Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹4.1 Craccepted-aoc | ₹4.1 Cr | accepted-aoc |
Tender Value
₹3.9 Cr
EMD Value
₹5.9 L
Closing Date
24 Feb 2026, 10:30 pmClosed
Cauvery Neeravari Nigam Limited
Aqib
Construction of Sub division Office Building Complex in KR Sagara
CNNL/2025-26/BD/WORK_INDENT4224/CALL-2
CNNL/2025-26/BD/WORK_INDENT4224/CALL-2
Open
Buildings
Two Tender Document System(Two Cover)
CNNL KRS Div KR Sagar
10 documents required · 10 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
The intending bidder/firm/company should have Executed in any one yearthe following minimum quantities of work in the last five years satisfactorily (2020-21 to 2024-25) Excavation/Embankment(cum)-3570.00 Cement Concrete(cum)-1100.00 Steel (t)-73.00 Masonary (cum)-520.00 Providing & fixing Any tiles(sqm)-940.00 Provinding and fixing steel work (kgs)-2400.00 Cement Plastering(sqm)-4160.00 NOTE: The criteria above applies to the Individual bidder/Firm/ also. Certificate regarding the same duly signed by an officer not below the rank of the Executive Engineer should be submitted along with the technical bid.
The intending bidder/firm/company should have Satisfactorily completed (at least 90% of the contract value), as prime contractor at least one similar work such as Improvements /Construction of any Buildings of value not less than Rs. 197.13 Lakhs (usually not less 50% estimated value of contract during the last five financial years from 2020-21 to 2024-25). Note: The certificates should be obtained from the competent authority that is not below the rank of the Executive Engineer (The cost of completed works of previous years will be given a weightage of 10% per year based to bring them to 2025-26 level rupee price value)
List of key technical personnel required for the work is as under: 1) Civil Engineer / Diploma Holders- Civil Engineering with Min 5 years experience-1no.
Each Tenderer should further demonstrate-(a) Availability by owning the following key and critical equipment for this work: The intending bidder/firm/company should furnish details of ownership of Machineries/Equipments etc., to an extent of more than 50% of the requirement and also should furnish copies of lease agreement of hiring of Machineries/Equipments etc., to be deployed for this work.1.Excavators- 2 Nos-1 no own,1 No Own/hire/Lease.2.Tippers-4Nos -2nos Own,2 Nos Own/hire/Lease3.Water Tankers 2 Nos-1 no own,1 No Own/hire/Lease.4.Transit mixer self loader-2 Nos-1 no own,1 No Own/hire/Lease
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e, 2020-21, 2021-22, 2022-23, 2023-24 & 2024-25, achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.788.52 Lakhs (usually not less than the two times estimated annual payment under this contract during the last five financial years from 2020-21 to 2024-25). Note: Audited balance sheet certified by practicing Chartered Accountant shall be furnished. (Additional weight age at 10% for each year will be given for turnover to bring it to 2025-26 price level).
The intending bidder/firm/company shall furnish details of liquid assets and / or availability of credit facilities of not less than Rs.118.28 Lakhs(Credit lines/letter of credit/certificates from any Nationalized banks for meeting the fund requirement etc. i(usually the equivalent of the estimated cash flow for three months in the peak construction period)
Tender Capacity calculation in prescribed format
₹5,000
₹5.9 L
16 Feb 2026
16 Feb 2026
25 Feb 2026
21 Feb 2026
20 Feb 2026
Construction of Sub division Office Building Complex in KR Sagara
Earth work in surface excavation by manual means for lowering & levelling the ground by chiselling and wedging in Hard rock for all works other than foundation & depth not exceeding 100 mm as per draw...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier underand around the column pits, walls, trenches, basement excavation,top ...
Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushedgraded coarse aggregates and fine aggregates as per relevant ISCo...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). Execute the work as directed by Engineer-in-Charge"
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Earth work excavation for pipelines/cables by Manual means upto 600mm trench width, as per drawing and technical specifications, includingsetting out, shoring, strutting, barricading, caution lights, ...
Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 co...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...
Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing & fixing of 3-track x 2-panel sliding windows made out of multichambered UPVC(Matching to RAL-9016) sections and with minimumTiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer)...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions ...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...
Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...
Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...
Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including co...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...
Providing & Fixing of Mineral Fibre Suspended Ceiling System inthe module size of 600x600x19mm with Exposed grid for Hospitals,Shopping malls, Commercial establishments and office complexes.The tiles ...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connecti...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32 mm nominal bore Execute the work as directed by Engineer-in-Charge"
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25 mm nominal bore Execute the work as directed by Engineer-in-Charge"
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...
Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confirming to IS.15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply...
Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confirming to IS.15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply...
Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confirming to IS.15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latestamendments and conveying to worksite, rolling and lowering intotrenches, laying true to line and level and perfect linking at joints,...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latestamendments and conveying to worksite, rolling and lowering intotrenches, laying true to line and level and perfect linking at joints,...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latestamendments and conveying to worksite, rolling and lowering intotrenches, laying true to line and level and perfect linking at joints,...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. Execute the work as directed by Engineer-in-Charge"
Providing and fixing brass bib cock of approved quality : 20 mm nominal bore. Execute the work as directed by Engineer-in-Charge"
Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid. Execute the work as directed by Engineer-in-Charge"
Providing and fixing 100 mm sand cast Iron grating for gully trap. Execute the work as directed by Engineer-in-Charge"
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster ...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the ...
Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the ...
Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and...
Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and...
Supplying and fixing PVC/metal conduit Deep junction box, 19/20 mm deep Junction box. Execute the work as directed by Engineer-in-Charge"
Supplying and fixing PVC/metal conduit Deep junction box, 25 mm deep Junction box. Execute the work as directed by Engineer-in-Charge"
Supplying And Fixing Metal Fan Box with Round Hook. Execute the work as directed by Engineer-in-Charge"
Supply and laying of under floor(concealed) race ways manufactured from1.5mm thick cover and base (including partitions for multi compartment raceways), zero spangle pre-galvanized sheet steel with ...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, ...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-6A One Way Switch. Execute the work as directed by Engineer-in-Charge"
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-6A Two Way Switch. Execute the work as directed by Engineer-in-Charge"
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-Stepped Fan Regulator Two Module. Execute the work as directed by Engineer-in...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-16A One Way Switch. Execute the work as directed by Engineer-in-Charge"
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-6/16A Universal Socket. Execute the work as directed by Engineer-in-Charge"
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293-RJ45/I.O Outlet Cat-6. Execute the work as directed by Engineer-in-Charge"
Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC supply & completely wired on existing box. Execute the work as directed by Engineer-in-...
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Bakelite Ceiling Rose. Execute the work as directed by Engineer-in-Charge"
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Batten Holder. Execute the work as directed by Engineer-in-Charge"
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers-100 A. Execute the work as directed by Engineer-in-Charge"
Supplying and fixing Moulded Case Circuit Breaker (MCCB)over the existing wood/panel board using necessary screws,bolts, nuts, necessary phase separators,handle and wiring complete. Protection of O...
Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC61439-3 and IK09 tested as per IS/IEC62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C'Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C'Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C'Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.16A-25A 2 pole. Execute the work as directed by Engineer-in-Charge"
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40A 4 pole. Execute the work as directed by Engineer-in-Charge"
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable forsingle phase 50Hz AC with latest microcontroller based, digital readout of percentage leakage cur...
Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood board. Execute the work as directed by Engineer-in-Charge"
Supplying, fixing and wiring 0 to 100A Direct Reading AC analog type Ammeter. Execute the work as directed by Engineer-in-Charge"
Supplying, fixing and wiring rotary selector switch suitable for Ammeter. Execute the work as directed by Engineer-in-Charge"
Supplying, fixing and wiring rotary selector switch suitable for Voltmeter. Execute the work as directed by Engineer-in-Charge"
Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter. Execute the work as directed by Engineer-in-Charge"
Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS2834.3 phase,400/440Vgrade, for power factor improvement of rotating machineries like induction motor. Execute the wor...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. Execute the work as directed by Engineer-in-Charge"
Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve,mounted on phenolic/FRP/DMC insulator wh...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron..and M.S.Flat......with bolts,washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint.-50 x...
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete- 12" Sweep (300 mm). Execute the work as directed by Engineer-in-Charge"
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984 with latest amendment, Rated voltage 220V/50Hz, Rated power upto...
Supplying ......TR split Air conditioners suitable for operation on A/C supply single phase 50Hz 230V with hermetically sealed compressor with air cooled condenser,motor capacitor and start run cap...
Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is tobe mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C. Execu...
Supplying & fixing retrofit type-PL- LED Lamp ...... W LED linear source with CCT 6500 degree K, CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 ...
Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Pow...
Supplying of recess mounting non integral type ........ LEDw luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500degree...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...
Supplying and fixing one of 230V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. Execute the work as directed by Engineer...
Supplying, fixing, wiring, earth electrode for grounding conduits,I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers,DG sets etc.using 40mm dia 2.9mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed on ...
GI strips for grounding connections, using necessary fixing materials as required.- 25 x 3 mm GI strip. Execute the work as directed by Engineer-in-Charge"
Copper strips for grounding connections, using necessary fixing materials as required.- 25 x 3 mm Copper strip. Execute the work as directed by Engineer-in-Charge"
Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / ...
Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. Execute the work as directed by Eng...
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...
Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying andfixing 5A. ceilingrose, necessary
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. Execute the work as direct...
Fixing a shunt capacitor of ... kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor-upto 5 kVAR. Execute the work as d...
Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated ...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ligh...
Supplying of 95 Sqmm, 3.5 Core, (21 GI Strips - 4 x 0.8 mm) XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring str...
Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable.Up to 3.5 x 70/95/120 Sqmm. Execute the work as directed by Engineer-in-Charge"
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT cable 35 to 95 Sqmm. Execute the work as directed by Engineer...
Making and Fixing pot head for LT Cable, Heat shrinkable Type Terminations 35 to 95 Sqmm. Execute the work as directed by Engineer-in-Charge"
Supplying, erecting, testing &commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz,A/C supply, with isolation transformer all accessories complete and Excluding batteries and wi...
Supplying, installation, testing & commissioning of 12VDC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 150 AH capacity. Execute the work as directed by Engin...
Supplying and drawing UTP-CAT 6E LAN cable. Execute the work as directed by Engineer-in-Charge"
Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable 2Pair. Execute the work as directed by Engineer-in-Charge"
Supplying & Fixing of switch mounting rack with power manager & Cable manager.12U with 450mm depth. Execute the work as directed by Engineer-in-Charge"
Supplying fixing of Network Switches 48 Port Gigabyte (manageable). Execute the work as directed by Engineer-in-Charge"
Supplying & fixing of I/O socket with back box Double I/O. Execute the work as directed by Engineer-in-Charge"
Supplying & Fixing of ... ms Cat 6 Patch Cable 2 m. Execute the work as directed by Engineer-in-Charge"
Supplying & Fixing of Patch panel for LAN cabling-48 Port 10/100 patch panel. Execute the work as directed by Engineer-in-Charge"
Supplying and fixing of MDF krone junction box with KRONE Module / Telephone cable termination. 50 pair. Execute the work as directed by Engineer-in-Charge"
Supllying and fixing Push Button Telephone. Execute the work as directed by Engineer-in-Charge"
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
4224 Sub Div building kw-4.docx
Tender Document • 5.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .