlet with 100 mm dia. header pipe, suitable rubber

cap and GI chain including nuts, bolts, washers, gasket 3 mm thick, etc. with all

256 Supplying FIRE bucket round bottom of 9 liters capacity made out of 24 gauge G.I 8.00 Nos. 1020.10

Sheet with extra handle at bottom duly painted white inside and Red out side with

FIRE mark. Filled with dry-sand and kept on existing stand provided or hung on

257 Supplying and erecting floor mounting Stand for keeping four nos. of FIRE buckets 2.00 Nos. 5555.00

comprising 1500 mm in length, 900 mm height frame made out of 30mm x 30 mm x

4 mm angle iron with cross supports legs, welded with 4 hooks and duly painted

with one coat of primer and two coats of approved enamel P O red paint.

258 Supply & installation of stainless steel body Orifice Plate of suitable inner bore 8.00 Nos. 1060.50

along with matching flange - as per specification & requirement as per hydraulic

259 Providing and fixing approved make Perforated C type cable tray. Made from pre- 10.00 Mtr 471.67

galvanized sheet steel. The cable tray should be bended as per IS 2062/1079 with

max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut -

bolt and washers etc. erected on existing support as per Specification and as per

instruction of engineer in charge. (5) 300 X 50 X 1.5 mm Thick.

260 Providing and fixing approved make Perforated C type cable tray. Made from pre- 10.00 Mtr 322.19

galvanized sheet steel. The cable tray should be bended as per IS 2062/1079 with

max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut -

bolt and washers etc. erected on existing support as per Specification and as per

instruction of engineer in charge. (3) 150 X 50 X 1.5 mm Thick.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

261 Supply, installation, testing & commissioning of Oblique pattern type stainless steel 8.00 Nos. 5433.80

(SS 304) single headed External Fire Hydrant Valve with 63 mm dia. female

instantaneous outlet conf. to IS: 5290, type - A, including mating flanges,

galvanised nuts, galvanised bolts / studs, washers & gaskets 3 mm thick with all

Supply, installation, testing & commissioning of 63 mm dia. stainless steel (SS 304) 8.00 Nos. 1747.30

Universal Branch Pipe conf. to IS:

263 Supply & installation, testing & commissioing of Fire Fighting Hose - conf. to IS : 8.00 Nos. 6958.90

636, type B (type- 3), The fire hose shall be 15 m long with 63 mm dia. stainless

steel (SS 304) couplings conf. to IS: 903, at both the ends for connection with the

hydrant valve and the branch pipe.

264 Supply, installation, testing & commissioning of fabricated from 3 mm MS sheet, 8.00 Nos. 2525.00

hose box of size-450 mm x 600 mm x 250 mm - painted with Fire Red as per IS:

shade no. 536 front 3 mm thick transparent glass with lock & key, handle and brass

hinges - to accommodate one number of 15 mtr long hose and one number of

universal branch pipe, including supporting arrangement with civil work.

265 Supply, Installation, testing & commissioing of Swinging type mild steel hose reel 8.00 Nos. 7403.30

drum with 20 mm dia. x 30 mtr. rubber hose as per IS: 884. The mounting stand

shall be of mild steel and the hose shall be fitted with a SS shut-off nozzle & SS ball

valve of 25 mm dia. including supporting arrangement with all complete.

266 Supplying, fixing & testing of of CI ball Valve 25mm dia. (Thread). 16.00 Nos. 696.90

267 Supplying, fixing & testing of New Battery of diesel engine 150 Amp. 1.00 No. 15826.70

268 Supply and installation of Diesel Tank For Diesel Engine With All Accessories 100 1.00 No. 16685.20

269 Supplying, filling & testing lube oil for diesel engine. 15.00 Ltrs 313.10

270 Supply and commissioning of Oil Filter. 1.00 No. 696.90

271 Supplying, filling of diesel in diesel engine tank. 80.00 Ltrs 89.89

272 Supply and commissioning of Diesel Filter. 1.00 No 429.25

273 Supplying, filling & testing coolant to engine cooling for radiator. 20.00 Ltrs 240.38

274 Filling Of Gaps Between pipe and Core Cutting Hole With Chemical and Cement 30.00 Nos. 298.96

275 Supplying & erecting XLPE (IS:7098) (I)-88 ISI unarmoured copper cable 1.1 KV 30.00 Mtr 136.35

grade to be erected as directed of following size. (E) 3 core 2.5 Sq. mm for pressure

276 Providing and erecting XLPE(IS:7098) (I)-88 ISI armoured cable multistrand 30.00 Mtr 285.83

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of following size of cable. (Only Fire

Panel to Fire Pump) (B) 3 core 4 Sq. mm.

277 Providing and erecting XLPE(IS:7098) (I)-88 ISI armoured cable multistrand 30.00 Mtr 497.93

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of following size of cable. (Only Fire

Panel to Fire Pump) (D) 3 core 10 Sq. mm (Only Fire Panel to Fire Pump)

278 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable multistrand 30.00 Mtr 213.11

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of following size of cable for Diesel

Engine Battery Charger (A) 3 core 2.5Sq. mm.

279 Supply, Filling and Fixing of approved make ABC type fire extinguisher - 6 Kg. 12.00 Nos. 1959.40

Capacity as per IS:15683 & IS :

280 Supply, Filling and Fixing of approved make CO2 type fire extinguisher. 12.00 Nos. 5514.60

Capacity 4.5 Kg. (conforming to IS-15683).

281 Supply, Filling and Fixing of approved make ABC Moduler type automatic fire 3.00 Nos. 3413.80

extinguisher. Capacity 5 Kg. (conforming to IS-15683).

282 Submitting the application to obtain Fire Plan Approval and After Completion of 1.00 No. 101000.00

Work Obtain Final Fire NOC for 3 Year.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

283 Supply, Installation and commissioning of Air Release Valve, 25 mm Dia. 3.00 Nos. 1403.90

284 Supply, Installation and commissioning of Fire Alarm Panel Conventional type, 4 1.00 No. 21391.80

zone, with complete accessories.

285 Supply, Installation and commissioning of smoke detectors / heat detectors, with 10.00 Nos. 1020.10

complete accessories.

286 Supply, Installation and commissioning of plug in base for the smoke detectors, 10.00 Nos. 252.50

hooters, with complete accessories.

287 Supply, Installation and commissioning of Audio hooters with complete accessories. 9.00 Nos. 1060.50

288 Supply, Installation and commissioning of Manual Call Points with complete 9.00 Nos. 1010.00

289 Providing and erecting XLPE(IS:7098) (I)-88 ISI armoured cable multistrand 750.00 Mtr 176.75

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (A) 2 core 2.5 Sq. mm for Fire

290 Core cutting in wall and in RCC slab with size as below: 50 mm dia. Hole. 15.00 Nos. 333.30

291 Core cutting in wall and in RCC slab with size as below: 80 mm dia. Hole. 5.00 Nos. 424.20

292 Core cutting in wall and in RCC slab with size as below: 100 mm dia. Hole. 3.00 Nos. 505.00

293 Core cutting in wall and in RCC slab with size as below: 150 mm dia. Hole. 5.00 Nos. 595.90

294 Core cutting in wall and in RCC slab with size as below: 200 mm dia. 2.00 Nos. 848.40

295 Supply, installation, testing & commissioning of ISI approved electrical motor 1.00 Set 162610.00

operated Kirloskar make fire hydrant main pump set horizontal end suction back

pull out top discharge centrifugal fire pump set with all the standard acessories, base

frame, coupling, and foundation bolts with following specifications Model -DB

65/26, Flow-96 m3/hr, Head-70 meter, Motor Rating -37KW/40HP/3 ph, Suc x

296 Supplying, Installation, Testing and commissioning of Kirloskar make diesel engine 1.00 Set 382002.20

driven fire hydrant pump set suitable for automatic operation and consisting of

following: horizontal type, centrifugal end suction back pull out, top discharge

pump of cast iron body & bronze impeller with m.s.fabricated common base plate,

coupling, coupling guard, foundation bolts etc.,as required. Model -KFE Flow-96

m3/hr,Head-70 meter, Engine - 50 HP / 3 ph Suc x Del - 100 x

297 Fire Hydrant Panel suitable for 10 hp Jockey pump, 40 hp (96 m3/hr @ 70 m head) 1.00 No. 101000.00

main electrical pump and 50 hp (96 m3/hr @ 70 m head) Diesel engine operated

pump A) Incomer MCCB - 1 Nos R Y B Indication - 1 Set VAF Digital Meter -

Set B) Outgoing F1 40 HP Star Delta Starter - 1 For Main pump F2 10 HP DOL

Starter - 1 For Jockey Pump F3 Auto - On / Off Diesel Pump With Battery Charger

Control Circuit With Auto - Manual On/Off On/Off Trip Indication On/Off Push

Button C) Fabrication Dully Powder Coated PO Red Colour, Fabricated From 14/16

SWG, GI Sheet, IP-42 Protection, Fixed Type Floor Mounted Cable Entry : Bottom.

298 Pay Legal Fees to Concern Authority for Obtaining Plan Approval and Final NOC. 3000.00 Sq.mt 10.10

299 Providing & fixing Library Table of size 1.75 x 0.90 x 0.75m (H) using 19 mm thick 48.00 Sqmt 4560.15

allproof plywood of BWR confirming to IS 710 of green or century make, designs &

grooves as directed by architectural drawings, lamination of 1.0 mm thick in single

or double shade of green, broom or equivalent make of plain or texture finish

including necessary khili make adhesive etc. of suggested brand by engineer-in-

charge teakwood foot rest of size or size as directed, necessary teakwood beading

of Indian teakwood including all cost of material, labours 1 mm lamination in single

or double shade & colour as directed on all visible face and 0.80 mm white

lamination on all non visible faces as directed by engineer-in-charge etc. complete.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

300 Reading or Visitor Chair with P type handle, Non revolving oval shape with metal 319.00 Nos. 2323.00

steel powder quoted chair. Overall size: W-70 x D-70 x H-113-123 (cm)

Chairs are tested by approved Laboratories & Certified by International Agency

BIFMA confirming to ANSI/BIFMA X 5.1- 2002 on functional requirement.

301 Providing and Placing Library Storage cabinet including following : Glass Door 10.00 Nos. 19745.50

cabinet with 4 adjustable shelves, 2 door with 4 glass panels and lock, S.S.keys in

duplicate. All steel parts of the cabinet will be (20/22 swg.) CRCA IS 513 'D' grade

10 tanks antirust treated Standard powder coating in in-house plant. Overall size: H-

1980 x W-915 x D- 485 (mm) as per directed by engineer in charge.

302 Supplying and fixing Notice board made from teak wood size of board is 1.95 x 0.90 5.00 Nos. 3487.53

x 0.05 with 3mm plain glass door including thermocole coated inner side with velvet

cloth upper side also including backside 9mm thick allproof ply and polishing

including necessary handles locking arrangment as directed by engineer-in-charge.

303 Providing and Placing Indian Teakwood Paper Rack with 2 Steps Horizontal & 1.00 No. 3403.70

Vertical Support are complete with Polishing & Moulding for corrosion resistant for

a longer life. Size: (L) 75 cm x (B) 60 cm x (H) 75 cm. All works shall be carried

out as per directed by engineer in charge. Minimum section of Rack for (i) Vertical

50mm x 50mm (ii) Horizontal long side 50mm x 50mm (iii) Horizontal short side

50mm x 50mm (iv) Horizontal shelf 30mm x 25mm.

304 Providing and fixing single bed size 0.90 x 1.90 mt using Side of bed size 35 cm 139.00 Nos. 13299.68

with double 19mm thick plywood all proof, 19 mm thick plywood bottom and 12mm

thick plywood Top surface & back of size 0.9 mt x 0.60 mt all proof of good quality

including fixing 1mm thick lamination sheet on all Visible surface and 0.8 mm

Thick Lamination Sheet on hidden surface on plywood with fixing teakwood

bedding including nails, fevicol, Handel, Hinges, polishing including labour etc as

directed by Eng. in charge complete.

305 Supplying Mattresses of size 1.80 mt x 0.79 mt using springwel Magic, Sleepwell, 139.00 Nos. 5581.26

Curlon or equivalent quality foam of 40 density and 4" thick including madarpat

cover, 150Gsm Cotton quilt covering Mattress & Pillow size - 0.69 mt x 0.45 mt

with features like Non-allergic microfibre polyfill pillow & minimum 660Gsm and

print Department logo on all things as approved and suggested by engineer-in-

charge etc. Complete.

306 Supplying Single Bed Chadar or Bed Sheet of size 1.40 mt x 2.40 mt & pillow cover 139.00 Nos. 755.48

size 0.45 mt x 0.69 mt Bombay Dyeing Cardinal or its equivalent quality and print

Department logo on all things as suggested and approved by engineer-in-charge etc.

307 Supplying all weather cotton rajai/ blanket of size 1.40 mt x 2.40 mt of Bombay 141.00 Nos. 813.05

Dyeing or its equivalent quality and print Department logo on all things as

suggested and directed by engineer-in-charge etc. complete.

308 Provinding & Supplying of SS Dining Table size : L 1.8 mt x W 0.90 mt With Stool 14.00 Nos. 22068.50

and Product is made up of good quality. This Canteen Dining Table boasts of

everlasting shine, wonderful appearance and is perfectly applicable for dining.

Features:-• High durability • Long life • Outstanding quality • Number Of Seater

Seater • Frame Material Stainless Steel • Surface Finish SS Finish • Set Contains

With Stools • Shape Rectangular • Color Silver • Usage/Application Canteen, Mess

• Design Type Customized as approved or directed by the authority and approved by

the Engineer in charge.

309 Provinding & Supplying of SS Dining Table size : L 1.50 mt x W 0.90 mt With 10.00 Nos. 16841.75

Stool and Product is made up of good quality. This Canteen Dining Table boasts of

everlasting shine, wonderful appearance and is perfectly applicable for dining.

Features:-• High durability • Long life • Outstanding quality • Number Of Seater

Seater • Frame Material Stainless Steel • Surface Finish SS Finish • Set Contains

With Stools • Shape Rectangular • Color Silver • Usage/Application Canteen, Mess

• Design Type Customized as approved or directed by the authority and approved by

the Engineer in charge.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

310 Providing and fixing double bed size 1.90 mt x 1.90 mt using Side of bed size 35cm 1.00 No. 21228.18

with double 19mm thick plywood all proof, 19 mm thick plywood bottom and 12mm

thick plywood Top surface & back of size 1.90 mt x 0.60 mt all proof of good

quality including fixing 1mm thick lamination sheet on all Visible surface and

mm Thick Lamination Sheet on hidden surface on plywood with fixing teakwood

bedding including nails, fevicol, Handle, Hinges, polishing including labour etc as

directed by Engg. charge complete.

311 Providing and Placing Three seated sofa of size 1605 x 760 x 840 mm. The 1.00 No. 17422.50

structure of sofa shall be made from teak wood framing and 9 mm thick waterproof

plywood finishing as per design, including upholstered with 150 mm thick

density U-foam for seat and 100 mm thick 40 density U-foam for backrest and

covering both with best quality tapestry of approved colour and design side handle

with teakwood of approved design and exposed surface shall be polished with

melamine finishing to the wooden work etc.as directed by engineer-in-charge etc.

312 Providing and Placing two seated sofa of size 1300 x 760 x 840mm. The structure of 12.00 Nos. 14518.75

sofa shall be made from teak wood framing and 9mm thick waterproof plywood

finishing as per design, including upholstered with 150mm thick 40 density U-foam

for seat and 100mm thick 40 density U-foam for backrest and covering both with

best quality tapestry of approved colour and design side handle with teakwood of

approved design and exposed surface shall be polished with melamine finishing to

the wooden work etc. complete as per drawing.

313 Providing and fixing Tepoy (Centre and Corner Table) of size up to 0.90 m x 0.60 m 3.00 Sqmt 6250.89

x 0.45 m and top 12mm toughened glass of size up to 0.85 m x 0.55 m with teak

wood legs, side &shaport including all faces polishing work as directed by engineer-

in-charge. Minimum section of tepoy for (i) leg 50mm x 50mm (ii) Horizontal long

side 50mm x 50mm (iii) Horizontal short side 50mm x 50mm (iv) Horizontal

bottom support 30mm x 25mm.

314 Providing & fixing Fix side box for bed side 0.76 x 0.45 x 0.45m with two drawers 2.00 Nos. 4480.36

using 19mm thick plywood all proof with using 1mm thick lamination sheet heavy

quality channels including all labour as directed etc. complete.

315 Providing and Placing Steel Cupboard with following : 1. Dimension: Overall size of 10.00 Nos. 10453.50

Almirah • Height: 1980 mm • Width: 916 mm • Depth: 486 mm 2. Construction & Material:

• CRCA Sheet for shelf & anodized screws. • Welded construction. • 0.8 thickness High

yield strength CRCA for doors and back. • 0.9 thickness for all other components. • CRCA

‘D’ grade as per IS:513 3. Locking & Handle: • Three way locking mechanism with

shooting bolt. 4. Shelving : • Height wise adjustable shelf mounting. • Maximum uniformly

distributed load capacity per each full shelf is at least 80kg. • 4 Nos. of adjustable shelf

mounting. 5. Finish: • Epoxy powder coated to the thickness of 40-60 microns after 10 dip

tank pre treatment, including anti rust treatment. • All Dents, Burns and Sharp edges will be

removed from the various components. • The components will be individually pickled,

scrubbed and rinsed to remove grease, rust scale or any other foreign element. • The finish

will be smooth and uniform. The finish will be free from all visible defects. • All the edges

will be rounded. • All Almirah will be supply in Prince Grey Color.

as per directed by the Enginneer-in-Charge.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

316 Providing and placing Open type Storage Rack with following : Size: 2130 (H) X 15.00 Nos. 4646.00

1080 (W) X 380 (D) mm 1. Rack with 5 Compartments of 6 nos. of shelves.

Distance between each shelf will be 410 mm. These 6 shelves will be hanging

arrangement (adjustable). 2. Racks will be manufactured from Slotted M.S angle

mm thk. 3. Shelves will be manufactured from 0.9 mm thick sheet. 4. The rack will

be assembled with G I bolt, nuts and washers. 5. Slotted angle and M.S sheet will be

made of cold rolled with 10 tanks anti-rust treated and will be finished with powder

coating. .(Colour prince Grey) or as directed 6. H/D Rubber bushes will be provided

to the bottom of legs of slotted angle racks. 7. The quality of M.S sheet which is

used for racks will be free from any defects, Undulations, and old paints and surface

corrosion, etc. as directed by Engineer in chargeetc. complete.

317 Providing & fixing Study Table Size 1.05 x 0.60 x 0.75m made of 19 mm thick 83.00 Sqmt 10025.26

allproof plywood of BWR confirming to IS 710 of green or century make, designs &

grooves as directed by architectural drawings. Lamination of 1.0 mm thick in single

or double shade of green, broom or equivalent make of plain or texture finish as

directed on all visible face including on teak wood batten patti and 0.80 mm white

lamination on all non visible faces with all side decorative border upto 100 mm

thick for good appereance. All should be complete with teakwood support & legs

including nails, fevicol, polishing on hidden surface including labour etc as directed

by Engineer in charge complete.

318 Supplying Matresses of size 1.95 mt x 1.95 mt using springwel Magic, Sleepwell, 1.00 No. 8595.10

Curlon or equivalent quality foam of 40 density and 4" thick including madarpat

cover & Pillow and print Department logo on all things as approved and suggested

by engineer-in-charge etc. complete.

319 Supplying Double Bed Chadar or Bed sheet of size 2.40 mt x 2.40 mt & two Pillow 1.00 No. 1452.38

cover size 0.45 mt x 0.69 mt Bombay Dyeing Cardinal or its equivalent quality and

print Department logo on all things as suggested and approved by engineer-in-

charge etc. complete.

320 Providing and fixing as per approved make Roman curtain as suggested fabric . 281.00 Sqmt 4065.25

Fabric with manual operation and warranty etc as per manufacturer’s specifications.

Fabric to be as per approved sample. All the work complete as per the detailed

drawing and instruction of Architect/Client. (Contractor shall provide treated

conceal channel complete in all respects on which all curtains shall be fixed and

should also take load of all the manual curtains). All complete as per approval of

designer & instruction of PMC.Work completed as per the detailed drawing and

instruction of Architect/Client. Height will be measured from top of the conceal

channel to floorm top/sill bottom lvl and clear opening size only there will be not

extra payment towared overlaping.

321 Providing & fixing Office table size 1.80x0.90x.0.75 m. made of 19 mm thick 1.00 No. 16959.92

allproof plywood including three drawers and one cabinet inclduing 1 mm

lamination in single or double shade & colour as directed on all visible face and

0.80 mm white lamination on all non visible faces Hettich make telescopic sliding

channel, Enox make S.S. sliding rail, S.S. Decorative handle, Ebco make Keyboard

tray with necessary fixtures & fasteners of standard make as per detail drawing and

image also including all labours as approved by engineer-in-charge etc. complete.

322 Three seated Visitor chair Gang Seater: Provinding & supplying of Gang seater 5.00 Nos. 7898.20

(three seater) made out totally of s.s pipe / sheets as approved or directed by the

architect and approved by the Engineer in charge.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

323 Providing & fixing Wooden cupboard size of 0.90x 2.10m and depth 0.45mt using 2.00 Sqmt 9665.70

12mm thick plywood all proof on back side both side top bottom and shelves are of

19mm thick ply & shutters are of 25mm thick ply all proof with teakwood batten &

1 mm lamination in single or double shade & colour as directed on all visible face

and 0.80 mm white lamination on all non visible faces including SS fixtures &

fastening,Godrej lock etc. good quality as directed by engineer-in-charge etc.

324 Chair for HOD executive chair with P type handle, tilting & revolving, Seat Height 1.00 No. 13938.00

adjustable by pneumatic gas lift, Chromium plate base.Overall size: W-70 x D-70 x

H-113-123 (cm) Our chairs are tested by approved Laboratories & Certified by

International Agency BIFMA confirming to ANSI/BIFMA X 5.1- 2002 Cl. No.

5,7,8,12,13,17 on functional requirement.

325 Providing & fixing Dining table size 1.20 x 1.20 x 0.75m made of 19 mm thick 1.00 No. 8815.28

allproof plywood of BWR confirming to IS 710 of green or century make, designs &

grooves as directed by architectural drawings. lamination of 1.0 mm thick in single

or double shade of green, broom or equivalent make of plain or texture finish as

directed on all visible face including on teak wood batten patti and 0.80 mm white

lamination on all non visible faces with all side decorative border upto 50mm thick

for good appereance including teakwood support & legs including nails, fevicol,

polishing on hidden surface including labour etc as directed by Engg. in charge

326 Commercial Roti Maker Machine Description : The Fully Automatic Roti Maker 1.00 No. 87112.50

Machine is easy to use design which can be operated with a minimum training by an

unskilled worker. A fellow worker can be very easily instructed also to use the

machine. We offer a wide range of fully automatic Roti Maker Machine as a reliable

company. This device integrates in the most hygienically and functionally possible

way, the whole process of peda-making, pressing and baking in one unit. The cost of

manufacturing, waste of raw materials and process time are reduced

considerably.Remove the probability of infestations ofinsects that can occur in

completely covered machines. Minimizing immediate human meal &chapatis

contact. This guarantees that the chapatis and machine surfaces do not contain any

germs. The Fully Automatic Chapati Making Machine is easy to use design which

can be operated with a minimum training by an unskilled worker. A fellow worker

can be very easily instructed also to use the machine. Features : The most recent

technology which is our own invention is provided in our fully automatic machine. It

is unique and cannot be designed completely automatically with any other maker.No

dry flour sprinkler is required for our fully automated machine, which prevents

wastage of drying meal. This facilitates the cleaning and maintenance of the whole

scheme. Specifications : Product Type : Roti Maker Machine Brand : Made In India

Production Capacity : 800 to 1000 chapati per hr Chapati Diameter : 3 to 9 Inch

Chapati Thickness : 0.8 to 6 mm Power Consumption : 4 unit per hr Voltage : 220 V

Phase : Single Frequency : 50 HZ Dimension (L x W x H) : 29 x 22 x 24 inch

Weight : 95 Kg (Approx) Toolsvilla deals with various types of Food Processing

Machinery. Wide ranges of Chapati Making Machine help make home-like chapatis

most hygienically.

327 Providing and Supplying 25 Kg Flour Mixing (Atta Maker) Machine of Verai 1.00 No. 47621.50

company with Guarantee and Warranty Card as per following specification. SKU:

MAC.AAT.107825951 Country of Origin: India Weight: 135 Kg Capacity: 25 Kg

Name of Manufacturer/Packer/Importer: Verai Industries Type of Product: Flour

Mixing Machine Operation Mode: Semi Automatic Color: Blue Size: 48 x 42 x

Motor (hp): 1 HP Rotational Speed: 1440 RPM Rust Proof: Yes Corrosion

Resistance: Yes Duration: 18-22 Min etc. completed.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

328 Providing and Supplying Commercial Gas Stove (Chulah/Bhattha Stove ) (Large 3.00 Nos. 23230.00

Burner Gas Stove Single 18 " x 18 ") with Guarantee and Warranty Card as per

following specification. Colour - BLUE/Black Material - Cast Iron Special Feature -

Gas Heating Elements - 1 Product Dimensions - 45D x 45W x 25H Centimeters

Controls Type - Knob Burner type - Open etc. complete

329 Deep freezer Color White,Temperature Range 6 TO -23 Type of Freezer chest type 1.00 No. 52267.50

Door Type Top Open Door Capacity 523L Model Number GFR-550UC Energy

Consumption 189W Refrigerant used R-134 Number Of Basket 2 Compressor Type

RECIP. Phase single phaseVoltage 190 v to 250v Volume 523 ltrs. Body Material

Pre painted GPSP Sheet Power source Electric Size LargeType Top Open Hold

Over Time 8-12 hr Lock yes I Deal In New Only Puf Thickness 90 mm Castor

Wheels yes PUF insulated 90 MM Stabilizer Required YES Dimensions: 850(W) X

735(D) X 900(H)mm Temperature: -18 to -23C

Insulation :- 90 mm high density PUF CFC Free Refrigerant: R-134a Current watts:

189 W No.of baskets :2 nos. No.of doors :- 2 nos.High energy efficiency

compressor Super tropicalised to perform in extreme temperatures 10 Years

warranty on body (Internal Leakage) 5 years warranty on compressor.

330 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) 602.00 Pt. 485.81

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length , in below type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose / H.D. Connector as directed. (f)

with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III (Wire :-KEI/ RR Kabel/Havells/Apar Pipe :-

Vraj/Nihir/Anchor/Precision/Polycab Accesorries:- Panasonic /

Havells/Honeywell/L&T/ Greatwhite)

331 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are 254.00 Pt. 674.68

of ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to

10 mtr length, in below type of pipe erected with 6A Modular type switch and hum

free EME step type electronic fan regulator mounted and accessories with earth

continuity of following type erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III (Wire :-KEI/ RR

Kabel/Havells/Apar Pipe :- Vraj/Nihir/Anchor/Precision/Polycab Accesorries:-

Panasonic / Havells/Honeywell/L&T/ Greatwhite).

332 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket 168.00 Pt. 257.55

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate modules erected on / in wall / ceiling with

following type accessories Cat. III (Accesorries:- Panasonic /

Havells/Honeywell/L&T/ Greatwhite)

333 Providing following type of Modular Type Accessories mounted with PVC / 189.00 Nos. 151.50

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per site

situation directed by Engineer In charge. (1) One No. SP 6 Amp. Cat.III

(Accesorries:- Panasonic / Havells/Honeywell/L&T/ Greatwhite)

334 Providing following type of Modular Type Accessories mounted with PVC / 189.00 Nos. 151.50

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate, modules erected with necessary connections as per site

situation directed by Engineer In charge. (2) One No 5 pin plug Cat.III

(Accesorries:- Panasonic / Havells/Honeywell/L&T/ Greatwhite)

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

335 Providing following type of Modular Type Accessories mounted with PVC / 6.00 Nos. 210.08

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate, modules erected with necessary connections as per site

situation directed by Engineer In charge. (3) Two Pin/RJ-11 Telephone Socket [B]

For Two Gang Cat.III (Accesorries:- Panasonic / Havells/Honeywell/L&T/

336 Providing following type of Modular Type Accessories mounted with PVC / 5.00 Nos. 160.59

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate, modules erected with necessary connections as per site

situation directed by Engineer In charge.(4) TV Co-axial Socket outlet Cat.III

(Accesorries:- Panasonic / Havells/Honeywell/L&T/ Greatwhite)

337 Providing following type of Modular Type Accessories mounted with PVC / 12.00 Nos. 160.59

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per site

situation directed by Engineer In charge. (8) Computer RJ-45 socket Cat.III

(Accesorries:- Panasonic / Havells/Honeywell/L&T/ Greatwhite)

338 Providing following type of Modular Type Accessories mounted with PVC / 112.00 Nos. 180.79

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per site

situation directed by Engineer In charge. (9) 16 Amp. SP one way switch Cat.III

(Accesorries:- Panasonic / Havells/Honeywell/L&T/ Greatwhite)

339 Providing following type of Modular Type Accessories mounted with PVC / 112.00 Nos. 199.98

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per site

situation directed by Engineer In charge. (10) 6/16Amp. Universal socket Cat.III

(Accesorries:- Panasonic / Havells/Honeywell/L&T/ Greatwhite)

340 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size 2519.00 Mtr. 24.24

complete to be erected on/in wall or ceiling erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes,

in approved manner as directed (a) 20 mm (Wire :-KEI/ RR Kabel/Havells/Apar

Pipe :- Vraj/Nihir/Anchor/Precision/Polycab)

341 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 7854.00 Mtr. 82.82

stranded Copper conductor wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (A) With

medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm (Wire :-KEI/

RR Kabel/Havells/Apar)

342 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 3050.00 Mtr. 112.11

stranded Copper conductor wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size (A) with medium class Rigid

PVC pipe and accessories(a) 2 wire 4 sq. mm (Wire :-KEI/ RR Kabel/Havells/Apar)

343 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 120.00 Mtr. 147.46

stranded Copper conductor wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size (A) with medium class Rigid

PVC pipe and accessories(b) 2 wire 6 sq. mm (Wire :-KEI/ RR Kabel/Havells/Apar)

344 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 1380.00 Mtr. 260.58

stranded Copper conductor wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size (A) with medium class Rigid

PVC pipe and accessories(h) 4 wire 6 sq. mm (Wire :-KEI/ RR Kabel/Havells/Apar)

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

345 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi 39.00 Mtr. 56.56

stranded, annealed copper conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control wiring) with required size

of copper lugs, nuts and bolts if required. (e) One wire 6.00 sq. mm.

346 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi 33.00 Mtr. 91.91

stranded, annealed copper conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control wiring) with required size

of copper lugs, nuts and bolts if required. (f) One wire 10.00 sq. mm.

347 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi 30.00 Mtr. 142.41

stranded, annealed copper conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control wiring) with required size

of copper lugs, nuts and bolts if required.(g) One wire 16.00 sq. mm

348 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi 6.00 Mtr. 300.98

stranded, annealed copper conductor with heat resistant PVC insulated conforms to

IS 694, IEC - 227 erected in existing pipe of following size (Specifically for control

panel, relays, power switchgears, motor starters & control wiring) with required size

of copper lugs, nuts and bolts if required.(i) One wire 35.00 sq. mm.

349 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade 48.00 Mtr. 46.46

ISI marked copper wires of following size to be erected as directed. (e) 1.50 Sq.mm

3 core round PVC sheathed (Wire :-KEI/ RR Kabel/Havells/Apar)

350 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade 1890.00 Mtr. 56.56

ISI marked copper wires of following size to be erected as directed.(g) 2.50 Sq.mm

2 core round PVC sheathed (Wire :-KEI/ RR Kabel/Havells/Apar)

351 Providing & Erecting approved make following size of TV Co-axial flexible cable 89.00 Mtr. 39.39

comprising inner conductor of solid bare copper insulated with Foam PE &

Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable

coverage overall sheathed with black PVC insulation. (b) RG-6 (Wire :-KEI/ RR

Kabel/Havells/Apar)

352 Supplying & erecting approved make Telephone Cable electrolytic copper 180.00 Mtr. 20.20

conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape &

sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring &

confirming to C-DOT erected in existing pipe. of following size of conductors &

nos.of pairs. With necessary connections. [A] Conductor Size 0.5 mm (2) Two Pairs

(Wire :-KEI/ RR Kabel/Havells/Apar)

353 Supplying & erecting approved make Telephone Cable electrolytic copper 20.00 Mtr. 65.65

conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape &

sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring &

confirming to C-DOT erected in existing pipe of following size of conductors &

nos. of pairs. With necessary connections. [A] Conductor Size 0.5 mm (5) Ten Pairs

(Wire :-KEI/ RR Kabel/Havells/Apar)

354 Supplying & erecting approved make LAN cable of following size in existing pipe 360.00 Mtr. 47.47

as per direction [C] CAT -

355 Providing & erecting main Distribution (MDF) indoor type, back mounted frame as 1.00 No. 994.85

per DoT standard approved with krone strips (a) Suitable for 10 pair.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

356 Providing & erecting Switch board for Computer or electric apparatus consisting of 10.00 Nos. 1133.22

following modular type accessories mounted with PVC / Metallic concealed/open

box with single mounting base frame covered with textured/metallic /white front

plate,modules erected with necessary connections as directed 1 no. 6A/16A

universal plug-switch combined.

3 nos. 6A Switch 3 nos. 6A 5 pin Plug For Modular Type Accessories

Cat. III (Accesorries:- Panasonic / Havells/Honeywell/L&T/ Greatwhite)

357 Decorative call bell Ting-tong box type 250 volts complete erected. 4.00 Nos. 71.71

358 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 125.00 Nos. 373.70

Watt assembled on single MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%, CCT

K to 6500K, Luminaire efficacy> 85 lumens/watt, LED driver efficiency > 85 %

(fitting required LM-79 & LM-80 Certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A) Tube Light with

integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-III

(Make :- Philips/Havells/Wipro/Jaquar/Pyrotech)

359 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 285.00 Nos. 535.30

Watt assembled on single MCPCB with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%, CCT

K to 6500K, Luminaire efficacy> 85 lumens/watt, LED driver efficiency > 85 %

(fitting required LM-79 & LM-80 Certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A) Tube Light with

integral driver(v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet Cat-III

(Make :- Philips/Havells/Wipro/Jaquar/Pyrotech)

360 Supplying and erecting led lamps with following wattage capacity of 220 to 240 131.00 Nos. 112.11

voltage, minimum 15000 burning hours life, 500 V in built-surge protection,

Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >=

0.5 (A) LED Lamps integral type with PC diffuser suitable LAMP holder (ii) 5 to

watts Cat-III (Make :- Philips/Havells/Wipro/Jaquar/Pyrotech).

361 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 4.00 Nos. 758.51

Watt assembled on single MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to 270V,Power Factor more

than 0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt, LED driver efficiency > 85 % (fitting required LM-79 & LM-80

Certificates) (NOTE: Below description have shown ranges of Wattage capacity of

LED fittings. The Engineer incharge may select any wattage capacity between the

ranges shown.) (A) Square/ Circular shaped Surface/Recessed Mount Downlight

with provision for spring loaded mounting clips complete.IP20 (iv) 22-24 watts,

Surge-2 KV (Make :- Philips/Havells/Wipro/Jaquar/Pyrotech).

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

362 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 9.00 Nos. 1794.77

Watt assembled on single MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast

powder coated and high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt, LED driver efficiency > 85% (fitting required LM-79 & LM-80

Certificates) (NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.) (B) LED Panel Light with provision for Plane front frame with

translucent cover fixed to housing complete. IP20 (vi) 36 watts, 24" x 24", Surge-

2KV (Make :- Philips/Havells/Wipro/Jaquar/Pyrotech)

363 Supplying and erecting LED street light / Flood light fittings with High power White 12.00 Nos. 5976.17

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K, Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt. LED driver efficiency > 85 %. (fittings required LM-79 & LM-80

certificates) (NOTE: Below description have shown ranges of Wattage capacity of

LED fittings. The Engineer incharge may select any wattage capacity between the

ranges shown.) (A) Street Light (IP-65), Surge protection -4KV integral and Light

must have 440VAC line supply with over-voltage protection. (iii) Above 60 to

watts Cat-III (Make :- Philips/Havells/ Wipro/Jaquar/Pyrotech)

364 Supplying and erecting LED street light / Flood light fittings with High power White 8.00 Nos. 10818.11

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt LED driver efficiency > 85 %. (fittings required LM-79 & LM-80

certificates) (NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.) (B) Flood Light (IP-65), Surge protection -4KV integral and Light

must have 440VAC line supply with over-voltage protection. Cat-III (Make :-

Philips/Havells/Wipro/Jaquar/Pyrotech)

365 Supplying and erecting LED street light / Flood light fittings with High power White 14.00 Nos. 4819.72

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more

than 130 lm/w and corrosion free High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates) (NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.) (C) Post Top Lantern LED fitting comprises of finish cast aluminum

spigot and spun aluminum canopy fixed with opal polycarbonate, pipe arrangement

for vertical mounting driver and accessories wired upto terminal block.IP 65 (ii)32-

40W Cat-lll (Make :- Philips/Havells/Wipro/Jaquar/Pyrotech)

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

366 Providing and erecting Approved make Four pole moulded case circuit breaker 6.00 Nos. 6173.12

having breaking capacity ICU of 25 KA at 415 V,having normal current rating up to

25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C.

supply 50 c/s. with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III (Make

:-L&T/Siemens/ABB/C&S/Havells)

367 Providing and erecting Approved make Four pole moulded case circuit breaker 10.00 Nos. 8055.76

having breaking capacity ICU of 35 KA. at 415 V. having normal current rating

125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s.

with all internal connections, spreader tinned copper & complete erected in existing

16 G.M.S. housing ICS=100% of ICU only Cat III (Make :-

L&T/Siemens/ABB/C&S/Havells)

368 Providing and erecting Approved make Four pole moulded case circuit breaker 3.00 Nos. 20946.39

having breaking capacity ICU of 35 KA. and above at 415 V having normal current

rating 250A. with variable thermal & magnetic release suitable to work on

A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III.

369 Providing and erecting Approved make Earth fault Relay suitable to mount with 1.00 No. 5415.62

inter connection suitable to following size of moulded case circuit breaker having

CT ratio & MCCB rating as following along with shunt trip 220V AC. with all

internal connections & complete erected in existing M.S.housing. (3) 250 A-400 A,

CT Ratio 1/400.

370 Supplying & erecting approved make Four Pole 415V change over switch interior 1.00 No. 13353.21

for panel mounting with operating mechanism A.C.23 duty confirming to IS for

(E)250A / 320A Cat-lll (Make :-L&T/Siemens/ABB/C&S/Havells)

371 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper 2.40 Rmt 3202.71

Busbars with four equal Nos. of electrolyte bus having current density not more than

1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour

insulating tape for phase sequence of following current carrying capacity, erected

with necessary bus bar supports /insulators, main cable socket to each bar, erected in

existing cubical panel with necessary connections. (B) Suitable for 200 Amp.

capacity (Make :-L&T/Siemens/ABB/C&S/Havells)

372 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper 2.50 Rmt 4909.61

Busbars with four equal Nos. of electrolyte bus having current density not more than

1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour

insulating tape for phase sequence of following current carrying capacity, erected

with necessary bus bar supports /insulators, main cable socket to each bar, erected in

existing cubical panel with necessary connections. (C) Suitable for 300 Amp.

capacity (Make :-L&T/Siemens/ABB/C&S/Havells)

373 Providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and 34.00 Nos. 270.68

having breaking capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III (Make :-L&T/Siemens/ABB/C&S/Havells)

374 Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to 374.00 Nos. 112.11

operate on 240 V A.C system and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III (Make :-

L&T/Siemens/ABB/C&S/Havells)

375 Providing & erecting 240 V MCB double pole switch for motor & inductive load 15.00 Nos. 330.27

(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box

having following capacity (B) 40 Amp. Cat.III (Make :-L&T/Siemens

/ABB/C&S/Havells)

376 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 28.00 Nos. 668.62

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity (b)40 Amp. Cat.III (Make :-L&T/Siemens/ABB

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

377 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C 27.00 Nos. 737.30

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity (c) 63 Amp. Cat.III (Make :-L&T/Siemens/ABB

378 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / 3.00 Nos. 629.23

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing (b) sheet steel

double door (IP-43) (i)4 way.

379 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / 1.00 No. 1152.41

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing (b) sheet steel

double door (IP-43)(iii)8 way (Make :-L&T/Siemens/ ABB/C&S/Havells)

380 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / 1.00 No. 1492.78

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing (b) sheet steel

double door (IP-43) (iv)12 way (Make :-L&T/Siemens /ABB/C&S/Havells)

381 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / 20.00 Nos. 2913.85

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be used) suitable

for(B) three phase incoming and single phase horizontal type outgoing Per phase

isolation type (PPI) (b) sheet steel double door (ii)6 way (Make :-

L&T/Siemens/ABB/C&S/Havells)

382 Providing and erecting Approved make RCCBs conforming to IS: 12640 and 62.00 Nos. 2235.13

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V, 50Hz. having characteristic of quick

action & tripping with all advance feature & do not incorporate any electronic

component. for following Max. rating erected as directed (ii) 40Amps. DP Cat. III

(Make :-L&T/Siemens/ABB/C&S/Havells)

383 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 45.00 Kgs. 794.87

384 Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. 25.00 Nos. 368.65

galvanised iron pipe with coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

385 For using salt and charcoal / coke as required for pipe type earthing. 25.00 Nos. 171.70

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

386 Supplying & erecting earth pit of minimum bore dia.150mm size approved make 11.00 Nos. 4591.46

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made

of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-

200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic value surrounded

by highly conductive compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover. (A)(approved make OEM

has to submit test certificate including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to ensure the value of

earthing resistane mentioned in test Certificate) & having back filling compound of

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per

IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be submitted by Agency. (a) For

Electrical Installation up to 440V in normal soil Length of pipe - 1 Mtr Back filling

compound - 1 Nos Bag of 15 Kg.

387 Providing & erecting weather proof, dust & vermin proof, floor mounted front 7.00 Smt. 10468.65

operated indoor type cubical panel board necessary IP-42 and above protection as

per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for

outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with

necessary accesories, supporting angles/ flats channel including cutting, bending,

drilling, welding, riveting with internal partitions & cable alley as per requirements

& instruction of engineer-in-charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium

strips, rubber grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient

nos. of hinged doors, handles with locking arrangement and rubber gasket, heavy

duty end terminal connection, danger notice board,necessary ventilation,earthing

strip complete. The Panel shall be painted with epoxy powder coating. (The rates

excludes the cost of switchgears, bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding

base beams) The panel shall be supplied with following approved manufacturers

with following size. (A) locally fabricated panel board (i) with 350 mm depth.

388 Providing, erecting, fabricating the M.S. structure as per requirement on site 135.00 Kgs. 77.77

incorporating proper size of M.S. angles,square,round, flats, bars, channels, sections

complete with cutting, welding, grinding & finishing duly painted with one coat of

red oxide with erection on site as per direction of engineer in charge with necessary

grouting, cementing, plastering & finishing complete.

389 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable Aluminium 80.00 Mtr. 92.92

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables. (B) 2 core 6 Sq. mm (Make :-KEI/RR

Kabel/Havells/Polycab)

390 Providing and erecting XLPE(IS:7098) (I)-88 ISI armoured cable multistrand 390.00 Mtr. 378.75

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (D) 3 1/2 core 70 Sq. mm (35 Sq.

mm 1/2 core) (Make :-KEI/RR Kabel/Havells/Polycab)

391 Providing and erecting XLPE(IS:7098) (I)-88 ISI armoured cable multistrand 375.00 Mtr. 540.35

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (F) 3 1/2 core 120 Sq. mm (70 Sq.

mm 1/2 core) (Make :-KEI/RR Kabel/Havells/Polycab)

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

392 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid 1800.00 Mtr. 126.25

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (B) 4 core 6 Sq. mm (Make :-

KEI/RR Kabel/Havells/Polycab)

393 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand 80.00 Mtr. 190.89

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (B) 4 core 25 Sq. mm (Make :-

KEI/RR Kabel/Havells/Polycab)

394 Making trench in soft soil of suitable width of 90 cm deep for laying cable or 2222.00 Mtr. 55.55

locating the fault all over the run and back filling the same and making the surface

as normal ground.

395 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required 252.00 Mtr. 357.54

depth for laying any size of cable or locating the fault all over the run and back

filling the same and making the surface as normal ground. (B) If additional

machinery like hammer driller or JCB use [Add].

396 Providing & laying approved make ISI marked HDPE 6Kg / cm2 (Class-3) as per 1780.00 Mtr. 163.62

IS:4984:1995 PE-80 to be erected at road crossing on or floor as directed for laying

of cable. The pipes as following size of dia & weight per 6 mtr. (B) 50 mm inner

397 Providing & laying approved make ISI marked HDPE 6Kg / cm2 (Class-3) as per 601.00 Mtr. 732.25

IS:4984:1995 PE-80 to be erected at road crossing on or floor as directed for laying

of cable. The pipes as following size of dia & weight per 6 mtr. (F) 110 mm inner

398 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for 20.00 Nos. 38.38

PVC insulated armoured cable complete with out going tails, insulating tape etc for

following size of cables. (B) 2 to 4 core 6 Sq. mm.

399 Providing and fixing heavy duty flange type brass double compression type cable 6.00 Nos. 103.02

gland with rubber ring for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables. (C) 3 & 1/2 core 70 Sq. mm

400 Providing and, fixing heavy duty flange type brass double compression type cable 4.00 Nos. 140.39

gland with rubber ring for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables. (E) 3 & 1/2 core 120 Sq. mm

401 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 136.00 Nos. 6.06

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass / cadmium plated nut bolts in an approved manner. (A) 1.5/

402 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 6.00 Nos. 20.20

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass / cadmium plated nut bolts in an approved manner. (D) 35/50

403 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 22.00 Nos. 25.25

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. (E)

404 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 12.00 Nos. 45.45

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. (G)

405 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with 254.00 Nos. 1948.29

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep

complete having 3blades with aluminium blades with canopy & 30 cm. down rod

erected with earthing. (Make shall be approved by Engineer in charge)) (Make :-

Bajaj/Crompton/Havells/Orient/Usha)

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

406 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down 254.00 Mtr. 108.07

rod erected duly painted for fan complete with proper insulation without leakage and

407 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC 254.00 Nos. 108.07

bars up to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy

Duty PVC box complete erected concealed in Ceiling with necessary finishing.

408 Supplying and erecting approved make Octagonal pole made from HR sheet steel. 12.00 Nos. 5556.01

The pole should be made as per IS. and shall be coated with hot dip galvanizing as

per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement

for cable termination to be erected With Suitable foundation (Included) as per

details given by manufacturer considering site requirement. (B) 4 Mtr. Long 70 mm

Top X 130 mm bottom dia, 3 mm thickness with 200mmX200mmX12mm base

plate, 4-M16 Bolts and 450mm long with necessary G.I. J Bolts. Approx weight

kg (Make :- Transrail/Valmont/Bajaj/Jindal/Ambika)

409 Supplying and erecting approved make Octagonal pole made from HR sheet steel. 11.00 Nos. 8192.11

The pole should be made as per IS. and shall be coated with hot dip galvanizing as

per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement

for cable termination to be erected With Suitable foundation (Included) as per

details given by manufacturer considering site requirement. (D) 6 Mtr. Long 70 mm

Top X 135 mm bottom dia, 3 mm thickness with 200mmX200mmX12mm base

plate, 4-M20 Bolts and 600mm long with necessary G.I. J Bolts. Approx Pole

weight 59 kg (Make :- Transrail/Valmont/Bajaj/Jindal/Ambika)

410 Supplying & erecting approved make SMC press moulded composite FRP. loop- 10.00 Nos. 476.72

in, loop-out approx. 2mm thick box complete with Bakelite connector strip 5way

(3P+N+E), DIN rail for mounting mob & hinged doors as per requirement having

locking arrangements with mounting clamp with nuts, bolts & washers suitable for

erection on pole with cable clamps & earth bolt of following size of box. (C)150mm

x 125mm x 100mm [deep].

411 Supplying and erecting Street light pole bracket comprising main B Class GI pipe of 10.00 Nos. 491.87

4.2 cm/require outside dia. complete with suitable B Class G.I. sleeve tubing of

approx. 45cms.length and suitable for 76.5mm/80mm/require size of pole top

having nuts and bolts for fixing the brackets and having spread of 0.5 mtr. Length

with 110 deg.with vertical plane and suitable welded stiffener reducer and nipple

with check nut complete painted with one coat.of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following nos of arms. [A] Single

Arm bracket 0.5 Mtr.

412 Supplying and erecting Street light pole bracket comprising main B Class GI pipe of 1.00 No. 622.16

4.2 cm/require outside dia. complete with suitable B Class G.I. sleeve tubing of

approx. 45cms.length and suitable for 76.5mm/80mm/require size of pole top

having nuts and bolts for fixing the brackets and having spread of 0.5 mtr. Length

with 110 deg.with vertical plane and suitable welded stiffener reducer and nipple

with check nut complete painted with one coat.of Red oxide / PU base primer and

two coats of Aluminium / PU paint. paint with following nos of arms. [B] Double

Arm Bracket 0.5 Mtr.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

413 Supplying & erecting IP 55 grade following size section pillar fabricated from joint 4.00 Nos. 16691.26

less M.S. Sheet with angle iron legs made from jointless M.S. Angle with cable

clamps to be buried in ground to have appropriate erection to work uniform until

erected with cement concrete foundation and 45 cm high bricks work finishing with

plaster etc. hinged double door internally supported on both side, with internal and

outside looking arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S.

Angle of Two Nos. one is welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with three tank powder coated

paint. section pillar roof should be without joint with water leakage proof & tested

as per IP 55 test & followed by IS 2147 of 1962 (A) 150 X 90 X 75 cm section

pillar fabricated from 14 Gauge MS Sheet with angle iron legs 95 cm long made

from 40 X 40 X 6 mm thick MS angle.

414 Supplying & erecting approved make Digital time switch having lithium cell 6 years 1.00 No. 3168.37

operative and operate battery backup 1 channel day clock with 14 memory

programme, suitable to operate on 240V + 5%, 16A with floating contacts Minimum

switching setup time 1 minimum & LCD display. Also comprised permanent

ON/OFF switching. Programming switches & housed in fire proof thermoplastic

enclosure & transparent cover erected as required with necessary connection erected

415 Supplying & erecting power contactor, AC3 duty for time switch complete erected 1.00 No. 2782.55

as per direction Cat III (D) 4 pole 440V 40 Amp.

416 Providing & erecting water cooler having storage capacity 150 Ltr. & cooling 7.00 Nos. 55893.40

capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water

should drop by 15˚C within a hour, The water cooler should be comprising of

hermetically sealed compressor, fan motor, condensing unit, water tank surrounded

by evaporating, coil, thermostats, relay etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made from Stainless Steel. (Make :-

Voltas /Usha/Bluestar)

417 Supplying & erecting reverse osmosis (RO) water purification system with M.S. 2.00 Nos. 175895.54

powder coated pedestal frame, prefilter housing carbon filter suitable buster DC

pump, auto low & high pressure switches with following size of LPH capacity &

erected as directed [F] 500 LPH with 3 phase Raw water pump of 1000LPH @

kg/cm2 (1No - Kirloskar /CRI /Lubi), Dual media filter 13"x54" - (1No), Micron

catridge filter 20" x 4.0"-1No, High pressure pump 1000LPH @ 11kg/cm2 - (1No -

lubi/ Shimge/ CRI), RO Membrane housing with RO membrane of 40*40 - (2 Nos),

RO pressure tube 4" x 2E -(1No), 0-2400 LPH Rotameter (2 Nos), Dosing pump 0 -

6 LPH - (1 No), with 100 Ltr Dosing tank - (1 No), with Recovery Rate 50%.

418 Supplying, installing, testing & commissioning of SOLAR WATER heating system 4.00 Nos. 102530.15

as per prevailing IS code comprising of Solar flat locket collector, stainless steel hot

water storage isolated tank with S.S. heat exchanger, absorber made of copper sheet

& copper tube of following capacity in liter / day (LPD) with "B" size aluminium

box collector with appropriate capacity electrical backup arrangement (Excluding

inlet & outlet pipe lines) (D) Capacity of 500 LPD.

419 Supplying and erecting approved make panel mounting type Digital Voltmeter 1.00 No. 1275.63

having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel

board with all connection, wiring etc .with manufacturers calibration certificate.

420 Supplying and erecting approved make panel mounting type Digital Ammeter 1.00 No. 1558.43

having 3 digits LED display, external CT operated, calibrated for 0 to 1000 Amps

suitable to operate on 500 Volt AC, erected on existing panel board with all

connection, wiring etc. with manufacturers calibration certificate.

421 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC 2.00 Nos. 317.14

Supply 500 V on existing panel board with necessary connections.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

422 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 3.00 Nos. 274.72

ratio 15 VA burden erected in existing CRCA box duly secured with insulating

materials connected to the meter.

423 Supplying and erecting approved make suitable panel indicator LED type lamp, lens 12.00 Nos. 43.43

cover, complete erected with necessary connections.

424 SITC of Vertical Air Termination Solid aluminium with Base-10 mm dia and 1000 8.00 Nos. 9416.23

mm long. Air Termination Base tested for conditioning, Ageing Test & Lightning

impulse current withstand test: 100 kA of 10/350µs waveform in an accredited

Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol with MAST

34mm dia 3000 mm long- Cold Galvanized.

425 SITC of 8 mm dia solid Aluminium Conductor for roof top mesh grid and tested as 317.00 Mtr 299.97

per IEC 62561- 2 conducted in the Govt. accredited thirty party laboratory to meet

the requirement of IS/IEC 62305 with Required Accessories - Aluminium Holding

clamp at every 1 mtr distance, Aluminium / SS cross splicer at every crossing of

Alu. conductor, Expansion piece with connectors at every 20 mtr distance,

Aluminium straight Splicer to connect conductors. All Accessories should be tested

as per IEC 62561-1 2018 Cl. 6.3 for conditioning & Ageing Test & 6.4 for

Lightning impulse current withstand test: 100 kA of 10/350µs waveform (Ageing &

Electrical test) conducted in a sequence manner & tested in the Govt. accredited

Third party laboratory to meet the requirements of IS/IEC

426 SITC of Galvanized Steel Flat 25x6 mm thickness from earth electrode directly in 386.00 Mtr 154.53

ground as required. Zinc coating: 500 g/m square (Approx:70 micron coating) tested

and used exclusively for lightning protection earthing system and ring equipotential

427 SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 8.00 Per Set 5992.33

250 micron copper bonding & 1 bag of Carbon fill Based environment friendly

backfill tested as per IEC 62561-7 in NABL accredited Laboratory and suitable

stainless Steel double sided clamp. Eco Friendly rust proof heavy duty weather

proof Polyethylene Earth Pit Chamber with following dimensions :254 mm dia (top),

330 mm dia (bottom) & 260 mm (height).

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

428 Supplying, Erecting, Testing & Commissioning the passenger/ stretcher MRL lift having following 1.00 No. 1815111.40

main features: (A) GENERAL DESCRIPTION OF LIFTS. [1] GEAR LESS LIFT DRIVE (MRL)

comprising of High Starting torque Lift 3 phase 440 V A. C. Permanent Magnet Synchronous motor

of proper rating with high efficiency shall be used. [2] Micro processor based / PLC, ACVVVF,

vector control drive with encoder feedback closed loop system shall be used for lift car and door

operation which shall be full collective selective operation hall call demand response, UP/DOWN

hall stops, Main, Up/ Down Contactor with overload and phase reversal relay and safety controls.[3]

Car with M S platform with bracings of adequate size and to sustain the impact load cabin +

passenger with safety factor of fire for steel and side panels of Stainless steel of sheet of grade

duty. Car ceiling will be S.S. finishes with aesthetic appearance with LED ceiling lights. Car flooring

shall be of anti skid PVC with choice of colour of engineer in charge. Car doors shall be of stainless

steel grade 304, hairline finish with centre opening / telescopic automatic doors. Car panel will also

be S.S. 304 finished with emergency stop device, mechanical door safety device, facility of auto/

attended mode. All car panel buttons and all floor switches must be with brail language as per lift

act.[4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/

telescopic opening made of hairline finish steel grade of 304 with key holes and infrared curtains

with Unlocking facility from outside [5] Appropriate battery operated emergency light in the car

along with alarm switch shall be provided. Also, Emergency Light & Fan should start immediately

without any Time Delay as soon as power fails. [6] Digital scrolling indicator system for up-down

arrow along with floor position indicator shall be provided inside the car and at all floors. [7] Full

height infra red curtain with multiple cross / crossing light beams shall be provided.[8] Automatic

Rescue Device (ARD) shall be provided accordingly of passenger capacity with Manual Rescue

Operation ( Manual Cranking Facility). [9] Audio visual indication in the lift car showing over

loading shall be provided such that doors kept open till excess load is removed.[10] Spring

buffers/PU Buffers shall be provided. [11] Car fan as per passenger capacity with automatic sleep

timer shall be provided.[12] Voice annunciator with suitable music shall be provided in lift car. [13]

Self diagnostics system for operational and safety parameters shall be provided in control panel. [14]

Mechanical over speed governor with governor calibration as per actual site parameters and

submission of calibration certificate submission, door key holes in the floor doors, fireman switch

shall be provided. [15] Lift machine hoisting arrangement in the lift machine room and monkey

ladder for lift pit should be provided by the lift agency, along with the other steel structure works,

foundations for the machine etc. [16] In the hoist way fascia plate shall be provided without any extra

cost, where ever required as / if directed by engineer in charge.[17] Permanent wiring with necessary

safety devices like RCCB in all circuit, Over Voltage Under Voltage protection and THD eliminator

in circuit for lift machine room and lift well with proper numbers of light points, with fixtures,

exhaust fan and plug points shall be provided by the agency. Only 3 phase Power Supply shall be

made available by department in lift machine room. Necessary Earthing as per Lift Act/Rules shall be

arranged by Lift Agency. [18] Any civil/ electrical works for additional and alteration in lift shaft and

machine room related to erection of lift shall be made by lift agency without any extra cost.

(granite/marble fixing around all landing door openings are not in lift agency’s scope.)[19] Agency

has to provide all working drawings and documents and liaison services for obtaining all necessary

permission from lift inspector and other authorities. [20] acrylic transparent licence/display A4 size

holder in lift car [20A] As per statutory requirement of Govt. Of Gujarat lift & escalator act 2000, lift

agency has to provide 1. Car top safety barricade 2. Push & talk communication system. 3. Fireman's

switch operation at Ground Floor. 4.carrying out third party lift inspection during/after lift erection

and provide report by third party authorized by concern licensing authority 5.agency has to provide

third party insurance upto completion of free maintenance period and submit the document for the

same.[21] Car Panel Operating Buttons with floor position indicator/buttons must be of Auto Glow

type clearly visible when view from inside cabin. [22] For Physically Handicapped person Full

Length Handrails of hairline finish steel grade of 304 should be provided at appropriate height on the

Rear & Side Wall Panels in Lift Car. [23] With Necessary KVA rating voltage controlled Stabilizer

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

suitable for your controller, drive and all equipments of lift. [24] Necessary rating of DP Elcb and FP

Elcb required for lift is in scope of work which rating is sugested by CEICED Department

(electrical Inspector) (B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM category

1. Advanced control system dual 64 bit embedded microprocessor with CANBUS Serial

Communication mode including Regenerative power efficient operation,on site programming facility,

Anti nuisance, Pte-opening, BMS/RMS with necessary online real time monitoring system having

necessary connectivity for remote monitoring & other suitable supporting hardware & software

devices to fulfil the purpose.2. Floor Indication LCD Display with call registration & brail mark with

arrival gong and hall lantern & TFT Screen in the car with MP3 Voice Announcer.3. CAR Panel

should be Scratch resistive SS Moonrock finish / Hair Line / Honeycomb for car and all Doors, All

landing doors must have fire rating up to 2 hours and car door must have multi-level crisscross beam

door protection.4. To & fro communication system & wiring (i.e. car , control room & guard room )

and Each elevator are equipped with remote monitoring system.agency has to provide mobile app

and user id and password for monitoring 13 Passengers, Ground plus 3 upper floors with Rated

Speed of 1.0 m/sec., (C) With General PLUS ADDITIONAL SPECIAL FEATURES attached

herewith. Cat.III (Make :- Otis/Johnson/Schindler/ Orbis/Trio)

429 Supplying & erecting single phase approved make industrial exhaust fan suitable for 44.00 Nos. 2054.34

medium duty ring mounted low noise operation suitable for medium duty having

following dia size and maximum speed in RPM [A] 305 mm dia 900 RPM Cat.II

(Make :- Bajaj/Crompton/Havells/Orient/Usha)

430 Supplying & erecting Amplifier having following specification: Power Output 5.00 Nos. 11298.87

:250W (RMS) (300W Max.) inputs : 6 Misc. & 2 Aux. frequency Response :50-

1500HZ I3db Tone Controls :Cut & Boost type LED Meter :5 LED Arrays The

amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with automatic

changeover from AC to Battery operation, duly protected by wrong Battery Polarity

connections. [Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

431 Supplying & erecting Booster Amplifier having power output of 25OW (RMS,), 5.00 Nos. 9672.77

suitable to obtain combined power output of two, with 6 mike inputs & suitable to

be used independently as a 250watt amplifier in combination with mike & mixer.

The booster Amplifier shall be without mike &Aux. input channels, The system

shall be suitable to operate on 24OV. A.C. & 24 Volts D.C. Battery. [[Approved by

Competent Authority i.e. not Below the rank of Executive Engineer]

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

432 Supplying & erecting Mixing Console having channels, Audio mixer with. Echo 1.00 No. 18386.04

facility for live performance, Auditorium & stadiums, having following features &

facilities. [Approved by Competent Authority i.e. not Below the rank of Executive

Engineer ] (a)input Channels :- Each channel has separate 6.25mm size balanced

phone jack for mike & line for balanced & unbalanced signals.(b)Individual gain

control for sating optimum level for minimum noise. (c) BASS, MID & TREBLE

controls Separately for each input channel.(d) ECHO control for each channel

(e)PAN control for echo channel for left or right output (f) AUX Control : To

control, level of the channel in final mix to AUX sound output (g)Channel ON/OFF

switch (h) ECHO Section :- ECHO, reverb & Chorus effect can be added to all

input channel by different setting of Delay, Reverb & Level control. (i)Tape section

(j) Aux. send & return For sending Pre-feeder output of channel for monitoring or

adding a special effect unit. (k) Mono / Stereo output controls (L)Master faders to

control over left & right output (m) Head phone output for monitoring purpose.

Technical specification (a) Power Requirement -AC220-24OV 50 Hz DC 24 Volts

(b) MIC Output Impedance/gain -2 K Ohms/ 62 dB (c) Line Output Balance/42

dB - 20 K ohms (d) Impedance / Gain :- 10Kohms unbalance / 42 dB (e) frequency

Response - 30 Hz- 20 KHz L / R Line Output (+ 0, -1 dB) (f) Equalization Bass/- +

/ - 12 dB at 100Hz Mid / Treble 2 KHz / 10 KHz (g) Outputs, Line Output Line

Output Low : -10 dB / -2 dBM Line Output High : 0 dBM / +17 dBM (775 mv /

V) (h) S/N ratio Line Output Level : > 70 dB (0 dB, 0.775V) The Console shall be

mounted on standard Rack, The channel of following numbers. (A) 14 Channel

Audio Mixer with ECHO.

433 Supplying and erecting Weather & Dust resistant sound column with Aluminium 6.00 Nos. 2055.35

case & Aluminium mesh grille with foam layer under grill, rotary- switch for

selecting power taps / impedance having frequency response 150-20000 Hz with

following specifications . [[Approved by Competent Authority i.e. not Below the

rank of Executive Engineer ] (a) With 4 speakers, capacity of power handling 45W

(MAX) & 30 W RMS, each speaker have impedance of respectively 300 ohms /

W, 500ohms/20W,I -K.ohms/10 W, 2K. ohms / 5W.

434 Supplying & erecting recess wall mounting speaker with 5W rated input power 3.3 64.00 Nos. 591.86

K. Ohms / 3W impedance, 100 - 10000 Hz frequency response with 6 inch dia. cone

type 8 ohms speakers duly fitted in ABS plastic cabinet of colour match with wall or

ceiling of following size. [Approved by Competent Authority i.e. not Below the rank

of Executive Engineer ] (b) Square shaped 260 x 260mm size speaker.

435 Providing and erecting cordless microphone with UHF Diversity handheld wireless 6.00 Nos. 5135.85

microphone/caller wireless complete with receiver and transmitter unit, Cardiod,

polar pattern,dynamic microphone, LCD display for battery and frequency status

and information ,32 preset channels,with compatible groups of 8 channels,14

hrs.battery life,frequency response 80Hz to 18KHz.,RF sensitivity <1.0 Uv,image

rejection > 55 dB,dynamic range >95 dB and receiver having 32 channels,S/N

ratio>100 dBA,Dynamic range>95 dB,distortion<1% [Approved by Competent

Authority i.e. not Below the rank of Executive Engineer]

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

436 Supply, Installation, Testing & Commissioning of following size of Grid Tied Solar Power Plant with 30.00 PER 42156.39

Solar Panels (ALMM approved): Frame Material : Anodized Aluminum alloy Frame With Twin Wall KW

Profile, Front Cover : High Transmission Low-Iron Tempered Glass (AR Coated), High efficency and

positive power tolerance Pmax: 0/+5, Module Efficiency should be approx.19.5%-22%, Normal

operating temperature 45'C, Junction Box with Waterproof IP67 & MC4 Compatible and Enclosed

with Bypass diodes, 100% Electroluminescence test to ensure error free Modules, Thep. temp. co-

efficient of the PV module shall equal or better than -0.45%/degree C. Solar PV modules of

minimum fill factor 75% to be used. Unit Production:- More than 4.5 Unit /kw /day (Actual)(1Year

Avg) With 10 year Product warranty and 25 year Linear Power Warranty includes all mechanical and

electrical parameters of the Solar panel. Modules must be complied to the DCR (Domestic content

requirements). The Ration of AC to DC is 5:6 for the Installation capacity which are given in AC

KW.Solar Inverter: MPPT Range: MPPT Range: 80-1000 V, Max efficiency: 97.5% - 98.9%, O/p

Frequency: 50/60Hz, Operating Altitude (m) ≤4000, O/p Power Factor: ~1, O/P THDi: <3%,

Operating Tempreture Range: -25~60°C, Integrated protection of Inverter are Anti-islanding

Protection, Input Reverse Polarity Protection, Insulation Resistor Detection, Ground fault protection,

Residual Current Monitoring Unit, Output Over Current Protection, Output Short Circuit Protection,

Output Over Voltage Protection, PV array string fault Protection. Protection Degree: IP65, User

Interface LCD & APP, Datalogger & Communication: GPRS / Wi-Fi. Integrated, Input Reverse

Polarity Protection Integrated, Insulation Resistor Detection Integrated, Residual Current Monitoring

Unit Integrated, Output Over Current Protection Integrated, Output Short Circuit Protection

Integrated, Output Over Voltage Protection Integrated, Protection Degree: IP65, User Interface LCD

& APP,Datalogger & Communication: GPRS / Wi-Fi, Module Mounting Structure: The mounting

(Rectangular pipe / square pipe / circular pipe) with requisite cross bars, nuts and bolts, etc. shall be

Hot deep galvanized with minimum 80micron coating. The Rectangular / square /circular hollow

pipe section used for the structure should have a minimum thickness of 2.0 mm. other than above,

the material thickness should be minimum 2.5 mm. A certificate of a structural engineer certifying

the strength and stability of the mounting structure to withstand the weight and wind speed of

km/hour throughout the life span of 25 years of the system, shall be submitted by the vendors.Hot

Dipped Galvanized steel coils. suitable arrangement for base plate for foundation , solar panel

mounting, the structure should be suitable for carry the load of solar panel,wiring, sprinkler system

etc. with necessary foundation work/wall mount, j bolt, anchor fastner etc. the nut bolt used for

installtion of stucture should be (SS 304) quality.The ground clearance of the bottom most edge of

solar panel shall not be less than 300 mm to 1200 mm or as per site’s technical/feasibility

requirement. a. Column –The minimum section (thickness) should be 60MM*40MM b. Rafter - The

minimum section (thickness) should be 60MM*40MM c. Purlin - The minimum section (thickness)

should be 40MM * 40MM Balane of System with necessary Swichgears (Suitabel size and protection

of ACDB & DCDB), inter connecting wiring, earthing system as per the CEIG drawing approval,

lightining arrester system as per the CEIG drawing approval, all liasoning work with various gov.

dipartment like state nodal agency, DISCOM & CEIG is included in agency scope (Excluding All

charges namely GEDA Application fees, Solar connectivity Charges, Meter connectivity Charges,

Meter testing Charges and system stability/strenthning charges.) (D) Grid Tied Solar Power System:

26 - 50 kW (3 - phase) 1. The rate for the solar rooftop system shall be inclusive of a five-year AMC.

The agency must maintain and repair the solar system for a period of five years at no additional cost.

2.The agency must clean the solar system once every two months. 3.The agency must provide real-

time on-site data on a monthly basis without fail. 4.The agency must submit an FDR equivalent to

10% of the estimated cost of the solar rooftop system at the time of bill finalization, in the name of

“Executive Engineer, Electrical R&B Division, Surat.” This FDR will be released after successful

completion of five years.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

437 Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS: 4722:1968 & 1.00 No. 1029194.04

BS:5514 having continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed

air/water cooled diesel engine with multi-cylinders developing suitable BHP not less than following capacity at

1500 RPM with 10% overload for one hour in 24 hours with standard accessories like fly wheel, lubricating oil

cooler, "A" class governor, heavy duty fuel wheel and lubricating oil filter, oil bath air filler, lubricating oil

pressure gauge, end exhaust manifold, standard set of tools with adjustable spanners, screw drivers, cylinder head

to cover, joint cylinder head to exhaust, element lube oil filter, 12 / 24 volts electric starting equipment complete

with standard heavy duty battery, dynamo, cut-outs, ammeter, necessary wiring, pressure gauge, starter etc and

heavy duty Residential type exhaust silencer (With DEF System) and vertical hot air duct both logged with

asbestos rope, save oil trays, exhaust piping of required length, standard wall/floor mounted fuel with level

indicator and piping and drip proof alternator, self excited, self regulated, screen protected, with excitation

system, capable of delivering the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at

RPM, conforming to IS-4722- 1968 with voltage regulation +/- 5% of rated voltage from no load to full load.

Both the engine and alternator fitted on a common fabricated steel base plate with antivibration mounting engine

and alternator both connected to each other by flexible flange coupling and with floor/wall mounted control panel

box comprising of voltmeter ammeter, selector switches, ACB / MCCB / MCB of adequate capacity, indicator

lamps duly wired with HRC fuses. The alternator & control panel shall be connected with provided suitable

capacity armoured cable and complete with Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet,

sound absorbing material Rockwool of 64 density & 100 mm thick conforming to IS:8183 / PU Foam of

Density - at least 40 mm. The resin bonded rockwool covered from inside the canopy by perforated sheet with 3/4

mm holes, sound level not more than 75 dB at a distance of 1 mtr, as per PVCT norms.DG set should have in

built fuel tank capacity of minimum 8 hrs of continous running capacity on full load . Erection, commissioning

and satisfactory testing as per requirement with first filling of fuel (minimum up to the 80% of fuel tank

capacity), oil, etc. with guarantee / Warrantee of complete system for Two years. & with obtaining all necessary

certificate from Electrical Inspector. The Capacity and Ratings of DG sets are as below. (As per new CPCB4+

Emission norms Engine With - Turbo Charger, EGR (Exhaust Gas Recirculation), CRS (Common Rail Fuel

System), DOC (Diesel Oxidation Catalyst), SCR (Selective Catalytic Reduction), Integrated wiring harness

connected to ECU .) (M) Continuous rating of 125 KVA ,BHP not less than 154 BHP (Make :-Kirloskar/

Cummins/Greaves Cotton/Ashok leyland.

438 Supplying and erecting horizontal / vertical mounting type storage water heater with 3.00 Nos. 7808.31

copper container housed in M.S./S.S./ABS body insulated with glass wool/puff

complete with heating elements,adjustable thermostats 300C to 850C, indicating

lamp, safety valve, fusible plug, etc.complete erected with coach bolts, nuts.

washers & cementation (B)15 Ltr-.with 2 /3K.W. heating element Cat.III (Make :-

Havells/ Recold/ AO Smith/ Crompton)

439 Supplying and erecting horizontal / vertical mounting type storage water heater with 8.00 Nos 9564.70

copper container housed in M.S./S.S./ABS body insulated with glass wool/puff

complete with heating elements,adjustable thermostats 300C to 850C, indicating

lamp, safety valve, fusible plug, etc.complete erected with coach bolts, nuts.

washers & cementation (C)25 Ltr. with 2 KW. heating element Cat.III

440 Supply of Fiberglass Step (A Type) Ladder - 4 FT having following specifications. 2.00 Nos 10676.71

It should have nonconductive Structural moulded top, with Slots to keep tools close

at hand, inside Spreader Braces, Aluminium Feet with thick rubber tread,

nonconductive Full channel Fibreglass and two pairs of gusset support at the

bottom step. All gussets are heavy duty steel. Capacity : 300 lbs.Step Size : 3”

Width : 19” “Approx. Spread : 29” Approx. Wt. :8 Kg Approx. Cube : 4.05’

441 Supply of Fibreglass Step (A Type) Ladder - 6 FT having following specifications : 2.00 Nos 13940.02

It should have nonconductive Structural moulded top with Slots to keep tools close

at hand, inside Spreader Braces, Aluminium Feet with thick rubber tread,

nonconductive Full channel Fibreglass and two pairs of gusset support at the bottom

step. All gussets are heavy duty steel. Capacity : 300 lbs. Step Size : 3” Width : 23”

“Approx. Spread : 41” Approx. Wt. : 11 Kg Approx. Cube : 6.2’

442 Supply of Fibreglass Platform Step (A Type) Ladder - 8 FT having following 1.00 No. 23726.92

specifications : It should have large fully serrated platform 15” wide 20” deep which

locks ladder, Aluminium feet with thick rubber tread, top rail guard to serve as a

railing, two pairs of gusset support at the bottom step and All gussets are heavy duty

steel. Capacity : 300 lbs. Step Width : 3’ Approx. spread : 62” Width : 29.5”

Approx. Wt. : 22 Kg Approx. Cube : 11.62.

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

443 Supply of Fibreglass Platform Step (A Type) Ladder - 10 FT having following 1.00 No. 27978.01

specifications : It should have large fully serrated platform 15” wide 20” deep which

locks ladder, Aluminium feet with thick rubber tread, top rail guard to serve as a

railing, two pairs of gusset support at the bottom step and All gussets are heavy duty

steel. Capacity : 300 lbs. Step Width : 4’Approx. spread : 75” Width : 32” Approx.

Wt. : 29 Kg Approx. Cube :

444 Supplying and Installation of Approved make Integrated LED Solar light fitting 10.00 Nos 22358.37

comprising in built Poly crystalline solar panel,Lithium-ion 3.7 V battery, LED CRI

Greater than 70, CCT-6500K, 80 lum/watt all housed in Extruded Aluminium

body,with motion sensor & auto on -off device erected on existing pole with

following specifications. (C) 18 watt LED light, with 22 W Solar panel, 3.7 V

to 40500 mAh battery, 1250-1350 lm luminus flux,suitable for mount on 3.5 to

mtr height pole.

445 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground 190.00 Mtr. 343.40

across the road crossing or on floor with necessary material in an approved manner

and making the ground as per original.(C) 300 mm dia.

446 Providing and fixing approved make Perforated C type cable tray. Made from sheet 95.00 Rmt. 622.16

steel. The cable tray should be single or double bended as per required and as per IS

2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759 with

max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut -

bolt and washers etc. erection with necessary support (included) as per Specification

and as per instruction of engineer in charge. (5) 300 X 50 X 2.0 mm Thick.

447 Smart 4G Timer, Supply of IoT based 4G Smart Streetlight Control & Monitoring System having a 1.00 No. 100427.33

Smart Panel comprising of 3 Phase IoT Streetlight Smart 4G Timer with 16x2 LCD to display RSSI,

relay status, RTC time & diagnostics., Controller works on 3-phase & also on any available 1-Phase.,

Controller with 8-hour battery backup during external power failure. External power failure alert

immediately to cloud., 110-630 V AC @ 50-60 Hz – 3 phase operating range., Standby power

consumption <3W., Smart 4G Timer with RS232 port for DLMS Energy meter., Smart 4G Timer

must be compatible with any make / brand of DLMS (RS232) Energy Meter., DI: 4 Nos. (3 Contactor

/ Latch detection, 1 for Door Sensor.)., DO: 3 Relays for Independent control each phase (R, Y, B)

with 1 extra spare relay., Smart 4G Timer with dual SIM functionality for connectivity backup., 4G

M2M SIM 3-Year communication included., Local configuration via WiFi / BLE for maintenance or

during force majeure., GPS chip inbuilt of Smart 4G Timer for auto location tracking & astronomic

schedule location., 50 programmable schedules., Astronomic scheduling with monthly offsets., Smart

4G Timer has inbuilt timer stores schedules locally & also stores schedule execution logs locally,

syncs to cloud whenever connected to cloud., Auto-scheduler overrides manual operations.,

Monitoring & alerts for MCB trips., Over/under voltage, current, overload, power factor & short

circuit protections with alerts via Dashboard, App, SMS, WhatsApp & Email., Contactor / Latch

chattering protection & alerts.,Smart 4G Timer with neutral failure protection and alert., Bulit-in

Watchdog for anti-jamming., Smart 4G Timer must send Regular "heartbeat" on software for CCMS

status., Accelerometer for tamper & panel movement detection & alerts., Smart 4G Timer must be

tested from an NABL Lab for Surge Test @ 6 KV (IEC 61000-4-5), ESD Test @ 4 KV (IEC 61000-4-

2), EFT @ 2 KV (IEC 61000-4-4), Conducted Emission @ 150 KHz-30 MHz (CISPR11), Damp

Heat Test (40 Deg C @ 95% RH) 2 cycles of 12+12 hours (IS: 9000 (Part 5/Sec.2):1981 latest) with

all test passing criteria as “Temporary degradation or loss of function or performance which is self-

recoverable”., FOTA functionality required for upgrades., Smart 4G Timer sends & stores

online/offline data of controller & load for lamp burn hours analysis., It stores & syncs connectivity

logs for configuration of network connections & analytics., PANEL & SWITCHGEAR, The panel

includes a Class 1 DLMS energy meter NABL approved with 1-2 months of stored data of daily,

hourly, monthly, load survey, instantaneous, events, tamper data & with power events stored in meter

memory for audit purpose., Must monitor V, I, KWH, KVA, PF, KVAH, etc., Panel made with 2 mm

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

1 memory for audit purpose., Must monitor V, I, KWH,

2 KVA, PF, KVAH, etc., Panel made with 2 mm 3 4 5

CRCA sheet with ground mountable stand complete with gland plate, waterproof glands, earthing

bolt., IP55, weatherproof panel with RAL7035 powder-coated., Smart 4G Timer must be fitted on

removable terminal sockets for easy maintenance., Switchgear includes 3 Nos. 3 pole Contactor /

Latch having minimum 50 A Load carrying capacity per phase, all other switchgear & wires: 40 A

load carrying capacity., 1 Nos. 4P MCB 10 kA for Incomer & 6 Nos. 1P MCBs 10 kA for Outgoing.,

Phase-Wise Bypass MCBs required., 4P RCCB 100 mA., door sensor. Also, provide lock & key

facility., Panel mount outdoor antenna for GSM, GPS., Canopy design for draining down water.,

CCMS SMART SOFTWARE, OAuth 2.0 APIs for sending data to Government clouds/software, etc.,

CCMS Web dashboard with secure password & OTP login., Hosted on trusted cloud, data security,

antivirus & attack protection., HTTPS., AES256-bit encryption., Vulnerability Assessment and

Penetration Testing (VAPT) certificate for CCMS Software., Streetlight management software for

load status, live analytics & reports., Energy meter data tables (kW, kWh, PF, I, V, etc.) available.,

Utility monthly bill reconciliation & Class 1 accuracy reports for billing, energy monitoring &

auditing for streetlight load., Fault detection., Light fault 99% analysis on dashboard using energy

monitoring., WhatsApp integration., Hierarchy-wise reporting & alerts., GIS mapping of live

connected streetlight control panels, poles & streetlights., MQTT protocol., Smartphone app with

local configuration & navigation., Monitoring & reporting of lighting parameters., Facility for media

attachments for site photos/videos/work permits/checklists, etc. per Feeder Panel for remote

verification., Asset management module for streetlight infrastructure data., Complaint/service task

management with history & escalation must be available., Android & iOS App for dashboard

analytics, graphs, energy data, alerts., 3 Years CCMS Web Software & Cloud Server Hosting

subscription included., Customizable, user-friendly dashboard.,

448 Supply, Installation, Testing and commissioning of 86" Inch Interactive E-Board, Touch 2.00 Nos. 366630.00

display In-built Android 14.0,Smart 4K Ultra HD Display, RAM: 8 GB, ROM : 128 GB

Working frequency : 2.4GHZ CPU : Quad‐core A76 + Quad‐core A55 3840*2160

Resolution/Contrast Ratio 4000:1 High precision IR touch makes the user write more

smoothly Eye protection, lock screen, touch lock and other tools Response time : 8ms

Max visual area 2450（H）× 1034 （V）mm Brightness (Typ) :400cd/m2 Speaker :‐

W *2 /Touch points : 20 points Bluetooth Version : 5.2 OPS with Intel Core‐i5 Processor

10th Gen, 8 GB RAM, 256 GB SSD, Microphones with Echo Cancellation 50000 Hours of

Life | 500 nits-Brightness Multiple Inputs for connectivity | Inbuilt Screen Sharing Software

| Slimmer Frame OPS Slot for On-Board Computer Connectivity (Including Five year free

maintenance with guarantee) Make: Samsung/LG/Sony or equivalent Android 14.0, 4K

Ultra HD Display.

449 Supply, Installation, Testing and Comissioning of 55" UHD Professional Display, 3.00 Nos. 97698.31

500 Nits Brightness, contrast ratio 50000:1, Operation: 24x7, Input ports: 1xVGA;

2xUSB 2.0, 4x HDMI 2.0 In, Secure USB 2.0 (Internal), RJ45, RJ12, RS232,

Optical SPDIF, 1xHDMI 2.0 out, Supports Daisy Chain, Speaker 2x10 W, 30-

degrees Tilting Installation, Open Content Management Support, Scheduler, USB-

Autoplay, AutoLaunch, HDMI-CEC, HDMI- Wakeup, Auto-switch on Failover,

Panel Lock, OSD Rotation, No Signal Power Off, Screen Saver, Pixel shift,

Scheduler, Videowall support, Remote control via LAN, Realtime Clock, Joystick,

Rocker Switch, Optional:SDM or OPS compatibility, Embedded IR, IR extender

option, Optional: Overlay Touch Kit Compatibility, Certifications: Safety, EMC,

CE. including 5 mtr. HDMI cable (Make :- Sony /Samsung/LGor equivalent)

(Rupees Ten Crore Two Lakhs Fourteen Thousand Four Hundred Sixty Eight and Paise Fifty One Only.)

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the estimated rates

mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 100214468.51 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

Items Description of Item (with Brief specification and reference to Book of Quantity Unit Rate In Amount

No. specification) Figures

1 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with detailed

specification and details of work and amount Involved at site without any payment as directed by Engineer-In-Charge.

2 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

3 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by Contractor under his

4 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work under all

condition, site, moisture/ weather etc.

5 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government Resolution

T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the work order.

6 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by Executive Engineer

Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to Tender.

7 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other Construction works

walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated 9/12/2005 notification Of Labour &

Employment department dt.03/01/2005 & Labou & Employment Department Letter no GWA/2004-841M(B) Dt 14/12/2005 &

8 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of Cement

Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.

9 Contractor are advised to visit site before loading tender rate.

10 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and drainage & water

supply connection and minor correction to perform experienced in Lab shall be done by contractor at his risk and cost.

11 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.

12 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

13 GST and Income tax TDS will be deducted at a source while making payments of bills.

14 GST will be paid extra as per Govt. amendment.

15 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding materials,Labour

(A) and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender Document of this

work and agree to execute the same accordingly.

Signature of Bidder Deputy Executive Engineer

Bardoli (R&B) Sub Division,

Executive Engineer Executive Engineer

Ele. (R&B) Division Surat (R&B) Division No.2,